SMD Agent Configuration Wizard for CI and DB host

Hi, I have to config the CI host in /smd > managed systems > setup wizard. But what is with my agends from other hosts then CI like DB host? Do I have to do somthing else with the Agents from this hosts? At the moment this agens have the status <no server name> in smd/go/ADMIN_AGENT

Hello,
After you connect the agents to the Solution Manager they will appear as No Server Name in Agent Administration.
Run the setup wizard for the managed system, select the agent before processing further. This will assign the agent to a server name.
Best regards,
Guilherme

Similar Messages

OOT: Configuration Wizard for Business One (Tools)

Hi All,
Do you have any idea to download "configuration wizard for business one tools" ? I've try download it, but unfortunately the connection suddenly terminated.
Somebody like to share?
Thanks and regards
(the tools is taken from download menu from this forum)
Edited by: Susanne Klemm on May 7, 2008 1:51 PM
Edited by: Philip Eller on May 21, 2008 9:02 AM

Hi,
Did you try this link?
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/sdn/go/portal/prtroot/docs/library/uuid/1099ac47-4c73-2a10-69af-d11b130cc68a
Regards,
Paul SAP Business One Forums Team

Configuration documents for Training and event management &apprisals?

hello xperts
can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

Hello Experts,
Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
Any link or material for reading, please let me know.
Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
Regards
Vinod Chincholkar

Hi Vinod,
i hope you can find the details in this link,
you can download the sloution overview brochure...
http://www.sap.com/industries/oil-gas/small/index.epx.
Best Regards
Satish

How to configure ODI for server and client correct?

Hi forum,
this is my first post and i hope you guys can help me out ...
i
am new to ODI and WLS and in my case ODI need to run on a server where a couple of clients can connect to, work on the same project with their own workspaces and accounts.
The database will be located on the same server.
As far as i understood, i need to install the the ODI Java EE type (not the standalone type) with a WLS ?!
iI already nstalled
JDK 6u41 (x64),
ODI 11g (11.1.1.6, generic),
Oracle DB 11g R2 enterprise and
WebLogic 11g (10.3.6, generic)
on the Server and now i am trying to connect to the ODI repositories from a client with an ODI standalone installation.
I am now trying to insert a Data Source into the physical agemt (not even sure if i need to do this in my case).
Following these instructions (http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/setup_topology.htm#CHDHJBAD) i get an ODI-26029 error.
Below are some configuration information of the software i installed.
h3. ODI
Installation:
Installationtype: full
Oracle home directory: Oracle_ODI1
Agent name: odi_agent
Agent port: 1987
Repositories/connection:
Master repository user = odim
Work repository user = odiw
Work repository name = WORKREP1
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
*odim and odiw have been created manually with grant options on connect and resource
Physical agent (with no datasource defined):
Name = OracleDIAgent
Host = localhost
Webapplicationcontext = oraclediagent
Port = 8001
Protocol = http
Physical data server:
Name = oracle_db_11gr2
User = odiw
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
Physical schema:
Schema (schema) = ODIW
Schema (work schema) = ODIW
Context = aMIS_dev
Logical schema = oracle_db_11gr2
Logiacal schema
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Context:
Name = aMIS_dev
Logical agent = OracleDIAgent
Physical agent = OracleDIAgent
Logical schema = oracle_db_11gr2
Physical schema = oracle_db_11gr2.ODIW
Logical schema:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Logical agent
Name = OracleDIAgent
Context = aMIS_dev
Physical Agent = OracleDIAgent
h3. Oracle DB 11g R2
Installation
Global database name = orcl.otera.local
SID = orcl
h3. WebLogic 11g:
+1. generate new basic WebLogic Server domain+
Domainname = ODI-DOMAIN
Admin name = weblogic
Admin server name = AdminServer
Listening port = 7001
Managed server name = odi_server1
Managed server port = 8001
+2. extend an existing WebLogic domain+
Choose extension source: ODI - Agent, ODI - Agent Libraries, Oracle JRF
Window: Configure JDBC compontent schema:
Driver = Oracle's Driver (Thin) for Instance connection; Versions: 9.0.1 and higher
Schema owner = odim
DBMS/Service = orcl
Hostname = localhost
Port = 1521
Client name = LocalODIMachine
Listening address of the accountmanager = localhost
Listening port of the accountmanager = 5556
Really hope you guys can help me quick.
Thanks in advance

Hi DecaXD,
thank you for quick response :)
on the client site i tried to establish the connection to the work repository with the following connection information:
Login information*:
Oracle Data Integrator Connection
Login name = odi_server
User = SUPERVISOR
Database connection (Master Repository):
User = odim
URL = jdbc:oracle:thin:@<server ip>:1521:orcl
A work repository could be found, but the connection failed! (?!)
" ODI-26130: Connection to the repository failed.
oracle.odi.core.config.NotWorkRepositorySchemaException: ODI-10147: Repository type mismatches.
Could not get JDBC Connection; nested exception is java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Invalid SQL-Query for validating the connection (+translated from german into english+) "
my ODI configuration on the server site (loged in as: odiw):
topology tab*:
Physical architecture:
Technology:
Definition:
Dataserver name = oracle_db_11gr2
User = odiw
JDBC-URL = jdbc:oracle:thin:@10.168.178.131:1521:orcl
Datasource:
Agent = OracleDIAgent
JNDI-Name = [DataSourceName]
Agents:
Definition:
Name = OracleDIAgent
Host = <IP of the server>
Port = 8001
Webapplicationcontext = oraclediagent
Datasources:
Dataserver = oracle_db_11gr2
JNDI-Name = [DataSourceName]
Logical architecture:
Technology:
Defintion:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Agent:
Name = OracleDIAgent
Context = aMIS_dev
Physical agent = OracleDIAgent
when i test the connection of the data server (topology>physical architecture>technology>oracle>oracle_db_11gr2) with the OracleDIAgent i receive the
" ODI-26039: Connection failed.
oracle.odi.runtime.agent.invocation.InvocationException: javax.naming.NameNotFoundException: Unable to resolve '[DataSourceName]'. Resolved ''; remaining name '[DataSourceName]' "
since testing the connection on the server site failed in first place, i couldn't test the connection on the client site.

Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm

Hi All,
I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
Failed to create the configuration database.
An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information: The given key was not present in the dictionary.
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
Any ideas why this is happening?

Hello together,
I get the same error mentioned above while running the configuration wizard.
My Serverenvironment:
- MS Server 2008 R2 Enterprise
- Virtual Machine (Host Machine also R2 Enterprise)
- SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
- Prerequisites installed without error (and current versions)
Error information:
"Failed to create the configuration database"
"An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
The given key was not present in the dictionary"
The logfile has the following entry:
7/2009 10:52:48 9 ERR                    Task configdb has failed with an unknown exception
12/07/2009 10:52:48 9 ERR                    Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
   at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
   at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
   at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
   at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
   at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
   at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
   at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
   at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Any suggestions?
Thanks
Christoph

Import error while running configuration wizard for ESR setup

Hi, I am trying for this for last two days. but not able solve this.
I am getting the error at the final stage of the configuration
Error message is below
Importing XI content
Description
Exception in step "INVOKEIMPRTCNTNT"
Exception details : com.sap.aii.util.misc.api.ResourceException: Connection to system Integration Builder using application CMS-Transport lost. Detailed information: Error accessing "http://INLD50046921A:50000/rep/cmstransport/int?" with user "ESRCMSCE1". Response code is 500, response message is "Internal Server Error"
I tried two or three times I got the same error then i canceled.
Now I am not able to start the configuration process gain.
Any body who has completed the configuration process please help me in this.
Regards
Satya

Hi,
I think the problem can be solved by downloading from the marketplace and importing the content manually.
Here is a description of the process:
http://help.sap.com/saphelp_nwesrce/helpdata/en/44/5755451622311ee10000000a155369/content.htm
The exception was because we didnt have the needed files (correct me if I am wrong) (The import can be done before or after running the configuration wizard)
Best regards,
V S

What tasks I should select in NWA Configuration Wizard for PI component

Hello,
I'm in the stage of setting up the NetWeaver 2004S SR2. I've logged to the Net Weaver Administration console. According to documentation, to properly configure PI component I should execute Configuration Wizard task. The problem is that documentation is not very specific on what exact tasks I should execute, so I would like to get some advise from the community.
All tasks I can see are:
BI_00_This wizard will execute Postinstall steps of technical configuration of BI-Java Initial
DI_Allinone_This wizard run all post installation steps for DI, CBS, CMS and DTR. Initial
DI_CBS_This wizard run all post installation steps for CBS. Initial
DI_CMS_This wizard run all post installation steps for CMS. Initial
DI_DTR_This wizard run all post installation steps for DTR.
DI_This wizard sets the Oracle Parameters as per CSN note: 848708 Initial
MI_00_This wizard will execute Postinstall steps of technical configuration for the NetWeaver Mobile Infrastructures
MI_01_This wizard will create User and Assign Dedicated roles for the NetWeaver Mobile Infrastructure Initial
MI_02_create JCo Initial
MI_03_create TCP/IP
MI_04_register Connection Initial
MI_05_set profile in ABAP Initial
MI_06_schedule MI Job Initial
NWA_01_This wizard will execute configuration for local SLD Initial
NWA_02_SLD system : Connect SLD to CEN (if CEN present)
NWA_03_Creating a connection to the SLD and Setting required authorizations for SLD (CIM client settings)
NWA_04_Creating a connection to the ABAP stack of CEN and Starting heartbeat monitoring Initial
NWA_05_NWA system : Store access data per each managed Java system (optional) Initial
NWA_06_NWA system : Register each managed ABAP system to SLD Initial
NWA_07_creates Destination for Data Supplier Bridge
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Initial
PI_01_This template checks if the necessary services are started Initial
PI_02_This wizard will test the BAPI call to SWF_XI_BPM_AUTO_CUSTOMIZE Initial
PI_03_This wizard will assign the Application roles Initial
PI_04_This wizard will Maintain_Technical_System
PI_05_This wizard will configure the integration server for sld Initial
PI_06_This wizard will create the necessary Destinations in ABAP Initial
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server Initial
PI_10_This wizard will Register_Queues_NA Initial
PI_11_This template services are started
I guess I need to mandatory execute PI_XX tasks, but what about others - do I need to execute anything else (I need only PI component to be installed and configured)? Not sure if that makes any difference, but this is the very first time I get into the NWA, so no previous configuration tasks were executed from the Configuration Wizard.
My full system configuration: NetWeaver 2004S SR2 ABAP+Java, Windows 2003 32-bit with MS SQL Server 2005.
Thanks in advance.

Hi Maxim,
Please follow this procedure:
1) Using Config tool Modify VM setting as per requirement (OS and H/W Dependent) Refer note 723909 Java VM settings for J2EE 6.40/7.0.
2) To set Environmental Variable refer Note 314530 - Number of RFC/CPIC connections for external clients. These parameter should be taken care while installing templates
Set these:
     1) gw/max_conn 2000
     2) gw/max_sys 1200
     3) gw/max_overflow_size 40000000
     4) gw/max_shm_req 200 (this is to adjust the memory   allocation)
Profile parameters
rdisp/tm_max_no 5000
rdisp/max_comm_entries 200
ITS
CPIC_MAX_CONV 5000(Should be taken care that it should be set for <sid>adm user
3) Installing Template
Go to home page
http://hostname:portnumber/webdynpro/dispatcher/
Click Deploy and change
4) After This Click Configuration tab and then click Install
For the next tab select scenario PI
And configure template and finally install
5) In case you face any problem while importing please read these notes for altering parameters
Note 314530 - Number of RFC/CPIC connections for external clients
Note 923359 - Collective Note: Configuration Wizard - Template Installer
Hope it will Help you at this stage at development stage
You need to import SAP BASIS Software Component Version into Integration Repository based on your SP Level & XI or PI.
You need to download it from [service market place.|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ]
Regards,
Gagan Deep Kaushal

Errors in few of the step while running configuration wizard for PI 7.0

hi all,
i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
now in this i got error in few steps:
STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
the error was: CIM_ERR_FAILED: Object manager is not activated
PI_05_This wizard will configure the integration server for sld.
The error was:
Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
PI_09_This wizard will configure Role of Integration server
Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
What should i do?
Regards,
Priyanshu Srivastava

Hi Priyanshu,
"Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
Regards,
Blanca

Process Orchestration - Configuration Wizard "Process Integration and Orchestration Package" shows running

Hi SAP Gurus,
I have installed an SAP PO system and am running the Config Wizard from NWA. The functional unit I have selected from NWA is - "Process Integration and Orchestration Package". This functional unit has in turn selected few more functional units like AEX, SLD. The issue that I am facing is that the wizard does not appear for my inputs and it shows that the selected wizards are running. Please see attachment "config_wizard_running.jpeg"
I read some forums and found a thread where in it was mentioned how to stop the config wizard and restart it. http://scn.sap.com/thread/1422958
Even after restarting my server, the functional units are still showing as running in NWA --> Configuration --> Scenarios --> Configuration Wizard --> Functional Unit Configuration UI. Please see attachment "Config_wizard_stuck.jpeg"
I restarted the application as suggested in the post so that I could run Config Wizard again. But its now allowing me to start it as the status is Running.
Please suggest.
Regards,
Amit

Hi Dimitri,
Thanks a lot. I have resetted the functional units. This time the wizard comes up ok.
Regards,
Amit

Configuration steps for Quality and Batch Management.

Hi Friends,
We are implementing QM along with Batch Management for testing the material like purity,pathology tests.
I am new to Quality and Batch Management.
Could any one guide me, how to configure material master for QM and Batch to test the material?.
Thanks

1) Maintain Material with Classification and Quality Management view
2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
3) Create Quality Info Record(QI01)
4) In PO the stock automatically goes to Quality stock.
5) Check MMBE stock
6) Do Result Recording and Usage Decision(QA32)
7) Check stock (MMBE).
There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to Requirement(purity...etc).
Regards,
eswarmanu...
Edited by: eswarmanu on Oct 21, 2008 7:09 PM

Configuring WCCP for http and https

How do I configure wccp on a 6509 to redirect http and https trafic to a S650. I am using the following config and http is working fine:
ip wccp version 2
ip wccp web-cache redirect-list aclwccp
interface Vlan23
description Rede Firewall
ip address 10.0.23.20 255.255.255.0
ip access-group 172 out
ip wccp web-cache redirect out
mls rp vtp-domain coc_block1
mls rp ip
mls netflow sampling
end
Should I config an other service for the https protocol?

Cecato,
The WSA can be configured to send 80 and 443 traffic, in the WCCP settings area (5.2.0+). There are some things you will need to be aware of before doing this though:
1. If you are on 5.2.0-x, you will not be able to inspect HTTPS traffic. Only version 5.5.0+ has the ability to decrypt HTTPS traffic. Because of this, it is not recommended to redirect port 443 on WSA version 5.2.
2. You will most likely need to specify a service ID other then web-cache. On most Cisco devices, web-cache is reserved for port 80 traffic only and cannot be changed. Any other service ID will work as you want it to.

NAC Agent only prompts for username and login on wireless

Another question for the smart people of the world.
I have had a couple laptops where the cisco NAC agent will prompt for a password and verify the computer via the wirless network but when I try to do that on the wired network, it sends me to the download page for the NAC agent. It doesnt seem to register that the NAC agent is installed and working even though it is.
Any thoughts?
Thanks

Hi Jonathan,
The NAC agent communicates with the CAS usiing the SWISS protocol. This protocol uses port 8095 for L2 adjacent devices to the CAS and 8096 protocol for L3 adjacent devices to the CAS. Have you checked if these ports are allowed through to the CAS for the wired clients? Do check the support logs on the CAM and CAS suggest something. If you can post the agent logs from the wired clients I could analize and let you know where the process is failing.
Do let me know if this helps.
Regards,
Som

Configuration Guide for 6248 and 5548 and VNX 5500

Hi,
Need help here to configure the FCoE Uplink + Ethernet Uplink in Port channel
Following is the connectivity details from 6248, 5548 and VNX5500.
I have configured Port Channel in following way on Both Fabric Interconnect
After Configuring above things I am getting following Faults on Servers
For NetApp3240 ENM source pinning failed, I have allowed VLAN ID 21 in Uplink manager then too this Link state is not showing UP and Same thing go for both FC_vHBA
Kinldy help me to configure the setup
-Amit

Below is the ouput for two commands "show run int port-channel membership" and "sh int port-channel "
===========================================================================
primary# sh run int po2 membership
!Command: show running-config interface port-channel2 membership
!Time: Wed Feb 25 07:55:31 2009
version 5.2(1)N1(1b)
interface port-channel2
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/3
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/4
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/5
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
===========================================================================
primary# sh run int po3 membership
!Command: show running-config interface port-channel3 membership
!Time: Wed Feb 25 07:57:14 2009
version 5.2(1)N1(1b)
interface port-channel3
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/8
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/9
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/10
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
===========================================================================
primary# sh int po2
port-channel2 is up
Hardware: Port-Channel, address: 002a.6a0a.4caa (bia 002a.6a0a.4caa)
Description: ***Link to FI-A in R17***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/3, Eth1/4, Eth1/5
Last clearing of "show interface" counters never
30 seconds input rate 504 bits/sec, 0 packets/sec
30 seconds output rate 2256 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 456 bps, 0 pps; output rate 656 bps, 0 pps
RX
    22208045 unicast packets 747374 multicast packets 27634234 broadcast packets
    50589653 input packets 49083144072 bytes
    21411174 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    2801196 unicast packets 353162904 multicast packets 549464 broadcast packets
    356513564 output packets 25978572978 bytes
    101325 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
35 interface resets
===========================================================================
primary# sh int po3
port-channel3 is up
Hardware: Port-Channel, address: 002a.6a0a.4caf (bia 002a.6a0a.4caf)
Description: ***Link to FI-B in R18***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 48052/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/8, Eth1/9, Eth1/10
Last clearing of "show interface" counters never
30 seconds input rate 104 bits/sec, 0 packets/sec
30 seconds output rate 1704 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 448 bps, 0 pps; output rate 1.08 Kbps, 0 pps
RX
    9070 unicast packets 288523 multicast packets 143322 broadcast packets
    440915 input packets 72677230 bytes
    7 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 36 CRC 0 no buffer
    2161727821137838086 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    62914 unicast packets 74425404 multicast packets 14434365 broadcast packets
    88922683 output packets 7182753461 bytes
    14 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
17 interface resets
===========================================================================
secondary# sh run int po2 mem
!Command: show running-config interface port-channel2 membership
!Time: Wed Feb 25 07:56:41 2009
version 5.2(1)N1(1b)
interface port-channel2
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/8
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/9
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/10
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
===========================================================================
secondary# sh run int po3 mem
!Command: show running-config interface port-channel3 membership
!Time: Wed Feb 25 07:58:30 2009
version 5.2(1)N1(1b)
interface port-channel3
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/3
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/4
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/5
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
===========================================================================
secondary# sh int po2
port-channel2 is up
Hardware: Port-Channel, address: 002a.6a0a.4d6f (bia 002a.6a0a.4d6f)
Description: ***Link to FI-A in R17***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/8, Eth1/9, Eth1/10
Last clearing of "show interface" counters never
30 seconds input rate 1752 bits/sec, 0 packets/sec
30 seconds output rate 1016 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 832 bps, 0 pps; output rate 496 bps, 0 pps
RX
    76009142 unicast packets 544440 multicast packets 228999 broadcast packets
    76782581 input packets 146179423660 bytes
    68566412 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    192711593 unicast packets 154928956 multicast packets 31420967 broadcast packets
    379061516 output packets 385914168860 bytes
    179761364 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
24 interface resets
===========================================================================
secondary# sh int po3
port-channel3 is up
Hardware: Port-Channel, address: 002a.6a0a.4d6a (bia 002a.6a0a.4d6a)
Description: ***Link to FI-B in R18***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/3, Eth1/4, Eth1/5
Last clearing of "show interface" counters never
30 seconds input rate 456 bits/sec, 0 packets/sec
30 seconds output rate 1784 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 456 bps, 0 pps; output rate 912 bps, 0 pps
RX
    75986748 unicast packets 490267 multicast packets 124569 broadcast packets
    76601584 input packets 146159548726 bytes
    68566413 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    192585042 unicast packets 190939131 multicast packets 13399201 broadcast packets
    396923374 output packets 386206869311 bytes
    179761514 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
24 interface resets
===========================================================================
We have removed vPC configuration as we are facing same problem as i said in my previous post
id     Port        Status Consistency Reason                     Active vlans
2      Po2         up     failed      vpc port channel           -
                                      mis-config due to vpc
                                      links in the 2 switches
                                      connected to different
                                      partners
Do let me know if anything else is required from my end
-amit

SMD Agent Configuration Wizard for CI and DB host

Similar Messages

Maybe you are looking for