Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)

I am having an issue retrieving on a SmartView grid running 11.1.2.2.309.01 and SmartView 11.1.2.2.102.I have a grid with three attribute dimension and, at first it was long running and gave me a netretry netinterval error. I shared with my administrator and, they gave me the registry updates to increase my timeout for my default browser. Now, I try to retrieve the same sheet and after approximately five minutes, I get the message, "Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)". I am not sure what this means. I can retrieve on other grids with one attribute dimension or a regular retrieve but, for some reason, I notice when I retrieve on multiple attribute dimensions, I am having this issue. I had this tested with others and, they are experiencing the same result. Any thoughts. Thanks in advance

The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.

Similar Messages

Cannot connect to the provider. make sure it is running in the specified host/port Error(2)

Hi Everyone,
When i try to connect to a Essbase/Planning Server, i am getting below error while other users are able connect to Server without any issues.
My connection was fine till yesterday, i checked all updates of excel but no luck..
Could some one help me pls, thanks in advance!

Posted same error in Essbase forums, so i am closing this topic here now.

Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"

Hi,
EPM version: EPM 11.1.2.1
When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
As we found some solution from comunity , we have performed below workaround but still we are getting same error.
·              We have done the changes in mod_wl_ohs.conf file of OHS with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
·              And then restarted OHS and APS service but still we found same error.
Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
     Thanks,
         D.N. Rana

Hi,
We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
Intially we were getting error for "to increase netRetryCould and NetRetryInterval" as a solution we have added below 3 registry DWORD keys under path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"KeepAliveTimeout"=dword:00180000                   (26 Minutes)
"ReceiveTimeout"=dword:00dbba00                      (240 Minutes)
"ServerInfoTimeout"=dword:00180000                  (26 Minutes)
Above error resolved but then we received Error"12031"
Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
and now we are not getting the error "12031".
But here we are not getting how it(LB issue) resolved with above solution?
Thanks,
D.N.Rana

SmartView Error "Cannot Connect to the Provider. Make Sure It Is Running...

Hi All
Our user are getting below error when they try to connect from SmartView
Cannot Connect to the Provider. Make Sure It Is Running in the Specified Host/Port.Error(12031).
We are on 9.3.3 planning.our web server is WebSphere
Please suggest
Thanks,

You might want to increase the timeout and check:
Smartview in Excel utilizes some Microsoft settings that it obtains From IE. When running on IE 7 or higher there are new settings that have a low default time out. You can increase these by following the instructions in the articles listed below
http://support.microsoft.com/kb/813827
http://support.microsoft.com/kb/181050
Make sure you have a safe backup of the windows registry before you do this .
1. Open the Registry (Start -> Run -> Regedit)
2. Locate the following section:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\
3. Create the following new keys for DWORD with Hexadecimal values:
ReceiveTimeout and set it to 00dbba00
KeepAliveTimeout and set it to 00180000
ServerInfoTimeout and set it to 00180000
4.Disconnect and close the Smartview and launch a fresh connection
HTH-
Jasmine.

Error cannot connect to server or DNS name when working with the SRDemo

I receive the error cannot connect to server or Dns name when trying to
display the SRlist.jspx page in the SRDemo. I am using the embedded OC4J server . I tried to using the debugger to trouble shoot the problem but I did not get any information that was useful. The url I am using is http://localhost:8989/SRDemo-UserInterface-context-root/faces/app/SRlist.jspx I also tried using the IP address that didn't work . I really need to get through this demo.

What about using:
http://127.0.0.1:8989/SRDemo-UserInterface-context-root/faces/app/SRlist.jspx
Or disabling any proxy settings your browser might have?

Smartview 9314 cannot connect Hyperion Provider

Hello,
I want to connect via Oracle - Hyperion Smartview 9.3.1.4 to Essbase server. But I cannot connect via Hyperion Provider. Always new release popup appear and It force me release upgrade. Because of company rules I cannot upgrade my release.
How can I connect via Smartview 9.3.1.4?
Hyperion Provider
http://<servername>:13080/aps/smartview ----> http://hyperiontest:13080/aps/smartview
thanks,
okan

The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.

Cannot perform operation. Make sure you are signed into the server.

Hi,
Recently we are getting this peculiar error , not sure why even though all the connections are proper . Any comments or suggestions ??
Thanks !

Hi,
You can restart your excel and disable/enable the Smatview Add-In from Excel Options. Also try to check the Smartview options you have selected. Check whether all the Hyperion Related services are up and running. If everything is ok but still the issue persists then take a restart of the instance and try.
Soumya

Logon balancing error:cannot connect to message server (rc=9)

Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
Vikram

Check OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
    Error: service 'sap...' unknown
    Component NI (network interface), ...
    rc = -3, module ninti.c, line 463
    Detail NiPGetServByName: service 'sap...' not found
    System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
      %SystemRoot%\system32\drivers\etc
is not translated to
   c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger.

Error: [NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM

Hi,
Im unable to open the RPD online getting following error.
Note: Im not done any changes. Its works good till yesterday EOD.
Error:
[NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
[NQSError:37001] could not connect to the oracle BI server instance..
Kindly help me to fix this issue.

Hi,
Could you access the answer side.
Could you see the reports.
Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
Copy nqs config file if you have already have a back up.
Restart the services and try once.
http://mkashu.blogspot.com
Regards,
VG

There is a message stating itunes cannot connect to itunes store.An unknown error has occured (-3212). Make sure network is connected(which it is!) and try again. What can I do. I have been trying for days to purchase music...help! Please:)

See above. My computer is online but not itune. What can i do???
There is amsg stating itunes cannot connect to itunes store. An unknown error has occured (-3212) Please make sure the network is connected, which I've been on-line the whole time I;ve been trying to fix it . . Please help..ive been on this project for days. Thanks

Hello Buck
If you are having issues with the iTunes store, check out the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT2513 I have just upgraded to the icloud and now I am getting an error message on ical - saying "make sure the URL is correct", I haven't changed anything so why is it now an issue? any ideas?

I have just upgraded to the icloud and now I am getting an error message on ical - saying "make sure the URL is correct", I haven't changed anything so why is it now an issue? any ideas?
The full message sasy "The calendar https:// cal.me.com:8443/principas/users/(server number) was not found on the server. Make sure the URL is correct.

10.6.8 cannot access iCloud's facilities - you can set Mail up manually and there is a hack which some people have used to sync calendars (see below) - you cannot sync any other type of data.
This is the situation with iCloud and Snow Leopard:
Your email, calendars, and 'Find my iPhone' will be migrated to iCloud. Contacts and Bookmarks cannot be migrated from a Snow Leopard Mac.
Your iDisk, together with website hosting and Gallery, will continue to work as before until next June.
Syncing of Dashboard Widgets, Dock Items and Keychains between Macs, and Mail Accounts, Mail Rules, System Preferences, Signatures & Smart Mailboxes between Macs & iOS devices, will cease altogether.
You will be able to access email and calendars on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is).

Migration on active directory from 2003 to 2008 and SharePoint error Cannot connect to the configuration database.

Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mk

Hiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)

DPM console not connecting . Error- Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345) DPM console not connecting

I am having problem connecting the DPM console to ther server. It gives me following error -
"Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345)"
The server is DPM R2 and the same console is working on one other computer.
Any idea how to solve the problem?
Thanks

Hi
Please make sure you have both versions of Microsoft Visual C++ 2008 Redistributable installed..
Also make sure you have .netframework 2 installed. If you look at the dpm logs it should say what is missing.

HP 7 Voice Tab - "Camera Error - Cannot Connect to Camera"

Hi, I am facing a Error on my HP 7 Voice Tab. when i try to open camera it showing Camera Error- Cannot Connect to Camera. I bout this in December 2014. I did few trouble shott like go to Setting -Apps- Camera- Force Stop, Claer Data, Clear Chache and then reboot the tab, But Still i have same error. Even i try installed new Camera apps from google Play Store, but Still the erroe remain same. I was thinking to to do Factory Data Reset. (The last option i Have) Please let me know if there is any other solution. Thanks,Raghu

Hey @JaishalCalicut ,
Welcome to the HP Forums!
I understand you're unable to connect to your Slate 7 Voice Tab to transfer data from your PCs.
Does the VoiceTab show up in Device Manager when it is connected?
Have you recently updated to KitKat?
How long is the cable you are connecting the devices with?
Is the device in MTU mode?
Clear all cache on the tablet: Settings > Storage > Cached Data. You should have the option to erase all the cached data here.
Hard reset: While the tablet is on, press and hold the power button for 8+ seconds to force shut down. Turn the tablet back on and see if that helps.
Factory reset: Make sure you backup any important files or information first. Settings > Backup & reset > Factory data reset.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

-3256 Error - Unknown error, cannot connect to remote speaker

I recently bought time capsule and have set that up as a base station. The input to time capsule is the linksys modem + router. I have disabled the linksys router capabilities and am only using that as a modem. When i connect airport express to the time capsule network, i get a error message stating -3256. Unknown error cannot connect to the remote speaker. Before time capsule, linksys network was able to play airtunes, but time capsule is not able to. I have disabled the firewall on both time capsule and linksys.

It might actually be the firewall on your mac rather than the other hardware. I mysteriously started getting this same error when trying to use the Multiple Speakers function with AirTunes (had worked perfectly for over a year). I modified the Security/Firewall settings in System Preferences and it started working again, no error: I simply added iTunes to the "specific services" firewall list to allow incoming connections. Of course the firewall is set up quite differently in 10.4.x.
You'd think that checking "look for remote speakers" in iTunes preferences would take care of this for you, or prompt you to make the changes yourself (I remember getting OS messages that used to say "if you want to do such-and-such, make sure you open port xxxx") but apparently not!
I also read somewhere that checking "share my library" in iTunes prefs can help with this sometimes, but I can't verify that - I already had it checked; it was the OS firewall tweak that worked for me.

Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)

Similar Messages

Maybe you are looking for