SMC fan update does not apply

As some of you know apple released a SMC fan update to overcome the issues experienced with overworking processors.
I assumed it was doing something to overcome the BSOD which generally happens to me when I am playing WOW from as cold start.
Just for you information, this update does not apply to our models and as of yet still nothing coming.
I will be talking to a Mac person this afternoon.
Just wondering if people are still experiencing the BSOD on the 'better' NVIDIA cards.

2011-06-13 11:25:29.289 PatcherApplication[1249:e07] Verifying from caps:2011-06-13 11:25:29.289 PatcherApplication[1249:e07] Version does not match.
In English: You already have patched another Adobe product that uses an external shared library e.g. for Bridge or PDF handling an it has locked the installer database because an older version is not allowed to overwrite a newer version. Short of completely uninstalling everything, deletzing caps.db and then re-installing in correct order there is no way to resolve this, so if there is nothing crucial going on that would make the patch something to die for, simply leave everything as is...
Mylenium

Similar Messages

  • TS Licensing hotfix 983385 - "this update does not apply to your system"

    So my license server has been deactivated, per http://blogs.msdn.com/b/rds/archive/2010/03/30/event-17-certificate-corruption-on-terminal-services-remote-desktop-license-servers.aspx.
    This KB article:  http://support.microsoft.com/kb/983385 says there's a hotfix for this issue, with the following prerequisites:
    To apply this hotfix, you must be running one of the following operating systems:
    Windows Server 2003 Service Pack 2 (SP2)
    Windows Server 2008
    Windows Server 2008 Service Pack 2 (SP2)
    Windows Server 2008 R2
    Ok, fine.  I'm running Server 2008 SP2.  Click the hotfix link and there's no non-R2 hotfix listed.  Download the R2 hotfix, thinking maybe it was labeled incorrectly, but it won't work.  Sure would be nice if I could get a hotfix for
    my operating system.  What gives?

    Oh, ok.  Read way down in the fine print, and it says: 
    Important Windows Vista hotfixes and Windows Server 2008 hotfixes are included in the same packages. However, only "Windows Vista" is listed on the Hotfix Request page. To request the hotfix package that applies to one or both operating
    systems, select the hotfix that is listed under "Windows Vista" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
    Brilliant.  Does this actually make sense to anyone in the universe?  SERENITY NOW!

  • Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"

    Hi,
    A general question about hot fix installs.
    I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a bulk install during a release cycle ( a couple times a year). I just realized that NO HF's have installed since JUNE 2014. Every HF that shows up in WindowsServer2012R2 directory fail to install with a message of "The update is not applicable to your computer". Which is fine if that was true, but.... I get this message for every HF from the ISO's since June 2014. NOT one HF thinks it is applicable to my computer. Could that be the case? No HF's apply to my Server 2012 systems since June of 2014?
    This is my system info, and below that is the results from attempting to install 95 HF's.
    C:\TEMP>systeminfo
    Host Name: MYHOST
    OS Name: Microsoft Windows Server 2012 R2 Datacenter
    OS Version: 6.3.9600 N/A Build 9600
    OS Manufacturer: Microsoft Corporation
    OS Configuration: Member Server
    OS Build Type: Multiprocessor Free
    Registered Owner: Windows User
    Registered Organization:
    Product ID: 00252-80025-36226-AA727
    Original Install Date: 6/13/2014, 8:04:39 AM
    System Boot Time: 3/16/2015, 2:34:45 PM
    System Manufacturer: Dell Inc.
    System Model: PowerEdge R720
    System Type: x64-based PC
    Processor(s): 2 Processor(s) Installed.
    [01]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
    el ~2500 Mhz
    [02]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
    el ~2500 Mhz
    BIOS Version: Dell Inc. 2.2.2, 1/16/2014
    Windows Directory: C:\Windows
    System Directory: C:\Windows\system32
    Boot Device: \Device\HarddiskVolume1
    System Locale: en-us;English (United States)
    Input Locale: en-us;English (United States)
    Time Zone: (UTC-07:00) Mountain Time (US & Canada)
    Total Physical Memory: 262,099 MB
    Available Physical Memory: 249,337 MB
    Virtual Memory: Max Size: 301,011 MB
    Virtual Memory: Available: 288,015 MB
    Virtual Memory: In Use: 12,996 MB
    Page File Location(s): C:\pagefile.sys
    Domain: mydomain.sgn
    Logon Server: \\MYHOST
    Hotfix(s): 25 Hotfix(s) Installed.
    [01]: KB2862152
    [02]: KB2868626
    [03]: KB2876331
    [04]: KB2888505
    [05]: KB2892074
    [06]: KB2893294
    [07]: KB2893984
    [08]: KB2898785
    [09]: KB2898868
    [10]: KB2898871
    [11]: KB2900986
    [12]: KB2901125
    [13]: KB2901128
    [14]: KB2909210
    [15]: KB2909921
    [16]: KB2912390
    [17]: KB2916036
    [18]: KB2919442
    [19]: KB2922229
    [20]: KB2923392
    [21]: KB2925418
    [22]: KB2930275
    [23]: KB2931358
    [24]: KB2931366
    [25]: KB2936068
    Network Card(s): 6 NIC(s) Installed.
    [01]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
    D Client)
    Connection Name: ISCSI
    DHCP Enabled: No
    IP address(es)
    [01]: 192.168.1.30
    [02]: fe80::38c9:e59c:5ac2:e0a1
    [02]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
    Client)
    Connection Name: NIC3
    Status: Hardware not present
    [03]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
    Client)
    Connection Name: MGMT
    DHCP Enabled: No
    IP address(es)
    [01]: 7.48.64.32
    [02]: 7.48.64.30
    [03]: fe80::f14e:9339:9326:c7fd
    [04]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
    D Client)
    Connection Name: SLOT 5 Port 1_swport_VMRepwan
    DHCP Enabled: Yes
    DHCP Server: N/A
    IP address(es)
    [05]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
    D Client)
    Connection Name: NIC2
    Status: Hardware not present
    [06]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
    D Client)
    Connection Name: SLOT 5 Port 2_swport_VMOpswan
    DHCP Enabled: Yes
    DHCP Server: N/A
    IP address(es)
    Hyper-V Requirements: A hypervisor has been detected. Features required for
    Hyper-V will not be displayed.
    I have a script that runs each HF install.. If I run them manually without the tool I get the same results so it is not the script..
    Installing 95 patches
    for Microsoft Windows Server 2012 R2 Datacenter x64
    Repository path: U:\Patch Repository_4_1\2012_R2_HFs\
    1. Windows8.1-KB2894852-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    2. Windows8.1-KB2894856-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    3. Windows8.1-KB2920189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    4. Windows8.1-KB2926765-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    5. Windows8.1-KB2928120-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    6. Windows8.1-KB2931358-x64.msu patch status: ALREADY INSTALLED - SKIPPING
    7. Windows8.1-KB2931366-x64.msu patch status: ALREADY INSTALLED - SKIPPING
    8. Windows8.1-KB2933826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    9. Windows8.1-KB2939576-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    10. Windows8.1-KB2953522-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    11. Windows8.1-KB2957151-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    12. Windows8.1-KB2957189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    13. Windows8.1-KB2957689-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    14. Windows8.1-KB2961072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    15. Windows8.1-KB2961887-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    16. Windows8.1-KB2962872-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    17. Windows8.1-KB2964718-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    18. Windows8.1-KB2964736-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    19. Windows8.1-KB2965788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    20. Windows8.1-KB2966072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    21. Windows8.1-KB2966826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    22. Windows8.1-KB2966828-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    23. Windows8.1-KB2971850-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    24. Windows8.1-KB2972213-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    25. Windows8.1-KB2972280-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    26. Windows8.1-KB2973114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    27. Windows8.1-KB2973201-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    28. Windows8.1-KB2973351-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    29. Windows8.1-KB2974008-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    30. Windows8.1-KB2976627-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    31. Windows8.1-KB2976897-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    32. Windows8.1-KB2977292-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    33. Windows8.1-KB2977629-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    34. Windows8.1-KB2978668-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    35. Windows8.1-KB2982794-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    36. Windows8.1-KB2982998-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    37. Windows8.1-KB2987107-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    38. Windows8.1-KB2987114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    39. Windows8.1-KB2988948-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    40. Windows8.1-KB2992611-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    41. Windows8.1-KB2993651-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    42. Windows8.1-KB2993958-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    43. Windows8.1-KB3000061-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    44. Windows8.1-KB3000483-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    45. Windows8.1-KB3000869-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    46. Windows8.1-KB3001237-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    47. Windows8.1-KB3002657-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    48. Windows8.1-KB3002885-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    49. Windows8.1-KB3003057-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    50. Windows8.1-KB3003381-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    51. Windows8.1-KB3003743-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    52. Windows8.1-KB3004150-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    53. Windows8.1-KB3004361-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    54. Windows8.1-KB3004365-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    55. Windows8.1-KB3005607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    56. Windows8.1-KB3006226-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    57. Windows8.1-KB3008923-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    58. Windows8.1-KB3008925-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    59. Windows8.1-KB3010788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    60. Windows8.1-KB3011780-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    61. Windows8.1-KB3013126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    62. Windows8.1-KB3013455-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    63. Windows8.1-KB3014029-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    64. Windows8.1-KB3018943-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    65. Windows8.1-KB3019215-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    66. Windows8.1-KB3019978-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    67. Windows8.1-KB3020393-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    68. Windows8.1-KB3021674-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    69. Windows8.1-KB3021952-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    70. Windows8.1-KB3023607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    71. Windows8.1-KB3036197-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    72. Windows8.1-KB3021953-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    73. Windows8.1-KB3022777-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    74. Windows8.1-KB3023266-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    75. Windows8.1-KB3023562-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    76. Windows8.1-KB3024663-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    77. Windows8.1-KB3029944-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    78. Windows8.1-KB3030377-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    79. Windows8.1-KB3031432-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    80. Windows8.1-KB3032323-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    81. Windows8.1-KB3032359-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    82. Windows8.1-KB3040335-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    83. Windows8.1-KB3033408-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    84. Windows8.1-KB3033889-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    85. Windows8.1-KB3034196-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    86. Windows8.1-KB3034344-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    87. Windows8.1-KB3035017-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    88. Windows8.1-KB3035034-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    89. Windows8.1-KB3035126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    90. Windows8.1-KB3035131-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    91. Windows8.1-KB3035132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    92. Windows8.1-KB3037634-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    93. Windows8.1-KB3039066-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    94. Windows8.1-KB3044132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    95. Windows8.1-KB3046049-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    Thanks,
    Dave
    

    Hi Dave,
    Would you please check CBS lg file and other relevant event logs if find more clues? On current situation, please refer to following article and check if can help you.
    Update is not applicable to your computer- but it is
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Droid X2 2.3.4 OTA update does NOT install on my phone

    Hello,
    Today, when I checked for software updates in the settings page of my Motorola Droid X2, it said the 1.3.380.en.US is ready to be applied. I downloaded it and clicked on install once download finished.
    The phone reboots, shows the logo and the progress bar for installing the update and then shows an exclamatory mark. The progress bar also stops. Then the stupid phone reboots and when I unlock it, it says the update has failed.
    This is unacceptable from a smartphone and I am already **bleep**. Firstly, the phone has 10's of issues (music stutters, etc.) and many people complained about it. And Motorola releases this update that is supposed to fix those issues. And now, the update does NOT even install. Why? Please let me know what I am doing wrong. Or is anyone else facing this issue? Do I have a bad phone and should I replace it?
    Please help!
    A very very frustrated Droid X2 owner.

    I can't speak specifically to the DX2, as I have the original DX ... I assume you've tried a Battery Pull ??  Just power it down, remove the battery and leave it out for like 1 minute - reinsert & power up. See if it proceeds with the update ... if not, you'll likely have to do the factory Reset.  If you have data on your SD Card that you want to preserve make sure you don't select "Format SD Card" -- or just remove it entirely before starting the F.R. process.
    If you take it to Verizon or call them, they will likely walk you through, or do, the factory Reset anyway .. And since you seem to have "10's" of issues, this might be the best path for you to take anyway ...  and in fact if it were ME, I would just bite the bullet, allow the Format of the SD Card, and be done with it ..  Of course you'll have to re-download all of your FREE apps after doing so.  And if you can't get the phone to boot up, that in itself can be a challenge because Market won't know about them after you do the F.R. 
    So if you decide to do that, I would go ONLINE to MARKET and write down a list of all your Free Apps before starting the process.
    Good luck ..
    http://community.vzw.com/t5/DROID-X-by-Motorola/Factory-reset-the-what-why-and-how-for-Gingerbread/m-p/544836#M24742

  • AdbeRdrUpd1001_Tier1.msp Update Does Not Install using Nullsoft

    Hello,
    I am attempting to use the Nullsoft Scriptable Install system to install the Adobe® Reader® 10.0.1 update on Windows XP SP3.  I determined that the Adobe update will install as expected when I run the msp on a console command line with the following arguments:
    C:\temp\> AdbeRdrUpd1001_Tier1.msp /passive /norestart
    However, when I put the same exact command into Nullsoft script, the update does not get applied.  I have a theory that the Tier1 update needs to determine language information from Windows XP and because the Nullsoft script executes in a Windows environment that is not fully initialized, the language information is not available and the update fails.  If you can expand on this or provide any insight please respond to this message.  Any help with this question would be greatly appreciated.
    Thanks, Jeff

    you could start by uninstalling the HP Update program from Add/Remove Programs.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Updated package not applies on RDS

    the situation:
    1. updated package was published and enabled for AD global group. No issues. The app was updated on global refresh (1hour) or on logon as it should be
    2. the same published package was enabled for RDSH.
    The updated package folder does appear in PrData\Appv\PACAGE_ID with previous package ID folder
    get-appvclientpackage shows just one package v.0001
    get-appvclientpackage -all shows just both packages v.0001 and v.0002
    (see below powershell output and screenshot)
    Sure in this situation the updated package does not apply...
    What could be done?
    Thx.
    PS C:\Windows\system32> get-appvclientpackage -all
    PackageId            : 40807a65-0cea-4e40-bdcf-7f7cb4787bc5
    VersionId            : ad2f6e12-b161-42fd-8c45-4b954fa0ba34
    Name                 : my_app 5.4.0 v00
    Version              : 0.0.0.2
    Path                 :
    \\00VAPPVPUB-01\Content\my_app 5.4 v.00 21 Jan
                           2015\my_app 5.4.0 v00_2.appv
    IsPublishedToUser    : False
    UserPending          : False
    IsPublishedGlobally  : False
    GlobalPending        : False
    InUse                : False
    InUseByCurrentUser   : False
    PackageSize          : 289720664
    PercentLoaded        : 100
    IsLoading            : False
    HasAssetIntelligence : True
    PackageId            : 40807a65-0cea-4e40-bdcf-7f7cb4787bc5
    VersionId            : 7cd93749-8ea9-4498-92a5-6142371e5d28
    Name                 : my_app 5.4.0 v00
    Version              : 0.0.0.1
    Path                 :
    \\00VAPPVPUB-01\Content\my_app 5.4.0 v.00 13 jan
                           2015\my_app 5.4.0 v00.appv
    IsPublishedToUser    : False
    UserPending          : False
    IsPublishedGlobally  : True
    GlobalPending        : False
    InUse                : True
    InUseByCurrentUser   : False
    PackageSize          : 229408841
    PercentLoaded        : 100
    IsLoading            : False
    HasAssetIntelligence : True
    PS C:\Windows\system32> get-appvclientpackage
    PackageId            : 40807a65-0cea-4e40-bdcf-7f7cb4787bc5
    VersionId            : 7cd93749-8ea9-4498-92a5-6142371e5d28
    Name                 : my_app 5.4.0 v00
    Version              : 0.0.0.1
    Path                 :
    \\00VAPPVPUB-01\Content\my_app 5.4.0 v.00 13 jan
                           2015\my_app 5.4.0 v00.appv
    IsPublishedToUser    : False
    UserPending          : False
    IsPublishedGlobally  : True
    GlobalPending        : False
    InUse                : True
    InUseByCurrentUser   : False
    PackageSize          : 229408841
    PercentLoaded        : 100
    IsLoading            : False
    HasAssetIntelligence : True
    PS C:\Windows\system32>
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

    PackageId            : 40807a65-0cea-4e40-bdcf-7f7cb4787bc5
    VersionId            : 7cd93749-8ea9-4498-92a5-6142371e5d28
    Name                 : my_app 5.4.0 v00
    Version              : 0.0.0.1
    Path                 :
    \\00VAPPVPUB-01\Content\my_app 5.4.0 v.00 13 jan
                           2015\my_app 5.4.0 v00.appv
    IsPublishedToUser    : False
    UserPending          : False
    IsPublishedGlobally  : True
    GlobalPending        : False
    InUse                : True
    InUseByCurrentUser   : False
    It can't apply version 0.0.0.2 because 0.0.0.1 is in use (InUse = TRUE). If you don't have the app open then it may be still locking a file. Check that there are no other users logged into that machine and check to see if there are any executables related to
    "my_app 5.4.0 v00" that are running. 

  • Windows update does not work after using System recovery disk

    I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
    Solved!
    Go to Solution.

    I get errors saying A problem is preventing the troubleshooter from starting.
    That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
       Trouble with reinstall of Win7 64 on a L505-ES5018
    The fix was to install a new hard disk driver.
       Intel Rapid Storage Technology
    -Jerry

  • HT4623 When i click on general settings, the software update does not seem to come up? It wont let me download any apps.

    When i click on general settings, the software update does not seem to come up? It wont let me download any apps.
    I Want to download i0s 5
    i have ipod touch 3rd gen

    You need to connect your iPod to iTunes on a computer and update from there.
    Before updating, I recommend that you create a backup first, using : http://support.apple.com/kb/ht1766
    Please note that iPod 3d generation only goes up to iOS 5.1.1
    To update the iPod, use: http://support.apple.com/kb/ht4623
    scroll down to the part that's about updating with iTunes.
    Good luck
    Stijn
    Message was edited by: jesterwylde

  • "The updater does not have a firmware image"

    My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.

    Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.

  • MBean Attribute (Does not apply to application modules)

    Can any one tell what this mean ?
    MBean Attribute (Does not apply to application modules) :
    is this means that it wont help for datasources for any J2EE application ????
    Inactive Connection Timeout     
    The number of inactive seconds on a reserved connection before WebLogic Server reclaims the connection and releases it back into the connection pool.
    You can use the Inactive Connection Timeout feature to reclaim leaked connections - connections that were not explicitly closed by the application. Note that this feature is not intended to be used in place of properly closing connections.
    When set to 0, the feature is disabled.
    MBean Attribute (Does not apply to application modules) :
    JDBCConnectionPoolParamsBean.InactiveConnectionTimeoutSeconds
    Minimum value: 0
    Maximum value: 2147483647

    Yes!, they do not apply for any applications they are management interfaces, internal to weblogic.
    Below is the brief information about it:
    A managed bean (MBean) is a Java bean that provides a Java Management Extensions (JMX) interface. JMX is the J2EE solution for monitoring and managing resources on a network.
    BEA WebLogic Server provides a set of MBeans that you can use to configure, monitor, and manage WebLogic Server resources through JMX. This reference document organizes WebLogic Server MBeans into the following categories:
    MBeanServer Services, which serve as your entry point into navigating the MBean hierarchies. Some of these MBeans contain attributes and operations for managing changes to WebLogic Server configuration MBeans.
    Configuration MBeans, which expose attributes and operations for configuring WebLogic Server resources.
    Runtime MBeans, which provide information about the runtime state of its resources.
    New MBeans, which have been added in the current release of WebLogic Server. These new MBeans are also listed in other categories in this document (for example, new runtime MBeans are also listed under the Runtime MBeans category).
    Deprecated MBeans, which are deprecated in the current release of WebLogic Server.

  • How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

    How do I download IOS5 onto a first generation ipad?  Software Update does not appear under General in Settings on the first generation ipad.

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

    I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

    There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

  • Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840)

    Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840) but instead only a Intel HD 4600. How do I ensure that PS is using the full phardware power of my notebook. My OS is WIN 8.1 Thanks for your help, Meik

    In the end it was the NVIDIA software - excluding PS as application for support by high performance graphic processor to save energy - activated NVIDIA card use for PS & LR all fine now.

  • Clicking a Paragraph Style Does Not Apply Style to Text

    I just switched from a PC to a brand new MacBook Pro (OSX Lion 10.7), and I bought InDesign CS5.5. I have been using CS4 on a PC for a couple of years and had no issues. For some reason, I cannot apply Paragraph Styles by placing my cursor in the text and clicking the Paragraph style. It highlights the clicked style for a moment, and then de-highlights all the styles, but does not apply any changes. The only way I can apply a Paragraph Style right now is by right clicking the style and selecting "Apply..." from the drop down menu. It's very puzzling. I was wondering if anyone had any experience with this. I also have Microsoft Office: Mac 2011 installed on the laptop if that makes a difference to anyone. Any help would be greatly appreciated, since I typeset and edit for my living, and this problem is slowing me down a bit.

    Neither. Let's say I click into a paragraph. The current style will be highlighted. If I click on another style (or even attempt to re-apply the same style by clicking on it in the styles pane), it momentarily highlights the new style, then flashes a little bar underneath (like the one that shows up if I were to try to re-organize the styles list by dragging a style to a different pace in the styles list), then all the styles become unselected, but no changes have been applied to the paragraph in question. Very definitely not normal. It is almost as if the pane assumes that I am attempting to drag the style even when I am merely clicking on it. Very weird.

  • The Fan option does not appear for folders in the dock.

    The fan option does not appear on folders on the Dock. Stack option is checked, but all I get is grid list and automatic....running 10.5.2
    any ideas?

    Not that I know of. When on the side no fan for folders and no 3D look, which I prefer. Background of the Dock very dark so the white dot showing an app is open is easy to see and it all looks very sophisticated.
    You might check with third party apps to see if anyone is changing that, but most people don't like the fan so I doubt if anyone is working to add it in.

Maybe you are looking for