Smbd(383) deny job-creation

I am getting this error whenever I use Windows or Mac connect to my macbook air Lion
I am getting this error.
Aug 7 15:26:18 MBAir sandboxd[385] ([383]): smbd(383) deny job-creation
It won't let me connect until I restart the file sharing in system preferences. It consistently doing it after a reboot and I have to restart the service everytime I restart my macbook air.
Does anyone know what is this error?

I have the same problem.
I enable SMB file sharing on my mac mini 2011. When i access it from my windows 7 PC it works.
But if i restart the mac mini i can't access SMB shares from windows until i restart the SMB file sharing in system preferences.
No solution.
Come on Apple !

Similar Messages

A question about Job Creation

Hi Expert,
By JOB_OPEN, JOB_SUBMIT, JOB_CLOSE, we can schedule a job.
When the first two FMs is executed, the job is still in 'scheduled' status. Only when the FM JOB_CLOSE is executed, the job will be in 'released' status.
In my applicaiton, I need to check the job status. If the job is in 'scheduled' status, I think that the job creation is not successsful; Otherwise, the job creation is successful.
But the issue is, if job is in 'scheduled' status, how can I know whether all three FMs is executed in the job creation or only JOB_OPEN and JOB_SUBMIT are executed while JOB_CLOSE still not starts?
In the later case, the applicaiton should wait some time and check the job later.
Thanks for your support
Best Regards, Johnney.

Hi,
Suppose there two APIs.
In API1, there are four steps:
1. call FM JOB_OPEN
2. call FM JOB_SUBMIT
3. Save the Jobname and Jobcount in the DB
4. CAll JOB_CLOSE
in API2, there are two steps:
1. get the Jobname and Jobcount from the DB
2. Call FM BP_JOBLIST_STATUS_GET to get the job status.
API1 and API2 are executed asynchronically. Consider the following case:
After STEP3 is executed(STEP4 has not yet been started), the API2 starts to run. Now the job status that API2 get is 'Scheduled'.
This is not correct, because the job creation is still not finished. The API2 should wait some time and check later.
So my question, is how API2 know that the job creation is not finished.
Thanks & Best Regards, Johnney.

Access is denied while creation hfm classic application in workspace

access is denied while creation hfm classic application in workspace. i have given full roles and access to my admin user. still i am facing same issue.
i am trying to create classic application workspace under
Access is denied.
Access is denied.
Show Details:
Error Reference Number: {401A779B-3846-4645-852B-D036AF74C7DA}
Num: 0x80070005;Type: 1;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 1087;Ver: 9.3.1.0.1502;
Num: 0x80070005;Type: 1;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 768;Ver: 9.3.1.0.1502;
Num: 0x80070005;Type: 0;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 3430;Ver: 9.3.1.0.1502;
Num: 0x80070005;Type: 0;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHFMwManageApplications.cpp;Line: 2152;Ver: 9.3.1.0.1502;

Hello,
Do you have the HFM ADM drivers installed on the workspace server -- I believe if you do not have those installed then you are going to have some issues.
Regards,
-John

Job creation table

Dear All,
May i know what is the table to store a background job's master data? I mean the table which stored the job creation date, change date, change by, event.
Please comment.

Hi Friend,
Check the following table:
BTCUED
Hope this helps you.
Regards,
Chandra Sekhar

PJM/ATO Job Creation

Cannot successfully create a dj for an ATO item that has a project # referenced using the WICDOL module: AutoCreate Final Assembly Orders. Order is scheduled and booked. Status is Awaiting Job Creation. Run AutoCreate. Job completes with a warning. If the same item is ordered and scheduled without a project number I can create a WIP job with no difficulty. A TAR has been opened but the progress has been slow. Any thoughts would be greatly appreciated.

Hi,
Just try by giving task number, along with project number. Iam assuming that you are giving project number to all items in the SO i.e. Model, option class,option, etc.
Reg
Sreenivas Amisagadda

SQL job creation/modification/deletion auditing?

I have a job 'pop-up' 3 days ago on one of our Servers and of course 'nobody' is coming forward and saying 'I did it'. Is there a way to determine who created the job after the fact?
Going forward, is there a way to be notified via email when jobs are created/modified/deleted in SQL 2005 Enterprise? Trigger maybe? I'm not having much success searching the web on this.

--Job creator / owner
select a.name
as job_name ,b.name
as job_owner from sysjobs a
, sys.syslogins b
where a.owner_sid
= b.sid
n
Trigger on sysjobs table
create
trigger trigg on msdb.dbo.sysjobs
after
insert ,
update
as
EXEC msdb.dbo.sp_send_dbmail
@profile_name
= 'name_of_mail_profile',
@recipients = '[email protected]',
@body = 'New job creation alert',
@subject = 'Automated Message'
-- Who ran the job ?
select a.name
as JOB_NAME , b.message
from msdb.dbo.sysjobhistory b
, msdb.dbo.sysjobs a
where
a.job_id=b.job_id
and a.job_id
= 'AD5AAF63-4C4D-496A-AAFB-98F981E69BC2'
and b.step_name =
'(Job outcome)'
Thanks, Leks

External job creation ORA-27370

Hi Team,
In oracle documentation it is mentioned
The CREATE EXTERNAL JOB privilege is required for database users who want to execute jobs that run on the operating system outside the database. By default, this privilege is granted to all users who have been granted the CREATE JOB privilege.
So as per documentation it is not mandatory to be sysdba could yo please make sure the user who run the job is having CREATE EXTERNAL JOB privilege
However although user has CREATE EXTERNAL JOB
running the following
When running the following statement below:
SQL> BEGIN
DBMS_SCHEDULER.create_job (job_name => 'test_shell',
job_type => 'EXECUTABLE',
job_action => 'ls -l',
start_date => SYSDATE,
repeat_interval => 'FREQ=MINUTELY; INTERVAL=1',
enabled => TRUE,
COMMENTS => 'Calling shell script from Oracle');
END;
getting
ERROR at line 1:
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing extjob wrapper failed with
status: 13
ORA-27301: OS failure message: Permission denied
ORA-27302: failure occurred at: sjsec 3
ORA-06512: at "SYS.DBMS_ISCHED", line 185
ORA-06512: at "SYS.DBMS_SCHEDULER", line 486
ORA-06512: at line 2
using the following it worked
Create the script /tmp/run_test.sh with:
#!/bin/bash
date >> /tmp/run_test.log
b. Change permissions to 755 /tmp/run_test.sh
c. Execute the script and confirm that the file /tmp/run_test.log is created.
d. As sys execute:
begin
dbms_scheduler.create_program
program_name => 'RUN_TEST',
program_type => 'EXECUTABLE',
program_action => '/tmp/run_test.sh',
enabled => TRUE,
comments => 'testing script'
end;
begin
dbms_scheduler.create_schedule
schedule_name => 'EVERY_MIN',
repeat_interval => 'FREQ=MINUTELY; INTERVAL=1',
comments => 'Every 1-mins'
end;
begin
dbms_scheduler.create_job
job_name => 'RUN_TEST_JOB',
program_name => 'RUN_TEST',
schedule_name => 'EVERY_MIN',
comments => 'test script ',
enabled => TRUE
end;
So is it mandatory to use sysdba?
Thanks in Advance,
Jo.

Thanks Grey,
The db version is 11.2.0.3 the OS user is the owner of oracle software for permissions all were done as per note 1059981.1
Regards,

Batch Job creation by adding entries to SAP tables

Hi Experts,
I understand there are at least 4 SAP tables involved with Batch Jobs.
I need to create many variants and manually creating them using sm36 is tedious.
If I add entries in the TBTC* tables, can the batch jobs be created without causing inconsistency ?
The batch jobs are all similar, based on a zprogram that selects from sap tables data and updating to a ztable. There are many variants I need to create and assign to the batch jobs. So, if I can update the entries in the tables to achieve the same, it would be much quicker and reduce human error and make checking the job setup faster and easier.
Please advise.
regards
M Russo

Hi,
There are many function modules which helps you to create the variants.
You need to create a simple report to automate your variant creation and batch submission.
use function module RS_CREATE_VARIANT to create variant use the structure RSPARAMS to specify the value of your selection screens
Go to the function group BTCH . Use JOB open close to submit the batch jobs with variants anor any ther fm in the BTCH function goup.
Hope this helps rather than directly writing to tables.
Thanks

Batch job creation for sending email if the invoice is aged

Positive confirmation: Send system notification to the requestor if:
a) An invoice is received and GR is not yet posted in the ECC system.
b) An 'aged' invoice and GR is not yet posted in the ECC system.
This requirement is for USA only. i.e., we have only one company code which is 8960.
Identifiers of the invoice are
Company Code = u20188960u2019
Invoice Document Type = u2018R9u2019
Use table EKBE for relationship between Invoice, Goods Receipt and Purchase Order.
The field EKPO-BEDNR contains the Shopping Cart Number
Implementation Strategy
1. To send email if the invoice is aged.
Create a program that will run as a job. This job will frequently check for invoices related to SRM Shopping Carts received from E2OPEN. If an invoice is aged and there is no Goods Receipt posted through confirmation from SRM, then an email will go out from ECC system to the requestor. Using the Shopping Cart number on PO, find the requestor information (email ID) from SRM through an RFC call. This job will run once in a day and should have a parameter in the program for the age of the Invoice.
Both the emails should contain a link (To be taken from SRM system, to be supplied) to log into SRM system. The email will also contain the Shopping Cart number and the Description of the item, and a message to Confirm this, including age of the invoice if aged.
Please let me know how to create the batch job.
Regards,
Venkat
Edited by: VenkatG on Sep 1, 2009 3:14 PM

Do not pass the COMMIT_WORK flag... Leave it blank. Any transaction for the data integrity, one should never use COMMIT WORK related statements. Normally SAP transactions will have the COMMIT WORK at the end of transaction which is enough for any thing that is added part of the customer exits...
Hope this helps.
Regards
Anjaiah

Job Creation via BAPI using BackgroundJob

Hello,
I'm working on Access and I'm submitting a JOB in SAP; till we were in release 4.7 my database worked but after the relase change I'm not able to us it again.
When I call my function in order to do "AddABAPStep" the system give me a Run-time error '4701'
"Non-BAPI methods with export parameters are currently not supported"
Hereafter the instruction that doesn't work :
oJobrun.AddABAPStep ExternalUserName:=pMUsrUser, JobName:=Jname, Jobcount:=Jcount, AbapProgramName:=xabap, AbapVariantName:=xvar, Return:=oReturn
Is there someone that is able to help me ?
Thank you in advance
Guido Chiappa
Edited by: Guido Chiappa on Jul 14, 2011 11:31 AM

Hi,
May help you:----
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/edab9790-0201-0010-479a-98fcc7ebc7bd?quicklink=index&overridelayout=true
Regards,
Suman

Batch job creation for sales order

Hi,
How to create a job and schedule it so that it assigns reason of rejection to sales order line items for a particular sales org which are not delivered and after doing so, the status of the sales order is set to complete.
regards
sachin

Hi,
Execute transaction SM36
Define Job name, Job class, Target server
Click on 'START CONDITION' button
Click on 'Date/Time' button
Enter Scheduled start DATE & TIME. Check mark 'Periodic Job' field. Click on 'Period values' button and select 'Hourly' or 'Dialy' or 'Weekly' or 'Monthly' or Other period and SAVE. Go back to main screen.
Click on 'STEPS' button and enter Program name and Variant under box 'ABAP Program'. Click on 'Print Specification' button and enter Printer name under 'Output device' and SAVE
Click on SAVE button until you get message on bottom of the screen that describes 'Job XYZ saved with status: Scheduled'.
Click on 'Job overview' button or execute SM37 transaction.
Select the appropriate 'Job name', 'User name', 'Job Status' & Schedule date under 'Job start condition' and click on 'Execute' button or press F8.
You will now see all your scheduled JOBS.
regards,
mahantesh

Back ground Job Creation and maintanance ?

Gurus
I have a report, which will take more than the normal 10 min time.
ISo i have to run it in the back ground session.
Please let me know how to create a back grund job and maintain and process it?
Also please tell me the Tcodes associated with this process.
Thanks a lot.. Points will be awarded....of course...
Meenakshi.N

On the report screen, press F9 (or program -> execute in background). Give the printer name and to send to spooler or print immediately option in the initial screen. Press OK.
Then, give the start time (options will appear) and click on "Save" button.
Now, to see the status of the job, go to SM37.and execute by your username. Here you can see the job status, spool etc.
Let me know if you have any questions.

Job creation issue

hi all,
we have a requirement as follows:
we need to create a job2 which will trigger automatically on a daily basis after a job1 completes .Also,this job2 should take all the vendor numbers from lfa1 table that are updated daily ( job1 is updating vendors daily into lfa1) and these vendors numbers should be used as a selection screen variant for running a program that job2 will trigger.
After this,email should be sent to users that thses vendors are processed or not processed by our job2.
Any pointers on how to design this requirement.
Thanks

Hi
You can easily find out the newly created vendors from LFA1 for the selection condition. Create Job1 with the first program to update the LFA1 table.
And then define your job2 for the next program to get the details of newly created vendors from LFA1. For this job, maintain the start condition with 'After Job option'. In that option mention name of Job1.
In the Job2 program write the code to send email.
Hope this is clear to you.
Thanks
Sourav

Bakcground Job Creation

Hello everybody,
I have the next requirement, I need an option in the menu in a Z dynpro program to execute the transaction in a background job, the problem is that i need it to work just like this option works with selection screens, that in the Program option in the menu it has the Execute in background, so it generates automatically the job, I've seen the functions JOB_OPEN, JOB_SUBMIT and JOB_CLOSE they will work the problem is with the variant cause there is no variants and i don't know how the system generates some kind of temporal variant with a name such as &00000000054 and so on, does anyone know how can i do this, thanks in advance.
Regards,
Julio Cesar

You don't need a temporary variant for this. Just use the SUBMIT statement and pass your data(captured in the screen) to another "Z" program using the WITH statement. Problemm solved.
data:   l_valid,
        ls_params like pri_params,
        l_jobcount like tbtcjob-jobcount,
        l_jobname like tbtcjob-jobname.
* Get Print Parameters
call function 'GET_PRINT_PARAMETERS'
       exporting
            no_dialog      = 'X'
       importing
            valid          = l_valid
            out_parameters = ls_params.
* Open Job
l_jobname = 'Z_SUBMITTED_PROGRAM'.
call function 'JOB_OPEN'
       exporting
            jobname = l_jobname
       importing
            jobcount = l_jobcount.
* Submit report to job
submit z_submitted_program
       with P_parm1 = <some_value>
       with P_parm2 = <some_value>
       via job     l_jobname
           number l_jobcount
       to sap-spool without spool dynpro
           spool parameters ls_params
              and return.
* Schedule and close job.
call function 'JOB_CLOSE'
       exporting
            jobcount = l_jobcount
            jobname   = l_jobname
            strtimmed = 'X'.
Regards.
Rich Heilman
Edited by: Rich Heilman on May 21, 2008 3:51 PM

Error in Job Creation in Core HR

Hi All,
I am trying to create new job in 'JOB' but i am getting error like 'value is not valid context for the descriptive flexfield per_jobs' when i am going to create it.
Please help me to sort out this issue.
I have created EEO setup too. whether this is issue is related with that. KIndly help me
Regards
Basaw

Hi,
In addition to the above, please post the steps to reproduce the issue.
Thanks,
Hussein

Smbd(383) deny job-creation

Similar Messages

Maybe you are looking for