Smartwatch 2 Brik after update with Update Service

After a software update from the PC with the software UPDATE SERVICE, the device is turned off and never turned back on.
I have tried several times to re install the software but despite the device is recognized (drivers work) returns "ERROR INSTALLATION".
The device is well charged and pressing the (unique) beyond the 15 seconds nothing happens.
It is totally blocked off ... dead

Have you tried a different Pc and also USB cable just so you can rule out hardware faults not related to your watch - If the same thing continues then I'd advise you to seek further help from an authorised Sony repair centre
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

SmartWatch 2 died after update with Sony Update Service

After problems with Call Handling app after update of my xperia z ultra to Kitkat 4.4.4. I was told by support to repair my firmware using PC Companion. It didn't help. Afterwards I was instructed to update my SW2 firmware with Sony Update Service (SUS).
I downloaded SUS and installed on my PC and followed the instructions. It said that the SW2 already has latest version. I clicked continue and after 40% it failed saying that there was an error with connection click retry or contact support. I tried several times - all attempts failed.
After I tried turning on my SW2 but it was dead. And any other steps didn't help to turn it on.
Nearest Service center is in Moscow, I live in Astana, Kazakhstan. So I am not even sure if they can help us even if I spend my time and money to take it there.
So the bottom line is - never use SUS to update your watches, folks.

ello everybody
The problem is solved by Sony
You will find an update for smartwatch 2
This update will solve our problem
Have fun

Error after update service pack5 in WebLogic 7.0

I have a java aplication and i update bea weblogic 7 to service pack 5 and the jconnector 5.5(EBF 11937: 5.5 ESD #13), and now some methods throws an error like this:
"...[2004-06-07 16:51:32.9] Exception: JZ0R0: ResultSet has already been closed.
[2004-06-07 16:51:32.9] Java exceptions stack:
java.sql.SQLException: JZ0R0: ResultSet has already been closed..."
I dont close the ResultSet but the error continue. This error occurs when the statment has different structure results.

Eduardo Cauduro wrote:
MORE INFO:Hi. Ok, so this routine gets it's statement passed in to it.
Can you guarantee that the statement is not used by any other
thread at the same time? And can you guarantee that the connection
that created the statement is never closed by anyone else while
some thread is running this method?
Joe
>
private void processApplyOrderDiscount(CallableStatement stmt, BasicOrder order) throws SQLException {
          // executa chamada à stored procedure
          long initTime = System.currentTimeMillis();
          boolean resultStatus = stmt.execute();
          long finalTime = System.currentTimeMillis();
          Logger.trace(
               "DBBasicOrder",
               "stp_wn_aplica_desc_pedido_u: " ((double) (finalTime - initTime) / 1000) " s");
          ResultSet rs;
          int orderItemNumber;
          double finalUnitPrice;
          BasicOrderItem orderItem;
          int status = -1;
          Vector orderItemList = new Vector();
          int resultSetCount = 1;
          int rowsAffected = -1;
          do {
               if (resultStatus) {
                    rs = stmt.getResultSet();
                    if (resultSetCount == 1) {
                         if (rs.next()) {
                              status = rs.getInt(1);
                    } else {
                         while (rs.next()) {
                              orderItemNumber = rs.getInt(1);
                              finalUnitPrice = rs.getDouble(2);
                              orderItem = order.newInstanceItem();
                              orderItem.setOrderItemNumber(orderItemNumber);
                              orderItem.setFinalUnitPrice(finalUnitPrice);
                              orderItemList.addElement(orderItem);
                    resultSetCount ;
               } else {
                    rowsAffected = stmt.getUpdateCount();
               resultStatus = stmt.getMoreResults();
          while (resultStatus || rowsAffected != -1);
          order.setApplyOrderDiscountStatus(status);
          order.setOrderItemList(orderItemList);
Result of procedure:
en_status
0
nm_item_pedido vl_unitario_final
1 7.8099999999999996
2 7.5500000000000007

SMARTWATCH 3 STUCK AFTER UPDATE 5.1.1 AND GO IN 30 CM H2O ON THE SEE

emma run tanbien with accessories. read XDA FORUM!!! http://forum.xda-developers.com/smartwatch-3/general/guide-soft-unbrick-reflash-stock-t2925027/ now try this http://www.xda-developers.com/android-wear-5-1-1-ota-downloads/ AFTER I PUT MY DEVICE IN TO WC.

I m very hungry.I have recived your smartwatch with birthday gift.this gadjet it good, wen it work!. but after the last upodate to 5.1.1 . the touch don't work, don't find the phone, dont' charge the watch.ad last but the most beutiful action is hot very hot during the charge! i do cocking an egg on the rear case. I try reset to emma tools but the pc don't find the smartwatch (i have intalled always driver, i'm developper ios ) on last thank sony to freez my smartwatch and for the future never sony product, i m prefer het my sheet on buy another sony product!!! thank you for always

Does Adobe provide Mental Health Support after talking with Customer Service?

I purchased LR5 recently and since LR6 was released soon after i applied for their free upgrade service, i put in the application but they hadn't responded in a few days so spoke to customer support. They literally didn't know the difference between LR6 and LRCC, they asked me to download the product from Adobe's website and provided a link for me to purchase it again, then insisted i use that link even even though i told them i already purchased LR, when they couldn't understand what it was i wanted they then insisted i call customer support...Literally customer support asked me to call customer support?
They then sent me a link to to download Ceative Cloud, when i said this is a subscription service not the standalone they said no they are the same now.
And finally in what was a lengthy and painfull process i received this accusation at the end after which they literally ended the conversation abruptly:
Customer support: Please contact your reseller .
obsidian element: why would my reseller provide a free upgrade, this is the Adobe program not theirs
Customer support: I gave you the link else request you to contact our sales team.
obsidian element: i put in an aplication with adobe, im trying to find out why adobe hasnt responded to it so far.
obsidian element: are you able to find out what is wrong with the application adobe has or not?
Customer support: Request you to contact the person from whom you purchased it. This product is under someone else name.
Customer support: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
They literally accused me of theft even though i provided Adobe with my serial number and purchase reciept.

If anyone doesn't want to download LR6 use this link:
https://adobeid-na1.services.adobe.com/renga-idprovider/pages/login?callback=https%3A%2F%2 Fims-na1.adobelogin.com%2Fims%2Fadobeid%2FCreativeCloudDownloadWorkflowWeb1%2FAdobeID%2Fto ken%3Fredirect_uri%3Dhttps%253A%252F%252Fcreative.adobe.com%252Fproducts%252Fdownload%252F lightroom%2523from_ims%253Dtrue%2526old_hash%253D%2526client_id%253DCreativeCloudDownloadW orkflowWeb1%2526scope%253DAdobeID%25252Copenid%25252Cgnav%25252Ccreative_cloud%25252Cread_ organizations%25252Cadditional_info.screen_name%25252Cadditional_info.secondary_email%2526 api%253Dauthorize%26state%3D%257B%2522ac%2522%253A%2522creative.adobe.com%253ALogin%253ADo wnload_lightroom%2522%252C%2522av%2522%253Anull%252C%2522di%2522%253Anull%252C%2522mc%2522 %253Anull%252C%2522pl%2522%253Anull%257D&client_id=CreativeCloudDownloadWorkflowWeb1&scope =AdobeID%2Copenid%2Cgnav%2Ccreative_cloud%2Cread_organizations%2Cadditional_info.screen_na me%2Cadditional_info.secondary_email&display=web_v2&denied_callback=https%3A%2F%2Fims-na1. adobelogin.com%2Fims%2Fdenied%2FCreativeCloudDownloadWorkflowWeb1%3Fredirect_uri%3Dhttps%2 53A%252F%252Fcreative.adobe.com%252Fproducts%252Fdownload%252Flightroom%2523from_ims%253Dt rue%2526old_hash%253D%2526client_id%253DCreativeCloudDownloadWorkflowWeb1%2526scope%253DAd obeID%25252Copenid%25252Cgnav%25252Ccreative_cloud%25252Cread_organizations%25252Caddition al_info.screen_name%25252Cadditional_info.secondary_email%2526api%253Dauthorize%26response _type%3Dtoken%26state%3D%257B%2522ac%2522%253A%2522creative.adobe.com%253ALogin%253ADownlo ad_lightroom%2522%252C%2522av%2522%253Anull%252C%2522di%2522%253Anull%252C%2522mc%2522%253 Anull%252C%2522pl%2522%253Anull%257D&state=%7B%22ac%22%3A%22creative.adobe.com%3ALogin%3AD ownload_lightroom%22%2C%22av%22%3Anull%2C%22di%22%3Anull%2C%22mc%22%3Anull%2C%22pl%22%3Anu ll%7D&relay=87780679-64f0-43cf-99c5-a39d30967954&locale=en_US&flow_type=token&dc=false&eu= false&force_marketing_permission=true&client_redirect=https%3A%2F%2Fims-na1.adobelogin.com %2Fims%2Fredirect%2FCreativeCloudDownloadWorkflowWeb1%3Fclient_redirect%3Dhttps%253A%252F% 252Fcreative.adobe.com%252Fproducts%252Fdownload%252Flightroom%2523from_ims%253Dtrue%2526o ld_hash%253D%2526client_id%253DCreativeCloudDownloadWorkflowWeb1%2526scope%253DAdobeID%252 52Copenid%25252Cgnav%25252Ccreative_cloud%25252Cread_organizations%25252Cadditional_info.s creen_name%25252Cadditional_info.secondary_email%2526api%253Dauthorize%26state%3D%257B%252 2ac%2522%253A%2522creative.adobe.com%253ALogin%253ADownload_lightroom%2522%252C%2522av%252 2%253Anull%252C%2522di%2522%253Anull%252C%2522mc%2522%253Anull%252C%2522pl%2522%253Anull%2 57D&ctx_id=download_lightroom&idp_flow_type=login

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

"No SIM card installed in the iPhone you are attempting to activate" after updating to iOS 5. Living in Canada with Rogers service provider.

Any solutions yet?
"No SIM card installed in the iPhone you are attempting to activate" after updating to iOS 5.
Living in Canada with Rogers service provider.

Its an IMEI issue. In my case, about a year ago, after originally purchasing my iP4 from AT&T store, I had a prox. sensor issue. Went to the Apple Store, they replaced the phone. Here is where it all stems from. The IMEI of the new phone was never updated in AT&T/Carriers systems. For iOS updates prior to iOS5, this was not an issue. My phone did its iOS updates along the way with no probs. However, when I updated to iOS5, the firmware did not match the IMEI with what AT&T/carrier had. When I went to Apple Store for the issue about 3 days ago and was given a new phone....again....the new phones IMEI was never updated with AT&T/carrier. I then again attempted the upgrade to iOS5 with the new phone and iOS5 bricked that one also. Today, at the store, we tried 3 replacements with same outcome.
So, after 4 hours and 3 replacement phones with Apple Store Tech (BTW totally gobsmacked), we solved the issue. Luckily, due to iPhone 4S launch, there was an AT&T guy there with a computer tied to the AT&T network to work along with us. The issue is......once the IMEI's on carrier account and phone do not match, iOS5 shuts down the sim card reader within phone.....forever. How to reverse this?......this is a question Apple needs to come up with, because with my case, they have 5 "bricked" phones.
What solved the issue was to get a new phone with iOS4.3.5, new SIM from carrier/AT&T, have carrier/AT&T (in their system) change/match the IMEI to the new phone and activate new SIM. Then, do iOS5 upgrade.
Simple and makes total sense..........however........there is an internal firmware (Apple Security??) issue that bricks the phone once IMEI's dont match.
I am now on iOS5.....no problems......so far. Good luck to all others.

3gs no service after updating to ios 5 tried network reset, reset all settings and even restoring from back been with out phone for 3 weeks now need help telus cant find network problem and apple has bad customer support please help!!!

my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.

I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well.

I have problem with my iphone 5 after update there's no service or stay searching for network

hi i just ask for help cuz my iphone5 not work as will after update from ios6 to ios7.0.4 in first time network lose and now saty searching for network !!

Hey ahmed eg!
I have an article here that I believe will help you troubleshoot this issue:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
Thanks for coming to the Apple Support Communities!
Regards,
Braden

After updating to Yosemite some of my photos will open and then Ill get a black screen with an apostrophe. How can I fix this?

After updating my OS to Yosemite 10.10.1 some of my photos will not display. All of the previews will be there but when I click to open them they open up larger for a second and then the screen goes black and I get a grey apostrophe sign. I updated iPhoto to 9.6 (910.29) and also repaired my permissions. The problem still exists. Can anyone help me? I also have issues with iTunes but that's another story.

According to the link I provided it could still have its logging service running. Did you read the info in the link I provided? You can check it by launching Activity Monitor and under CPU search for cleanup.
Since the photos are in the library I don't see the need at this time to reinstall iPhoto. Maybe later. Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

My iphone 3gs is not activating after updating my software with i tunes...what shall i do? cant i go back to my normal version which was ios 4.1

my iphone 3gs which is not associated with this accunt is not activating after updating the sof tware, it connects to i tunes but i tunes says "we arh your unable to continue with your activation at this time, please try again later or contact customer care". my iphone aslo just says it cannot be activated or something like that every time i try. i have been waiting for 4 hours now but it still hasnt worked. how can i uninstal this update and go back to my old version which ws ios 4.1 or or ios 4,3. i dont even know what version it updated to, im assuming it is ios5 but not sure. it says try connecting to i tunes as well but it is connected and i tunes cant activate it either. my phone is connect to a wifi but it stll says no service.
i will really appreciate some help.
thanks.

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..

Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594

After updating my Iphone 4s to os 7.1.1 ota, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset! My phone has the itunes logo and charger symbol on it .

After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Smartwatch 2 Brik after update with Update Service

Similar Messages

Maybe you are looking for