SMC Firmware 1.1 problems?

I recently updated to SMC firmware update 1.1 and as soon as I rebooted the temperature of my cores jumped from 38c for core 1 and 39c for core 2 to 50c each. Both the temperature monitor widget and application say the same thing. Is this a problem with the apps or the firmware itself? I know 50c is not that hot but I was more comfortable with 38 and 39.
MacBook 1.833 Core Duo   Mac OS X (10.4.8)  

bronyruar,
my MacBook used to run at 68 or so when I first bought it. After the first firmware update, it went down to the low 50s. Then, possibly due to some other update I started getting readings of 20-22C! (Which is pretty improbable) I kinda gave up on the temp readings after that.
I just updated as well, and now iStatpro shows me at 45C, which seems plausible.

Similar Messages

  • Latest SMC Firmware update causing problems?

    Hello,
      recently, I've attempted to install the update: MacBook Pro SMC Firmware V 1.7 and had issues booting up my system afterwards. I thought I ran my RAM down to its skivvies and it was rebelling, but it seems to work fine after repairing the disk drive using Disk Utility, because the first time it happened my Mac wouldn't open things as fast as it usually did, taking about 10-15 minutes to get to the login screen, and then some to get back into the desktop. After shutting it down and rebooting it wouldn't get past the Apple loading screen after the tone. Even with repairing the drive after installing the update, it wouldn't load past the tone and the Apple loading screen, so I restored the system from an external hard drive. This seemed to do the trick and allows me to do everything I used to do prior these problems, and the second time I tried to update the SMC V 1.7 it caused the same problem.
    I wondered if anyone else was having these problems with their Macs in regards to the SMC, and maybe it isn't just the SMC but other parts of the MacBook that have problems. Specifically, the Mac I'm using is the 2011 MacBook Pro6,2 2.66 GHz Intel Core i7 with Snow Leopard version 10.6.8. The SMC that I have currently is the 1.58f16 .
    Then again perhaps my disk drive and other components are stating their wish to retire. I've used it pretty hard over the past year.
    Thanks for reading,
    Dracien

    Not on my Late 2011 15". But others have had some problems.

  • SMC Firmware update NOT compatible with Adobe Version Cue

    After 2 days of SMC Firmware install & reboot problems (and many other folks in this forum), I went to my Apple Store Genius who resolved the issue by turning off Adobe Version Cue at startup.
    It is now a know problem at Apple.

    Now it seems logical that if OSX can boot in Safe Mode it's probably a StartUp program conflict ... and NON-universal programs are likely culprits according to the Apple Genius.

  • Having problems with SMC Firmware Update 1.8

    I installed the MacBook Pro SMC Firmware Update 1.8 yesterday and have since experienced a number of problems. I am running a 15 inch, Mid 2012 MacBook Pro, btw. First, after the intial install the sytem would not reboot. I had to do a physical reset of the SMC controller to get the system to power on again (sft-cntl-option-power key sequence). Once the system rebooted, the fan in stuck on high and the battery meter in the controll bar does not show status, just displaying an "X" in the battery.  I went into the Software Update utility and the SMC update is still listed as available, I tried reinstalling it, and the situation has not changed. The fan noice is annoying and I'm aftraid to disconnect the laptop from the AC adapter. Please advise.
    -cp

    Firmware updates don't affect to Windows and OS X. The firmware makes your hardware work, not the operating system, so you won't have any problem doing this

  • Problem about SMC Firmware Update 1.7

    So I was browing and suddenly a notification pops up about OSX update. It was about SMC Firmware Update 1.7
    I am using a MBP 15" Late 2011. ( OSX Version 10.8.2 )
    I did clicked update and it asked me to restart. But instead of a restart it automatically logged out. So I logged in and clicked Update and then when it asked me for restart it clicked restart. So now it showed me a Grey screen, the cursor was still there. The cursor was still moving. So I though now this is getting updated but it didn't showed any window of Software update for 20 mins. I assumed it was downloading the update.
    The update is just 1 MB or something and I have a connection of 2Mbps so 10 mins were too long I guess. I had to shut the mbp by holding the power button. after 2 mins I press the power button. it started and showed the window of software update and downloaded it automatically and updated, fans went on full speed as mentioned in the update.
    Now that I check my firmware version. It shows me " SMC Version (system):          1.69f4 "
    My question is shouldn't it be SMC Version : 1.7 ? :|

    That's the right FW version. Apple is all screwy with numbers. There posted FW update 1.7 mean just about nothing.
    If you want to save yourself a few headaches turn off the Auto Update system and then periodically run Software Update. If there are updates look at what they are and you can pick and chose which ones you install. If you don't need it, the system is running fine, there is no good reason to constantly do updates.
    This also give you a chance to look at the support document for the update and do a google search to see if there are any problems being reported.

  • Problem with SMC firmware update.

    I can't seem to run it. Everytime I go to, it never installs. I have a feeling that it has to do with bootcamp. Whenever I restart my computer, it runs Windows (I don't know how to fix that.) so I can't just press restart, I have to actively start OSX.
    I go to install it, my computer starts up, and then the installer pops up again. I press restart, start up the computer, same thing. I've done this 4 or 5 times and the same thing happens everytime. What should I do?

    Sheir,
    Go to System Preferences>Startup Disk and verify that OS X is the Startup OS that is selected for your Mac. If it is not the one selected, select it and restart your Mac a couple of times to verify that it will restart into OS X. If it won't then we need to figure out what is going wrong.
    If it successfully restarts into OS X then go to Applications>Utilities and look for the SMC Firmware Update.app that should have been placed there and trash it. Also trash the SMC Firmware Update.dmg if you have it. I don't think you will because Software Update has been doing the install. Empty the trash.
    Then go to Apple Downloads and manually download a fresh version of the iMac (early 2006) SMC Firmware Update released on 16 MAY 2006.
    Shut down all your other programs except the Finder and Dashboard. Unplug everything from your Mac except your USB keyboard and mouse. Turn off Airport and Bluetooth if they're on.
    Make sure you are completely familiar with the SMC Firmware installation instructions.
    Try to do the install again.

  • Macbook (late 2006) RSS unable to install SMC firmware update

    Hello,
    I bought my macbook on the 27th of December, and the first week it worked fine. Then started the RSS. I did some googling and found out some stuff about RSS, tried to install the SMC firmware update but it would just tell me that I don't need the update. After two weeks of constant RSS:ing I called applecare and told the guy about the problem, he told me to try to update the SMC and if I can't do it bring it in for service.
    Monday the 15th of January I went to the macstation in downtown Vancouver and told them about the trouble, they tried to boot it, and it actually booted but after like 3 minutes the macbook crashed. For about 10 minutes two guys tried to boot it and so on, but they didn't get it to boot. So they took it in for service and somebody was going to check out the macbook and see if it would need a replacement logic board - which it did. So on Monday they ordered the logic board, and today Monday 22nd of January I got it back. Now the thing that bothers me is that when I now try to update the SMC firmware (my current version is btw 1.13f3) it still just says that This computer does not need this update. oh well - i went to apples support page to try to see if there would be a newer release of the smc and then I noticed that in the bottom of the SMC firmware 1.1 update page it says:
    Note: This update is only or the original MacBook, and will not install on a MacBook (Late 2006).
    Then I really was like W T F?!
    I would assume that people who work for apple would know that the SMC update will not update on a computer from late 2006, but nobody ever mentioned this to me.
    I've now had the computer for about an hour and the CPU temperature is at about 50 degrees celcius, with firefox, msn and a terminal open... about 5% cpu load.
    What I'm really wondering is that is there anyone who has similar problems with a macbook late 2006? I guess I'll just have to see if it works and just like I told the guy at macstation, if it starts RSS:ing again I'll be banging on their door
    macbook 2,1 Mac OS X (10.4.8) rss, unable to install SMC firmware update
    macbook 2,1   Mac OS X (10.4.8)   rss

    See if reviewing the installation instructions provides any help:
    http://www.apple.com/support/downloads/macbookefifirmwareupdate10.html

  • Should I update my SMC firmware?

    I use YES method to keep my both cores runing in its full speed over 7 seven minutes and returned no any random shutdown. Should I keep updating my SMC firmware?
    My Macos is 10.4.6 and SMC is 1.4f8. I didn't have any update since this July.

    Holding CPU at full load for 7 min without a problem does NOT justify that you don't need the updates. RSD usually takes time to develop. Despite of all the application updates, 10.4.8 and SMC firmware 1.4f12 are the two things you must have. They will make ur macbook run cooler by changing the fan behavior so you won't be pushing the limit of ur macbook as much as before.
    Don't hesitate. I know some people think getting updates might not be a good idea after reading so many posts here. But keep in mind that this is a forum for us to report problems. The guys who never had a problem with their macbooks (which i tink is the majority) may never post here. Updates are not supposed to cause any problem, otherwise they wouldn't be released officially, don't ya think? If you did run into problems after update, it's ur macbook that is wrong, not the updates. It'll be better off that you just reinstall the whole OSx and get all the updates to obtain a clean system.

  • MacBook Pro SMC Firmware Update 1.3 update freezes mouse pointer

    After installing the update released today 5/28 (MacBook Pro SMC Firmware Update 1.3) my mouse pointer stalls, freezes on occasion. Very annoying. Anyone seeing the same. Fixes ... ?

    After applying the SMC Firmware update a few days ago, my keyboard and trackpad were acting erratic (freezing, hanging). It was immediately after the update and I had not had any problems with it before.
    I have also had random crashes, inability to use the keyboard/trackpad ever since.
    Today my keyboard and trackpad are completely unusable, external mouse works fine.
    I will take it to an Apple store tomorrow, hopefully my firmware can be reverted.
    Sounds like a lot of other people are having problems with this update. http://discussions.apple.com/thread.jspa?messageID=9549034&tstart=0#9549034

  • Unable to apply SMC Firmware update

    I am trying to apply the SMC 1.0 Firmware Update to my MacBook Pro. I click restart in the firmware update dialog, and the Mac reboots. I then see a folder with a question mark flash three times, then the Mac boots to OS X. I have tried numerous times from both warm and cold boots, but the firmware update will not start.
    I then tried to zap the PRAM, and attempt the firmware update. After doing that, the folder with the question mark flashes only once, then the Mac boots into OS X.
    I have downloaded the firmware update multiple times both through Software Update and via the web, but each time the result is the same.
    I have used Bootcamp to partition the drive. I am not holding the Option key down while the Mac boots, but I did try that once, and it did not help. OS X is my default OS.
    Any other suggestions?

    I have a feeling the problem was due to lack of free unpartitioned space on my main harddrive. What I did to solve this was buy an external Firewire drive, install OS X on it, then use it as the primary boot drive to do the firmware update. I am now running the latest SMC firmware. Let's see if it really helps the temperature problem.

  • Upgrade problematic SMC firmware 1.7 on 2011 MacBook Pro before OS X upgrade?

    I'll soon be installing OS X Mountain Lion on a 15" early-2011 MacBook Pro (8,2) currently running Snow Leopard (OS X 10.6.8). Should I upgrade its SMC firmware to the problematic v1.7 (which had number of battery-related or system-power problems reported about it in early 2013, if not since then) before the OS upgrade? (This firmware update was put out to users to "address a rare issue on some Apple notebooks where a battery that has accumulated more than 1000 charge cycles may unexpectedly shut down or stop functioning”; my Mac's battery has gone through just 352 cycles.)
    Apple's EFI and SMC firmware updates for Intel-based Macs table says my Mac should have 1.69f4 (SMC 1.7), but that table as recently as mid-April this year listed instead 1.69f3 (SMC 1.5) as what my Mac should have (and that's the version it does have); and the current download page for that firmware, MacBook Pro SMC Firmware Update 1.7 (though dated Dec 12, 2012) says it requires OS X 10.7.5 or 10.8.2 - Lion or Mountain Lion.
    I seem to remember that SMC firmware version disappearing from my Mac's Software Update listings, some while after I'd kept putting off choosing to install it because of the problems I'd read about it (including at least one reporting nightmarish troubles on same machine as mine) and because it didn't seem critical at my stage of battery life. Given the apparent ambiguity about which SMC firmware my Mac should or can have, and ensuing unwanted troubles after installation reported by at least a few folks, can I confidently install Mountain Lion without that SMC version, and then try to install it afterward?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Recent smc firmware update......

    it's not that i'm having any problems and really don't expect to, however, i'm a little concerned about the new update. i know it may stop rsd from occurring, but at what expense. is it simply disregarding a malfunction that is actually taking place, so that in time something more sever may occur.
    it's only a concern that i haven't heard on here yet, although i would like to hear what people's opinions are.

    I myself have installed it and have not had ay problems...
    Here is something that I found for you.
    "MacBook SMC Firmware Update 1.1
    About this update
    The SMC Update improves the MacBook’s internal monitoring system and addresses issues with unexpected shutdowns. This update is recommended for all MacBook systems, including those that received warranty repair."

  • Is SMC Firmware Update necessary?

    Hello there
    I have the Software Update window popping up telling me to download the SMC Firmware Update. I know that the update adjusts the fan behavior in the MacBook but does anyone know exactly what it does and changes?
    My MacBook has been working fine since I got it in July. No weird fan behavior nor RSD nor overheating problems (thankfully! I'm hoping it stays that way). So my question is do I need that update, or is that update only for users with those problems? If I download it, how does it alter my MacBook behavior?
    Any advise is appreciated! Thanks in advance.

    Honestly I was kind of like you. I downloaded the firmware but didn't install it for quite a while. My MacBook as worked fine and I saw no reason to screw that up.
    But..... it got the better of me and I went ahead and installed it. I haven't noticed any difference whatsoever. Fan behavior is the same I guess because I've only heard them a couple of time so that's never been an issue. I guess it may run a little cooler but again I don't really pay that much attention to the temperature anyway so I'm not sure.
    SMC is System Management Controller which is a micro-controller on the logic board that controls various functions (in this case the fan). I've never found anything specific other than some have said the fans run non-stop. Could be but I've experienced nothing different than before I installed the firmware.

  • Mac Pro SMC Firmware Update "An Unexpected Error Occurred (0)" HELP

    Mac Pro SMC Firmware Update (Version 1.1) Size (970 KB)
    "The SMC Firmware Update adjusts fan behavior in Mac Pro. The updater application will be installed in the /Applications/Utilities folder and will launch automatically. Please follow the instructions in the updater application to complete the process."
    -----THIS IS WHAT HAPPEND TO ME----I try this morning to install and this is what I got:
    " An unexpected error occurred (0).
    Your firmware can not be Updated. "
    "See www.apple.com/support for more information."

    Are you booting from RAID? even though it warns that you can't be booting from RAID, some people still run the update.
    Any problem with your system?
    While it only says that you need to quit any and all open programs, sometimes it helps to reboot (and boot into Safe Mode) just to begin the process.
    When there was an SMC Firmware update before (last fall) some people also had trouble.
    We aren't mind readers, and to say it failed doesn't give those of us reading this (and non of us are Apple tech support) a lot to go on.
    +Please follow the instructions in the updater application to complete the process.+
    +To update the SMC firmware on your Mac Pro:+
    +Your computer’s power cord must be connected and plugged into a working power source.+
    +1. Quit all other open applications.+
    +2. Click Restart in the Mac Pro SMC Firmware Update window and wait for your computer to restart.+
    +The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.+
    +Important: Do not interrupt the update.+
    +Your computer restarts automatically when the update is completed and opens the Mac Pro SMC Firmware Update.+
    +3. Click OK. The SMC firmware is now up-to-date.+
    +If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.+
    Note:
    +This update requires a Macintosh formatted disk or partition. If you are starting up using a RAID (Redundant Array of Independent Disks) subsystem, you must attach a Macintosh formatted storage device to apply this update.+
    *+Some USB and FireWire devices may prevent firmware updates from installing correctly.+*
    *If you are having trouble installing an update try disconnecting non-essential devices and use only an Apple branded keyboard, mouse and monitor.+*
    http://www.apple.com/support/downloads/macprosmcfirmwareupdate11.html

  • SMC-Firmware for MacBook Pro 2010 (7,1)

    Hey,
    I have a serious problem with my 13-inch MacBook Pro Late 2010 (Modell 7,1): a few days after shipping Mountain Lion, Apple has shipped a wrong update for me via "Software Updates" the in the AppStore. To name it: I received a SMC-Update for a 2010 MacBook Air.
    My Mac was broken afterwards but due to the help of an experienced friend of mine, we were able to bypass SMC and to install a SMC-Firmware of a MacBook Pro 5,1 (Code: 1.32f8). Why this Firmware and not mine? There is no 7,1 SMC download on the Apple Support Page for my MacBook Pro.
    Although it should be able for Apple to deliver a 7,1 SMC Firmware to me, they are not willing to do so. I have tried the 8,1 13" SMC-Firmware which is not working for me.
    My question is: first of all, out to all the owners of a MacBook Pro 7,1: would it be able to "extract" their SMC-Firmware (maybe create an installer.pkg) and send it to me? Or does anyone have an ideo how to solve my problem?
    I would be very happy to hear from you soon!
    Yours,
    little_joe

    https://support.apple.com/kb/HT1237
    https://support.apple.com/kb/HT1557
    https://support.apple.com/kb/HT2213

Maybe you are looking for