Smartwatch 2 no backlight after update

.hello, I have a new smartwatch2. when I first charged it the backlight was working, after pairing it took an update and then no backlight anylonger. I,ve tried the menu affichge (sorry I'm frnch I don't know what the menu is in english) I've tried to change the intensity ven unchecking the ambiant light detection but no change: 0 backlight. I'vedownloaded the "sony update service" reinitialie the watch andthen 'backlight' is back!! (it isnot an hardware issue) but as soon as I pair again with a phone (mine is an xperia Z ultra in 4.3 - but I'vealso tried with my son's wiko that is in 4.1.2) it takes the update again, reboots and backlight is gone...? Am I alone with that issue, did imiss somethng??

take it back to the store ASAP
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

SmartWatch 2 died after update with Sony Update Service

After problems with Call Handling app after update of my xperia z ultra to Kitkat 4.4.4. I was told by support to repair my firmware using PC Companion. It didn't help. Afterwards I was instructed to update my SW2 firmware with Sony Update Service (SUS).
I downloaded SUS and installed on my PC and followed the instructions. It said that the SW2 already has latest version. I clicked continue and after 40% it failed saying that there was an error with connection click retry or contact support. I tried several times - all attempts failed.
After I tried turning on my SW2 but it was dead. And any other steps didn't help to turn it on.
Nearest Service center is in Moscow, I live in Astana, Kazakhstan. So I am not even sure if they can help us even if I spend my time and money to take it there.
So the bottom line is - never use SUS to update your watches, folks.

ello everybody
The problem is solved by Sony
You will find an update for smartwatch 2
This update will solve our problem
Have fun

Lid closing does not suspend after update today

...and again: after todays update lid close does not longer trigger suspending my t420s. The last times(!) the cure came always with another update. Please do it again It saves a lot of time.
Thx ahead

I spent a lot of time with reading threads about this topic and I tried all friendly hints and tricks. But I'd never achived a real solution. Everytime it was "magical" fixed with one of the next updates. I guess this happens the 3rd time now. All I want to say is: "thank you for fixing again". For me it's a funny sport after updating: check lid close suspend, check backlight, check bumblebee. I can live will all this tiny issues followed by a fix. That's why I love Arch:)
Last edited by wwn (2014-10-07 08:02:20)

Apple cinema Display problem after update

I had a similar problem to lain Maclreud
Immediately after updating to 10.4.11 and rebooting the toparea on my cinema display went dim and I saw the 2 short, one lon blinks on my power display LED
I didn't try it on another computer yet or try to change my power source but I may need a new backlight card as well. Please post if you have had similar problems after updating and suggest possible solutions.

Have you tried the Command-Option-P-R keys to reset the PRAM? (Maybe the upgrade has messed up the display settings?)
http://docs.info.apple.com/article.html?artnum=2238

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Ios 5 Update New Features says that iCal now has a week view for iPhone but after updating last weekend, I don't see any week view--just List, Day and Month..How do I get the week view?

ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?

Rotate your phone to landscape.

Ipod Touch 5 will no longer sync after update 7.1.2

After updating from iOS 7.1.1 to 7.1.2 my Ipod touch 5th gen no longer syncs with my iTunes 11.3.1.1 when connecting it to my computer (windows 8.1) what comes up on my touch's screen is "trust this computer?" I press the "trust" button then a few seconds later I get the disconnected tone from my computer and nothing else happens (it still charges) and just checked it out on my Windows 7 computer (iTunes 11.3.1.2)and it recognized it fine (but the other computer has my playlists) I've tried updating to iTunes 11.3.1.2, updating iPod drivers and uninstalling then re-installing iPod drivers and iTunes is still not connecting to my iPod. Help please.

On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
You won't lose any content, you're not deleting that, just the programs that access them.
What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
My iPad and iPod did exactly the same thing and this is how I fixed it.

Can no longer read text on browser itself--tabs, headings, etc.--after updating to v 4. How can I enlarge these fonts?

I just updated to Firefox 4.0. I made NO changes to existing settings. After updating, font size of BROWSER headings, tabs, etc. appear so small that I am barely able to read them. (Note that I am NOT talking about font size on web pages--just on browser itself. ) Have used firefox for years--don't want to give it up--but will have to if can't find a solution for this.

I don't know where it is going to look. As I did all the Orthoptera, haing to go to the source of every page, andchanging the links to the moths to the Orthoptera, I had to do the same with other Oders. Now I am on the Diptera, and went to the previously created Orthoptera gallery and changed the text and link from Orthoptera to Diptera. But it still shows text and link, moth, instead. So I continue to have to go to each pages source coded and change individually.
Here is what I don't understand. When I go to the folder that is at C://program files/adobe/adobe photoshop cs4 (64 bit)/presets/web photo gallery, the renamed, copied and modified folder, Diptera is there, and come up in the choices of templates. But the text and link modifications don't occur when the gallery is run. Where could it be going to get the moth stuff, when it goes to this folder for the template?
What you said about the 64 bit makes sense, but I don't know where it could be going to create the gallery when the folder named Diptera is ther.

HELP! iPod no longer works after update

I've been using my 20gb clickwheel ipod without incident for a year now, my last update had been iTunes 5 and hadn't updated my iPod recently either (why bother..it worked fine?).
I wanted to purchase music from the iTunes music store, but it wouldn't let me unless I upgraded to iTunes 6 and updated my iPod. OK - so I did that- upgraded iTunes to 6.0.1 and updated tghe iPod using the latest updated dated 2005-10-12. Then the horror begins.
On the first attempted synch post update - my iPod screen turned into a folder/exclamation point icon and stopped working. I tried resetting by holding down the center button and menu..it restarted and went back to the same folder/exclamation point icon. No luck.
I've tried restoring it repeatedly and then synching my library back to the now clean and restored iPod and it stops synching at different points and crashes (after 31 songs - crash iTunes - iPod freezes on the "Do not disconnect" screen - strange clicking noise - restore - try again - 58 songs...same... restore ..again...45 songs.. you get the picture).
It worked fine BEFORE the update except I couldn't purchase music. There has been NO change except installing the updates (it hasn't been jostled, dropped or anything). What can I do? The update killed my iPod?!!!! I am at my wits end!!!!!!
-Tory

OK..I've tried many things and my iPod is still hosed after updating. I upgraded my Mac to Tiger. I was told that the there might be some issues with synching using firewire with the new update - so I bought a USB cable and tried synching with that.
I have the same issue as before. I can restore the iPod, but when I start synching my music from Itunes back to the blank, restored iPod - it synches up anywhere from 20-200 songs and then freezes (spinning beach ball on one song halfway synched for an hour - then force quit iTunes - and start all over again: restore, synch, crash).
You know, I got burned by the 1st generation 5gb iPod battery issue, then the headphone jack stopped working on my 2nd generation, now my monochrome clickwheel iPod freaks out after Apple forces me to update so I can get my paid music back (it removed, yes, REMOVED my purchased songs because I was still using an older version of iTunes - when I updated to 6 I got them back - how Microsoft is THAT?).
I am really losing my faith in Apple's ability to make a quality product.I am despondent. If anyone has any advice - I would be most grateful...

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
How can I solve this problem?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

Macbook 2.4 2008 after update 10.6.8 and firmware, won't fully boot

Weird problem after updating to 10.6.8 from 10.6.0 (fresh install).
I went thru Software Update, it downloaded 10.6.8 and the other updates. It also found that I needed a Firmware Update, which I also choose to install.
The updates went thru okay, including the Firmware. Everything went exactly as it should. The machine booted as per normal.
Afterwards, I checked that it had updated normally to 10.6.8 and everything checked out okay.
I left the Macbook plugged in and in Sleep. It was like this for probably 24 hours. NO BATTERY INSTALLED (don't know if this could be a problem, but I don't see how). I just came back now to find that I can't get back to the desktop from Sleep, nor can I boot to the desktop.
Specifically, here's what I see:
- first, on trying to Wake from Sleep, the screen remained black. The Superdrive spun up, the white light at the front of the Macbook was pulsing. But no desktop.
- I then held the Power button till it shut down. Then rebooted. And here's what I got:
a) no startup chime
b) I could Superdrive and fans and HD spin up
c) the display turned on, but didn't show the startup screen, no Apple logo, etc. It just went to the Desktop in about 10-15 seconds.
d) on the Desktop I can see:
- the Desktop background
- the Disk Utility window open to Repair Permissions, which was the last thing I'd done on the Macbook (permissions checked out okay)
- and THIS: I've never seen it before, but the Desktop is a bit "fuzzy", I can see the background and the Disk Utility window though, as well as a NUMBER OF SHORT BARS towards the bottom of the screen, and there's a BAR BY BAR PROGRESS from left to right (the first bar is filled in, then the second, etc.), BUT the progress DOESN'T make it to the last bar before the SCREEN GOES BLACK AGAIN (*sorry for the caps, but I'm trying to highlight the salient parts).
Any ideas?
Is this somehow related to the Firmware update? I remember that the Macbook booted fine after the Firmware update, the long horizontal progress bar was filled in as normal and got to the end; IIRC the Macbook then booted fine. I believe it was at this point that I repaired Permissions. Then left the Macbook, only to return to find it as it is now.
Any help much appreciated.

Update:
Installed 10.6 and did all the updates, am now using it with an external monitor. Working fine as a Mini, but a real bummer re. the black or blue screen.
Without external monitor connected, I get this:
- I can boot, with startup chime, from DVD or external hard disk, after holding Option at startup and choosing bootable volume on screen; I can also boot from the DVD by holding down C key
- When I boot, the startup chime doesn't sound right away, as there's a short delay; in that time (a few seconds), the LED light at the front of the Macbook FLASHES 5 TIMES; there are NO error beep sounds
- The boot screen starts up, I get Apple logo and spinning wheel, and at about the usual point where the screen goes blue for a couple seconds, before the Macbook boots to the desktop, the screen goes black
- The Macbook seems to go to Sleep, with the screen black; the front light pulses
- I can wake the Macbook from Sleep by pressing a key
- Previously, after waking from Sleep, the Macbook went to the desktop -> in other words, the Macbook completed startup with the black screen;
- When the Macbook woke from Sleep, there was a slight delay of a few seconds before the Trackpad and Keyboard became active; I then had a few seconds to use the Trackpad before the screen went black again, and the Macbook went back to Sleep
- Now, though, when I wake it from Sleep, I get a Blue Screen, and the screen stays blue; i.e., doesn't turn black and the Macbook doesn't sleep
All of this refers to booting the Macbook without an external monitor connected.
When booting with an external monitor, everything works normally.
POINTS OF PARTICULAR INTEREST:
1) all of this happened from the time I updated the Firmware, as per Software Update
2) the screen works during the boot process, then goes black
3) boot completes even with black screen
4) the screen works for a 10 seconds when Macbook wakes from Sleep, then goes black again
5) now, the screen goes blue - and stays there - when the Macbook wakes from Sleep
6) Macbook works normally with external monitor; the Macbook's internal display is not recognized when an external monitor is connected; the iSight camera is not recognized
So, what the heck happened?
I can understand the internal display and/or onboard video getting broken, but then it should simply not work at all, right? How is it that it works "partially" or "temporarily", during boot and when waking from Sleep, before going black?
What is with the 5 flashing LEDs at boot or when waking from Sleep? (I can't find any info concerning the Macbook and 5 flashing LEDs, but only concerning the Macbook Air, and it refers to a battery problem).

I after updating to iOS 8 in photo gallery folder is missing.

I after updating to iOS 8 in photo gallery folder is missing. Of what I can not be divided with old photos no one. There is a folder in which the recently added only recently added More Photos. How to return this folder?

Hello Simmo1997,
Sorry to hear about your issue but let’s see if we can get your iPhone back up in running. If your iPhone is disconnecting when trying to restore then check out the article below to get you started with isolating the issue. Let me know if it gets resolved or if you discover a new symptom.
iTunes: Resolve USB-related alerts
http://support.apple.com/kb/HT5772
Regards,
-Norm G.

Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9

I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
I deactivated home sharing on both machines and enabled it again. It still does not work.
On both machines iTunes displays the the library on the left side but like said it is not accessable
With Finder I can access the other computer from both machines without any problem.
Any help to solve this would be very much appreciated

first of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
@ least turned if off for troubleshooting purposes.
turn home sharing off on both computers, and make sure
(a) both Macs have access to the internet
(b) iTunes on both machines is authorized for the same iTunes account.
turn home sharing back on on both Macs.
does it work ?
JGG

Smartwatch 2 no backlight after update

Similar Messages

Maybe you are looking for