Smatrform and processing class

Hi,
I'm New to SAP CRM.
My requirement is to send a the activity transaction details to a customer as a PDF in the smartforms.
Here we can execute the action using a Smartform or Method call.
How to go about it.
How can we know the processing class for a gievn smartform. In which table can we find the entries or relationships between a smartform and processing class.
Regards
Lekha

Hi,
I am sorry. I am not able to understand ur question properly. Actually i did some smartfroms work in my organisation relating to CRM 2007.
Here, our functional people first assign the standard method and class and smartform. Then take a sample data. Then i used to copy the std form to zform and apply my logic in program lines. I got success.
The std methods and classes depend on the action type.
in service area i used.
cl_doc_processing_crm_order (processing class)
crm_srvorder_exec_smart_form (method).
if u goto std one u find a lot.
u better get the details from the funtional team.
hope this will help you.
best wishes,
mallik

Similar Messages

  • What is Processing Method and Processing Class in Action Profile

    Dear all,
    I have defined an action for case management, to trigger an email after saving the case in Enterprise portal.
    Action is getting initiated in case document after saving, but after a while it is showing message 'Incorrect'.
    In the actions monitor report, error message showing that some problem in Processing Method.
    In my action I have maintained settings as below.
    Form name - SCMG_SMART_FORM_CASE
    Processing class - CL_SCMG_CASE_CONTEXT_PPF
    But I don't know what processing method should I give
    I could not find and values under F4 functionality.
    Please do advice me what method I can use here.
    and why we use processing method and processing class.
    your help will be highly appreciated.
    Thank you
    Raghu ram

    Hi
    DSD means Daily Salary Deduction for more check this table to understand abd DSD and the respective Processing class 77 V_T7INO1

  • PROCESSING.EVALUATION AND CUMULATION CLASS

    Hi,
    Can anyone send me the link/document for processing ,cumulation and evaluation class.
    I want to complete usage .
    I tried searching in forum but in vein.
    Regards
    Ananthi.M
    https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4685459
    https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4605028
    processing class
    I got these From the forum search                                                                               
    Regards
    Ananthi.M
    Edited by: Sikindar on Feb 18, 2010 1:27 PM

    I got these From the forum search                                                                               
    https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4685459
    https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4605028
    processing class
    Edited by: Sikindar on Feb 18, 2010 1:30 PM

  • Processing class 10 and partial period factor specification /807

    dear experts,
    I want to know the difference in specification of /801 or /802 or 803 or /804 or /805 or /807 when we give or maintain processing class 10 for an y customised wage type in table v_t512w_d. there is no documetation for /806 or /807 wage types .can any one send me the documetation on this or explain

    Just go to X013 PCR.  There you can find the documentation.
    Open the PCR in display mode and press F1 for documentation.
    Reward the points.
    Venu

  • Processing classes , evaluation classes and cumulation classes

    Hi All ,
       Can anybody give the details of PCR in HR and how to use processing classes and evaluation classes in PCR.
    Regards ,
    Santosh.

    Hi,
    we have an operation VWTCL which checks the Processing class and its specification in PCR.
    go to T.Code: PE04 and check the operations documentation you will get clarity.
    Operation VWTCL VV reads the specification of processing class VV for the current wage type in table T512W, and enters this as a single-character entry in the variable argument of the personnel calculation rule. Function VWTCL is a decision operation.
    for example:
    X010 Determination of valuation bases INTERNATIONAL
            VWTCL 01   Processing class
                ERROR      Cancel processing
              0
                ADDWT *    OT   Output table
        1
            VWTCL 01   Processing class
              0
              1
                ADDWT *    OT   Output table
                ELIMI Z    Elim.time period ID
    Regards,
    mohammed

  • Processing classes, cumulations, and evaluation classes for Surcharge

    Hi Experts,
    As I am working on Indian payroll in form 24Q the surcharge is not calculating properly it is displaying the TDS amount.
    and in surcharge column of form 16 is appearing total Taxable amount.
    Can any body send the nessessary sreen shots of process, cumulations and evaluation classes for the surcharge wage type.
    Thanks in advance
    Regards
    Srinivas

    solved thanks

  • Processing classes, cumulation classes and evaluation classes

    Hi Friends,
             What is the diff between  processing classes, cumulation classes and evaluation classes. where we see these three and what is the table no. for this?

    .) Processing Class - A wage type characteristic that controls processing during Payroll. There are different processing classes for the various processing steps that are performed within Payroll. During the payroll run, SAP R/3 processes a wage type in a specific processing step according to its individual specification in the respective processing class.
    Cumulation class - Cumulation class are used to cumulate the model wage types to generate the /1** technical wage types.
    Example - Processing class 20 is used for cumulation and processed by PCR X023. Now suppose you have set specifiction as 8. Now if you will check PCR X023 for spec 8, it says to cumulate wage type into cumulation class which are ticked. Like may be you want to cumulate a model wage type into /101, set PCL 20 as 8 and tick cumulation class 1.
    Evaluation Class - Wage type characteristic that controls processing when payroll results are evaluated and displayed. There are various evaluation classes for the different processing steps that are performed when payroll results are evaluated and displayed.
    Example
    In the standard system, the specifications for evaluation class 02 determine how a wage type is printed on a form  that is payslip.
    Specification 00: no printing on the form
    Specification 01: prints personal payments/deductions
    Specification 02: prints wage types included in the total gross amount
    Specification 03: prints wage types derived from time-based payments and included in the total gross amount

  • Processing classes and evaluation classes

    hi there could some one tell me the best site to understand processing classes and evalution classes of Great Britian Payroll.(or anyother documentation)
    many thanks
    srikanth

    These are a few which are Uk specific.But I dont want to proof anything to you .So if you dont tell me why you require the meaning of a PR class I dont think I can help you.  Thanks anyways.                                                                               
    50 Deductions processing using 'Ba                                             
      61 Deduct GB court orders from net                                             
      62 Deduct from taxable pay -->CYCL                                             
      63 GB deductions from working net                                              
      64 GB SSP/SMP absence amounts  -->

  • US PY - Processing Class and Cumulations

    Hi expert,
    I am facing following scenario , plz help me to sort that out...
    I have defined WT 1GAW,1GCC,1GSP, 1GBN
    AW - Award,
    CC - City Component
    SP - Shift Allowance
    BN - Bonus
    1GAW Weekly & Hourly
    1GSP Salaried & Weekly
    1GCC For all
    1GBN For all
    Under processing class and Cumulation ... Which category I have to select out of
    o
    1
    2
    3
    4
    5
    6
    Your prompt reply appreciated...Points would be given..
    Regards,
    Sejal

    Hello Sejal,
    When you create a WT use the Copy function from SAP Delivered model WT when creating the WT, so that the default setting of all the Processing class and Cummulation class with respect to Model WT will  be there in Created WT also. So that you can do only minimal changes when required for the WT.
    With Regards,
    S.Karthik

  • Error in processing class 10

    The scenario is like this u2026u2026u2026
    When an employee getting transferred within the company code or to other company code , HRA AND WASHING AND FACTORY allowance are getting doubled, to avoid this we have changed the processing class 10 from 0 to 1(Reduction with factor /801). After changing this those wage types is not calculating any double and the problem is resolved but the actual problem started the Wahsing and Factory Allowance is calculating based on attendance. After changing PC 10 from to zero 1 its not calculating based on attendance how to resolve this.
    Thanks in advance

    Hi
    Thanks for the reply. I have checked the all the options in PC 10
    0     No reduction
    1     Reduction with factor /801
    2     Reduction with factor /802
    3     Reduction with factor /803
    4     Reduction with factor /804
    5     Reduction with factor /805
    6     Reduction with factor /806
    7     Reduction with factor /807
    8     Reduction with factor /808
    9     Reduction with factor /809
    A     Reduction with factor /801, with rounding 005
    But none of above sloving my purpose. Without touching pcr is there any way to do or else pls guide me step by step how to handle with PCR
    Thanks in advance

  • Reading and processing file(s) in a filesystem

    I'm fairly new to java programming and need help.
    I need to write code which will and read and process 1 or many files from a filesystem. If a file is found, read and process it. Then do same for all files found.
    Please help.
    Thanks in advance!

    Some classes of the package java.io will be used .
    http://java.sun.com/j2se/1.4.1/docs/api/java/io/package-tree.html
    (The java.io.File has the methods list() and listFiles(), of which the former returns an array String[] and the latter returns an array java.io.File[]. )

  • Receive CSV attachment via Mail Adapter and process into ABAP proxy

    Hi,
    I have the following scenario:
    1. Receive e-mail with CSV attachment
    2. Process through Mail adapter (KeepAttachments = Yes in order to retain the CSV attachment)
    3. Receive into ABAP proxy (with CSV attachment)
    The next step is to read the attachment in the ABAP proxy and process the CSV attachment data into CRM.
    The CSV attachment contains the data I wish to process - the body of the e-mail will not contain this information.
    The problem I have is reading the attachment data in the proxy - not sure of the methods/class to call - anyone got any ideas ?
    Another question is this the best way to do this and process the CSV attachment data ?
    I know I could use the PayloadSwapBean to switch the payload to the attachment but then I am stumped with how the attachment is processed through PI 7.1 - how do you transform the CSV format payload into XML so PI will be able to process it through mapping.
    Either option is viable - an answer to either question would be great.
    1. How do you read the attachment data in an inbound ABAP proxy ?
    2. How do you transform the CSV attachment data after the PayloadSwapBean from CSV to XML ?
    Kind regards
    Colin.

    Hi Colin
    As you are not interested in processing the body of email. Swap the payload to the attachment using the PayloadSwapBean
    Change the content from CSV to XML using MessageTransformBean. Now pass this information to Proxy. You dont need to deal with attachments in proxy.
    It is not possible to read attachment in server proxy because the class and interface you create will not have data type which can refer to an attachment processing interface in ABAP.
    Thanks
    Gaurav

  • Apache with Tomcat and dispatcher class.

    I have a MVC design set up with a controller and dispatcher class. I am trynig to forward the results to a specific JSP. If I run the design completely within Tomcat, then everything works great. I have a tomcat site set up called /jsp. My servlet is within the jsp site. So if I do http://localhost:8080/jsp/mypage.jsp it will bring up the page fine. I then submit to and action of /myservlet?action=test. The servlet/dispatcher classes process and forward the request to "/jsp/mypage_result.jsp". All is fine and dandy.
    However, when I try to run this through Apache first let the MOD_JK2 send the JSP/servlet requests to Tomcat the dispatcher doesn't work. I alway get the ERROR 404 page within tomcat (see note 1 below). Even if I use a "./mypage_result.jsp", because the pages are in the same directory, I still the get the error. Can anyone help?
    What I think is happening is that when I make the inital request of http://localhost/jsp/mypage.jsp the request gets sent to Tomcat from Apache. Tomcat processes the jsp page and displays the result to the client. The user submits the data to the servlet (through Apache which pushes it to Tomcat). The servlet/dispatcher code runs and then gets ready to forward the request on. Where I get confused or I am completely guessing is that when the forward method gets called. Does it forward the request on as a HTTP request or as a request within Tomcat? I would guess it is an http request and the request comes in through Apache which (depending on the worker2.properties file) will or will not forward the request to Tomcat. This is where the problem happens. On this forward in the dispatcher class.
    Please help.
    NOTE 1:
    HTTP Status 404 - /mypage_result.jsp
    type Status report
    message /mypage_result.jsp
    description The requested resource (/mypage_result.jsp) is not available.
    Apache Tomcat/4.1.24

    After reading the documentation for the getRequestDispatcher method it seems that the file you are forwarding to must be in the same context. Well if it is in the same context within Tomcat, does it mean it is the same when I am trying to use Apache?
    Anyone out there go this to work?
    Thank you in advance for reading my post.

  • Tax model/type/authority to Processing class

    Hi All,
    I am configuring tax type, tax authority, tax model, can anyone tell me how we will attach all this things to Processing class of any wage type.
    I have checked in my existing wage type PC71, but it is not there.
    Thanks,
    Kumar

    The tax class in your tax model is the specification for processing class.
    If you used the existing tax class in  your model no need to do any thing, based on PC71's value , the tax model will be called. And the taxes will be accumulated to respective tax types / tax auth.
    If you creating a new tax class in your model , then that value will appear in PC71's value. The tax model will be called based on this new value you are selecting for any wagetype.. And the taxes will be accumulated to respective tax types / tax auth.
    Thanks,
    Amosha

  • Processing Classes in PY-IN

    Hi All,
    I have one small query. In my system, 1 wage type is getting projected on monthly basis i.e. every month, its getting added in the gross salary and showing up in Remuneration Statement. Whereas it shud get projected on yearly basis.
    Please advise by which processing class we can control the same.
    Regards

    Evaluation Classes
    Evaluation Classes  are generally used for reporting purpose. There are 20 possible evaluation classes. For each evaluation class, there will be a subset of values. The payslip and the Payment summary use evaluation classes. So u2013 For example : the payment summary uses evaluation class 11. SAP provides default settings for evaluation class 11 (Such as Taxable Gross, Tax, Lump sum A, Lump sum B etc). The consultant will go into each wagetype and set evaluation class 11 to a value based on where it is to be reported onto the payment summary.
    Cumulation Class
    This is used for storing certain wagetypes into a bucket. The bucket is the /1nn wagetypes. So, if a wagetype had cumulation class 01 set, this will add the value of this wagetype into /101 wagetype. This is actually how the total gross works as all wagetypes which are gross wagetypes are set with cumulation 01 which cumulates into /101 (Total gross).. Other uses for this are taxable gross, superannuation totals, totals for allowances, totals for deductions, etc.. There are 100 cumulation classes. These are either turned on or off.
    Hope This will help you.
    Regards

Maybe you are looking for