SMC agent on M9000 service processor

Hi, I'm trying to monitor an M9000 Platform
at this time domain agents are up and running but the service processor agent's is stopped and I can't find how to start it.
this is the output from setsunmc and showsunmc
XSCF> setsunmc -s 140.126.65.82 -z segob -c public -p 1161 -t 162 -e 163 -a 161 -d 1161
setsunmc: Updating Sun MC config file
XSCF> showsunmc
Agent Status: Disabled, stopped
Setup Status: Set up
SunMC Server: 140.126.65.82
Security Seed: segob
SNMPv1 Community String: public
Agent Port: 1161
Host Trap Port: 162
Host Event Port: 163
SNMP Agent Port: 161
Domain Agent Port: 1161
XSCF> setsunmc enable
setsunmc: Agent enabled.
setsunmc: Note that this command will return before SunMC is completely enabled.
XSCF> showsunmc
Agent Status: Enabled, stopped
Setup Status: Set up
SunMC Server: 140.126.65.82
Security Seed: segob
SNMPv1 Community String: public
Agent Port: 1161
Host Trap Port: 162
Host Event Port: 163
SNMP Agent Port: 161
Domain Agent Port: 1161
Do you have any clue why Agent won't start?
Thanks for any comment

Dear Sir,
I also have this problem on our M9000. And I have set and enabled the SNMP then set and enable SunMC, but the Agent status is still "Enabled,Stopped". Please refer to below information and check what's wrong for me, thanks a lot.
XSCF> setsunmc disable
setsunmc: Agent disabled.
setsunmc: Note that this command will return before SunMC is completely disabled.
XSCF> setsnmp disable
setsnmp: Agent disabled.
XSCF> setsnmp enable
setsnmp: Agent enabled.
XSCF> setsunmc enable
setsunmc: Agent enabled.
setsunmc: Note that this command will return before SunMC is completely enabled.
XSCF> showsnmp
Agent Status: Enabled
Agent Port: 161
System Location:
System Contact:
System Description: SMP HPC of SPARC Enterprise M9000-64
Trap Hosts:
Hostname Port Type Community String Username Auth Protocol
192.168.1.100 162 v2 public n/a n/a
SNMP V1/V2c:
Status: Enabled
Community String: public
Enabled MIB Modules:
SP MIB
FM MIB
XSCF> showsunmc
Agent Status: Enabled, stopped
Setup Status: Set up
SunMC Server: 192.168.1.100
Security Seed: 1211
SNMPv1 Community String: public
Agent Port: 1161
Host Trap Port: 162
Host Event Port: 163
SNMP Agent Port: 161
Domain Agent Port: 8161
Edited by: Yu-Hung on Apr 1, 2008 12:31 AM
Edited by: Yu-Hung on Apr 1, 2008 12:35 AM

Similar Messages

Service Processor on X4100 and 4200

How can I send order from inside solaris 10 to the Service Processor on the X4100 and 4200 ?
We use the serial consol to log messages from the system (helpful for crash or panic), but with the X4100 or 4200 the service processor manage the serial link and we have to do 'login' and start /SP/console to get solaris 10 console.
I would like to automatically start the console from inside solaris if it's not started or to configure the SP in console automatically after a power-on.
Thanks

Thanks, I granted the user with permission sysadmin, but still I am facing the problem.
Let me download SP3 and SP4, if that could solve my problem.
Hello,
Please refer to below blog,See workaround mentioned in below blog.I am quite sure this would be fixed in SP3 or SP4 but first please apply this workaround and then install SP4.
Unable to start SQL server agent
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Question about SMC agent port binding on a system with IP multipathing

Hi All, I hope this is the correct forum
I have recently upgraded a server to from Solaris 8 to Solaris 9 and SMC version 3 to version 3.5 update1 and have been able to configure the agent to bind to the loopback interface.
Originally on the Solaris 8 system with IP multipathing and SMC version 3 we had the following configuration in the domain-config.x file, and when agent was started it would bind to the localhost:
agent = {
snmpPort = "20161"
lsof output:
esd 804 root 10u IPv4 0x30002e233d0 0t0 UDP *:20161 (Idle)
Now since the upgrade of the server and installation of SMC we are seeing that the agent now binds to all the IP address configured on the server, I have tried setting the �agentServer� to localhost or 127.0.0.1 but SMC agent will not start. Also have tried changing/removing the logicalAddressMode setting but with no luck agent still binds to all IP address.
lsof output:
esd 267 root 10u IPv4 0x300073afcb8 0t0 UDP hostname-eri0:20161 (Idle)
esd 267 root 11u IPv4 0x30003d30968 0t0 UDP hostname:20161 (Idle)
esd 267 root 12u IPv4 0x300073364a8 0t0 UDP hostname-eri1:20161 (Idle)
agent = {
agentServer = "hostname"
logicalAddressMode = "ip"
snmpPort = "20161"
I have tried finding documentation on the domain-config.x file but have only found references to existing examples not a document covering all the possible varibles and what they mean.
Thanks for any assistance

I got an idea:
In the Subscriber Profile, in the "messages" section. You can try and add:
- where it says "x" use the actual extension of the the subscriber mailbox + the MWI code. 5555*72
Just to see if it turns it on..... maybe?? Otherwise I don't know if Unity is going to be able to distinguish what is a Cisco phone and what is an Avaya phone. The UTIM is the piece that is supposed to seperate the two systems. But what you are doing is joining them together via the CCM. Which you have working, but MWI is going to be tricky.
This is where the PBXlink would come in handy. You would install this onto the Unity box. Then change your Avaya subscriber from CCM integration to the PBXlink integration. Calls can still come in from CCM, but MWI signals will go out the PBXlink.
If you notice in the Subscriber profile, you can assign subscribers to different Integrations. This plays a huge part in MWI. I think what you are trying is a great stab at it... but I think you may be chasing your tail on this one with the MWI.
On the CallManager side, what happens when you dial an Avaya phone? Do you have a route or translation pattern setup? Because if there was a way to translate this example:
ext 4455 gets a new voicemail
Unity dials 4455 to CCM with MWI on code xxxx
CCM would translate and route this pattern as 4455 *72 to the Avaya switch. Avaya switch should turn on the light.
So basically, CCM is pushing the 4455 through the CAS T1, then add *72 to it as a translation from 4455 xxxx (xxxx being your callmanager MWI on code)
It's a stab in the dark... but that's the only, if it would work I can think off without the PBXlink.
good luck!

Agent and TNSListener service can not run when system starting

The Agent and TNSListener services can not run automaticaly when system startes.If run Agent service by hand in control panel,system prompt 3221356559 error message.If run TNSListener service in control panel,system prompt none.But after refresh,TNSListener service is not running.How can i do next?Thanks very much!

geno.nullfree wrote:
I'm not sure but since it's saying there's a library issue, you could try running:
# ldconfig
Failing that you could try a:
# pacman -Rns slim
# pacman -Syu slim
I tried both "ldconfig" and "pacman -XXX", but the problem is still there.
Maybe I need use another way to recompile slim in my machine.
But I have no time to test it now, I will try it another day.
Thx for replies.

Workflow Agent Listener and Service Components showing Down status

Hi
We are using oracle11i(11.5.10.2) on windows 2000 server
unable to satrt Workflow agent and service component but mail server showing running status
what could be the problem?
with Regards
AUH

Hi Auh;
Please check below and see its helpful:
'Service Component Container is not Running' when Trying to Start Workflow Components [ID 733335.1]
Oracle Workflow Release 12 Diagnostics [ID 469822.1]
11i/R12 - A guide for troubleshoting Workflow Notification Emails - Inbound and Outbound [ID 831982.1]
Cannot start WF Agent Listener - Error "Service Component Container Not Running" [ID 559388.1]
How to Start Workflow Service Component Containers? [ID 436183.1]
Troubleshooting Workflow Agent Listener's failure to start [ID 469009.1]
Regard
Helios

Sun Management Center - how to install the SMC agent on linux

Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?
appreciate your support and cooperation
Best Regards
Hisham

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

Service Processor Issues v20z

Apologies if this question is in the wrong forum, although I believe it is a hardware related issue.
My issue relates to the Service Processor on a v20z. Basically, it seems to reset itself every few minutes and will not retain any information at all, which intern has caused the fans to stay on at 100%, all the time now, which is concerning. Once on it says "Main power off". The SP will then reset itself not long after.
This started when I decided to rebuild one of our V20z servers, as Solaris 10 did not like the raid card when in it's early versions. Anyway, I have successfully installed the latest Solaris 10 build, 1/06 X86 (of course seeing the Athlon cpu's). After this I felt the need to get console working properly, as it was not before. I changed the eeprom as documented with the input and output pointing to the console.
At this point I decided I should get the Service Processor working, as I had not read anything about it previously. I managed to manually assign it an ip address, which it kept. I then had to reboot the server for other reasons, and the SP would not keep its IP details. It will not even obtain one via dhcp, comes up with "Service Error on set IP DHCP".
I have tried updating the bios etc, by manually entering in the information on the lcd screen, however have had to such luck either. I have a funny feeling I have broken something as there does not appear to be anyone with the same type of issues. From everything I have read everyone else seems to have no issues at all. Some advice would be greatly appreciated, as I've been tearing my hair out for a few days now over it.
Many Thanks
Simon

It's ok I figured it out. Embarasingly simple really
eeprom output-device=ttya
eeprom input-device=ttya
This is awesome, just look at this. I'm twenty miles from the server booted in single user mode.
Yes, more sleep time for me less late nights at the office. Sorry if this is old hat to you guys, It's the first time I've seen it on any servers I've owned.
Select (b)oot or (i)nterpreter: b -s
SunOS Release 5.9 Version Generic_117172-17 32-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: bge0.
Hostname: v20z1
INIT: SINGLE USER MODE
Type control-d to proceed with normal startup,
(or give root password for system maintenance):
single-user privilege assigned to /dev/console.
Entering System Maintenance Mode
Jun 22 22:52:10 su: 'su root' succeeded for root on /dev/console
Sun Microsystems Inc. SunOS 5.9 Generic January 2003
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.9.200.10 netmask ffffff00 broadcast 192.9.200.255
ether 0:9:3d:11:c7:c0
Nice one SUN...
Pity I couldn't Install solaris 9 on the v20z's from the CDs in the first place though (I needed to install from an install server).

V20z service processor

Before I call Sun, I thought I'd ask here:
I have a brand new SunFire v20z that I am trying to manage remotely. I had no problem getting the service processor set up and connecting to it, and I was able to access it for several days. It worked fine.
Then I went away for a few days, and when I returned, the SP had very slow response, and randomly started hanging up on me and killing the running command. I thinbk
bash-2.03$ ssh -l spuser 10.0.0.7
spuser@10.0.0.7's password:
Sun Microsystems
IPMI v1.5 Service Processor
Version: V2.0.0.48
localhost $ help
help: not found
localhost $ platform help<br />Killed<br />localhost $ sp help
Connection to 10.0.0.7 closed.
What made the SP so sick? Any ideas? TIA
Jeremiah

I had this on a V20z. It seemed to start intermittently a few days ago but this evening it was doing it consistently. It was doing it when trying to use SP commands 'platform console' and 'sp get events', though 'sp reboot' did work and thankfully seems to have cleared the problem.
The SP reboot was necessary as a last resort because I had some planned work to do in an agreed outage and needed to boot the server a few times, so needed proper console access, i.e. I needed to sort out the SP problem to allow console access which we reach via the SP.

ODI Agent as Windows services

Hi,
I am trying to create ODI 11.1.1.6 agent as windows services ( followed jhon blog ) but getting fail with below errors.
Configured ohs opmn of Hyperion 11.1.2.1.
(I am able to configure in 11.1.1.5 but i hope there is no difference in 11.1.1.6 of ODI)
ODI-1604: Unable to parse Opmns Snippet Xml
ODI-1600: Unable to update Opmn Xml file.java.io.FileNotFoundException: C:\Oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\bin\Oracle_Ho
me Directory\oracledi\agent\bin\odi_opmn_standaloneagent_template.xml (The system cannot find the path specified)
ODI-1600: Unable to update Opmn Xml file.java.lang.NullPointerException
opmnctl reload: reconfiguring opmn...
Here are updates in files
agentcreate.property
ORACLE_ODI_HOME=Oracle_Home Directory
INSTANCE_HOME=INSTANCE_HOME Directory
COMPONENT_TYPE=odiagent
COMPONENT_NAME=ODIAGENT
ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
ODI_MASTER_URL=jdbc:oracle:thin:@xyz.abc.com:1521:DEV
ODI_MASTER_USER=ODI_Repo
ODI_MASTER_ENCODED_PASS=e3yHXTyLvogAGJYiddyU4ZVg
ODI_SECU_WORK_REPO=WORKREP
ODI_SUPERVISOR_ENCODED_PASS=d,yHvBA9Vb79z3f4w86cnZ0Fa
PORTNO=20910
JAVA_HOME=C:/Progra~1/Java/jdk1.6.0_33
ORACLE_OPMN_HOME=D:/Oracle/Middleware/Oracle_WT1
JMXPORTNO=21910
odi_opmn_addagent.bat
if "%ODI_HOME%" == "" set ODI_HOME=C:\Oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent
REM call "%ODI_HOME%\bin\odiparams.bat"
if "%OPMN_HOME%" == "" set OPMN_HOME=D:\Oracle\Middleware\Oracle_WT1
if "%INSTANCE_HOME%" == "" set INSTANCE_HOME=D:\Oracle\Middleware\Oracle_WT1\instances\instance1
REM set CLASSPATH=%ODI_CLASSPATH%;%OPMN_HOME%\opmn\lib\opmneditor.jar
set CLASSPATH=%ODI_HOME%\lib\odi-standalone-agent.jar;%OPMN_HOME%\opmn\lib\opmneditor.jar;%ODI_HOME%\..\..\setup\manual\oracledi-sdk\oracle.odi-sdk-jse_11.1.1.jar
java -classpath %CLASSPATH% oracle.odi.AddAgentToOpmn %*

I tried it today, it works well, generally the issue is caused home not set correctly.
on window platform, for all pathes please use / not \
odi_opmn_addagent.bat
if "%ODI_HOME%" == "" set ODI_HOME=..
REM call "%ODI_HOME%\bin\odiparams.bat"
if "%OPMN_HOME%" == "" set OPMN_HOME=C:/Oracle/Middleware/Oracle_WT1
if "%INSTANCE_HOME%" == "" set INSTANCE_HOME=C:/Oracle/Middleware/Oracle_WT1/instances/instance2
agentcreate.properties
# Use / as path seperator to specify path in Unix as well as Windows.
ORACLE_ODI_HOME=C:/Oracle/Middleware/Oracle_ODI1
INSTANCE_HOME=C:/Oracle/Middleware/Oracle_WT1/instances/instance2
COMPONENT_TYPE=odiagent
COMPONENT_NAME=myagent
ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
ODI_MASTER_URL=jdbc:oracle:thin:@jjpeng-lab10.us.oracle.com:1521:oditest01
ODI_MASTER_USER=jini_01pfx
ODI_MASTER_ENCODED_PASS=hpfX,Dc,hJLYSgD.m,LnNr9zf
ODI_SECU_WORK_REPO=JINI_01PFX_WORK
ODI_SUPERVISOR_ENCODED_PASS=hpfX,Dc,hJLYSgD.m,LnNr9zf
PORTNO=9787
JAVA_HOME=C:/java_64bit/jdk1.6.0_29
ORACLE_OPMN_HOME=C:/Oracle/Middleware/Oracle_WT1
JMXPORTNO=21910
PROXY_PORT=98767
MASTER_REPO_EXTERNAL_ID=1329894428167

ODI Agent as a Service

Hello All ,
We have ODI 11.1.1.6 and we have created a standalone agent called localagent . We want to run this localagent as a windows service .
NOTE: IN <%ODI_home %>/agent/bin folder we haven't see any agentservice.bat
Can you please suggest me how to make a ODI standalone agent as a windows service ?
Thanks & regards
Keny Alex

839100 wrote:
Hello All ,
We have ODI 11.1.1.6 and we have created a standalone agent called localagent . We want to run this localagent as a windows service .
NOTE: IN <%ODI_home %>/agent/bin folder we haven't see any agentservice.bat
Can you please suggest me how to make a ODI standalone agent as a windows service ?
ODI 11g does not have any feature to run agent as windows service.
There is only one Agent “mode” in ODI 11g, which is similar to the SchedulerAgent in ODI 10g .
ODI11g relies on OPMN to run agents as “services”
The odi_opmn_addagent.bat and odi_opmn_deleteagent.bat should help to declare the agent to OPMN
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_opmn/odi_opmn.htm
Thanks,
Sutirtha

HELP! SUNFIRE x2100 M2 server service processor problem,,,,,

i got a problem with my x2100m2 server,
the service processor doesn't seem to start
at all, even if at standy power.
the OK led in the front panel doesn't seem
to flash.
wats the possible problems with my server??

try to remove power cables wait around 3 minutes plug it again you should have output if no try to power on the server
are you connecting to serial mgt make sure u r having the right config for serial conx . 9600 8 N 1
Edited by: yishak on Mar 2, 2009 2:28 AM

Scheduler Agent Installed as Service Encrypted Password Change

All,
We have a Scheduler Agent installed as a service in Windows Server 2003, SP2. We want to change the password of the Master Repository. When I change the ODI_SECU_ENCODED_PASS in the odiparams.bat file it doesn't reflect this change in the service. I tried looking around in the snpsagent.conf wrapper file to see if the password is stored anywhere but dont' see it. I see it references a file called snpparams.bat, unfortunately I cannot find this file on our machine. If anyone knows how to get the new password to take effect without having to drop the agent and recreate it, thus losing all schedules that we've created, I would greatly appreciate the help.
Thanks in Advance,
Josh

Hi Josh,
the snpparamens.bat is exactly the same of odiparameter.bat. It had this name when the software was Sunopsis (SNP). Probably you saw the reference at some old document...
If you drop the service nothing will be loose, just recreate it to get the new parameters. The scheduling list is stored, as everything in the ODI, at the repository, it means that all scheduling orders are at tables. Because of that you need to made a "update scheduler" when create a new scheduling.
If you are still afraid, just create a new agent at another port (as service) and change the logical agent to it. Update the scheduller list an take a look if everthing is OK.
After that you can drop the old service.
Does it make any sense to you?

Agent Determination for Service Entry (BO-BUS2091)

HI,
I am new to workflow and facing below issue.
I have created a workflow for Service entry sheet approval (BO- BUS2901) and I am having an issue with the agent determination. I am using my own Ztable to determine the possible agents.
I am using the following code in the FM of the rule I created for determining the agent:
FUNCTION ZME_SRV_REL_GET_RESPONSIBLE.
*"*"Local Interface:
*" TABLES
*"      ACTOR_TAB STRUCTURE SWHACTOR
*"      AC_CONTAINER STRUCTURE SWCONT
*" EXCEPTIONS
*"      NOBODY_FOUND
INCLUDE <cntain>.
TABLES: essr_rel, essr,zmm_service_mail.
DATA: object TYPE swc_object.
DATA: BEGIN OF essrkey,
lblni LIKE essr-lblni,
END OF essrkey.
DATA: verak_user TYPE csks-verak_user.
REFRESH actor_tab.
CLEAR actor_tab.
swc_get_element ac_container 'service' object.
if sy-subrc eq space.
essrkey-lblni = object-objkey(10).
select single * from essr where lblni = essrkey-lblni.
select single * from zmm_service_mail
where frggr = essr-frggr
and frgsx = essr-frgsx.
if essr-frgzu eq ' '.
verak_user = zmm_service_mail-pernr1.
elseif essr-frgzu eq 'x'.
verak_user = zmm_service_mail-pernr2.
endif.
actor_tab-otype = 'us'.
actor_tab-objid = verak_user.
append actor_tab.
endif.
ENDFUNCTION.
When I debug, sy-subrc = 8 at swc_get_element ac_container 'service' object.
What could be the problem?
Note- I have gone thru below thread but still I am unable to find the error.
http://scn.sap.com/thread/2017416

Hi,
You should re-read the thread that you quoted above. The mighty Sue Keohan suggested a solution.
Instead of trying to pass a service *object*, and then extracting the key, you can just pass the key itself. It has type EESSR-LBLN1.
swc_get_element ac_container 'service_key' lv_service_key.
if sy-subrc eq 0.
essrkey-lblni = lv_service_key.
(etc)
cheers
Paul

Agent Determination for Service Entry

Hi Guys,
I created a workflow based on BO BUS2901 to send approval notification to an approver and I am having an issue with the agent determination. I am using the cost centre owner from the PR associated with the PO for the service entry as the approver.
I am using the following code in the FM of the rule I created for determining the agent:
FUNCTION ZME_REL_GET_RESPONSIBLE.
*"*"Local Interface:
*" TABLES
*"      ACTOR_TAB STRUCTURE SWHACTOR
*"      AC_CONTAINER STRUCTURE SWCONT
*" EXCEPTIONS
*"      NOBODY_FOUND
INCLUDE <cntain>.
TABLES: eban, essr_rel, essr, ekpo, ebkn, csks.
DATA: object TYPE swc_object.
DATA: BEGIN OF essrkey,
           lblni LIKE essr-lblni,
           ebeln LIKE essr-ebeln,
        END OF essrkey.
DATA: verak_user TYPE csks-verak_user, kostl TYPE ebkn-kostl.
REFRESH actor_tab.
CLEAR actor_tab.
swc_get_element ac_container 'ServiceEntry' object.
IF sy-subrc EQ space.
    essrkey-lblni = object-objkey(10).
    essrkey-ebeln = object-objkey+10(10).
      select * from ekpo where ebeln = essrkey-ebeln.
        select single * from ebkn where banfn = ekpo-banfn.
          kostl = ebkn-kostl.
      endselect.
    select * from csks where kostl = kostl.
      verak_user = csks-verak_user.
    endselect.
    actor_tab-otype = 'US'.
    actor_tab-objid = verak_user.
    APPEND actor_tab.
endif.
ENDFUNCTION.
When I debug, sy-subrc = 8 at swc_get_element ac_container 'ServiceEntry' object.
What could be the problem?
Thanks
Regards

Hi Sarvesh, T
This thread was already answered some time ago. Please open a new Discussion marked as a question. If the thread you originally posted to has material related to your question, include a link. Your content is attached below to make it easy for you to simply paste it into the new Discussion. It is recommended to read the Rules of Engagement and other documents in the Getting Started link at the top right.   If you have any questions, feel free to respond to this DM (Direct Message) and I will be happy to try to assist.
Rgds,
Jocelyn (SCN moderator)

Why SCOM 2012 R2 Agent version for Service Manager servers is 6.1.7221.49, why not 7.1.10184.

Hi ,
In SCOM 2012 R2 console if i look at all of my agent managed servers have agent builds of 7.1.10184 but my two service manager servers have agent builds of 6.1.7221.49
Can anyone let me know is this known issue or how can we upgrade the agent to correct version.
Thanks in advance
Bharath

Hi,
SCOM and SCSM are built on the same structure, Management Servers and DAta Warehouse etc. This means that when you install the SCSM Management Server, the Microsoft Monitoring Agent is also installed. When
you want to monitor Service Manager and the server it´s installed on, you need to configure the SCOM parameters from the control panel at the SCSM management server.
If you were to try and install the SCOM agent at the SCSM server, it would fail and tell you that you can´t install the agent on a server where Service Manager is installed. The agent will be upgraded when
you upgrade Service Manager so this is all expected and It´s as it should be :)
Regards,
Daniel
IT Consultant at Viridis IT

SMC agent on M9000 service processor

Similar Messages

Maybe you are looking for