SmartView Connection to Shared Services Error

I have installed 11.1.2 on Windows 2008 (64bit) in stand-alone mode. I also have Excel 2007 installed on the same machine. I took all of the default ports when setting up the server instance. I installed SmartView(32bit) on the same machine with no errors. When I try to connect to "Shared Connctions" through the SmartView home window, I keep receiveing an error message: "Connection to Shared Services failed Error Message: 'Cannot connect to provider. The server name could not be resolved.' I have tried replacing the server name with it's physical IP address,; I have tried all of the typical ports; but cannot seem to resolve the problem. My URL reads as follows: "http://testsys:13080/workspace/SmartViewProviders' I have a 11.1.1.3 instance on another server works fine, but the URL is a bit different (http://server:13080/aps/SmartView). Any help would be appreciated.

Did you assign your Hyperion Provider Services URL?
I am guessing that 11.1.2 hasn't changed that much from 11.1.1.3.
In 11.1.1.3, it's under Options and is in the lower right hand side of the Options form.
When you have that set, and then click the Connect button in the Data Source Manager, and then Connect to Provider Services, what happens?
You should see: Oracle BI Server, Oracle Essbase, and Oracle Planning. Do you get that far?
Regards,
Cameron Lackpour

Similar Messages

  • SmartView 11.1.2 Can't Connect to Shared Services

    I have posted this thread on the essbase forum, also...
    I have installed 11.1.2 on Windows 2008 (64bit) in stand-alone mode. I also have Excel 2007 installed on the same machine. I took all of the default ports when setting up the server instance. I installed SmartView(32bit) on the same machine with no errors. When I try to connect to "Shared Connctions" through the SmartView home window, I keep receiveing an error message: "Connection to Shared Services failed Error Message: 'Cannot connect to provider. The server name could not be resolved.' I have tried replacing the server name with it's physical IP address,; I have tried all of the typical ports; but cannot seem to resolve the problem. My URL reads as follows: "http://testsys:13080/workspace/SmartViewProviders' I have a 11.1.1.3 instance on another server works fine, but the URL is a bit different (http://server:13080/aps/SmartView). I have tested and confirmed that all of the shared services are up and running and can be accessed from either EAS console or a web browser. Any help would be appreciated.

    Have you installed and APS (Analytic Provider Server) on your system..??
    As I know, to connecting to Essbase using Smartview, we need to install the APS on our system.
    Regards,
    VieN

  • SmartView cant connect to Shared Services

    Hello!
    When i open SmartView, type the Shared Services URL and press the "Update Button", i get this error:
    "Error getting information from the Hyperion Shared Services Server"
    Does anybody know what can it be? I searched in Shared Services logs and didnt find anything.
    I have Essbase and Shared Services (usiing MSAD), version 9.3.1. Windows XP 32 bits.
    The URL i type is the default "http://<serverIP>:58080", as i installed in default port.
    Everything else about Shared Services seems to be working fine.
    As far as i understand, i dont need to install Provider Services to access like that, do i?
    Thanks!

    Hyperion17 wrote:
    Hi,
    Is you question answered ? I know its long time this question is open but i wanted to post answer so that others can refer to it.
    http://servername:28080/interop/
    Thanks.
    Edited by: Hyperion17 on Apr 26, 2011 11:37 AMThe OP said 9.3.1 and the default port was 58080 in that version.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Connection to shared services provider failed

    I am using:
    Hyperion Planning 11.1.2.2
    smart view 11.1.2.2.310
    Microsoft Office 2010
    Windows 8
    When trying to connect from Excel with SmartView, i have the error, "Connection to shared services provider failed. The provider running at... is not a valid Shared Server provider."
    I had test to connect in other PC and it works fine. Besides, i tried to connect to 2 servers (Development ande Production) and the same error is shown.
    I had uninstall and install SmartView and nothing changed. I tried Smart View11125000 and the same error is shown.
    Somebody know about this issue? or can help me??
    Regards!!
    Natalia

    What happens if you use a browser and type the shared connection url in it?
    Did you try connecting using a private connection?
    Regards
    Celvin
    http://www.orahyplabs.com

  • Shared Services error

    We "implemented" https this morning on our 2 HFM web servers. When trying to set up security for one of the HFM applications (under Projects in Shared Services), I get this message. I just have an idea that it has to do with the https implementation on the HFM web servers :
    Processing Error:
    Description: Invalid argument.
    Code: -2147220951
    Trace: Number:-2147220951
    Description:
    Source:General Security Error
    Page:
    Actor: General Security Error
    The Shared Services server is not https.
    Thanks.

    HI
    First Implement SSL in shared services and go to HFM
    As per HYPEION SSL PDF Follow the steps and imp the same.
    But i have imp ssl in shared services and then goto hfm but is show error message at the time of registerd with shared services using config utility.
    (Feb 25, 2009, 05:21:33 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
    com.hyperion.interop.lib.OperationFailedException: Unable to connect to Shared Services, make sure the Shared Services server is running and try again.
         at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
         at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
         at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:162)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:344)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:165)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Feb 25, 2009, 05:21:33 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.Exception: Unable to connect to Shared Services, make sure the Shared Services server is running and try again.
         at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:173)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:344)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:165)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    kindly let me know the solution.
    thanks in adv
    mailid :[email protected]

  • Hyperion Shared services Error (9.3.1)

    I have registered the essbase analytic services with shared services. when i select the Analytic serviecs application through the shared services windows i am getting the hyperion shared services error "Unable to connect the application.Please contact the serevr administrator" and also i am geting Network Error (dns_unresolved_hostname)
    Your requested host "server name" could not be resolved by DNS.
    Please help.

    I have resolved this issue by Myself.

  • EIS connection  with Shared services failed.

    HI All,
    I m using EIS for data load ,and getting error while test connection with Shared service. while its connectiong with essbase with default user "admin"
    Error :
    java runtime environmant may not be set appropriately on the server machine...0[main] INFO httpclient.HttpMethodDirector - Failure authentication with BASIC 'weblogic server@Servername:58080 EIEINIT failed. Eleinit:java.lang.Exception: Login to EIE on Server thru CSS Token failed.'
    Please suggest.
    Thank you.

    As per my knowledge , shared services support from EIS has been removed from 9.3 on.

  • Hyperion shared services error 1051522 - Analytical Services failed to get

    Hi All,
    When I am trying to resync my securioty from HSS 11.1.1.1 to my essbase 9.3.1 I am getting this folowing error.
    hyperion shared services error 1051522 - Analytical Services failed to get group's member tree with Error MSAD porvider could not be contacted
    I have already checked for any corrupt application on essbase but alll the esssbase apps are fine.
    Any help would be appreciated.
    Thanks

    I have resolved this issue by Myself.

  • HP Photosmart 7520 unable to connect to web services error

    I've used my HP Photosmart 7520 for years without issue scanning to email.  Now I get "Unable to connect to Web Services" error message.  I've done all the procedures listed in the blog, including changing the manual DNS server configuration and still get the same error.  Help!

    Hi @ajbond77,
    Welcome to the HP Support Forums.  I understand that you are getting a connection error message when attempting to use the scan to email feature of your Photosmart 7520 printer.
    If you have already set a manual IP address and manual DNS servers, then please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Connecting to Shared Services via java API

    Hello All -
    I am new to using Shared Services and I would like to know how to connect to Shared Services using a java API. We are using release 11.1.1.2 and I have found and read the documentation on how to maintain users and groups. The examples in the documentation demonstrates how to the task but assumes you have already connected to shared services or you know how to connect. Any help will be appreciated.
    Keep in mind this is not an Essbase connectivity question but shared services.
    Thanks

    Sorry double post

  • Cannot Connect to Shared Services DB after 11.1 installation

    I uninstalled 9.3.1 and then installed 11.1
    When I start the configuration process, the foundation services asks to connect to the Shared Services Database. I don't get the option of selecting Perform 1st Time Configuration (it is greyed out), the only choice is connect to previously configured shared services database. When I put in the name of the other shared services database, from the 9.3.1 installation, I get the following error:
    Shared Services database content not found in the specified database
    I am go to the uninstaller, but there is not an option to uninstall just shared services.
    Any ideas would be appreciated

    John,
    I renamed the file in the C:\Program Files\Common Files\InstallShield\Universal\common\Gen1\_vpddb directory. When I ran the configuration again, I still do not get the option to configure a new db, and I still get the error from the original post.
    I have attached the vpd.properties file the was just created
    #HSQL database
    #Tue Feb 03 12:51:13 EST 2009
    sql.strict_fk=true
    readonly=false
    sql.strong_fk=true
    hsqldb.version=1.7.1
    version=1.7.1
    hsqldb.cache_scale=14
    sql.compare_in_locale=false
    sql.month=true
    hsqldb.log_size=200
    modified=no
    hsqldb.cache_version=1.7.0
    hsqldb.original_version=1.7.1
    hsqldb.compatible_version=1.7.0
    sql.enforce_size=false
    Russ

  • Hyperion S9 Shared Services Error

    Hi All,
    I have been faced with some problem pertaining to Shared Services 9.3.1
    The OpenLDAP services work perfectly fine, but the Shared Services throws an error " Some services stop automaticaly when there is no work to be done "
    I have done the following till date:
    1) Reconfigure Shared Services
    2) Re-install Shared Services
    3) Create a new user and configure
    4) Restart system
    5) Recover Shared Services
    However despite having tried the above measures, it has failed to respond, and continues to throw the same error.
    Kindly help me resolve the same.
    Regards,
    Apo

    Hi,
    I accept with Sandeep,
    but if u r trying to install for practice .. you can install in Windows XP Prof sp3.
    I installed on my machine and its working....
    I had the same problem in my server Windows 2003 SP4.
    I renamed the folder C:\Hyperion to C:\Hyperion_old and tried to reinstall the Hyperion SS and ES, AAS once again... now its working... in your installation there may be some problems with the register entires....
    1 whole week I fedup with this installation and I thought to rename the current Hyperion home and redo the process with new home....
    I accept completely with Sandeep... but if u r installing in your local machine try once again... if u r getting the same problem them change the OS....

  • Shared Service Error 11.1.2

    Hello All,
    I created a native group in shared services & provisioned administrator role for each application to the group. I assigned few users to that group. When i log in to the planning I get an error Failed to sync User Provisioning. I checked the
    users on Essbase side & all of them show Essbase & Planning access.
    I m using planning 11.1.2. Please let me know if there is anything more that i need for the synchronization of users?
    Thanks!

    Hey LdeM,
    Thanks for your reply, Oracle support just got us a workaround yesterday as well. But they haven't specify what's the cause of this. they were just comparing the .jar
    Resolution:
    1.     Deleted the css.jar from Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0
    2.     Deleted the tmp directory under Oracle\Middleware\user_projects\domains\epmsystem\servers\FoundationServices0
    Thanks

  • How to connect Essbase/Shared Services 11.1.1.1.3 to LDAP

    Hi,
    I just installed Essbase 11.1.1.1.3 with Shared Services. I have never connected it to a corporate LDAP environment before. I remember in the past version 6/7 etc.. there was a CSS file that needed edited. Is that still the case or do I have to go into Shared Services and configure etc...
    Thanks

    Hi,
    You configure it all through shared services, have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security/ch05s05.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Shared Services Error: Failed to load Tree

    Hi All,
    I am trying to open up an application in Shared services under the projects folder:
    path : Projects -> Analytic Servers:<Server Name> -> <Application>
    When I do this the page just keeps loading for a very long time and then gives me an error which says "Failed to load Tree"
    Can anyone help me out on what the problem is here?
    The exact error message is : "There was a communication error while loading tree data"
    Regards,
    Anindyo
    Edited by: user644118 on Oct 31, 2008 4:27 PM

    Anindyo,
    Which operating system are you working on, I remember some one faced same problem when it was solaris, am not very sure though.I guess , it has something to do with 'Hyperion Remote Authentication Module'.
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

Maybe you are looking for

  • How do I manage multiple Apple IDs on one iMac

    We just purchased my oldest child her first personal iPod Touch 5th gen.  Up until now, we have all managed our music/devices (2 nanos, 2 iPhones, iMac, iPad, and now Touch) on our iMac under one Apple ID (mine!).  We use this ID for everything from

  • Issues to Production Orders created from Sales Order

    We have multiline Sales Orders that create a Production order for each sales order line (can be up to 70 or 80 per SO). We normally backflush these via multiple MB1A transactions after the SO has been completed. It is a lot of work doing the required

  • TV went black..

    It is less than 2 years old, and today the screen went black.  I still have audio.  Is it dead? It's a model 26av502u.  26 inch LCD. Solved! Go to Solution.

  • Audio distortion only after update to 1.2.1 - old firmware = no distortion

    I have been using my 5G ipod for over a year. The sound quality was brilliant, movies great, mp3 192kbps, in ear or bose lifestyle digital/wave radio output via dock and line-out from ipod. Updated to 1.2.1 from 1.1 and suffered terrible audio playba

  • Copying Stacks

    I need some help with this question: Write a recursive function copy(S,Scopy) that makes a copy of the given stack S. copy must leave S unchanged - to verify this, write a function called copy_test that reads in S, calls copy, and then prints out S a