Smartview Addin upgrade and APS
We are on EPM 11.1.2.600 and APS version is 11.1.2.102 as is the Smartview addin. Business is looking at the feature set in later releases of the Smartview addin, specifically Smart Query and some of the VBA extensions of later versions.
We are currently an old Essbase addin shop, with plans to go to Smartview in the near future, so I am not as 'up to speed' on Smartview. My question is if we upgrade to the latest and greatest version of Smartview do I need to upgrade the APS server also? I downloaded 11.1.2.5.x and was able to connect to Essbase and planning without issues but I want to make sure all features/functionality is available. Thanks.
May I know which is your APS server , its recommended to use Web logic for latest version . May be there can be in compatibility if its web sphere !!
Similar Messages
-
Rolling upgrade of WLC 4402 controllers and APs
In need to upgrade the software on two WLC 4402 controller in a hospital. Both WLCs have the same config and one is primary (has all APs connected) and the other backup (no APs connected.) The APs are placed so there is still coverage if one goes down in an area. My question - is it possible to do a rolling upgrade to have no downtime for the wireless clients? My plan would be to upgrade the backup WLC then selectively move APs to it. If I swap the primary and secondary controllers in the high availability tab on each AP, do I need to do a reset (General - Hardware Reset) or will it automatically reboot and connect to the upgraded backup controller? When I'm done, I'd upgrade the primary controller and now call that backup. Does this make sense?
I've done this same sort of thing on a slightly larger scale about 5 times now at the hospital I work at. Quick answer is "Yes, it is possible to do a rolling upgrade and have no downtime for wireless clients."
I've got 5 WLC's, and I use the high availability tab to move all the AP's off one, upgrade it, and move all the AP's from the next WLC over to it, upgrade that one, etc.
The thing you need to be careful of is your timing and your choice of APs to move.
It generally takes about a minute to move an AP between WLCs running the same version. But if there's a version change that makes the AP upgrade, you're looking at about 6 minutes.
I do them one at a time, and when they show up in the WLC as being up, running and happy for 1 minute, I do the next one. And so on. Takes me about 3 days to go through all 5 WLCs and 375 APs. Not once have I had a user notice the move.
Also, in order to test, after I do the first upgrade, I move just one area's APs into that WLC for a day and then test the various flavors of gear we have (phones, infusion pumps, laptops, etc.) to confirm that the new version doesn't have any trouble. Sometimes it does and I work with TAC to get things resolved before I do the whole hospital.
jh -
Has anyone seen a problem when using the Smartview addin with VB? Recently upgraded the SV patch to (9.3.1.6) to fix Excel 2007 from shutting down abnormally.
I have a problem using the VB to copy/paste data with the addin. I can get the entire code to perform correctly if I disable the addin. However, that is defeating the purpose of the automation. I have it set up to connect, retrieve, then copy/paste values into a new workbook to send to users.I tried using the code in the supplied example, and I am still unable to export to Excel.
I am getting an output file, but it is 0 bytes in size (empty file).
If I change the export type to crReportExportFormatTabSeparatedText, then I get a file, an ugly file, but it does have the data.
Here is the code as it looks now
01 Dim myBytes As ByteArray
02 If strExpType = "14" Then ' word format
03 myBytes = rcd.PrintOutputController.Export(CrReportExportFormatEnum.crReportExportFormatMSWord)
04 ElseIf strExpType = "30" Or strExpType = "27" Then ' excel format
05 Dim exportOptions As New CrystalDecisions.ReportAppServer.ReportDefModel.ExportOptions
06 exportOptions.ExportFormatType = CrReportExportFormatEnum.crReportExportFormatMSExcel
07 Dim ExcelexportOptions As New ExcelExportFormatOptions
08 ExcelexportOptions.BaseAreaGroupNumber = 1
09 ExcelexportOptions.BaseAreaType = CrAreaSectionKindEnum.crAreaSectionKindReportHeader
10 ExcelexportOptions.ConstantColWidth = 20
11 ExcelexportOptions.ConvertDatesToStrings = True
12 ExcelexportOptions.StartPageNumber = 1
13 ExcelexportOptions.EndPageNumber = 5
14 ExcelexportOptions.ExcelTabHasColumnHeadings = True
15 ExcelexportOptions.ExportPageAreaPairType = CrExportPageAreaKindEnum.crExportPageAreaKindForEachPage
16 ExcelexportOptions.ExportPageBreaks = True
17 ExcelexportOptions.MaintainRelativeObjectPosition = True
18 ExcelexportOptions.ShowGridlines = False
19 ExcelexportOptions.UseConstantColWidth = True
20
21 exportOptions.FormatOptions = ExcelexportOptions
22
23 myBytes = rcd.PrintOutputController.ExportEx(exportOptions)
24 Else ' PDF Format
25 myBytes = rcd.PrintOutputController.Export(CrReportExportFormatEnum.crReportExportFormatPDF)
26 End If
Again, changing line 06 to
exportOptions.ExportFormatType = CrReportExportFormatEnum.crReportExportFormatTabSeparatedText
produces results.
I am using Crystal Reports 2008 v1 -
Best practice for Smartview when upgrading from Excel 2003 to Excel 2007?
Does anyone know the best pratice for Smartview when upgrading from Excel 2003 to Excel 2007?
Current users have Microsoft Excel 2003 with Smartview 9.3.1.2.1.003.
Computers are being upgraded to Microsoft Excel 2007.
What is the best pratice for Smartview in this situation?
1. Do nothing with Smartview and just install Excel 2007.
2. Install Excel 2007 and then uninstall and reinstall Smartview
3. Uninstall Smartview, Install Excel 2007, and then install Smartview
4. Somthing else??
Thanks!We went with option 1 and it worked out fine. Be aware that SV processes noticeably slower in Excel 2007 than 2003. Many users were/are unhappy with the switch. We haven't tested SV v11 yet, so I'm not sure if it has improved performance with Excel 2007 or not (hopefully it does).
-
I am upgrading the ERP and APS instances from 9.2.0.5 to oracle database 10.2.0.4.
Does that matter if the ERP instance is upgraded first or the APS? If so, which should be upgraded first and why?
Can we also upgrade either the APS or the ERP instance and not upgrade the other one?
Thanks,Didn't quite understand you... why do you need to know who the ERP or APS vendors are, the product names, or the product versions????
and what dont you get from my post?
Vendor - Oracle?
Product-Oracle Database?
Version - Upgrading from 9.2.0.5 to 10.2.0.4?
Anyways, I got my answer with some more research on google and metalink.
The answer is - It does't matter if the ERP database is upgraded first or the APS database. -
Start SmartVIew Addin with VBA
Hi,
I need to activate the Addin of SmartView via VBA code from an Excel Worksheet.
So far I created a worksheet and added the module SmartViewVBA to the VBA-Project.
I wrote a program to start the addin:
Sub Open_SMARTVIEW()
AddIns.Add Filename:="C:\Oracle\SmartView\Bin\HsTbar.xla"
AddIns("Oracle Hyperion Smart View for Office, Fusion Edition").Installed = True
End Sub
This added the HSTbar.xla to my VBA-projects. I also got the tool bar activated by this.
In the extras / addins I see that the SmartView Addin is activated. Nevertheless all SmartView Buttons do not react when I click on them and I am missing the SmartView menu bar.
Has anybody an idea or hint, what needs to be done in addition?
Best regards,
HelgeSmart View is a com add-in so you cannot unload it this way you would need to use code to change the 'connect' state of the com add-in:
Function LoadSV(enable As Boolean)
Dim oAin As AddIn
Dim comAin As COMAddIn
For Each oAin In Application.AddIns
Debug.Print oAin.Name
If oAin.Name = "HsTbar.xla" Then
Debug.Print oAin.Installed
oAin.Installed = enable
End If
Next
For Each comAin In Application.COMAddIns
Debug.Print comAin.Description
If comAin.Description = "Oracle Hyperion Smart View for Office, Fusion Edition" Then
Debug.Print comAin.Connect
comAin.Connect = enable
End If
Next
End Function
This will vary based on your smart view version and OS. In fact in windows 7 you would need to be running Excel as an admin and this in unlikely. Is there some reason you are needing to unload SV in VBA? -
My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602 -
How can I remove this new Kitkat upgrade and go back to what I had. I cannot deal with the color on text screen and the keyboard is terrible. Can take back all the stupid pictures they added for texting. Just need it back to what it was.
Hasn't any business ever heard of the term.
IF IT AINT BROKE DON'T FIX IT. -
I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie
The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade. -
What is difference between Startup upgrade and startup migration.
what is difference between Startup upgrade and startup migration.
I am having the metalink note.
STARTUP MIGRATE was introduced in 9.2 as a mechanism to be sure that most everything that needs to be done to run an upgrade script or a patch script is done automatically. In the past, customers were expected to adjust certain initialization parameters prior to beginning an upgrade or applying a a patch,
but most of this is now done automatically by STARTUP MIGRATE.
When a customer starts a database in MIGRATE mode, the following ALTER SYSTEM
commands will be set automatically:
But i am not sure what exactly the meaning by startup upgrade.
and exactly the startup upgrade and startup migrate -
Could you remind me how to synch music back from my ipod to my computer - my ipod has my whole collection but my laptop has been upgraded and i lost my library
Follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I recently purchased a song from itunes and when the song downloaded, it deleted/removed my entire song library. Only leaving the one song.
My photos and aps are still there, but no songs. Anyone ever encounter this and how do you fix it? I don't want to loose my songs as some are not in MY itunes library. HelpIf the songs are still on your ipod, make sure autosync is disabled in iTunes on your computer, connect and right click on it in the device list, then choose "transfer purchases" to copy all bought media and apps from your ipod to your computer.
If the songs are not on your computer and got deleted from your ipod as well, you can't get them back, unless you have a backup of your iTunes library as part of your computer backup. -
Someone please help me I have an iPhone 3GS version 4.2.1 8c148a and I downloaded slotmania this morning and it won't let me play it keeps asking if I want to upgrade and I can't upgrade because phone won't let me so I'm wanting to play my game I use to could play it and farmville but for some reason it won't let me play .... Can someone help me figure out something because I'm sure their is a way I can and husband won't upgrade me and I got free upgrade and can't even get because he's cheap it's sad Hugh
What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps. -
Help with simple OS upgrade and backup questions for a dumb old previous PC user...?
Ok...have mercy on me, please...
I am not completely dumb, I know typical board etiquette, and I have searched for various answers (and found many)...but I just want to confirm my personal "research" and get all of this clear up before I proceed with this insanity. I know I could probably search more, but this is taking hours, because of all my various questions, one leads to 10 more...
I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right? Told you I was dumb...)
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 2 GB 800 MHz DDR2 SDRAM
My main goal: install an app that was in the Mac App store.
However, with Leopard, I can't access the Mac App store with Leopard, apparently.
I click on the Mac App store, and up pops up a Lion advertisement...telling me I should upgrade. Ok, fine...probably a good idea, anyway...
But how do you upgrade to Lion? Apparently through the Mac App store!
The web-redirects on the Apple site are amusing...taking me on an endless cycle...purchase Lion in the app store...click..."you need to upgrade to Lion"...OK...click..."you need Lion at the app store"...OK...click..."you need to upgrade to Lion to get to the app store"....etc.
OK...fine...google searches...ahh, I need to upgrade to Snow Leopard first, apparently! Yes?
(Maybe the Apple redirects should detect that I have Leopard, and direct me to a screen that explains that I must upgrade to Snow Leopard...and then Lion! Do you hear that, Apple? Thanks.)
Anyway...so here's my plan:
1) Upgrade to Snow Leopard
2) Access the Mac app store
3) Upgrade to Lion
Question A: With my iMac (specs above), is it really advisable for me to do this? Can my computer really handle Lion? It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes? Is this a dumb idea, even if "OK"? I know that "minimum requirements" on a PC often meant: "Well, it will work...but it will be slower than a snail and crash if you run 5 programs at the same time" (which I usually do...) I don't want to upgrade if the "minimum" is really not enough.
Question B: If the answer to A is "not a good idea", then do I just need a new computer (i.e. better processor)? Or do I need more Ram? And can I add Ram to this computer, and is it relatively easy? I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install. Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities. Will it be harder for a Mac?
= = =
Next:
When upgrading an OS on a Windows, you pretty much format the harddrive and start all over. Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare. You could NOT just back-up software. You typically had to re-purchase and install it all from scratch. Is this the same with Macs? Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare! I hate PCs.
Anyway...so, my iMac has Time Machine. I am pretty ignorant about this, and based on my previous PC backup program nightmares, I have a distrust for it...and don't really understand how it works. But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet. So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C...
Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files. My wife and I both access the computer, so two user accounts. Does Time Machine really do a good job backing up everything and all things? Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine? Anything for me to "watch out for"...or to do when I buy a new external hard-drive and setup up Time Machine for the first time on it, in order to make this work well? Will I have to re-install all the various applications I have installed on this thing? (like with PCs?)
Thanks for any sincere help.yachadhoo wrote:
I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right? Told you I was dumb...)
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 2 GB 800 MHz DDR2 SDRAM
Apple has discontinued support for 10.5, it's a plaque of our platform that Apple only supports the last two operating systems in circulation.
Where as on Windows you can run the same OS version for 10 years and get updates free (if not stolen), on a Mac we get one year, two tops now and if you don't upgrade and break all your third party software and hardware drivers in the process, then your denied security updates.
On top of that, the OS X upgrades tend to break your older hardware too, or slow it down so much that it drives you to want to buy newer hardware.
It's funny Apple places the AppStore on your OS X version along with iTunes and Safari updates, but then doens't supply necessary security updates, your machine may be compromised and here you enter vital credit card info, banking etc. thinking you have a secure machine.
My advice, since that's a 10.5 era Mac, is to upgrade to 10.6.3 via this disk, then use Software Update until clear. You'll get security updates and your present installed 10.5 software will work in 10.6 using Rosetta.
http://store.apple.com/us/product/MC573Z/A
Rosetta is not avaialble in 10.7 so it could be a lot of your software will no longer function
http://roaringapps.com/apps:table
I don't see the sense in you buying all new software for a machine that's at it's end of life stage.
You can buy software in the AppStore with 10.6.
Question A: With my iMac (specs above), is it really advisable for me to do this? Can my computer really handle Lion? It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes?
You will need to buy 4GB of RAM to run Lion well, the 2GB is just a bare minimum, and your processor is a bit dated.
Lion 10.7 is certainly slower than Snow Leopard 10.6, in fact so many wanted to go back to Snow Leopard and one of the resons was Lion was slow.
So I wrote a User Tip, here, but the Tips were implemented only recently.
How to revert your Mac to Snow Leopard
Question B: If the answer to A is "not a good idea", then do I just need a new computer (i.e. better processor)? Or do I need more Ram? And can I add Ram to this computer, and is it relatively easy? I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install. Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities. Will it be harder for a Mac?
RAM is easy, you can buy it at Otherworld Computing or Crucial.com and install it yourself, there is a little door under the monitor.
Videos online at YouTube.
When upgrading an OS on a Windows, you pretty much format the harddrive and start all over. Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare. You could NOT just back-up software. You typically had to re-purchase and install it all from scratch. Is this the same with Macs? Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare! I hate PCs.
Mac'soperaing system is seperate, it can be replaced or upgraded indepentantly of programs or user accounts on the machine.
There are some programs that install a kernel extension file at boot into OS X, those get knocked out, but those can be replaced with a new install of the software.
You should always backup your users files as those can't be repalced.
Most commonly used backup methods explained
Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files.
OS X upgrades dont' affect User accounts but they can have a affect on programs installed, which most of your 10.5 programs likely will no longer work in 10.7
However they will (with a slight update) work in 10.6 just like before.
You need to backup regardless, I suggest a manual backup of users files to a storage drive, a 10.5 clone on another drive, the your ready to upgrade to 10.6
10.5 to 10.6 upgrade is rather painless, also 10.6 gives accelerated video drivers, so your machine will appear faster.
However once you install 10.7, you will slow down.
Does Time Machine really do a good job backing up everything and all things?
No, you shouldn't rely upon TM, have a multiple backup stragedy, TM files are hard to access directly.
Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine?
No need to restore, OS X upgrades and leaves everything else in place, just some programs (with 10.6) or a lot (with 10.7) when you try to launch them they will fail.
Also when you connect TM it will do a substancial change to reflect the new boot drive.
If you were using TM as a "storage drive" thinking you can use the archived versions later, that wil change upon the new OS X upgrade.
But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet. So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C..
You need not only TM drive, but a bootable clone and user files on a storage drive.
Most commonly used backup methods explained
Will I have to re-install all the various applications I have installed on this thing? (like with PCs?)
No, depending upon what OS X version you stop at depends how many programs no longer work.
You will have to buy a lot of new or upgrade versions with 10.7, not so with 10.6 only updates mostly because of Rosetta on 10.6 and not on 10.7
My opinion, since that machine is a bit dated, is to upgrade to 10.6, Software update to 10.6.8, and stay there.
Later on 10.8 is being released after this summer, you may want to consider getting a new machine with 10.8 a few months later to ensure all the bugs are worked out of it.
Your not a comptuer savvy person, you like most Apple users expect your machine to "just work" I think going to 10.7 will be a bad experience for you.
10.6.8 will server your needs until 10.8 is released and on new hardware where Apple will hold your hand for free for three months, 3 years with AppleCare.
Your not a "OS X upgrader type of a person" and Apple needs to get of thier collective assets and pay better attention to it's most common users.
Maybe you are looking for
-
The ipod cannot be updated. The disk could not be read from.
The ipod cannot be updated. The disk could not be read from or written to. This message appears every time I try and update my ipod or put photos on. I also get this message: An error occured while updating the default player for audio file types. Yo
-
MS Outlook on O365 versus FingerPrint software or Value Added Package
Hello all, I have problem - after installing FingerPrint software or Value Added Package some functionality in MS Outlook 2010 on MS O365 system stops working like planning share meetings. I mean so problem in the Security - this application close s
-
Capturing plots using GPIB-Equipped PC
I would like to write a visual basic program to make the PC pretend to be a GPIB printer. Using Visual Basic, I can send commands to the spectrum analyser and get back simple pieces of information such as the marker frequency. But I have not been suc
-
Does anyone know how to reduce KERNEL_TASK? PLEASE HELP!!!
i am currently using MBR early 2011 15ing 2GHZ
-
LSMW unable to process completly in Background
Hi I have an very unsual has any body come across this for functional location task list(PM) i have created an LSMW to upload but for the 24 thoushand odd records for the first 11 thoushand records it is uploading perfectly but for the remaining it