SMC on solaris 10 x86 - toolbox java exception

Just installed (for the first time) solaris, to test it on a x86, had some difficulties with the NIC (realtek), but now seems ok.
But I can't start sun managemnt console, keep getting the same error: can't open toolbox, and gives me a java exception.
installed both jre 1.4.2 and jre 1.5.0.
the exception is
java.net.MalformedURLException: no protocol:
any idea on the problem?
Thank you in advance
Stefano

Thanks for your help.
Yes, the browser starts, tells me to wait for the toolbox to load, and then stops.
When i go to the message log there are always two error "toolbox not loaded" and the exception...
I've just started with solaris, and I've no other machine to try to connect...
I' ve tought of something about connection, even because of the problem with the card, but everithing else seems ok.
How can I check for this?
Thanks again.
Stefano.

Similar Messages

  • Install Java on solaris x86

    Hello - I am connected to one Solaris x86 machine remotely. It does not have GUI in it and only command line execution. I would like to install Java on this machine. Can you please provide me the link where I can get java and instructions to install it - I surfed in previous topics - But no result found
    Thank you!

    Java is built-in.
    Or you can download a new version from java.sun.com on a different machine and then sftp it over to the Solaris box.

  • Unable to install SUN SMC  on solaris 10

    Hi,
    I am trying to install SMC on solaris 10. es-guisetup is giving errors as given below:
    smcdatabase service is always in maintenance mode.
    I am running postgres on 5433 port.
    Please help me in this regard.
    Here is the log file:
    # cat core-db-setup_rtisifldhdesk.100929090636.6642
    Started /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh at Wed Sep 29 09:06:36 EDT 2010.
    Running on SunOS rtisifldhdesk 5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210.
    -sh: initdb: not found
    bash-3.00# cat gui_setup_rtisifldhdesk.100929090557
    The system memory to be compared has mapped to : 8192
    Skipping the Disable SNMP panel as a port other than 161 is specified as the agent port
    The web server organization is given as : ADP
    The web server location is given as : njjjjj
    The Setup script will be executed as : /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh
    stty: : Invalid argument
    /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot create
    /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/postgresql.conf: cannot create
    SYMON_JAVAHOME is set to: /usr/java
    JDK version is: "1.5.0_22-b03"
    This script will help you to setup Sun Management Center 4.0.
    Following layer[s] are installed:SERVER,AGENT
    None of the layers is setup.
    Following layer[s] will get setup: SERVER,AGENT
    Database will be setup.
    Following Addon[s] are installed:
    Advanced System Monitoring,ELP Config-Reader Monitoring,Desktop,Service Availability Manager,Sun Fire Entry-Level Midrange System,Netra,DomMonit SPARC Enterprise Mx000,Dom DR SPARC Enterprise Mx000,PltAdmin SPARC Enterprise Mx000,Performance Reporting Manager,Solaris Container Manager,Sun Fire Midrange Systems Domain Administration,Dynamic Reconfiguration for Sun Fire High-End and Midrange Systems,Sun Fire Midrange Systems Platform Administration,Starfire Monitoring,Sun Fire High-End Systems Monitoring,Sun Enterprise 6500-3500 Servers/sun4d DR,Sun Enterprise 6500-3500 Servers/sun4d Config Reader,System Reliability Manager,Workgroup Server,Generic X86/X64 Config Reader.
    Checking memory available...
    Configuring Sun Management Center DB...
    The Port 5433 for Sun Management Center DB has already been used.
    Enter another port for Sun Management Center DB listener : : 2521
    Initializing SunMC database.
    disabled sunmcdatabase service from maintenance state during setup
    check the smf database service log to know the reason
    Failed to enable service sunmc-database
    Database setup failed : db-start failed
    Updating registry...
    None of the base layers are setup.
    No Addon is setup.
    Following Addons are not yet setup: Advanced System Monitoring,ELP Config-Reader Monitoring,Desktop,Service Availability Manager,Sun Fire Entry-Level Midrange System,Netra,DomMonit SPARC Enterprise Mx000,Dom DR SPARC Enterprise Mx000,PltAdmin SPARC Enterprise Mx000,Performance Reporting Manager,Solaris Container Manager,Sun Fire Midrange Systems Domain Administration,Dynamic Reconfiguration for Sun Fire High-End and Midrange Systems,Sun Fire Midrange Systems Platform Administration,Starfire Monitoring,Sun Fire High-End Systems Monitoring,Sun Enterprise 6500-3500 Servers/sun4d DR,Sun Enterprise 6500-3500 Servers/sun4d Config Reader,System Reliability Manager,Workgroup Server,Generic X86/X64 Config Reader
    Could not finish requested task.
    Thanks
    Sugunakar

    Hi Sugunakar,
    There are a few small things I can think of checking:
    I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
    Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
    smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
    /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
    I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
    Regards,
    [email protected]

  • Install error for Oracle 10g on Solaris x86 64-bit.  NETCA won't run

    Hi All,
    I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
    thanks, dave
    ERROR FILE:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0xFEEF24E8
    Function=strchr+0x8
    Library=/lib/libc.so.1
    Current Java thread:
         at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
         at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
         at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
         at oracle.net.ca.InitialSetup.<init>(Unknown Source)
         at oracle.net.ca.NetCA.main(Unknown Source)
    Dynamic libraries:
    0x8050000      /data1/oracle/oracle/jdk/jre/bin/java
    0xfefc0000      /lib/libthread.so.1
    0xfefd0000      /lib/libdl.so.1
    0xfeed0000      /lib/libc.so.1
    0xfea00000      /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
    0xfee80000      /usr/lib/libCrun.so.1
    0xfee50000      /lib/libsocket.so.1
    0xfedc0000      /lib/libnsl.so.1
    0xfeda0000      /lib/libm.so.1
    0xfeeb0000      /usr/lib/libsched.so.1
    0xfe9a0000      /lib/libm.so.2
    0xfed50000      /lib/libscf.so.1
    0xfe980000      /lib/libdoor.so.1
    0xfe960000      /lib/libuutil.so.1
    0xfe940000      /lib/libmd5.so.1
    0xfe920000      /lib/libmp.so.2
    0xfe8e0000      /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
    0xfe890000      /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
    0xfe850000      /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
    0xfe830000      /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
    0xf1a00000      /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
    0xfc780000      /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
    0xf13c0000      /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
    0xf0f90000      /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
    0xf0f30000      /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
    0xf0d50000      /usr/dt/lib/libXm.so.4
    0xf0cf0000      /usr/openwin/lib/libXt.so.4
    0xf0cc0000      /usr/openwin/lib/libXext.so.0
    0xf1890000      /usr/openwin/lib/libXtst.so.1
    0xf0c30000      /usr/openwin/lib/libX11.so.4
    0xf0be0000      /usr/openwin/lib/libdps.so.5
    0xf0a90000      /usr/openwin/lib/libSM.so.6
    0xf0a70000      /usr/openwin/lib/libICE.so.6
    0xf0a30000      /data1/oracle/oracle/lib32/libnjni10.so
    0xefe00000      /data1/oracle/oracle/lib32/libclntsh.so.10.1
    0xefc60000      /data1/oracle/oracle/lib32/libnnz10.so
    0xf0a10000      /lib/libkstat.so.1
    0xefc40000      /lib/libgen.so.1
    0xefc20000      /lib/librt.so.1
    0xefbf0000      /lib/libaio.so.1
    0xefbd0000      /data1/oracle/oracle/lib32/libldapjclnt10.so
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
    eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
    from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
    to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
    tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
    the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
    compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
    the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
    Local Time = Tue Aug 29 13:49:22 2006
    Elapsed Time = 225
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
    #

    I have the same problem on Linux Debian 3.0.
    My /etc/hosts looks like:
    127.0.0.1     localhost.localdomain     localhost
    #192.168.100.1     bt.lan.home     bt
    #192.168.100.5     jacek.lan.home     jacek
    # The following lines are desirable for IPv6 capable hosts
    ::1     ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhostsPlease help.

  • How to integrate a Solaris x86 server on Sun Management Center ?

    Hello people,
    I want to integrate a Solaris x86 server on Sun Management Center platform.
    If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
    In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
    It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
    /opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
    I supose that in this directory, SunMC will install sparc binary files
    At this point, I can't follow the installation and abort it.
    Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
    Thanks

    Hi Hisham,
    hishooooo wrote:
    Dear Gents,
    I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
    successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
    my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
    could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
    Regards,
    [email protected]
    http://www.HalcyonInc.com

  • Install oracle 8.1.7 on Solaris(x86) 10 b72

    Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
    When I run runInstaller I have
    135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
    ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
    ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
    java.lang.UnsatisfiedLinkError:

    try this:
    LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
    ./runInstaller

  • Oracle 8.1.5 Client/WLS/Solaris x86

    has anyone been able to get Oracle's client 8.1.5 running on Solaris x86 in conjunction with WLS to talk to back-end Oracle? Any help would be greatly appreciated.thanks.

    This will not work. We have not built the native libraries to work with
    Solaris on Intel..
    I suggest trying the platform independent type 4 JDBC driver available for
    free from Oracle. It is supported (as is any JDBC driver) with WebLogic
    Server. To download it:
    Go to http://www.oracle.com and select the "Download" option.
    From the resulting page, use the "Select Utility or Driver" dropdown to
    select Oracle JDBC drivers
    From the resulting page, scroll down a little (since SQLJ stuff appears at
    the top).
    Or, to go directly there:
    http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Dean Davis" <[email protected]> wrote in message
    news:3a267487$[email protected]..
    has anyone been able to get Oracle's client 8.1.5 running on Solaris x86in conjunction with WLS to talk to back-end Oracle? Any help would be
    greatly appreciated.thanks.

  • How to integrate Solaris x86 server on Sun Management Center ?

    Hello people,
    I want to integrate a Solaris x86 server on Sun Management Center platform.
    If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
    In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
    It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
    /opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
    I supose that in this directory, SunMC will install sparc binary files
    At this point, I can't follow the installation and abort it.
    Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
    Thanks

    Hi
    From the Unix prompt enter oemapp console(for v9.x). If you are using earlier versions it is oemapp console (for starting the console) and oemapp dbastudio(for starting dba studio)
    For starting OMS enter: oemctrl start oms.
    Hope this helps
    sarath

  • Core 2 Duo and solaris x86 11/06 works for me

    This is FYI, since I seen (and posted) problems, but I haven't seen the solution posted.
    I have successfully gotten solaris x86 11/06 to install and run on my core 2 duo machine. I had tried solaris x86 06/06, but I could only run in 32bit mode until patch 118855-19 was installed. It looks like 118855-33 is the baseline for 11/06.
    With 06/06 I had to edit the grub command and add " kernel/unix" to the end of the 2nd line. This would force 32 bit mode rather than 64 bit. If I tried 64 bit, it would enter an endless reboot cycle. Once I installed the patch to 118855-19 I could run solaris 10 06/06 in 64 bit mode without issue.
    Again, since solaris 10 11/06 is at 118855-33, it runs on my core2 machine straight from the install.
    Hope this helps

    On a laptop there is little point with running a 64-bit operating system unless it physically has more than 4gb of ram, or if you are processing datasets exceeding 4GB of ram. Unless you're into assembly or use Solaris for some reason to manipulate media, little is to be gained by using 64-bit versions if anything. The increased pointer, integer, and padding causes more memory to use for the same software, most software on 64-bit operating systems runs in 32-bit mode because there is no need to have 16 exabyte memory addressing capability for anything but media encoders, giant databases, or extremely bloated single-threaded software. Sun Java Creator takes a heck of a lot of ram, but even at peak it's still under 4GB. If you move files bigger than 4GB, the ability to memory map all 4096MB might have less overhead on a 64-bit operating system, but generally from an end-user perspective, especially on a fast Intel or Opteron system, you won't notice the difference much. Solaris is bi-arch, a large chunk of Windows Vista and XP x64 is bi-arch, and most of FreeBSD and Linux are bi-arch in 64-bit versions, as I said, no point in making everything 64-bit. 64-bit device drivers is an issue for every OS, you should stick with 32-bit on a laptop, and hold off on desktops unless you need extended assembly registers available only in 64-bit mode.

  • Problem Oracle10G Installation in Solaris-x86

    Hai,
    I am facing problem when installing Oracle10g on solaris machine.
    I created user and group for oracle and also changed some kernel properties.after changing all requirements i am trying to run runInstaller...but it gave exception like this ...
    Exception:
    Starting Oracle Universal Installation...
    Checking Installation requirements...
    Checking Operating System version :
    must be 5.6,5.7,5.8,5.9 Actual 5.10
    failed <<<<
    exsting oracle universal installer.log for this session can be found at /tmp/orainstaller/datetime....
    I am using ---
    Oracle version : Oracle Database 10g Release 1(10.1.0.3) for Solaris x86
    Solaris Version : Solaris 5.10
    can any one help me out from this problem....
    Thanks in advance ....
    -Lakesh

    Oracle 10G release 1 only support up to Solaris 9.
    You probably need to install 10G release 2. The second release of major Oracle version is always more stable anyway.
    http://download-west.oracle.com/docs/cd/B19306_01/install.102/b15697/pre_install.htm#sthref110

  • Support for JRockit for WebLogic 10.3 in Solaris x86

    Hi All,
    I am trying to install JRockit Mission Control 3.1.2 in a Solaris 10 x86 platform.
    For Solaris Spark I know there is a special distribution.. For Solaris 10 x86 I am trying to install the generic linux version.
    When I try to install the jrmc-3.1.2-1.6.0-linux-ia32.bin I get the following error:
    jrmc-3.1.2-1.6.0: Cannot find /lib/ld-linux.so.2
    I also try with 64bit edition of the jrockit mission Control but I get a similar error but trying to find the /lib64/ld-linux.so.2.
    Is Solaris 10 x86 supported? Or at least, is there a workaround to install it?
    I find some site talking about JRockit for Solaris Spark, but seems to me that Solaris x86 is not supported...
    Thanks in advance
    Pablo

    Hi,
    The DTD used in "web.xml" should not cause any issue ...though it's the OLD "web.xml"...Please try to run the Following command to Generate the New Deployment Descriptors from the Existing Application:
    Step1). Open a Command Window and Run "setWLSEnv.sh" or "setWLSEnv.cmd".
    Step2). In the Command Prompt move to the Current Directory where you have placed your Application and then Run the Following Command
    java weblogic.DDConverter  -d NewDDs  jamagent.war
    Here Above Command Will read the "jamagent.war" War archive and then It will generate the New DDs in "NewDDs" directory...Which we need to replace with the OLD DDs present in our WebApplication..
    Thanks
    Jay SenSharma
    http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

  • Sun studio 12: java exception on load

    I frequently get the following error when starting the sun studio 12 netbeans ui on Solaris 10 on Intel:
    *********** Exception occurred ************ at 12:45 PM on Jul 3, 2007
    java.lang.UnsatisfiedLinkError: no base in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
    at java.lang.Runtime.loadLibrary0(Runtime.java:822)
    at java.lang.System.loadLibrary(System.java:992)
    at com.sun.tools.swdev.toolscommon.base.InstallDir.loadLibrary(InstallDi
    r.java:85)
    at com.sun.tools.swdev.toolscommon.base.Stat.<clinit>(Stat.java:201)
    and this prevents the UI from working properly. I have to retry a few times and sometimes it starts up without any issues. Any idea what can cause this and how to prevent it from happening?

    It seems to depend on what directory I am in when I try and launch sunstudio. Sometimes it only works when I am in the root folder, sometimes it works when I am in the folder that contains my project.
    This is the only message on the console where i run it from:
    Warning: Cannot convert string "-monotype-arial-regular-r-normal--*-140-*-*-p-*-iso8859-1" to type FontStruct
    Here are the full traces:
    java.lang.NoClassDefFoundError
         at com.sun.tools.swdev.sunstudio.redirect.CESRedirector.getBestPath(CESRedirector.java:103)
         at com.sun.tools.swdev.sunstudio.redirect.CESRedirector.redirect(CESRedirector.java:66)
         at org.openide.text.CloneableEditorSupportRedirector.findRedirect(CloneableEditorSupportRedirector.java:50)
         at org.openide.text.CloneableEditorSupport.getLineSet(CloneableEditorSupport.java:932)
         at com.sun.tools.debugger.dbxgui.utils.IpeUtils.lineNumberToLine(IpeUtils.java:96)
         at com.sun.tools.debugger.dbxgui.debugger.EditorBridge.getLine(EditorBridge.java:277)
         at com.sun.tools.debugger.dbxgui.debugger.breakpoints.NativeBreakpoint.addAnnotation(NativeBreakpoint.java:1516)
         at com.sun.tools.debugger.dbxgui.debugger.breakpoints.BreakpointXMLCodec.startElement(BreakpointXMLCodec.java:161)
         at org.netbeans.modules.cnd.api.xml.XMLDecoder._startElement(XMLDecoder.java:87)
         at org.netbeans.modules.cnd.api.xml.XMLDecoder.checkStartRecursion(XMLDecoder.java:104)
         at org.netbeans.modules.cnd.api.xml.XMLDecoder._startElement(XMLDecoder.java:84)
         at org.netbeans.modules.cnd.api.xml.XMLDecoder.checkStartRecursion(XMLDecoder.java:104)
         at org.netbeans.modules.cnd.api.xml.XMLDecoder._startElement(XMLDecoder.java:84)
         at org.netbeans.modules.cnd.api.xml.XMLDocReader$Parser.startElement(XMLDocReader.java:233)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:533)
         at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:220)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:872)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1693)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:368)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:834)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:764)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1242)
         at org.netbeans.modules.cnd.api.xml.XMLDocReader.read(XMLDocReader.java:111)
         at com.sun.tools.debugger.dbxgui.debugger.breakpoints.BreakpointXMLReader.readFrom(BreakpointXMLReader.java:36)
         at com.sun.tools.debugger.dbxgui.debugger.UserdirFile.read(UserdirFile.java:105)
         at com.sun.tools.debugger.dbxgui.debugger.breakpoints.BreakpointXMLReader.read(BreakpointXMLReader.java:30)
         at com.sun.tools.debugger.dbxgui.debugger.breakpoints.BreakpointBag.restore(BreakpointBag.java:322)
         at com.sun.tools.debugger.dbxgui.debugger.DbxDebuggerManager.breakpointBag(DbxDebuggerManager.java:878)
         at com.sun.tools.debugger.dbxgui.DbxGuiModule.restored(DbxGuiModule.java:137)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:366)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:282)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:904)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:383)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:317)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:250)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:210)
         at org.netbeans.core.startup.Main.start(Main.java:381)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:96)
    [catch] at java.lang.Thread.run(Thread.java:595)
    and
    java.lang.UnsatisfiedLinkError: no base in java.library.path
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
         at java.lang.Runtime.loadLibrary0(Runtime.java:822)
         at java.lang.System.loadLibrary(System.java:993)
         at com.sun.tools.swdev.toolscommon.base.InstallDir.loadLibrary(InstallDir.java:85)
         at com.sun.tools.swdev.toolscommon.base.Stat.<clinit>(Stat.java:201)
         at com.sun.tools.swdev.sunstudio.redirect.CESRedirector.getBestPath(CESRedirector.java:103)
         at com.sun.tools.swdev.sunstudio.redirect.CESRedirector.redirect(CESRedirector.java:66)
         at org.openide.text.CloneableEditorSupportRedirector.findRedirect(CloneableEditorSupportRedirector.java:50)
         at org.openide.text.CloneableEditorSupport.setMIMEType(CloneableEditorSupport.java:1190)
         at org.apache.tools.ant.module.loader.AntProjectDataEditor.<init>(AntProjectDataEditor.java:52)
         at org.apache.tools.ant.module.loader.AntProjectDataObject.<init>(AntProjectDataObject.java:43)
         at org.apache.tools.ant.module.loader.AntProjectDataLoader.createMultiObject(AntProjectDataLoader.java:66)
         at org.openide.loaders.MultiFileLoader.handleFindDataObject(MultiFileLoader.java:83)
         at org.openide.loaders.DataObjectPool.handleFindDataObject(DataObjectPool.java:129)
         at org.openide.loaders.DataLoader.findDataObject(DataLoader.java:364)
         at org.openide.loaders.DataLoaderPool.findDataObject(DataLoaderPool.java:408)
         at org.openide.loaders.DataLoaderPool.findDataObject(DataLoaderPool.java:368)
         at org.openide.loaders.DataObject.find(DataObject.java:465)
         at org.netbeans.modules.cnd.makeproject.api.configurations.Item.getDataObject(Item.java:246)
         at org.netbeans.modules.cnd.makeproject.api.configurations.Item.addPropertyChangeListener(Item.java:157)
         at org.netbeans.modules.cnd.makeproject.api.configurations.Item.setFolder(Item.java:152)
         at org.netbeans.modules.cnd.makeproject.api.configurations.Folder.addItem(Folder.java:183)
         at org.netbeans.modules.cnd.makeproject.configurations.ConfigurationXMLCodec.endElement(ConfigurationXMLCodec.java:340)
         at org.netbeans.modules.cnd.api.xml.XMLDecoder.checkEndRecursion(XMLDecoder.java:133)
         at org.netbeans.modules.cnd.api.xml.XMLDecoder._endElement(XMLDecoder.java:92)
         at org.netbeans.modules.cnd.api.xml.XMLDocReader$Parser.endElement(XMLDocReader.java:245)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser.java:633)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XMLDocumentFragmentScannerImpl.java:1241)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1685)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:368)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:834)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:764)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1242)
         at org.netbeans.modules.cnd.api.xml.XMLDocReader.read(XMLDocReader.java:111)
         at org.netbeans.modules.cnd.makeproject.configurations.ConfigurationXMLReader.read(ConfigurationXMLReader.java:86)
         at org.netbeans.modules.cnd.makeproject.api.configurations.ConfigurationDescriptorProvider.getConfigurationDescriptor(ConfigurationDescriptorProvider.java:62)
         at org.netbeans.modules.cnd.makeproject.MakeProject$ProjectOpenedHookImpl.projectOpened(MakeProject.java:496)
         at org.netbeans.spi.project.ui.ProjectOpenedHook$1.projectOpened(ProjectOpenedHook.java:56)
         at org.netbeans.modules.project.ui.OpenProjectList.notifyOpened(OpenProjectList.java:593)
         at org.netbeans.modules.project.ui.OpenProjectList.getDefault(OpenProjectList.java:154)
         at org.netbeans.modules.project.ui.OpenProjectsTrampolineImpl.getOpenProjectsAPI(OpenProjectsTrampolineImpl.java:45)
         at org.netbeans.api.project.ui.OpenProjects.getOpenProjects(OpenProjects.java:81)
         at org.netbeans.modules.cnd.modelimpl.platform.ModelSupport.init(ModelSupport.java:108)
         at org.netbeans.modules.cnd.modelimpl.csm.core.ModelImpl.<init>(ModelImpl.java:57)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
         at java.lang.Class.newInstance0(Class.java:350)
         at java.lang.Class.newInstance(Class.java:303)
         at org.openide.util.lookup.MetaInfServicesLookup$P.getInstance(MetaInfServicesLookup.java:412)
         at org.openide.util.lookup.AbstractLookup.lookup(AbstractLookup.java:342)
         at org.openide.util.lookup.ProxyLookup.lookup(ProxyLookup.java:188)
         at org.netbeans.modules.cnd.api.model.CsmModelAccessor.getModel(CsmModelAccessor.java:139)
         at org.netbeans.modules.cnd.highlight.HighlightProvider.<init>(HighlightProvider.java:69)
         at org.netbeans.modules.cnd.highlight.HighlightProvider.<clinit>(HighlightProvider.java:59)
         at org.netbeans.modules.cnd.highlight.HighlightInstaller.restored(HighlightInstaller.java:32)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:366)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:282)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:904)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:383)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:317)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:250)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:210)
         at org.netbeans.core.startup.Main.start(Main.java:381)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:96)
    [catch] at java.lang.Thread.run(Thread.java:595)

  • Java Exception when attempt to start the SNMP agent

    Hi,
    I require to start the SNMP agent in Solaris 2.6 running Web Logic 5.1. Upon entering
    the command :
    $ java weblogic.SNMPAgent, it is asking me for the password , and I gave the same.
    The system is
    generating a Java Exception given below:
    Exception in thread "main" com.adventnet.snmp.snmp2.agent.AgentRuntimeException:
    Failure in opening SnmpSession, errstat: 0, errvalue: 0
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.lang.RuntimeException.<init>(RuntimeException.java:47)
    at com.adventnet.snmp.snmp2.agent.AgentRuntimeException.<init>(AgentRuntimeException.java:63)
    at com.adventnet.snmp.snmp2.agent.SnmpAgent.addClientAndOpenSession(SnmpAgent.java:801)
    at com.adventnet.snmp.snmp2.agent.SnmpAgent.restartSnmpAgent(SnmpAgent.java:939)
    at com.adventnet.snmp.snmp2.agent.SnmpAgent.restartSnmpAgent(CompiledCode)
    at com.adventnet.snmp.snmp2.agent.SnmpAgent.setPort(Compiled Code)
    at weblogic.management.snmp.agent.WebLogicAgent.init(Compiled Code)
    at weblogic.management.snmp.agent.WebLogicAgent.startup(WebLogicAgent.java:377)
    at weblogic.SNMPAgent.main(SNMPAgent.java:25)
    Given below is the file <startSNMPAgent.sh> and it's central contents:
    $JAVA weblogic.SNMPAgent -password pbgst -serverURLs t3://localhost:7001 -trap
    Destinations localhost:162
    The classpath settings are correct and as per documentation.
    There are SNMP agents also running in the machine which have been started by default
    by Solaris,
    doing a ps -ef | grep snmp shows:
    root 556 1 0 Jun 23 ? 0:00 /usr/lib/dmi/snmpXdmid -s sunhyd01
    root 516 1 0 Jun 23 ? 0:00 /usr/lib/snmp/snmpdx -y -c /etc/snmp/conf
    pbgst 28090 25879 0 17:01:37 pts/32 0:00 grep snmp
    I tried to start the SNMP agent on a diff. port and specified the same in the
    .sh file and also changed the
    trap Destinations port ---- it still generates the same exception.
    Please do try to resolve this problem for me, as the project is in production
    phase.
    Thanks for all help beforehand.
    Baivab
    P.S. How can I obtain the id for WebSupport center, as we have using WL licensed
    product
    recently purchased in 3 nos.

    Hello,
    way back we had the same problem and the reason was, that the path
    names with the server instances were to long
    (/opt/wlsroot/wlsInstances/axsExpert.SwissAir/S_243_7001 ->
    /opt/wlsroot/wlsInstances/axsExpert.SAir/S_243_7001). But this was
    with WLS 5.1 SP8.
    Regards
    Wolfgang Becker
    Atraxis
    On 9 Jul 2001 23:02:29 -0800, "Baivab Mitra"
    <[email protected]> wrote:
    >
    Hello Michel,
    Thanks for the reply. As you may have noticed, that the SNMP agents which are
    already running, the owner is <root>. These services are required and I do not
    have or I can not obtain the password to start/stop the same. As such, the only
    option which I have is to start the weblogic-specific SNMP service in a different
    port. Question: In the parameters, I specified : <snmpPort 1600 trace Destinations
    1601> I am still getting the same error. What else is required and/or how do I
    proceed to start the same service?
    Thanks for your help beforehand,
    Baivab
    "Michael Girdley" <----> wrote:
    It looks like another SNMP agent has already bound to the port.
    Michael Girdley
    BEA Systems
    Learning WebLogic? http://learnweblogic.com
    "Baivab Mitra" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    I require to start the SNMP agent in Solaris 2.6 running Web Logic5.1.
    Upon entering
    the command :
    $ java weblogic.SNMPAgent, it is asking me for the password , and Igave
    the same.
    The system is
    generating a Java Exception given below:
    Exception in thread "main"com.adventnet.snmp.snmp2.agent.AgentRuntimeException:
    Failure in opening SnmpSession, errstat: 0, errvalue: 0
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.lang.RuntimeException.<init>(RuntimeException.java:47)
    atcom.adventnet.snmp.snmp2.agent.AgentRuntimeException.<init>(AgentRuntimeExce
    ption.java:63)
    atcom.adventnet.snmp.snmp2.agent.SnmpAgent.addClientAndOpenSession(SnmpAgent.j
    ava:801)
    atcom.adventnet.snmp.snmp2.agent.SnmpAgent.restartSnmpAgent(SnmpAgent.java:939
    atcom.adventnet.snmp.snmp2.agent.SnmpAgent.restartSnmpAgent(CompiledCode)
    at com.adventnet.snmp.snmp2.agent.SnmpAgent.setPort(CompiledCode)
    at weblogic.management.snmp.agent.WebLogicAgent.init(CompiledCode)
    atweblogic.management.snmp.agent.WebLogicAgent.startup(WebLogicAgent.java:377)
    at weblogic.SNMPAgent.main(SNMPAgent.java:25)
    Given below is the file <startSNMPAgent.sh> and it's central contents:
    $JAVA weblogic.SNMPAgent -password pbgst -serverURLst3://localhost:7001 -trap
    Destinations localhost:162
    The classpath settings are correct and as per documentation.
    There are SNMP agents also running in the machine which have been startedby default
    by Solaris,
    doing a ps -ef | grep snmp shows:
    root 556 1 0 Jun 23 ? 0:00 /usr/lib/dmi/snmpXdmid-s
    sunhyd01
    root 516 1 0 Jun 23 ? 0:00 /usr/lib/snmp/snmpdx -y-c
    /etc/snmp/conf
    pbgst 28090 25879 0 17:01:37 pts/32 0:00 grep snmp
    I tried to start the SNMP agent on a diff. port and specified the samein
    the
    sh file and also changed the
    trap Destinations port ---- it still generates the same exception.
    Please do try to resolve this problem for me, as the project is inproduction
    phase.
    Thanks for all help beforehand.
    Baivab
    P.S. How can I obtain the id for WebSupport center, as we have usingWL
    licensed
    product
    recently purchased in 3 nos.

  • Weblogic 8.1 for solaris x86 download

    hi, i'm looking for weblogic 8.1 for solaris x86, where i can download the files?
    thanks

    hey thanks for the reply, sorry for my late response, well last time i was found the archive of all BEA Release Product with metalink account, i was downloaded the weblogic 8.1 SP4 for solaris x86.. the installation seems fine, until i try to create the domain.. here is my step installation
    -bash-3.00$ ./config.sh
    Java Accessibility Bridge for GNOME loaded.
    Unable to instantiate GUI, defaulting to console mode.
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Create or Extend a Configuration:
    Choose between creating and extending a configuration. Based on your selection, the Configuration Wizard guides you through the steps to generate a new or
    extend an existing configuration.
    ->1|Create a new WebLogic configuration
    | Start here to create a WebLogic configuration in your projects
    |directory.
    2|Extend an existing WebLogic configuration
    | Start here to extend an existing WebLogic configuration. Use this
    |option to add applications and services, including Database access (JDBC)
    |and Messaging (JMS). This option also enables you to extend functionality
    |by enabling WebLogic Workshop.
    Enter index number to select OR [Exit][Next]> 1
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Select a Domain Template:
    Please select a template from the list or select another directory of templates.
    * [wildsoft/oracle/weblogic81/common/templates/domains]
    1|Basic WebLogic Workshop Domain 8.1.4.0
    | BEA Systems, Inc.
    | Create a basic WebLogic Workshop domain, without installing sample
    |applications. Domains created from this template will support the
    |WebLogic Server and WebLogic Workshop runtime functionality, including
    |support for J2EE applications, Web applications, Web Services and custom
    |controls. Use domains created from this template for development of
    |WebLogic Workshop applications.
    ->2|Basic WebLogic Server Domain 8.1.4.0
    | BEA Systems, Inc.
    | Create a basic WebLogic Server domain without installing sample
    |applications.
    3|WebLogic Server Examples Domain 8.1.4.0
    | BEA Systems, Inc.
    | Create the WebLogic Server Examples domain in a directory outside of the |installed kit. The Examples domain contains a collection of examples to
    |show best practices for coding individual J2EE APIs.
    4|Avitek Medical Records Sample Domain 8.1.4.0
    | BEA Systems, Inc.
    *Enter index number to select OR [Down][Exit][Previous][Next]> 2*
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Choose Configuration Option:
    *Do you want to run the wizard in express mode?
    ->1|Yes
    2|No
    *Enter option number to select OR [Exit][Previous][Next]> 1*
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Configure Administrative Username and Password:
    Create a user automatically assigned to the Administrative Role. This user is
    the default administrator used to start development mode servers.
    | Name | Value |
    _|_________________________|_________________________________|
    1| *User name:       |            weblogic             |
    2| *User password:     |                                 |
    3| *Confirm user password: |                                 |
    4| Description: | The default administration user |
    Select Option:
    1 - Modify "User name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    *Enter option number to select OR [Exit][Previous][Next]> 2*
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Configure Administrative Username and Password:
    Create a user automatically assigned to the Administrative Role. This user is
    the default administrator used to start development mode servers.
    "*User password:" = []
    Input new User password: OR [Exit][Reset][Accept]> weblogic1*
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Configure Administrative Username and Password:
    Create a user automatically assigned to the Administrative Role. This user is
    the default administrator used to start development mode servers.
    | Name | Value |
    _|_________________________|_________________________________|
    1| *User name:       |            weblogic             |
    2| User password:     |            ******** |
    3| *Confirm user password: |                                 |
    4| Description: | The default administration user |
    Select Option:
    1 - Modify "User name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes
    *Enter option number to select OR [Exit][Previous][Next]> 3*
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Configure Administrative Username and Password:
    Create a user automatically assigned to the Administrative Role. This user is
    the default administrator used to start development mode servers.
    "*Confirm user password:" = []
    Input new Confirm user password: OR [Exit][Reset][Accept]> weblogic1*
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Configure Administrative Username and Password:
    Create a user automatically assigned to the Administrative Role. This user is
    the default administrator used to start development mode servers.
    | Name | Value |
    _|_________________________|_________________________________|
    1| *User name:       |            weblogic             |
    2| User password:     |            ******** |
    3| Confirm user password: |            ******** |
    4| Description: | The default administration user |
    Select Option:
    1 - Modify "User name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes
    *Enter option number to select OR [Exit][Previous][Next]>next*
    <--------------------- BEA WebLogic Configuration Wizard --------------------->
    Domain Mode Configuration:
    Enable Development or Production Mode for this domain.
    ->1|Development Mode
    2|Production Mode
    *Enter index number to select OR [Exit][Previous][Next]> 1*
    A fatal error has occured.  This application will terminate.

  • Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

    Greetings, all.
    Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
    # mount -F nfs x.x.x.x:/f /mnt
    nfs mount: x.x.x.x: : RPC: Program not registered
    nfs mount: retrying: /mnt
    # mount -F hsfs x.x.x.x:/f /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/f
    # mount -F hsfs x.x.x.x:/F /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/F
    [FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
    # mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
    # mount -F hsfs x.x.x.x:/s10_106_software /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/s10_106_software
    # mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
    nfs mount: x.x.x.x: : RPC: Program not registered
    nfs mount: retrying: /mnt
    # mount -F nfs x.x.x.x:/s10_106_software /mnt
    nfs mount: x.x.x.x: : RPC: Program not registered
    nfs mount: retrying: /mnt
    # mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/f/s10_106_software
    # mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/F/s10_106_software
    # mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
    # mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
    I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

    After three weeks, you deserve a reply. Windoze does
    not natively support NFS.Also deserves a decent answer...
    There are two ways to do this:
    Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
    Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

Maybe you are looking for