SmartView auto refresh OBIEE report

I cannot find way to automate process between SmartView and OBIEE.
1.Smartview connect OBIEE
2. after connected, auto refresh report.
Please help.

Hi,
About this:
>
Suppose from emp table i am querying a report as
select emp_num,emp_name from emp;
i want to insert this emp_name and emp_num to the new table.
>
What exactly you want to do?
1) After every refresh (i.e. after 5 minutes) you want to create a new table an insert the values of emp_name and emp_num.
2) You want to store the values of emp_name and emp_num after every refresh in a new table(that is already created).
Didn't get your purpose behind this?
Regards,
Kiran

Similar Messages

Need to refresh my report OBIEE for each ten min intervel

Hello All,
I have following requirement,
Requirement 1 :-
I need to refresh my OBIEE report for each 10 min.
Could you please any one suggest me how to configure the report to refresh automatically for each 10 min
Requirement 2:-
I had changed the column name in the presentation layer, on the basis of the column i had build few report
How i can update that column name in all the reports. I need to update manually or automatically is it get update?
Regards,
Krishna reddy

Thanks Srini for your reply.
on goggling i also found following workaround on report refresh
http://biztricz.blogspot.in/2010/11/refresh-only-particular-reports-in.html
Request 2:
I did work around that ,
if you change the column name in the presentation layer it will automatically reflect in all the report which all using that column
Regards,
Krishna

LUMIRA Server Auto refresh reports

Hi,
In Lumira Server 1.17. Is it possible to auto-refresh reports without refreshing the web page? Only when I refresh the page, then the data gets updated.
Thanks.

Hi Cherry,
I believe the only option to schedule a refresh of a Lumira data set is when it is based on a .UNX universe. The BI 4.1 platform will enable this functionality from within the CMC. Here you can schedule a refresh and the data will be updated on the HANA platform.
Please let me know if you have any additional questions!
With kind regards,
Martijn van Foeken | Intenzz

Automatically refresh the OBIEE report

How to refresh a OBIEE report automatically, when the data in the database changes?

Thanks for the reply.
I have to refresh the report only when the data in the database changes. If I use a variable then I would have to set the variable to some fixed number of seconds and the report would be refreshed every 'n' seconds. That is not what is expected.

OBIEE Cache clear and refresh of reports from DAC

Hi All,
I have an existing process where OBIEE cache clear and Dashboard report refresh is happened from DAC.
But the issue is both do not happen parallely, the both tasks are kept in single text file and they are called from a batch file from DAC. Below is the code
nqcmd -d AnalyticsWeb -u Administrator -p SADMIN -s D:\OracleBI\server\Bin\PurgeAllCache.txt
So I want to make them run parellely so that Cache clear and refresh of reports happen parellely. In order to achieve do I need to create seperate batch files or can I manage by changing the above code.
Please Suggest.

Can you share the code in the file PurgeAllCache.txt
There might be some issue with code, make sure you use ';' for each statement.
or else use 2 files and 2 commands to execute them.
Pls mark if helps

Auto-refreshing Report

All,
I'm using HTMLDB 2.0 (upgrade from 1.6) and I'm trying to build a report auto-refreshing at fixed time intervals (i.e. 15 sec.) or based on table updates. Can you help me ?
Message was edited by:
rnegro

http://htmldb.oracle.com/pls/otn/f?p=11933:40:6577557243619141460::NO:RP::

How to make OBIEE reports available during the DB tables data refresh?

Experts,
We have our production ETL run for 2.5 days every month. OBIEE reports will not be available during the run. We have a requirement to make the reports available all 24 hrs 365 days. So, what we are trying is to copy all the fact/Dim tables to the new schema running in the same or different DB server and amend the connection pool to point this schema during the run. Here are my questions. Is this a workabale solution (or) is there better approach for meeting our requirement
Regards,
Sarvan

I would suggest this option:
Store the following connection pool values in a table and call them in your connection pool using Connection Pool Scripts
Data Source Name
User ID
Pwd
when ever you want to change db just you need to edit these values that would help your bi with no downtime.
You might have to tweak it little bit if needed.
More or less we have use sometime back to a client where they want to switch dbs dev to test to etc
Try it out.
BTW: 2.5 days load time for Full load or Incr?
Edited by: Srini VEERAVALLI on Feb 1, 2013 8:40 AM

Auto Refresh OBI Page for Current Day Only

Hello Guru's
I have a obiee page which needs to get refreshed every 30 seconds . I could able to do that using <META HTTP-EQUIV = "REFRESH" CONTENT = "30"> . But the triggy part is , auto refresh needs to be applied only for current day and not for any date range selected by user .
Details :
Prompts are defaulted to current date and time on the page, but user can also select date ranges as well . So the setting for auto refresh needs to apply only on current date (default prompt values) and not if the the user select data range .
let me know if any of you guys have come across such .

Check the below link and tweak it if needed.
http://www.cool-bi.com/Customize/AutoRefresh.php
Appreciate if you mark as correct :)
Let me know for issues
Edited by: Srini VEERAVALLI on Jan 4, 2013 10:46 AM

Broadcasting of workbooks, auto-refresh and other questions

Hello Reporting gurus.
Our users run BEX Analyser queries but this is evolving towards more automation and fancy things. A lot of threads exist on the subject but I have not been able to find clear answers. We are on BI 7.
1) How do we use the broadcaster to refresh workbooks and output the results to a network share drive.
2) Queries being part of the workbooks work with user input variables. Do I have to change all queries (or create new ones identical) with user exits variables to fill in the fields for auto-refreshing w(ith let say the current year and current fiscal period etc...) ?
3) Is it possible to create a parameter input screen to pass on variables values to the broadcaster before the auto-refresh takes place so that I don't have to create user exit variables ?
4) How can we view workbooks with the BEX WEB Analyser ? Or do we have to create an application with WAD ?
Thanks

Hi Yves,
in Analyzer you have an menu entry publish with BI broadcaster, then a broadcaster will appear. there you can create a setting. inside that setting you can use a variant and with SPS 13 also variable sets. There you can define the users who should receive the updated workbook by mail. It is not possible to save to file system, but you can save in Portal.Web Analyzer is only to use with WAD and is not able to process Workbooks.
best regards,
kai

Using Excel 2007 to display and auto-refresh planning.

Hi all,
a customer wants to display a simple planning screen on a 24" monitor.
We're using an old domain pc, with domain user (planning) logged on to display the planning file.
We've configured the worksheet so that multiple users can edit it.
I've also found the settings which auto-update the file. I was amazed that this is standard functionality.
Although, it doesn't work as we expected. It goes well, but when too much users work in the file, some users still get the error message: 'can't open file because it's already in use'.
This does NOT happen when the file is not constantly opened by the 'planning user'.
So that's one issue, probably caused by the 'planning user', having the file opened 24/7.
Another issue is that the file stops auto-refreshing after a while. I didn't find any pattern in that.
So basically, what the customer needs is:
Display Excel worksheet
Auto-refresh
I've found some nice articles about SharePoint and Excel services, but unfortunately they're running SharePoint 2010 Foundation, which does not include Excel services...
Is there any other way or tool to achieve this, without using the Excel-built-in options?
Or maybe there's a fix for that problem?
Thanks in advance.

Hi LunAds,
I'm afraid you have just discovered how bad these features are implemented in Excel: they just don't work properly and I always advise against using them for any serious long-term solution.
If you do not have Excel services, then editing the document on the server (which would prevent lots of problems) is out of the question indeed.
Alternatives depend a lot on your needs.
For example, you could use sharepoint lists that the users can edit and then import those lists into Excel for reporting purposes.
But if this is relational data (parent-child tables, which is very often the case) then a database solution is probably the best route to take.
Regards, Jan Karel Pieterse|Excel MVP|http://www.jkp-ads.com

How to fix a website that auto refreshes to not open up in a new tab.

I use a scheduling website for work that auto refreshes. Sometimes when the page auto refreshes it opens up the current page I am on in a new tab instead of just refreshing in that tab like it usually does.
I have reset safari multiple times and it doesn't help. Any idea what I need to do?

Type '''about:config''' in Address bar and search '''browser.newtab.url''' change the value to "about:newtab"
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!
When you enter a search term in the Firefox location bar and press Enter, Firefox will per default do a "I'm feeling lucky" Google search and redirect you to the first result that matches your search term. This behaviour can be changed by a number of add-ons. If you'd like to restore the previous default behaviour, please follow these steps:
#Enter about:config in the Firefox location bar and press Enter.
#You should see a warning that making changes to the Firefox configuration can be potentially harmful to Firefox's integrity. Click the ''I'll be careful, I promise'' button to continue.
#In the Search box at the top, enter ''keyword'' as the search term. You should see a few remaining items, one of these is ''keyword.URL''. It should be bold.
#Right-click on the keyword.URL setting and select ''Reset'' from the dropdown menu.
Now you're done. Please report back if this fixes your problem. Thanks in advance!
You can find more information about the Location bar search feature in the [[Location bar search]] article.

Konqueror file management and auto-refresh

Hello all,
I am working with Arch and KDEmod and so far everything is pretty good. I do have one problem that is a bit annoying.
Konqueror file manager windows do not automatically refresh when viewing the URLs system:/home or system:/users/jay. The system:/home URL is what is opened when you click on the "Home" icon, so this makes this problem stand out.
Anyway, the problem can be reduced by doing the following:
1. Open Konqueror file browser and select "Home Folder" from the tree on left. This puts you at the URL system:/home. (Alternately, just click on the "Home" icon that gets set up in the kicker by KDEmod.)
2. In a terminal window create a file in your home directory. Note that the file does not show up in the Konqueror window.
3. Press F5 to refresh Konqueror. The newly created file now appears.
4. In a terminal window delete the file you just created. Again, note that the file does not disappear from the Konqueror window.
5. Press F5 to refresh Konqueror. The file now disappears.
The correct behavior is that when you create and delete the file, it shows and then disappears from the Konqueror window accordingly. Currently this does not work for the system:/home (Home Folder) or system:/users/jay (Users Folders/<user full name>) URLs. Interestingly enough, if I type the URL "/home/jay" into the Konqueror location bar in file management mode and then do the above steps, the auto-refresh works fine.
Does anyone have any clues as to why the refresh doesn't work for the system:/ URLs? Is this by design? What plugin actually provides the system:/ URL schema?
Thanks for any suggestions,
Jay

Hi LunAds,
I'm afraid you have just discovered how bad these features are implemented in Excel: they just don't work properly and I always advise against using them for any serious long-term solution.
If you do not have Excel services, then editing the document on the server (which would prevent lots of problems) is out of the question indeed.
Alternatives depend a lot on your needs.
For example, you could use sharepoint lists that the users can edit and then import those lists into Excel for reporting purposes.
But if this is relational data (parent-child tables, which is very often the case) then a database solution is probably the best route to take.
Regards, Jan Karel Pieterse|Excel MVP|http://www.jkp-ads.com

Auto Refresh a cfform

I have a page with flash cfforms and I was wondering if there
was any command to auto-refresh the screen say every 30 seconds or
so? Is the "timeout" cmd somehow related? Sorry, I am a cf noob.
Thanks,
Nick Butler

The reason I want to refresh a page with a form is because
sometimes there are multiple users viewing two linked pages. There
will be a report sending page, and a report recieving/viewing page.
The person who recieves the reports likes to leave her browser
window open, and as it currently stands, if someone submits a
report while she has her window open, she will not see the new
report unless she manually refreshes the page.
Ok, I got the meta refresh tag to work, but it reloads the
entire page. Is there any way to make it only refresh a specific
flash form?

OBIEE report with HFM and Essbase Data source

Hi All,
Just want your though can we get the data from HFM and Essbase data source in a single report i.e. for some account i want to show budget data from HFM and Forecast data from essbase in a single OBIEE report? If yes how can we model both Data source in rpd?

It possible but the challenge is to try to align the account hierarchy and the entity hierarchy between Essbase and HFM. HFM is looking the data at a top side consolidation level where planning will have more granular details to forecast correctly. The best solution is either to build a custom table in to import both sources, or to use HFM data into Essbase, or to use EPMA. The best in class solution stays to align hierarchies and metadata across applications. We implemented BI Financials Dashboard for the General Ledger, built a custom Dashboard connected in Real Time to Planning and are installing OFMA to connect HFM. Once done, you can rationalize metadata if not done before and start to link the different data into single reports. You will also have to ensure the data is refreshed at the same time to avoid inconsistency.

Refresh a report at fixed interval

Hi
My requiremnet is to update the report at a fixed interval like chart.
How to update the report at a fixed interval.
Plz help me
thanks
PK

Hi,
This might help
http://apex-at-work.blogspot.com/2009/08/automatic-refresh-of-interactive.html
http://jeffkemponoracle.blogspot.com/2006/10/apex-tip-page-auto-refresh.html
Br,Jari

SmartView auto refresh OBIEE report

Similar Messages

Maybe you are looking for