SMC in Solaris 9 not starting

Hi
I have installed Solaris 9 12/04 on E450 Server . when i try to start SMC from /etc/init.d/init.wbem i am getting a message " Exception in thread "main" java.lang.NoClassDefFoundError : com/sun/management/viperimpl/server/ViperServer.I have Solaris Management console 2.1 installed.
Please suggest what to do ?

What do you mean under "jre2" or "jre3"? What version of JRE you exactly mean?
AFAIK, Java 3 Runtime Environment does NOT exist in the nature :) It's a joke? If not, please, provide valid download link to java.sun.com we can to download this wonderful invisible Java edition ;)
PS. I've the same problem on Solaris10, both SPARC and x86. The java -version command on my Blade box has this output:
# java -version
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
IMHO, this means, that Sol10 uses JRE2, right? Next, we listen about hypotetical "Java 3" runtime?

Similar Messages

Solaris 10 x86 - SMC server not starting

Same problem as here :
http://groups.yahoo.com/group/solarisx86/message/12180
No solution yet ...
SMC server doesn't start at boot, and won't start manually with /etc/init.d/init.wbem start
starting it manually gives :
# export VIPER_HOME=/usr/sadm/lib/smc
# ./smcwbemserver -p 898 start
Starting Solaris Management Console server version 2.1.0.
endpoint created: :898
Solaris Management Console server exiting: internal initialization failed: Initialization failed for service com.sun.management.viper.services.Authorization.
Any idea?
I have a basic Solaris 10 setup, with Entire Collection selected.
My graphic card is not working so I had to install in text mode and access X remotely.

I believe this is a fault in the crypto file that is mentioned in the Yahoo X86 posting, namely pkcs11_kernel.so. I have a possible workaround for this. Try looking at:
http://www.webmin.com
This is a free Web-based management tool that has most but not all of the functionality of the SMC. I tried downloading and installing the Solaris package from their download page, but this didn't work. What I eventually did was remove the package and download and install the generic Unix version, which was webmin-1.160.tar.gz as of when I downloaded it. The only gotchas to watch for are to run the setup.sh script and select Sun Solaris as the O/S, then select Solaris 9 as the version (they don't technically support 10 yet). I have been able to add users and groups and manage the disk without problems.
Rich Lair

Sapinst not started for PI 7.1 on Solaris 1064bit and Oracle10

Hello,
We are running NW 7.10 PI 7.1 installation on Sun Solaris 10 and Oracle 10.2.0.4 platform. We are using the following installation DVDs for installing PI.
Installation Master = 51033240_21
Java Component = 51033242
UC Kernel = 51033245
We are doing following to run ./sapinst
1. log on as root
2. set JAVA_HOME, TEMP and DISPLAY
3. go to master DVD and run ./sapinst
The instgui is not showing any error Problematicc sentence structure ./SAPinst is just getting frozen. We used another script ./sapinstgui from the same directory and it shows us some logon screen with port 21212 in the GUI. However, when we try clicking logon it does nothing.
We've ensured that port 21212 or any other port that supposed to be used by SAPinst are not blocked on the firewall or not used by any other application. Host and DNSfiles are also okay. Based on one of the previous forum /etc/nss*.conf files also exist in our PI host. Not sure why the SAPinst GUI is not started.
We've also ensured that we need any new SAPinst support pach from marketplace, however current installation master dvd is the latest one release in March 09 and there are no further patches released by SAP.
Please help if anyone of you have faced this issue before.
Harshal

I tried ./sapinst SAPINST_DIALOG_PORT=<free_port_number> as well as the default port number. Both of them fails.
normally ./sapinst itself should establish all the port automatically that it uses. Which currently is not happening.
Do you want me to copy installation master dvd for Solaris on windows work station from where i'm initiating it through Xmanager session and try running ? The installation master dvd that i'm currenty using is for Solaris platform which meanase ./sapinst is compiled for Solaris, how will it be supported by Windows ?
Harshal

Could not start Agent on a Solaris 5.10u2 x86 machine

Hi,
I installed SunMC 3.6.1 on a Solaris 5.10u2 x86 machine. Only Agent
and Concole are installed.
There's no error during installation and setup, but the agent could not be started.
# /opt/SUNWsymon/sbin/es-start -a
Could not start Agent.
After running svcs -x, I could see:
# svcs -x
svc:/application/management/sunmcagent:default has no "restarter" property group; ignoring.
svc:/application/management/sunmcplatform:default has no "restarter" property group; ignoring.
svc:/application/print/server:default (LP print server)
State: disabled since Mon Aug 21 10:41:38 2006
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: lpsched(1M)
Impact: 2 dependent services are not running. (Use -v for list.)
# svcs -v
offline - Aug_21 - svc:/application/print/ipp-listener:default
offline - Aug_21 - svc:/application/print/rfc1179:default
- - - svc:/application/management/sunmcagent:default
How to solve this problem? Any help is appreciated.
Hal

Hi Hal, :)
# /opt/SUNWsymon/sbin/es-start -a
Could not start Agent.I've seen this before too. "svcadm enable/disable sunmcagent" didn't fix things. But for some reason if I started the agent interactively (es-start -ai) it worked... and I let the Agent load a few modules and verified it worked in the Console. Then once I quit out of interactive mode (thereby stopping the Agent) svcadm enable/disable and es-start/stop worked correctly again.
I had that happen to me 2-3 times now, and every time mucking about in interactive mode a bit fixed it. It must reset something in svcs.
Regards,
[email protected]
http://www.HalcyonInc.com

Solaris 10 installation does not start

Hi
I am new to solaris . I downloaded the four zipped ISO files of solaris 10 from the website. I burned the images on the cd. When i insert the disk 1 and restart the computer it does not detect the cd as bootable and does not start the installation. I have win XP previously installed as the only os on my laptop. help me pls

Make sure your computer supports bootable CD's and that you burned the images correctly to your CDR.

Solaris 10 does not start X

Seems like a lot of people are having the same problem as i have , that X is not launched when booting up machine.
I have tried to install Solaris 4 times now. With different package setups, all setups using all packages in the chosen group.
All 4 times the installation has been successful, no errors during installation. it finds my ATI mobility card, mounse and keyboard are correct setup.
During the install the X test is successful with movement in mouse and an visible testimage at 1400x1050 pixels.
Still, when booting after installation the X is not starting (CDE or gnome).
When looking inside /usr/X/bin, /usr/X11/bin there is only two identical files: X and Xserver. It seems like i am missing packages, Xorg and so on.
What to do?
Is this something similar some one else has seen. Do i do anything wrong during setup/install???
Everything else works as it should, Network, FTP and so on, but not X.
This is run on AMD64, so the 64 bit version of solaris is started.

Yes ...
I have the similar problem with sun equipment (Blade and Ultra with Sun monitor) with beta version and with final release of solaris 10 (rel 3/05)
I looked around on the net and find many people with this problem ... What it is amazing is that no one was able to answer ... !
It is NOT a compatibility problem considering I`m using ONLY Sun hardware!
At that point I think it is really a serious bug... (same setup on Solaris 9 produces a full working installation)
Some one can just say if it is a bug or if the setup in Solaris 10 should be different from Solaris 9 to have the X Windows system working ?
Thank you

Can not start installation of Solaris 8

(-: frenchee having pb with english speaking, please be nice : I still try to solve it ;-)
On my Ultra1 creator, there is "ultrapenguin" a release for ultrasparc of Linux RH 5.2.
I put the CD which I downloaded from "sun download center" ; I start the sun ; I press "stop+A" ; I send "boot cdrom" command ; it reply "can not start with file and args given" or something like that...
The same procedure works fine with the install CD of RedHat 5.2 or with the install CD of Debian Potato (all for sparc, of course).
What is wrong ??
Thanks by advance !

YES I did !!
I found the solution last sunday : one of my friend give me an old version of Solaris (2.6) with the entire docs and packaging.
In these docs, I found the command I (and you) have to type if you want to run the installation :
after [stop]+[a], type the line
boot cdrom - browser
then, come back here and say to all (and to Sun corp) that a little readme file on the CD would be nice... ;-)
Thanks to all.

TS2306 my iMac Fan is running almost not stop from start up at over 3000 RPM and SMC reset has not helped...

I know this in not a new problem but I have tried to follow self help and not having any joy!
very fustrating - I am in Welllingotn NZ and it not hot here! about 12-18 deg C Ambinent, and the fan runs loud!
I have just installed iStat Nano and it says the CPU fan is runnig at arround 4000RPM.
Several shut downs and SMC resets have not worked.....
Runis my fantastic piece of art - but makes a good use for the noise cancelling head phones I bought a couple of years ago....
- Have just read that my 3rd Party RAM may be the culprit - do I have to remove or is there a solution???
PRG

Launch the Activity Monitor application and select the Energy tab to see which process is using the most energy.

Unable to install SUN SMC on solaris 10

Hi,
I am trying to install SMC on solaris 10. es-guisetup is giving errors as given below:
smcdatabase service is always in maintenance mode.
I am running postgres on 5433 port.
Please help me in this regard.
Here is the log file:
# cat core-db-setup_rtisifldhdesk.100929090636.6642
Started /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh at Wed Sep 29 09:06:36 EDT 2010.
Running on SunOS rtisifldhdesk 5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210.
-sh: initdb: not found
bash-3.00# cat gui_setup_rtisifldhdesk.100929090557
The system memory to be compared has mapped to : 8192
Skipping the Disable SNMP panel as a port other than 161 is specified as the agent port
The web server organization is given as : ADP
The web server location is given as : njjjjj
The Setup script will be executed as : /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh
stty: : Invalid argument
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot create
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/postgresql.conf: cannot create
SYMON_JAVAHOME is set to: /usr/java
JDK version is: "1.5.0_22-b03"
This script will help you to setup Sun Management Center 4.0.
Following layer[s] are installed:SERVER,AGENT
None of the layers is setup.
Following layer[s] will get setup: SERVER,AGENT
Database will be setup.
Following Addon[s] are installed:
Advanced System Monitoring,ELP Config-Reader Monitoring,Desktop,Service Availability Manager,Sun Fire Entry-Level Midrange System,Netra,DomMonit SPARC Enterprise Mx000,Dom DR SPARC Enterprise Mx000,PltAdmin SPARC Enterprise Mx000,Performance Reporting Manager,Solaris Container Manager,Sun Fire Midrange Systems Domain Administration,Dynamic Reconfiguration for Sun Fire High-End and Midrange Systems,Sun Fire Midrange Systems Platform Administration,Starfire Monitoring,Sun Fire High-End Systems Monitoring,Sun Enterprise 6500-3500 Servers/sun4d DR,Sun Enterprise 6500-3500 Servers/sun4d Config Reader,System Reliability Manager,Workgroup Server,Generic X86/X64 Config Reader.
Checking memory available...
Configuring Sun Management Center DB...
The Port 5433 for Sun Management Center DB has already been used.
Enter another port for Sun Management Center DB listener : : 2521
Initializing SunMC database.
disabled sunmcdatabase service from maintenance state during setup
check the smf database service log to know the reason
Failed to enable service sunmc-database
Database setup failed : db-start failed
Updating registry...
None of the base layers are setup.
No Addon is setup.
Following Addons are not yet setup: Advanced System Monitoring,ELP Config-Reader Monitoring,Desktop,Service Availability Manager,Sun Fire Entry-Level Midrange System,Netra,DomMonit SPARC Enterprise Mx000,Dom DR SPARC Enterprise Mx000,PltAdmin SPARC Enterprise Mx000,Performance Reporting Manager,Solaris Container Manager,Sun Fire Midrange Systems Domain Administration,Dynamic Reconfiguration for Sun Fire High-End and Midrange Systems,Sun Fire Midrange Systems Platform Administration,Starfire Monitoring,Sun Fire High-End Systems Monitoring,Sun Enterprise 6500-3500 Servers/sun4d DR,Sun Enterprise 6500-3500 Servers/sun4d Config Reader,System Reliability Manager,Workgroup Server,Generic X86/X64 Config Reader
Could not finish requested task.
Thanks
Sugunakar

Hi Sugunakar,
There are a few small things I can think of checking:
I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
Regards,
[email protected]

Intel iMac not starting...please HELP!!!

Hey all,
Well I just arrived to my new dorm room in college with my one week old iMac and I'm encountering some serious problems....
I plugged the computer in while it was on my desk, with other hardware attached into a surge protector and it worked fine for about two days. Today I recieved some new furniture so I had to unplug the computer to move things around....I unplugged it and placed it flat (screen side up) on a pillow.
I plugged it back in with a new surge protector, connected the hardware and pressed the button...didn't start. The printer, the speakers, everything else had power so it wasn't a faulty power strip...just the computer wouldn't start. I then did the following:
1. Tried different connections on the same surge protector
2. Switched back to the old surge protector
3. Plugged the computer w/o external devices into the wall directly
4. Tried it as described above into a different wall outlet
And nothing has worked. I'm going to call Apple in the morning, but as you can imagine with the year starting this is the last thing I need. I'm using my old G3 iBook at the moment to get by, but what has happened to my brand new iMac? Thanks for your help

DIRECTLY from the iMac Help site:
The System Management Controller (SMC) is a chip on the logic board that controls all power functions for your computer. If your computer is experiencing any power issue, resetting the SMC may resolve it. The SMC controls several functions, including:
* Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
* Handling system resets from various commands.
* Controlling the fans.
Note that resetting the SMC does not reset the PRAM. Resetting the SMC will not resolve issues in which your computer is unresponsive—in these situations, restarting your computer will generally suffice. If your computer isn't responding, perform these steps one at a time, in this order, until the issue has been resolved:
1. Force Quit (Option-Command-Escape).
2. Restart (Control-Command-Power).
3. Force Shut Down (press the power button for 10 seconds).
Resetting the SMC can resolve some computer issues such as not starting up, not displaying video, sleep issues, fan noise issues, and so forth. If your computer still exhibits these types of issues after you've restarted the computer, try resetting the SMC. To reset the SMC on an iMac (Early 2006), iMac (Mid 2006), or Mac mini (Early 2006):
1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
2. Unplug all cables from the computer, including the power cord and any display cables.
3. Wait at least 15 seconds.
4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
5. Press the power button on the back to start up your computer.
The iMac (Early 2006) and later models do not have a button on the main logic board for resetting the SMC, which eliminates the need to remove the computer's cover to reset it (as required for some earlier models).
iMac 20" Intel Dual Core Mac OS X (10.4.7) It's Sweet, It's a MAC

Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1

Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.

Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks.

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio.

Mac Pro will not start up. Firmware or graphics problem?

A really weird thing happened to my MacPro 1,1. It has been working fine for the last 5 years until today when I was running Parallels and suddenly the screen got those thin, horizontal, wavy, purple lines all over the place and cursor turned into a beachball. I tried to Force Quit Parallels but it didn't work. I had to hold power button to force the computer to shut down.
I am running 10.6.8 and just yesterday I installed some updates but these were minor: Safari, iTunes, Java. The computer worked fine after those have been installed.
Now the scary thing - the computer does not start up properly. When I press the power button I hear the chime but then I see the grey Apple logo with those purple, wavy lines in it. The computer seems to find the system on the hard drive but when it gets to the login screen it doesn't display the login window or the background properly. Instead I get just a plain grey color with a cursor (arrow) that moments later turns into a beachball.
I unplugged everything to bare minimum and tried to start it up from Snow Leopard CD. It finds the CD but the same thing happens - I don't see the CD installation menu, just a blank grey screen.
This makes me think: either the graphics card died (GeForce 7300GT) or it is some OpenFirmware problem.
I removed the card from its slot, blew off some dust and reset it. No change. I tried resetting SMC as well (Even though the instructions are a bit weird: unplug power, wait, plug it back in, wait, press power). I do have non-Apple RAM installed (6GB total) but it doesn't seem to be RAM issue - all status LEDs on both riser cards just blink red briefly during power up.
Should I plan a trip to the Genius Bar or do I own now a very expensive paperweight?
Any ideas? I would greatly appreciate your help.

I found your thread very helpful. I have a 2009 mac pro 3,1 that seems to be doing similar things. It was working fine then occasionally the screen would flicker and then freeze the system. had to power off to get out of it. Now it won't boot. I get purple and white vertical lines and the apple with the pinwheel. the pinwheel stops after a while and thats it. i tried booting from the cd and get to the harware test but the screen is split left and right. really unreadable. i suspect the graphics card (geforce ) so i tried booting without the card installed. i believe it still did not complete the boot. my question is should i be able to boot without a graphics card installed? any thoughts or advice would be appreciated.
jim

WebLogic admin server not starting.

Hi all,
I have a problem with my WebLogic Admin server not starting. Following a VM reboot last week our admin servers are no longer starting. On this particular server we have 3 admin servers serving 3 separate environments.
Theserver seems to be getting stuck right at the very start. I have tried removing tmp, cache and ldap directories. Searched for and removed all .lok files. I have manually turned on full debug to try and flush some extra information through standard out but no luck. It is very peculiar. When we have exported the domain to another box and started the admin server it has come up successfully.
This is the output from the logs - this is literally as far as it get before it hangs and does nothing. As far as I know the next thing WebLogic is doing is checking the version. Has anyone any ideas what the problem could be? It is server wide as all 3 admin servers on the same box are suffering the same problem.
This is Weblogic 10.3.2 on a Solaris vm
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/lib/tools.jar:/apps/Oracle/Middleware64/utils/config/10.3/config-launch.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.jar:/apps/Oracle/Middleware64/modules/features/weblogic.server.modules_10.3.2.0.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/webservices.jar:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/apps/Oracle/Middleware64/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/apps/Oracle/Middleware64/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/xqrl.jar
PATH=/apps/Oracle/Middleware64/wlserver_10.3/server/bin:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/jre/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin:/usr/bin:/usr/sfw/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin/java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/apps/Oracle/Middleware64/wlserver_10.3 -Dwls.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sysext_manifest_classpath weblogic.Server
<09-Jan-2013 18:32:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-21-133393-1.6.0_20-20100512-2127-solaris-sparcv9 from Oracle Corporation>

Just a wild guess (as you have restarted the physical servers), it could be related to the entropy of the machine.
What you can try to do is edit the java.security file in the $JAVA_HOME/jre/lib/security directory.
Find the entry securerandom.source and edit the value to file:/dev/./urandom (instead of file:/dev/urandom)

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no change

Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

My MacBook Pro will not start up. Is there anything that I can do to see if I can start it up before I need to go in for an appointment?

My MacBook will not start up. The only response I can get out of it is the battery light on the side which shows it as being full. Is there any wizardry that will magic it back to life by a sequence of buttons or something?

Try holding the power button down for ten seconds and then try booting it.
Try to reset SMC. http://support.apple.com/kb/HT3964

SMC in Solaris 9 not starting

Similar Messages

Maybe you are looking for