SMD-IntroscopeAgentSettings doesn't show Serv.Node details after mgd.wizard
Hi Gurus/Experts,
Our solman(WMP) is on EHP1-SP04(SP20). I'm configuring EP (WPP).
I have re-ran the managed system wizard and it shows all green status as :
Step Wilyhost Agent Details
Created destination WPP_JC90_server0
Created destination WPP_JC90_server1
Created destination SapStartSrv_ners35_WPP_90
Created action SAP GC|WPP_JC90_server0 - SAP GC|WPP_JC90_server0
Created action SAP GC|WPP_JC90_server1 - SAP GC|WPP_JC90_server1
Created action WPP|ners35_WPP_90 - SapStartSrv_ners35_WPP_90
Created 3 action(s).
1 Wilyhost Agent(s) from host ners35 is connected to the EM.
Wilyhost Agent setup finished successfully
But, when we check in the ners35-SMDAgentApplication log under agent administration, we get error as:
Feb 24, 2010 2:49:00 PM [Thread[Reconnect,5,main]] Warning com.sap.smd.wily.hostagent.action.ReconnectAction - doRun(): Failed to reconnect destination SapHostControl_Default
[EXCEPTION]
com.sap.smd.wily.hostagent.TransientException: Error: cannot connect to destination SapHostControl_Default
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:95)
at com.sap.smd.wily.hostagent.action.ReconnectAction.doRun(ReconnectAction.java:35)
at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
at java.lang.Thread.run(Thread.java:664)
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
java.net.ConnectException: A remote host refused an attempted connect operation.
at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:149)
at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:157)
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:92)
... 4 more
Caused by: java.net.ConnectException: A remote host refused an attempted connect operation.
In Introscope Agent Settings -> system(WPP) -> click Retrieve Current Settings -> J2ee Noe Information Details :
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
No Information is displayed.
Also, one more question. In earlier version there was a option of choosing the JVM for IBM J9 JVM. It is not shown in EHP1 - any idea, where to set that option.
Waiting for your help.
Thanks/Rakesh
Edited by: Rakesh G Nagula on Feb 24, 2010 4:19 PM
Hi Shyam,
Thanks for reply.
I agree with your reason.
I tried checking the SAPNote 1413583, but it is showing now as "The requested SAP Note is
either in reworking or is released internally only" - probably some version update.
I happen to get rid of this issue by manually adding the Wily parameters as mentioned below, and could able to see the ners35-WPP(enterprise Portal -CI Instance) in the list and able to setup introscope for the same successfully. But, the Issue is with the data. We are not able to see the monitoring data for all the areas in the Wily introscope monitoring for the WPP-ners35 CI instance, under http://<host>:8081/webview. But, we could see for DI instance of WPP-nert90 in areas of Wily Introscope Monitoring. So, question still remains...
-Dcom.wily.introscope.agent.agentName=WPP_JC90_server0
-Dcom.wily.introscope.agentProfile=/usr/sap/SMD/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.1.0.0-2009-09-04/wily/IntroscopeAgent.profile
-Dcom.wily.autoprobe.prependToJVMRuntimePath=/usr/lib/java/jre/bin/j9vm/jclSC14/classes.zip
-Xbootclasspath/p:/usr/sap/SMD/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.1.0.0-2009-09-04/wily/connectors/AutoProbeConnector.jar:/usr/sap/SMD/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.1.0.0-2009-09-04/wily/Agent.jar
-Dcom.wily.introscope.agent.agentName=WPP_JC90_server1
-Dcom.wily.introscope.agentProfile=/usr/sap/SMD/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.1.0.0-2009-09-04/wily/IntroscopeAgent.profile
-Dcom.wily.autoprobe.prependToJVMRuntimePath=/usr/lib/java/jre/bin/j9vm/jclSC14/classes.zip
-Xbootclasspath/p:/usr/sap/SMD/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.1.0.0-2009-09-04/wily/connectors/AutoProbeConnector.jar:/usr/sap/SMD/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.1.0.0-2009-09-04/wily/Agent.jar
Any suggestion for the above to fix.
Thanks/RAKESH
Similar Messages
-
Support message doesn't show automatically the details about created person
Hi,
I'm facing an issue with Support message which has been created in Sattelite system and available at Solution manager system . The issue is , support message doesn't show automatically the details about created person under colum ' Contact Person ' . Please provide your great suggestions , thanks
Regards
VivekHi Vivek,
Check if BP is created for that user and you have mapped to satellie system (identification tab)
e.g TRXN BP create business partner for that user and in identification tab maintain
ID type identification number
CRM001 <SID> <inst number> <CLNT> <User> (satellite system details)
Regards,
Shyam. -
Hyper V Manager doesn't show all nodes
I have 5 nodes in HyperV... Say HV01,02,03,04,05 which shows correctly in Fail over Cluster Manager. But it doesn't show up in HyperV Manager.
The HyperV Manager just shows 3 Nodes, say 01,02,03. What could be the possible issue?
A reply will be highly appreciated....Hyper-V manager shows only servers you added manually to the console. You need to add missing nodes manually (right click on 'Hyper-V Manager' -> Connect to Server)
http://OpsMgr.ru/ -
My iTouch still doesn't show up in iTunes after the latest update...
About maybe 1-2 weeks ago? I updated my iTunes to version 10.1.1.4 since I haven't updated it in A LONG time, then by the moment I finished updating, my iTouch's icon/option doesn't show up in iTunes anymore (before it was all fine).
And an annoying message will keep showing up, with the messages:
Title: Microsoft Windows
"MobileDeviceService has stopped working
Windows can check online for a solution to the problem."
-> Check online for a solution (recommended) *which I clicked, and no help*
-> Close
I have tried connecting my iTouch to my other USB port on my PC, reinstalling iTunes, system restore (tried to get back to the oldest version I used, but failed).
Out of solution, I waited for a new update to come, and it's here, version 10.1.2.17.
But everything is still the same!! (And yes, I have repeated the possible solution I have tried before for the 10.1.1.14 version)
While I asked for some helps on the internet, some people suggested me to reset my iTouch, because they think maybe something in there is broken or corrupted. But if I do reset it and the problem is still unsolved, I'll end up with an empty iTouch that can't sync anything at all...And I still need to use it everyday for internet purpose or whatnot...so I still didn't reset it yet...Just wanted to say that you're not the only one with the problem: http://discussions.apple.com/thread.jspa?messageID=13009436
-
Apps doesn't show up in iTunes after Sync
I synced my iPhone to a new Macbook, as my old PC had crashed, and the Apps in my iPhone doesn't show up in the iTunes. what should i do?
Hi Ocean20,
Thanks for your help! -
Reports doesn't shows horizontal scroll bar after EHP5
Hi All,
After EHP5 SP level, under menu MSS -> My Staff -> Reporting, any reports doesn't shows horizontal scroll bar, to view last colums. I tried with Authroziation SAP ALL but still issue persists.
Thanks,
Cheers!!!
Saracan you chekc note 1531182
1. Open SAP Note 19466 - "Downloading SAP kernel patches"
2. Follow the instructions on the a above note and implement the Kernel
patches contained on SAP Note 1531182 - "Number of fixed columns is
incorrect" -
Digital booklet doesn't show up in tracklisting after copy
I purchased an album off iTMS today from my work computer. I got home and copied the entire folder over to my home computer and performed an "Add folder..." to add the album to iTunes on my home computer. It showed up fine, except for the digital booklet.
When I downloaded the album earlier today, the digital booklet showed up along with the tracklisting. After doing the "Add Folder..." action on this other computer, the digital booklet doesn't show up.
I can open it with Adobe Reader just fine. The file itself exists in the folder. The album tracks play in iTunes 8 without any problems. It would be more convenient if the digital booklet showed up in the album tracklisting like it did on my other computer.
Any ideas? I tried searching but didn't see any suitable answers.
Thanks in advance!I changed setting you mention (although I thought that applied strictly to what appears in DESKTOP, not all Finder windows/folders...) made no difference.. just connected camera, the mac still won't read it...
I do know about iPhoto, iMovie, i-whatever... I still would like to see camera in FINDER (or at the very least in Adobe Bridge.. ) what happens is simply that Apple has decided you can only download/see photos in the camera ONLY with APPLE software.. this ***** BIG TIME... there's no good reason at all why Apple would do a ****** thing like this.... how users pull/view photos from a camera should be the USER'S choice, not Apple's... (in general I don't like at all programs you have to "import" photos from, you don't get a choice as to where the photos are stored in yr HD.. I have a very large amount of photos, and have a specific organizing system, specif. way of naming the folders, etc.. and I need to choose exactly where the photos are stored.. )
(to responder who said it's a Nikon issue: so Nikon decided to design their cameras so you can see photos in Windows Explorer in Windows machines, but they deliberately decided they didn't want them showing up in Finder windows on the mac? find this a bit hard to believe.. am curious now, so will consult with Nikon, but I do find it hard to believe this is a Nikon decision...)
thank you... -
Hi all,
at the moment we're implementing orgchart 3.0 (Product Version:7.0 Build Version:0700038500)
When using the wizard for setting the position view and details under organizational unit it provides the following
message/warning on the "profile"step as shown in the below link.
http://dc459.4shared.com/img/EW1Zf8-Y/s7/0.7417648190801285/screencap.PNG
This results in missing details for positions when publishing the build.
All the transports (ABAP and add on package have been imported and all included tables, views fm's are available.
Included an error log which is related to this issue?
697. 29 nov 2011 15:45:20 ERROR com.nakisa.Logger - com.nakisa.integration.sap.BuildingBlocks : while trying to invoke the method org.w3c.dom.Node.getNodeType() of an object loaded from local variable 'node'
698. 29 nov 2011 15:45:20 ERROR com.nakisa.Logger - java.lang.NullPointerException: while trying to invoke the method org.w3c.dom.Node.getNodeType() of an object loaded from local variable 'node'
699. 29 nov 2011 15:45:20 ERROR com.nakisa.Logger - Nakisa.SAP.SAPProcessor.BAPI_Hroci : while trying to invoke the method com.nakisa.framework.data.DataTable.select(java.lang.String) of an object loaded from local variable '<6>'
700. 29 nov 2011 15:45:20 ERROR com.nakisa.Logger - java.lang.NullPointerException: while trying to invoke the method com.nakisa.framework.data.DataTable.select(java.lang.String) of an object loaded from local variable '<6>'
The orgchart can be accessed and a structure is show on O level
but when trying to get in depth on position hierarchy we dont see any details or structure.
Any idea what might be the problem/issue and how to solve this?
Thanks in advance
CarlosLuke,
thanks for your helpful and quick response.
Still have some additional questions/queries:-) as this is the first time we
try to implement orgchart.
So if I'm correct we need to undeploy the current SMP build of Nakisa 3.0
and deploy the latest build with SP2?
Or can we just deploy the latest build on our NWCE without any issues?
Regarding the 3.0 SP2 is this included in the latest build or do we need to download thisseperate from the SMP?
Can we resuse the current orgchart config builds in the latest build or is it advisable to configure
orgchart with a clean build?
Thanks in advance
Regards,
Carlos
Hi Carlos,
You are using the SMP build which contains quite a few bugs. I highly recommend that you contact SAP Support for the latest version and I strongly recommend that you implement 3.0 SP2 (the build you have deployed is 3.0 without any SPs). SAP Support will supply the latest version of the build upon request.
Best regards,
Luke -
OVM Installed From Template Doesn't Show Server Pool
I was wondering if someone might be able to help me with this before I go messing things up trying to fix it on my own.
I just installed OVS 2.2.1 and OVM 2.2.0 from Template (Ver. 2.4). The install went well and the OVM server is up and running. However when I log in to the OVM web administration page I don't see the Server Pool or the OVM_EL5U4_X86_OVM_MANAGER_PVM virtual machine listed. I haven't restarted the systems yet because I thought I might ask first.
Does anyone know how I might get the server pool I specified during the template installation script to show up in the OVM manager?Nevermind. I forgot to VNC in to the console to continue the installation.
-
SCVMM 2012 - Doesn't show Server 2012 R2 Editions
Hello,
I have SCVMM 2012 with the latest service pack and agent versions installed. I have Server 2012 R2 Standard edition VMs running but I'm unable to select the correct operating system from the General tab under the VM properties. The most current operating
system to choose from is 64-bit edition of Windows Server 2012 Standard. How do I make 2012 R2 Standard an option from the drop down list? Thanks
Pat
Patupgrade to SCVMM 2012 R2 - that adds full support for the 2012 R2 operating system.
Otherwise you never add additional OS support.
<ducking - just the messenger>
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Camera doesn't show up in iPhoto after upgrade to 10.6 Snow Leopard
When I was running 10.5 Leopard, I would connect my camera to my computer and iPhoto would pop up and ask me to import. The camera would be listed in under Devices. After upgrading my OS to 10.6 Snow Leopard, iPhoto no longer recognizes my camera. I am able to import from the camera just fine using the Image Capture app, and the camera shows up in the System Profiler under USB, so the system does seem to detect and recognize the camera, it's just that iPhoto is ignoring it. iPhoto does recognize my iPhone and list it under Devices, but not my camera.
Has anyone else had similar problems with iPhoto after upgrading to Snow Leopard? Does anyone know how to fix this so iPhoto will recognize the camera?
My camera is a Casio Exilim EX-S500No one seems to like my post enough to reply, but I've found two more-recent questions with responses that were very similar.
See
http://discussions.apple.com/thread.jspa?threadID=2134852
and
http://discussions.apple.com/thread.jspa?threadID=2133251
Sadly, neither of these posts provide any answers (as of 9/4/09). It seems there's a problem with some cameras and iPhoto and Snow Leopard. The only helpful advice was to use a USB card reader which doesn't make sense in my case since the EX-S500 has it's own dock specifically for transferring pictures. Oh well, I guess I'll wait and see if Apple fixes this in 10.6.1. -
SMC 4.0 doesn't show correct start page after the installation
Hello,
after installing SMC 4.0 in a Solaris 10 sparc server it is not possible to get the start page at http://host:6789
I just get in the browser:
usage: head [-n #] [-#] [filename...]
Copyright � 2007 Sun Microsystems, Inc. All rights reserved. U.S. Government Rights - Commercial software. Government users are subject to the Sun Microsystems, Inc. standard license agreement and applicable provisions of the FAR and its supplements. Use is subject to license terms. This distribution may include materials developed by third parties.Portions may be derived from Berkeley BSD systems, licensed from U. of CA. Sun, Sun Microsystems, the Sun logo, Java, Netra, Solaris, Sun Ray and Sun StorEdge are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
more details:
# svcs -a|grep web
disabled 8:30:48 svc:/application/management/webmin:default
disabled 8:30:49 svc:/system/webconsole:console
online 8:31:53 svc:/application/management/sunmcwebserver:default
# cat /etc/release
Solaris 10 8/07 s10s_u4wos_12b SPARC
Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 August 2007
root@jumpstart:/ # es-validate
This script will help you in validation of Sun (TM) Management Center.
Validation Tool Version : 4.0
Host name : jumpstart
Number of CPUs : 2
Platform : SUNW,Sun-Fire-V215
Operating System : SunOS 5.10
Memory size : 6144 Megabytes
Swap space : 1154008k used, 8156008k available
JAVA VERSION : "1.5.0_12"
Sun Management Center Production Environment Installation.
Following layers are installed : SERVER, AGENT, CONSOLE
Installation location : /opt/SUNWsymon
Sun Management Center Add-Ons and Versions:
PRODUCT VERSION
Production Environment 4.0
Advanced System Monitoring 4.0_Build15
Service Availability Manager 4.0_Build15
Sun Fire Entry-Level Midrange S 3.5-v6
Netra 3.6
Performance Reporting Manager 4.0_Build15
Solaris Container Manager 4.0_Build15
Sun Fire Midrange Systems Domai 3.5-v6
Dynamic Reconfiguration for Sun 3.5-v6
Sun Fire Midrange Systems Platf 3.5-v6
System Reliability Manager 4.0_Build15
Workgroup Server 3.6
Generic X86/X64 Config Reader 4.0_Build15
Sun Management Center Patch installation details:
No Sun Management Center patch is installed.
Sun Management Center disk-space consumption:
PRODUCT APPROXIMATE DISK SPACE CONSUMED
Production Environment : 54452 kB
Advanced System Monitoring : 2391 kB
Service Availability Manager : 1838 kB
Sun Fire Entry-Level Midrange S : 1738 kB
Netra : 2005 kB
Performance Reporting Manager : 3371 kB
Solaris Container Manager : 3688 kB
Sun Fire Midrange Systems Domai : 1718 kB
Dynamic Reconfiguration for Sun : 303 kB
Sun Fire Midrange Systems Platf : 3270 kB
System Reliability Manager : 970 kB
Workgroup Server : 3707 kB
Generic X86/X64 Config Reader : 608 kB
TOTAL : 80059 kB
Database is located at : /var/opt/SUNWsymon/db/data/SunMC
Free space available on this partition is : 2447579 kB
Following locales are installed :
Information about upgrade from old versions is not available.
Sun Management Center Ports:
SUNMC COMPONENT PORT_ID
agent service 4800
trap service 162
event service 163
topology service 164
cfgserver service 165
cstservice service 167
metadata service 168
platform service 166
grouping service 5600
rmi service 2099
webserver_HTTP service 6789
webserver_HTTPS service 8443
Sun Management Center Server Hosts definitions in domain-config.x:
SUNMC COMPONENT SERVER_HOST
agent service jumpstart
trap service jumpstart
event service jumpstart
topology service jumpstart
cfgserver service jumpstart
cstservice service jumpstart
metadata service jumpstart
platform service jumpstart
Sun Management Center Processes:
SUNMC SERVICE STATUS
Java Server Running.
Database services Running.
Grouping service Running.
Event-handler service Running.
Topology service Running.
Trap-handler service Running.
Configuration service Running.
CST service Not Running.
Metadata Services Running.
Hardware service Not Running.
Web server Running.
Sun Management Center Agent Running.
Platform Agent Not Running.
Privilege level for Sun Management Center users :
CATEGORY USERS
esadm : smcadmin
esdomadm : smcadmin
esops : None
ALL USERS : smcadmin
server is local host
Web server package is installed correctly.
Web Server is up and responding.
Web Server servlet engine is up and responding.
Validation tool Log file is : /tmp/validation_jumpstart.080613084452.17073What is going on here?
Any help is really appreciated.
-- Nick@sachint
I tried your suggestion, but I still have the same situation. Unfortunately.
I see -
# svcs -vx
# svcs -a|grep web
root@jumpstart:/ # svcs -a|grep web
disabled Jun_13 svc:/application/management/webmin:default
disabled 18:39:06 svc:/system/webconsole:console
online 18:40:02 svc:/application/management/sunmcwebserver:default
# cat /var/svc/log/application-management-sunmcwebserver:default.log
[ Aug 6 18:39:51 Enabled. ]
[ Aug 6 18:39:51 Executing start method ("/lib/svc/method/es-svc.sh start webserver") ]
Web server started successfully.
[ Aug 6 18:40:02 Method "start" exited with status 0 ]
# svcs -p application/management/sunmcwebserver
STATE STIME FMRI
online 18:40:02 svc:/application/management/sunmcwebserver:default
18:39:53 27621 java
# telnet localhost 6789
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.If I truss the java process, I see something like -
# truss -edalf -rall -vall -wall -o /tmp/jumpstart.out -p 27621
# less /tmp/jumpstart.out
27621/28: 9.9421 write(7, 0xB02FCEA0, 498) = 498
27621/28: 2 0 0 8 - 0 8 - 0 6 1 8 : 5 3 : 3 1 H t t p P r o c e s s o
27621/28: r [ 6 7 8 9 ] [ 3 ] p r o c e s s . p a r s e\n j a v a . i o
27621/28: . I O E x c e p t i o n : C o u l d n ' t r e a d l i n e
27621/28: \n\t a t o r g . a p a c h e . c a t a l i n a . c o n n e c t
27621/28: o r . h t t p . S o c k e t I n p u t S t r e a m . r e a d R e
27621/28: q u e s t L i n e ( S o c k e t I n p u t S t r e a m . j a v a
27621/28: : 2 3 5 )\n\t a t o r g . a p a c h e . c a t a l i n a . c o
27621/28: n n e c t o r . h t t p . H t t p P r o c e s s o r . p a r s e
27621/28: R e q u e s t ( H t t p P r o c e s s o r . j a v a : 7 1 0 )\n
27621/28: \t a t o r g . a p a c h e . c a t a l i n a . c o n n e c t o
27621/28: r . h t t p . H t t p P r o c e s s o r . p r o c e s s ( H t t
27621/28: p P r o c e s s o r . j a v a : 9 7 4 )\n\t a t o r g . a p a
27621/28: c h e . c a t a l i n a . c o n n e c t o r . h t t p . H t t p
27621/28: P r o c e s s o r . r u n ( H t t p P r o c e s s o r . j a v a
27621/28: : 1 1 2 5 )\n\t a t j a v a . l a n g . T h r e a d . r u n (
27621/28: T h r e a d . j a v a : 5 9 5 )\n\n
27621/28: 9.9445 send(18, 0xB02FE768, 159, 0) = 159
27621/28: H T T P / 1 . 1 4 0 0 B a d R e q u e s t\r\n C o n t e n
27621/28: t - T y p e : t e x t / h t m l\r\n C o n n e c t i o n : c
27621/28: l o s e\r\n D a t e : W e d , 0 6 A u g 2 0 0 8 1 6 :
27621/28: 5 3 : 3 1 G M T\r\n S e r v e r : A p a c h e T o m c a t
27621/28: / 4 . 0 . 5 ( H T T P / 1 . 1 C o n n e c t o r )\r\n\r\n
27621/28: 9.9448 ioctl(18, FIONREAD, 0xB02FF34C)
...I have no idea what is happening here.
-- Nick
Edited by: der_niki on Aug 6, 2008 9:56 AM -
Finder window doesn't show directories and file after latest OS update
Hi,
since the latest OS update I can't use finder anymore.
It shows a totally unusable screen.
Please see attached screenshot.
Kind regards
MarkusSelect
View ▹ Show View Options
from the Finder menu bar. In the dialog that opens, select
Arrange by: None -
Next episode doesn't show video in podcast after iOS 8 update
AAfter I updated to the new iOS 8 the podcast are acting funny. When we play the series of videos first video runs fine, the next video only audio is running the screen goes blank. upon witching to another application and returning back the video comes back again. Please help and improve
Video podcast playback
This thread has more info. -
IWeb doesn't show JPEGs and PDFs after move to new computer.
I bought a new Mac mini (running OS X 10.8.2), moved all files from the old one, installed the most recent Domain.sites file from the old computer into the new computer's User/Library/Application Support/iWeb, but now iWeb opens with all embedded .jpg and .pdf files missing and a long list of "missing file" error messages appearing on startup. All of the .html, .png, .gif, .css and .js files appear to be working O.K. Everything in the "Sites" folder is unchanged since iWeb worked perfectly in the old computer. What can I do to fix this?
Version 1.1.2. I didn't realize until you asked and I checked, that iWeb has been discontinued and I must have transferred my version over from my old computer along with all the other applications. I see I can still buy an old CD version of iLife '09 from third-party vendors that includes iWeb '09, which is presumably version 3.0 and upgradable to 3.0.4 -- near as I can tell the last version before the program went out of production. Evidently iWeb 1.1.2 has compatibility issues with OS X Mountain Lion? I don't want to buy iWeb '09 (the other components of iLife '09 are useless, since 2012 versions were shipped with OS X 10.8) unless I can get some assurance it will work with my existing files. I have RapidWeaver 4.4.2 but I don't have time to recreate everything from scratch. It's frustrating that there's evidently no way to export all the work I've put into my iWeb website over the years into a form that can be edited using other web design software. Or is there? I bought RapidWeaver expecting to be able to open and edit my iWeb files. It's all HTML and JavaScript, isn't it? Why aren't all my files interchangeable between web design programs?
Maybe you are looking for
-
OCIStmtExecute does not return immediately when client is busy.
Hi. I'm testing a very busy multi-threaded client server that consistently generates a large number of simple queries through oci. The problem is that, when the server(client) is busy, OCIStmtExecute does not return immediately in non-blocking mode.
-
Access sharepoint store free apps in onpremise/local sharepoint 2013 server
Hi Team, I need to Access share point store free apps in onpremise/local sharepoint 2013 server I have installed Active directory and created users.In the same machine i have enabled Hyper V and installed sharepoint 2013 complete.So in my case how c
-
Hi everyone, I've been informed that i will be assigned a new program for printing reports...since i'm new to ABAP, i was asked to do some research on it while i wait for the spec doc to be delivered from the user...so i was looking around the forums
-
I have been trying to install the trial version of InDesign for several days now. The download is successful, but nothing happens when I click Install. I have tried both Download manager and manual download - the same thing happened both times. There
-
How I can block with password multiple VI's of a project?
I can block with password multiple VI's of a project (200 Vi's). Is it possible? not on a programmatically way, please. Thanks.