SMD Installation Error in Managed Systems

We are installing SMD 7.11 in all our managed systems running on Aix 6.1, we are able to install in all the systems except one, which gives the error at the below step.
SAPVM.log
$ cat SAPVM.log
SAPCAR: processing archive /sapinst_sm/smd/SMD711_01_IM_AIX_PPC64/COMMON/INSTALL/SAPVM.SAR (version 2.01)
x sapjvm_5
x sapjvm_5/jre
x sapjvm_5/jre/bin
x sapjvm_5/jre/bin/java
x sapjvm_5/jre/bin/keytool
x sapjvm_5/jre/bin/policytool
x sapjvm_5/jre/bin/kinit
x sapjvm_5/jre/bin/klist
x sapjvm_5/jre/bin/ktab
x sapjvm_5/jre/bin/rmiregistry
x sapjvm_5/jre/bin/rmid
x sapjvm_5/jre/bin/tnameserv
x sapjvm_5/jre/bin/orbd
x sapjvm_5/jre/bin/servertool
x sapjvm_5/jre/bin/unpack200
x sapjvm_5/jre/bin/pack200
x sapjvm_5/jre/lib
x sapjvm_5/jre/lib/applet
x sapjvm_5/jre/lib/ppc64
x sapjvm_5/jre/lib/ppc64/server
x sapjvm_5/jre/lib/ppc64/server/libjvm.so
SAPCAR: checksum error in sapjvm_5/jre/lib/ppc64/server/libjvm.so (error 12). No such file or directory
$
sapinst_dev.log
INFO       2011-11-21 13:46:11.588
           CJSlibModule::writeInfo_impl()
Output of /tmp/sapinst_exe.13631492.1321899048/SAPCAR -x -v -i -f /sapinst_sm/smd/SMD711_01_IM_AIX_PPC64/COMMON/INSTALL/SAPVM.SAR, sapjvm_5:
SAPCAR: processing archive /sapinst_sm/smd/SMD711_01_IM_AIX_PPC64/COMMON/INSTALL/SAPVM.SAR (version 2.01)
x sapjvm_5
x sapjvm_5/jre
x sapjvm_5/jre/bin
x sapjvm_5/jre/bin/java
x sapjvm_5/jre/bin/keytool
x sapjvm_5/jre/bin/policytool
x sapjvm_5/jre/bin/kinit
x sapjvm_5/jre/bin/klist
x sapjvm_5/jre/bin/ktab
x sapjvm_5/jre/bin/rmiregistry
x sapjvm_5/jre/bin/rmid
x sapjvm_5/jre/bin/tnameserv
x sapjvm_5/jre/bin/orbd
x sapjvm_5/jre/bin/servertool
x sapjvm_5/jre/bin/unpack200
x sapjvm_5/jre/bin/pack200
x sapjvm_5/jre/lib
x sapjvm_5/jre/lib/applet
x sapjvm_5/jre/lib/ppc64
x sapjvm_5/jre/lib/ppc64/server
x sapjvm_5/jre/lib/ppc64/server/libjvm.so
SAPCAR: checksum error in sapjvm_5/jre/lib/ppc64/server/libjvm.so (error 12). No such file or directory
TRACE      2011-11-21 13:46:11.590
FSPath(/tmp/sapinst_exe.13631492.1321899048/SAPCAR) done
TRACE      2011-11-21 13:46:11.590
ChildApplication(/tmp/sapinst_exe.13631492.1321899048/SAPCAR).getReturnCode(true)
TRACE      2011-11-21 13:46:11.591 [syuxctask.cpp:560]
           CUnixProcessManager::waitpid(pid_t pid, int * pStatus, int options)
           lib=syslib module=syslib
Child process 22151394 returned 12
TRACE      2011-11-21 13:46:11.592
FSPath(/tmp/sapinst_exe.13631492.1321899048/SAPCAR) done
TRACE      2011-11-21 13:46:11.592
ChildApplication(/tmp/sapinst_exe.13631492.1321899048/SAPCAR).getReturnCode() done: 12
TRACE      2011-11-21 13:46:11.593
FSPath(/tmp/sapinst_exe.13631492.1321899048/SAPCAR) done
TRACE      2011-11-21 13:46:11.594
ChildApplication(/tmp/sapinst_exe.13631492.1321899048/SAPCAR).getStatus()
TRACE      2011-11-21 13:46:11.595
FSPath(/tmp/sapinst_exe.13631492.1321899048/SAPCAR) done
TRACE      2011-11-21 13:46:11.595
ChildApplication(/tmp/sapinst_exe.13631492.1321899048/SAPCAR).getStatus() done: TST_FINISHED
TRACE      2011-11-21 13:46:11.596
FSPath(/tmp/sapinst_exe.13631492.1321899048/SAPCAR) done
TRACE      2011-11-21 13:46:11.596
Returncode of /tmp/sapinst_exe.13631492.1321899048/SAPCAR: 12
TRACE      2011-11-21 13:46:11.597
FSPath(/tmp/sapinst_exe.13631492.1321899048/SAPCAR) done
ERROR      2011-11-21 13:46:11.598
           CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "/tmp/sapinst_exe.13631492.1321899048/SAPCAR -x -v -i -f /sapinst_sm/smd/SMD711_01_IM_AIX_PPC64/COMMON/INSTALL/SAPVM.SAR, sapjvm_5" finished with return code 12. Output:
SAPCAR: processing archive /sapinst_sm/smd/SMD711_01_IM_AIX_PPC64/COMMON/INSTALL/SAPVM.SAR (version 2.01)
x sapjvm_5
x sapjvm_5/jre
x sapjvm_5/jre/bin
x sapjvm_5/jre/bin/java
x sapjvm_5/jre/bin/keytool
x sapjvm_5/jre/bin/policytool
x sapjvm_5/jre/bin/kinit
x sapjvm_5/jre/bin/klist
x sapjvm_5/jre/bin/ktab
x sapjvm_5/jre/bin/rmiregistry
x sapjvm_5/jre/bin/rmid
x sapjvm_5/jre/bin/tnameserv
x sapjvm_5/jre/bin/orbd
x sapjvm_5/jre/bin/servertool
x sapjvm_5/jre/bin/unpack200
x sapjvm_5/jre/bin/pack200
x sapjvm_5/jre/lib
x sapjvm_5/jre/lib/applet
x sapjvm_5/jre/lib/ppc64
x sapjvm_5/jre/lib/ppc64/server
x sapjvm_5/jre/lib/ppc64/server/libjvm.so
SAPCAR: checksum error in sapjvm_5/jre/lib/ppc64/server/libjvm.so (error 12). No such file or directory
TRACE      2011-11-21 13:46:11.599 [iaxxejsbas.hpp:413]
           handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
The logInquirerOutStepError-NW_DiagnosticsAgent-ind-ind-ind-ind-0-0-NW_DiagnosticsAgent_GetSid-ind-ind-ind-ind-1-0-NW_getJavaHome-ind-ind-ind-ind-4-0.xml says are below
$ cat logInquirerOutStepError-NW_DiagnosticsAgent-ind-ind-ind-ind-0-0-NW_DiagnosticsAgent_GetSid-ind-ind-ind-ind-1-0-NW_getJavaHome-ind-ind-ind-ind-4-0.xml
<?xml version="1.0" encoding="utf-8"?>
<stepMessages componentTyp="NW_getJavaHome|ind|ind|ind|ind" componentInstance="|NW_DiagnosticsAgent|ind|ind|ind|ind|0|0|NW_DiagnosticsAgent_GetSid|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|4|0" step="unpackSAPJVM">
<configuration>
<property name="CPUCount">16</property>
<property name="CPUFamily">IBM6000</property>
<property name="INSTPARA_DB">IND</property>
<property name="INSTPARA_PRODUCT">NetWeaver</property>
<property name="INSTPARA_PRODUCT_VERSION">06</property>
<property name="INSTPARA_START_DIR">/tmp/sapinst_instdir/SMD_NW711/INSTALL/STANDALONE/SMD/INST</property>
<property name="OSType">AIX_64</property>
<property name="OSUname">AIX palatine 1 6 00F65A064C00</property>
<property name="OSVersion"></property>
<property name="RamSize">20480</property>
<property name="RealOSBits">64</property>
<property name="SAPInst ABI version">712</property>
<property name="SAPInst latest changelist">1068035</property>
<property name="SAPInst used source locations">/bas/710_REL/src</property>
<property name="SAPInst version of used kernel">710_REL</property>
<property name="SwapSize">20480</property>
</configuration>
<firstErrorMessage>
<message type="error" timestamp="2011-11-21 13:46:11.992">Could not get value for property .</message>
</firstErrorMessage>
<lastErrorMessage>
<message type="error" timestamp="2011-11-21 13:46:11.992">Could not get value for property .</message>
</lastErrorMessage>
<messageStack>
<message type="trace" timestamp="2011-11-21 13:46:11.990"> Call block:CallBackInCaseOfAnErrorDuringStepExecution     function:CallTheLogInquirer is validator: true</message>
<message type="warning" timestamp="2011-11-21 13:46:11.992">Could not get property IDs of the JavaScript object.</message>
<message type="error" timestamp="2011-11-21 13:46:11.992">Could not get value for property .</message>
<message type="trace" timestamp="2011-11-21 13:46:12.97">Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.</message>
<message type="trace" timestamp="2011-11-21 13:46:12.97">Moved /tmp/sapinst_instdir/SMD_NW711/INSTALL/STANDALONE/SMD/INST/logInquirerOutStepError-NW_DiagnosticsAgent-ind-ind-ind-ind-0-0-NW_DiagnosticsAgent_GetSid-ind-ind-ind-ind-1-0-NW_getJavaHome-ind-ind-ind-ind-4-0.xml to /tmp/sapinst_instdir/SMD_NW711/INSTALL/STANDALONE/SMD/INST/logInquirerOutStepError-NW_DiagnosticsAgent-ind-ind-ind-ind-0-0-NW_DiagnosticsAgent_GetSid-ind-ind-ind-ind-1-0-NW_getJavaHome-ind-ind-ind-ind-4-0.1.xml</message>
<message type="trace" timestamp="2011-11-21 13:46:12.142">A child process has been started. Pid = 22151402</message>
<message type="trace" timestamp="2011-11-21 13:46:12.215">Child process 22151402 returned 0 </message>
<message type="trace" timestamp="2011-11-21 13:46:12.244">A child process has been started. Pid = 22151404</message>
<message type="trace" timestamp="2011-11-21 13:46:12.327">Child process 22151404 returned 255 </message>
<message type="warning" timestamp="2011-11-21 13:46:12.328">Could not run /usr/sbin/lsattr -l aio0 -E -O successfully. Either the return code was != 0 or the process terminated abnormally.</message>
<message type="trace" timestamp="2011-11-21 13:46:12.358">A child process has been started. Pid = 22151406</message>
<message type="trace" timestamp="2011-11-21 13:46:12.457">Child process 22151406 returned 0 </message>
</messageStack>
</stepMessages>
$
Has anyone faced this issue?
Regards

Thank you Ken
We have got enough space under /tmp, the issue is resolved after a reboot of the server, we rebooted the server and then started the same installation it worked.
Now again, when I try to install the hostagent, it gives me the below error:
INFO       2011-11-23 09:10:51.414 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 206 already exists.
INFO       2011-11-23 09:10:51.416 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account sapinst already exists.
WARNING    2011-11-23 09:10:51.427 [syuxcgroup.cpp:146]
           <anonymous namespace>::for_each_user lib=syslib module=syslib
System call failed. Error 3 (No such process) in execution of system call 'getpwent' with parameter (), line (143) in file (syuxcgroup.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
syxxbuser.cpp: 242: *** syslib entry point CSyUser::isMember(const iastring & 'sapinst') const ***
syuxcuser.cpp: 664: bool CSyUserImpl::isMember(const iastring & sName) const
syuxcgroup.cpp: 404: PSyAccountIterator CSyGroupImpl('212')::getMembers() const
syuxcgroup.cpp: 102: <anonymous namespace>::for_each_user
INFO       2011-11-23 09:10:51.439 [syuxcaccmg.cpp:237]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account sapadm already exists.
INFO       2011-11-23 09:10:51.449 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 206 already exists.
INFO       2011-11-23 09:10:53.189 [syuxcpath.cpp:371]
           CSyPath::createFile() lib=syslib module=syslib
Creating file /tmp/sapinst_instdir/SMD_NW711/LM/INST/services.SAPtmp.
WARNING[E] 2011-11-23 09:10:54.72 [syxxc_services_entry.cpp:286]
           CSyServicesEntryParser::parsePort() const lib=syslib module=syslib
FSL-03009 Unexpected token in /etc/services entry 'x11                  6000-6063/tcp # X Window System' at line 7633, column 7: Conversion of port number string to integer failed.
WARNING[E] 2011-11-23 09:10:54.73 [syxxc_services_entry.cpp:286]
           CSyServicesEntryParser::parsePort() const lib=syslib module=syslib
FSL-03009 Unexpected token in /etc/services entry 'x11                  6000-6063/udp # X Window System' at line 7634, column 7: Conversion of port number string to integer failed.
WARNING[E] 2011-11-23 09:10:54.91 [syxxc_services_entry.cpp:286]
           CSyServicesEntryParser::parsePort() const lib=syslib module=syslib
FSL-03009 Unexpected token in /etc/services entry 'ircu                        6665-6669/tcp   # IRCU' at line 7809, column 7: Conversion of port number string to integer failed.
WARNING[E] 2011-11-23 09:10:54.91 [syxxc_services_entry.cpp:286]
           CSyServicesEntryParser::parsePort() const lib=syslib module=syslib
FSL-03009 Unexpected token in /etc/services entry 'ircu                        6665-6669/udp   # IRCU' at line 7810, column 7: Conversion of port number string to integer failed.
INFO       2011-11-23 09:10:54.521 [syuxccuren.cpp:1068]
INFO       2011-11-23 09:11:36.615
           CJSlibModule::writeInfo_impl()
Output of /tmp/sapinst_exe.10617084.1322057387/SAPCAR -x -v -i -R ./hostagent -f /sapinst_sm/smd/SMD711_K_UI_AIX_PPC64/DBINDEP/SAPHOSTAGENT.SAR,:
SAPCAR: processing archive /sapinst_sm/smd/SMD711_K_UI_AIX_PPC64/DBINDEP/SAPHOSTAGENT.SAR (version 2.01)
x hostagent.lst
x hostagent.mf
x hostexecstart
x installsapinit.sh
x ldappasswd
x ldapreg
x librfccm.o
WARNING[E] 2011-11-23 09:11:36.632
           CJSlibModule::writeError_impl()
MUT-03010 Execution of the command "/tmp/sapinst_exe.10617084.1322057387/SAPCAR -x -v -i -R ./hostagent -f /sapinst_sm/smd/SMD711_K_UI_AIX_PPC64/DBINDEP/SAPHOSTAGENT.SAR," finished with status TST_ERROR.
WARNING[E] 2011-11-23 09:11:36.647
           CJSlibModule::writeError_impl()
MUT-03010 Execution of the command "/tmp/sapinst_exe.10617084.1322057387/SAPCAR -x -v -i -R ./hostagent -f /sapinst_sm/smd/SMD711_K_UI_AIX_PPC64/DBINDEP/SAPHOSTAGENT.SAR," finished with status TST_ERROR.
WARNING    2011-11-23 09:11:36.887 [syixcsyinf.cpp:572]
           <anonymous-namespace>::runLsattr lib=syslib module=syslib
Could not run /usr/sbin/lsattr -l aio0 -E -O successfully. Either the return code was != 0 or the process terminated abnormally.
ERROR      2011-11-23 09:11:37.26 [sixxcstepexecute.cpp:969]
FCO-00011 The step unpack with step key |NW_SAPHostAgent|ind|ind|ind|ind|0|0|unpack was executed with status ERROR .
WARNING    2011-11-23 09:11:37.106 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2011-11-23 09:11:37.107 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
WARNING    2011-11-23 09:11:37.400 [syixcsyinf.cpp:572]
           <anonymous-namespace>::runLsattr lib=syslib module=syslib
Could not run /usr/sbin/lsattr -l aio0 -E -O successfully. Either the return code was != 0 or the process terminated abnormally.
Any idea on the above error?

Similar Messages

Error in Managed System Configuration - Sol Man 7.1

Dear Experts,
Whle configuring using solman_setup, I am getting below mentioned error in Managed System Configuaration:
Cannot retrieve CIM Instances from CIM Class 'SAP_DiagnosticsRelevantSoftwareFeature'!
Cannot retrieve all CIM Instances from CIM class name 'SAP_TechnicalScenario' via LMDB Mass Access API!
Cannot retrieve all CIM Instances from CIM class name 'SAP_DatabaseSystem' via LMDB Mass Access API!
Any suggestions??
Regards
Vivek

Hi Paul ,
Thanks for the note that you provided.
I am reconfiguring the LMDB and conteny Sync... The refresh will take 15-16 hours.. I am just waiting for the
sync to be finished. Let's see what is in the store for me
Keeping my fingers crossed untill then.
Regards
Vivek

SMD Error in managed system type PI 7.1 EHP1 Step Logical Ports error

Hi people,
Solution Manager Ehp1 7.0 SPS24
I am currently runnig the wizard setup for managed System, everything is fine but when I run for PI 7.1 I get the following error:
Fri Sep 10 20:29:48 2010 Logical Ports A failure occured while creating the logical port for JAVA XI : PORT_NOT_CREATED
Step Logical Ports Details
A failure occured while creating the logical port for JAVA XI : PORT_NOT_CREATED
!! Exception : PORT_NOT_CREATED
Exceptions
com.sap.mw.jco.JCO$AbapException: (126) PORT_NOT_CREATED: PORT_NOT_CREATED
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1511)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3980)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3514)
at com.sap.sup.admin.setup.SolManRfcAdapter.createXIlogicalPort(SolManRfcAdapter.java:185)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:427)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:335)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:549)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:1695)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:35)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:1965)
at java.lang.Thread.run(Thread.java:534)
Any ideas?
Thanks in advance

Hi everyone,
Thanks everyone.
Guilherme, finally I understand what really happens. "Refresh" is not working properly in the Setup Wizard.
First I have done what I can:
System    Type      Managed Products                    Product Instances
DPI           ABAP     SAP Netweaver PI 7.1               Application Server ABAP (I could not select PI at the same time)
DPI           JAVA     SAP Netweaver PI 7.1               Application Server Java + Process Integration
But, when I refresh the browser Internet Explorer appears the following:
System    Type      Managed Products                    Product Instances
DPI           ABAP     SAP Netweaver PI 7.1               Application Server ABAP + Process Integration
DPI           JAVA     SAP Netweaver PI 7.1               Application Server Java + Process Integration
And then I do not get the error anymore. (I have to repeat step 2 in the wizard "Check Prerequisites for Diagnostics)
And If I run transaction SMSY, I can see how PI is mantained since the wizard refresh SMSY.
Product Instance Selection tab:
Application Server ABAP (Flag selected: relevant)
Process Integration (Flag selected: Also Installed, Technical System[ DPI, Java])
Application Server Java (Flag selected: relevant, Technical System[ DPI, Java])
So, if I use this configuration in the SMSY, when I run "solman_setup", configuring DPI (My PI7.1), when I run "Configure Diagnostics", the wizard shows ABAP + PI as expected.
Thanks a lot Guilherme!!

Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

All,
I installed my diagnostics agent twice with different options:
- Direct P4 connection via Java EE Dispatcher Node with port 5xx04
- P4 connection via SCS message server with port 81xx
In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
Please advice.
Thanks a lot.

Hi Allam,
I checked the KBA and I think now, I have the correct HTTP port.
The error I now get is S:CL_DIAGSTP_MESSAGE:483
When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
Any idea?
Thanks.

Configuration Check Error in Managed System Configuration

Hi dear experts,
I come across a problem as the screenshot shows blew:
I check some relevant information, but no issues found:
1.
DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
saphostexec running (pid = 7094)
sapstartsrv running (pid = 7097)
10:46:34 24.06.2014 LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 7130)
DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
SAPSYSTEMNAME = SAP
SAPSYSTEM = 99
service/porttypes = SAPHostControl SAPOscol SAPCCMS
DIR_LIBRARY = /usr/sap/hostctrl/exe
DIR_EXECUTABLE = /usr/sap/hostctrl/exe
DIR_PROFILE = /usr/sap/hostctrl/exe
DIR_GLOBAL = /usr/sap/hostctrl/exe
DIR_INSTANCE = /usr/sap/hostctrl/exe
DIR_HOME = /usr/sap/hostctrl/work
service/admin_users = daaadm
service/logfile_000 = /tmp/s
service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
And the version of hostagent is up-to-date.
2.The URL
- http://<SMDhost>:1128/SAPOscol/?wsdl
- http://<SMDhost>:1128/SAPHostControl/?wsdl
can be accessed.
3.The step 3 in managed systems configuration is executed successfully.
4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
Now I have no idea how to proceed, please give me some advice, thank you in advance.
Best Regards,
Pany Pan

Hi Pany
Kindly check the below two sapnote
1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
Moreover , you need to check/verify/maintain the parameter in configtool
ThreadManager -> MaxThreadCount
Total number of Diagnostics Agents * 2 + 50
1250
ThreadManager -> InitialThreadCount
Total number of Diagnostics Agents * 1.5
900
ThreadManager -> MinThreadCount
Total number of Diagnostics Agents
600
ConnectionManipulator -> maxSoTimeOutConnections
Total number of Diagnostics Agents * 1.35
810
ConnectionManipulator -> MaxParallelUsers
Total number of Diagnostics Agents + 50
650
In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki
guide check the section Required Solution Manager Java Stack Settings (Scalability)
I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
minthreadcount , maxSoTimeOutConnections.
With Regards
Ashutosh Chaturvedi

Error in Managed system configuration.

Hi Folks,
In Solman 7.1 i am configuring my Java system in managed system configuration on the last phase of configuration which is "Check Configuration" i got the below error...
Can any one guide me on this....
I installed the Diagnostic agent as well as willy inter scope.
Regards,
Anil.

check the note which describes your problem
1776959 - Solution Manager 7.1 Manged System configuration. Error: Timezone from managed system could not be retrieved: Timezone of J2EE Engine (GMT+01:00) does not match the timezone of the diagnostics agent (Europe/Berlin)
Resolution
Open the instance.properties file of the J2EE Engine on the managed system
Locate the parameter "-Duser.timezone=" and its value
If the -Duser.timezone is not set the JVM uses GMT
Set the -Duser.timezone parameter in the JVM of the SMD Agent. If there was no "-Duser.timezone in the J2EE's instance.properties file use the timezone that was indicated in the error message e.g. GMT+01:00 (from the above error message, this might differ on your environment) To do this:
Locate the smd.properties file (for newer agents the files is called: smdagent.properties)
The path is: .../usr/sap/<DiagnosticAgentSID>/SMDA<SYSNumber>/SMDAgent/smdagent.properties
The -Duser.timezone= parameter of the Diagnostics Agent and the SAP J2EE engine need to be set to the same timezone. That means the string needs to be the same for both parameters
e.g.
If the -Duser.timezone= parameter of the J2EE engine is set to -Duser.timezone="GMT+01:00"
set the Diagnostics Agent parameter to:
smdagent.javaParameters=-DP4ClassLoad=P4Connection -Xmx256m -Xms256m -Duser.timezone="GMT+01:00"
Restart the Agent
Re-run the "Configuration Check" in the "Managed System Configuration"
Please make sure that the time zone configuration is correct according to the SAP recommendations: http://wiki.sdn.sap.com/wiki/display/Basis/Timezone+changes+best+practices

Windows Modules Installer - Error 1450 Insufficient System Resources

I've run into a major problem with the release of Windows 7 Enterprise. It seems that somewhere along the line after installing my applications, the Windows Modules Installation Service has decided to stop working.
When trying to start the service through Services Management I get the following: "Windows could not start the Windows Modules Installer service on Local Computer. Error 1450: Insufficient system resources exist to complete the requested service."
This means that Windows Update doesn't find updates, sysprep fails, and I get a blank list for "Turn Windows features on or off".
Can anyone help?
(update: After testing with some clean installs of Windows 7 Enterprise, it looks like the problem happens after installing ArcGIS Arcinfo Workstation 9.3. Uninstalling did not fix it.)
trelf

i hope this gets posted to the thread - if not i apologize, this is my first post on here.
Let me just say this - i've been a Microsoft guy for like... over 20 years now, but I have to say this year this whole platform has really seemed to fall apart for me on so many levels, and when i have the best equipment money can buy its a bit of a let
down to say the least.
Short version is - i tried the above and it didn't work, and i'm getting this Windows Modules Installer constantly trying to run and its failing repeatedly for no known reason... i suspect maybe tied to my backups which are microsoft windows based as well.
This fix above DID NOT work for me unfortunately - i set the limit, did the reboot and still can't run SFC /SCANNOW - it fails with same error and still having the same errors in the System Log - its 7036 and 7023 alternating one after the other nonstop
it appears, every 30 seconds.
Any ideas?
Thanks,
cnorton3
PS: just to note, i DO NOT have ArcGIS installed / funny enough i do know what the software is but i do not (and never have) used/installed it.

SOLMAN_SETUP Wizard - Error on Managed System Configuration

Hi all,
I've installed SAP Solution Manager 7.0 EHP1 (Stack 19) on linux-oracle.
After I start the configuration with SOLMAN_SETUP tcode.
The "Initial Configuration" and the "Basic Configuration" phases are termined with success.
In the third phase "Managed System Configuration", I try to connect itself on client 001 but when I try to generate the RFC Connection I received an error message on wizard when the system create the "Back RFC Destination". If I check this RFC on SM59 tcode it works!!!! I don't understand why I received the error message during the wizard.
Then on "Check Prerequisites" I execute the "Diagnostic Prerequisites" phase and I received 2 error messages:
a) The Introscope Enterprise Manager configuration cannot be loaded. Details:
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration. at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251) at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415) at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461) at com.sap.sup.admin.wily.jdbc.EMOverview.getAllEMgrs(EMOverview.java:220) at com.sap.sup.admin.selfcheck.checks.wily.em.EmJdbcCheck.process(EmJdbcCheck.java:32) at com.sap.sup.admin.selfcheck.fwk.check.AbstractCheck.processImpl(AbstractCheck.java:165) at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87) at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90) at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:274) at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45) at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:781) at java.lang.Thread.run(Thread.java:770)
b) The RFC Read Destination is not available for connection to Satellite System (RC=2). Details:
Please check SAP Note 1106900
I find The RFC Read Destination on SM59 tcode and it works if I try to "Connection Test".
Could you please help me to check the two errors??
Thanks in advanced
Moreno

Some more info when I tried to run the setup wizard again.
Step Wilyhost Agent Details
Setup Exception: Empty or no Wily EM host retrieved from secured global config! Going on with "localhost".
Setup Exception: No Wily EM port was passed by SetupWizard! Going on with port 6001 instead.
Created destination XXX|hostname_xxx_01
Created action xxx -XXX AbapSystem
Created action xxx|hostname_xxx_01 - XXX|hostname_xxx_01 AbapInstance
Created 2 action(s).
Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration.
Exceptions
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration.
at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251)
at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415)
at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461)
at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:269)
at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:440)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:87)
at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:110)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:416)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:328)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:545)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:1680)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:35)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:1950)
at java.lang.Thread.run(Thread.java:571)
hostname is the hostname of the system, i removed it.
xxx is the solution manager sid.

Solman_admin password changes results in errors during managed system setup

Hello all,
I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
Currently I have 6 messages at SAP, but no solution yet.
Situation:
Solman 4.0
SAP_BASIS     701     0003
SAP_ABA     701     0003
ST-PI     2008_1_700     0000
PI_BASIS     701     0003
SAP_BW     701     0003
CRMUIF     500     0001
SAP_AP     700     0014
BBPCRM     500     0013
CPRXRPM     400     0014
BI_CONT     704     0002
ST     400     0019
ST-A/PI     01L_CRM570     0000
ST-ICO     150_700     0016
ST-SER     701_2008_2     0002
So, it is uptodate.
The problem:
Changing the solman_admin password results in errors during connecting a managed system.
In the inital setup the solman_admin is created with a pasword.
After the basic setup I setup some managed systems.
In the meantime I had to change the password of solman_admin
I am logged in with solman_admin and do solman_setup to setup the managed system.
During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
This is the logging:
Step SSO Details
Found SID for SSO ACL entry : MSD
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
!! Exception : Password logon no longer possible - too many failed attempts
A failure occured while importing ABAP SSO ticket certificate in ABAP stack
!! Exception : java.lang.NullPointerException
Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
Anyone else has this problem?
gr
Sander

Just for clarification it's Solman 7.0 EHP1 correct?
Also you may want to unlock the following user:
localhost sys=70 client=300 user=SOLMAN_ADMIN
Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
Hope this helps, please let me know and we can go from there.

Error during Managed system setup "Wilyhost Agent" type

Hello All,
Managed system setup finished with one error. Iam using this for selfmonitoring (solman itself as managed system)
Error msg as follows.
0 Wilyhost Agent(s) from host inbbssun02 are connected to the EM.
Wilyhost Agent configuration finished without errors, but on Enterprise Manager (TDCTBI.india.tcs.com:6001) no Wilyhost Agent was detected from host inbbssun02. Please check the log file jvm_smdagent.out whether the Wilyhost Agent could connect to the Enterprise Manager. If the Enterprise Manager configuration has been changed recently please restart the SMD Agent on OS level.
I checked jvm_SMDAgent.out. and log as follows.
/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Introscope Agent Release 8.0.2.0 (Build 470970)
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.4.2_20-rev" from S
un Microsystems Inc.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Trying to load agent profile based on system property "com.wily.introscope.ag
entProfile"
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Trying to load file from /usr/sap/SMD/J98/SMDAgent/applications.config/com.sa
p.smd.agent.application.wilyhost/IntroscopeSapAgent.profile
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Loaded file from /usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.ag
ent.application.wilyhost/IntroscopeSapAgent.profile
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Agent Metric Aging is turned off
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Agent Metric Aging: property introscope.agent.metricAging.heartbeatInterval i
s set to 1800
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Agent Metric Aging: property introscope.agent.metricAging.dataChunk is set to
500
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Agent Metric Aging: property introscope.agent.metricAging.numberTimeslices is
set to 3000
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Looking for agent profile property "introscope.agent.extensions.directory" to
locate the extensions directory.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] The agent extensions directory /usr/sap/SMD/J98/SMDAgent/applications.config/
com.sap.smd.agent.application.wilyhost/ext was successfully located
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Introscope Agent startup complete.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] The Agent will attempt to determine its name.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Using the Agent name "SAP HostAgent J98" based on the value of the System Pro
perty "com.wily.introscope.agent.agentName".
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Initial agent name set to SAP HostAgent J98
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent.Isengard] Initiating connection attempts to the Introscope Enterprise Manager.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent.Isengard] The Agent reconnection delay is set to 15 second(s).
1/06/10 02:55:30 PM IST [INFO] [IntroscopeAgent] Started Error Reporting service
[p4://inbbssun02:50004] Agent ready.
1/06/10 02:55:34 PM IST [INFO] [IntroscopeAgent.IsengardServerConnectionManager] Connected Agent to the Introscope Enterprise
Manager at TDCTBI.india.tcs.com:6001,com.wily.isengard.postofficehub.link.net.DefaultSocketFactory. Host = "inbbssun02", Proce
ss = "SAP HostAgent Process", Agent Name = "SAP HostAgent J98".
Is there any seperate setting for wilyhost agent connection to EM ?
Regards,
Shyam

I have restarted the agent at OS level and it appears in the Agent Admin page.
I then re-ran the Managed System Config for this system and receive the same error.
I have looked at the jvm_smdagent.out file on the wilyhost and found the following errors
1/11/10 05:37:02 AM CET [INFO] [IntroscopeAgent] Looking for agent profile property "introscope.agent.extensions.directory" to locate the extensions directory.
1/11/10 05:37:02 AM CET [INFO] [IntroscopeAgent] The agent extension property "introscope.agent.extensions.directory" is not set. No extensions will be loaded.
1/11/10 05:37:02 AM CET [INFO] [IntroscopeAgent] Introscope Agent startup complete.
1/19/10 12:34:08 PM CET [WARN] [IntroscopeAgent.IsengardServerConnectionManager] The Introscope Agent is sending data to the Introscope Enterprise Manager too slowly. Keeping the connection alive.
The agent on the solution manager box is version 7.0 and the version od the agent on the PI box is 7.11
Regards
Stephen

Post installation error "Local logical system is not defined"

Hello everyone,
I freshly installed the latest SAP NetWeaver 7.01 ABAP Trial from scratch and like to configure ALE.
I followed thew steps of http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf
(ALE Quick Start) but cannot get through the following step on page 12:
From the R/3 Implementation Guide screen in TA SALE
choose Basis
    Application Link Enabling (ALE)
      Modeling and Implementing Business Processes
        Maintain Distribution Model and Distribute Views
Clicking on Maintain Distribution Model or using TA BD87, I immedeately get the following error:
The initialization of the logical system has failed.
With TA BD64 the error: Local logical system is not defined arises. I also looked at
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi,
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1 and
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide describing the same actions
to find an explanation, but without success
I assume, the error does not occur because the trial version does not support it, but
because of other post installation activities that must be done.
I already created two logical systems and assigned them to newly created clients 100 and 200,
but this did not have any impact on BD87 and BD64 as i was hoping.
Does somebody know what to do here?
Thanks in advance and kind regards,
Andreas

Hi Naveed,
i made the following settings:
SCC4: new entries created
100     Sending System
200     Receiving System
SM59: new ABAP type 3 connections:
RFC_DEST_LS_100
RFC_DEST_LS_200
- Tab Logon & Security Logon user: current user (bcuser client 001)
Connection test is successful
- Technical Settings: target host: localhost
SALE: new logical systems created
LS_100
LS_200
SCC4:
double click on 100 Sending System   configured with logical system LS_100
double click on 200 Receiving System configured with logical system LS_200
kind regards
Andreas

Trex installation error FSL-00001 System call failed. Error 3

I am installing trex on multiple hosts for a Production setup. Trex is version 7.0 patch level 40. All hosts are Windows servers running on "Windows Server 2003 R2 Enterprise x64 Edition, Service Pack 2" Distribution of trex instances are as follows,
Index Server =1
Slave Server =1
Backup Server =1
File Server =1
I started of with installing Trex global filesystem which resulted in following error,
ERROR 2008-10-23 15:19:27
FSL-00001 System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
?\Volume{51f489f8-8ef6-11dd-886f-001e0beae60e}\), line (91) in file (synxcfsmit.cpp).
ERROR 2008-10-23 15:19:27
MUT-03025 Caught ESyException in Modulecall: The system cannot find the path specified.
ERROR 2008-10-23 15:19:27
FCO-00011 The step getMounts with step key |NW_TREX_Prepare|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|NW_getMounts|ind|ind|ind|ind|0|0|getMounts was executed with status ERROR .
Installation is performed by administrator user and so has full access rights. Has anyone encountered such an error before.
Regards,
Sandeep

I uninstalled the Python application via the Windows "Add/Remove" programs utility and that seems to have resolved the issue.
TREX has been installed successfully.

SCOM 2012 R2 Gateway installation error and no System Center Management server after install

Hi,
I have installed SCOM 2012 R2 Gateway and I got an error 25372 error at the start of the install. It still installs though. However I have no system center management service running in services but I can see healthservice.exe is running.
Why am I not seeing the system center management service?
Thanks.

Using gateways with certificates is always a bit complicated because there are several things that needs to be configured correctly.
DNS: The MS and the GW server need to be able to resolve each others FQDN. you can adjust the hosts files if needed.
Traffic is only TCP 5723 from the gateway to the MS. You can test this with the telnet client.
Certificates:
http://marthijnvanrheenen.wordpress.com/2012/03/28/scom-2012-connecting-a-gateway-server-using-certificates/
The gateway server should NOT be in pending management. Remove it from here before running the approval.
You should start by making sure DNS and the 5723 port are functioning because that is probably where the problem is.
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

EHP4 Installation "Error stopping SAP system"

Hi All,
We are installing EHP4 on ECC6 on V6R1.During the downtime phase "MAIN_SWITCH/STOPSAP_XCNV" when the EHPI is trying to stop SAP system 'stopsap SID(UBP) INSTANCE(00) WAIT(YES) WAITTIME(600) STARTUPSRV(YES)' it failing.I tried executing this command from the terminal.I am getting error "Executable directory could not be determined".
Any Idea where thing are getting wrong? I have checked the path and its pointing to right dir.
Regards!!
Ravi

Hi Ravi,
do you have the following 2 parameters set in instance & start profile ?
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/<sid>/SYS/exe/run
if not, that is the reason ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

Installation error extension manager u44m1p34

My two CC updates failed tonight (extension manager and indesign). All the other apps downloaded fine earlier this past week. Nothing has changed and yet these are failing. Please advise how to update.

U44M update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963

SMD Installation Error in Managed Systems

Similar Messages

Maybe you are looking for