SMD + Java Services Missing on the System Copy Installation of SolMan

Hello,
I Installed Solution Manager with system copy option.
Backup a database from source and restore it on the target
I did the Export system image from the source and loaded it on the target system in one of the steps of SAPinst on the target system.
When the process finished I found out that the SMD doesnt show up on the SAP Management Console and can't see any JAVA service running.
It's Missing something ? I'll appreciate yours help.
Regards,
Sergio Maziano

Hi Sergio,
What release of SolMan?
Please check note 1317500 (J2EE Engine does not start after target system installation)
SMD is another SAP System (Solution Manager Diagnostics) which is installed with SAPINST since new versions
Regards.

Similar Messages

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

Java.lang.Error: java.util.zip.ZipException: The system cannot find the fil

I got maven 221 installed
i got jdk 1.6 and 1.5 installed (have tested both)
I have a strange error. All my co-workers can build but I cant. The only thing I can find is that I dont have installed BEA Weblogic but I dont want to have that installed. It should be able to run anyway.
Could someone tell me what is wrong? If you need pom.xml I got that one as well.
process-classes:
[copy] Copying 4 files to C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content
[mkdir] Created dir: C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-jar
[java] Creating an MJF from the contents of directory C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content...
[java] Compiling the files...
[java] Creating the list.
[java] Doing the compile.
[java] WLMaker-SubProcess: : Exception in thread "main" java.lang.Error: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: : at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:93)
[java] WLMaker-SubProcess: : at weblogic.management.commo.BeanGenDriver.main(BeanGenDriver.java:117)
[java] WLMaker-SubProcess: : Caused by: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: : at java.util.zip.ZipFile.open(Native Method)
[java] WLMaker-SubProcess: : at java.util.zip.ZipFile.<init>(ZipFile.java:203)
[java] WLMaker-SubProcess: : at java.util.jar.JarFile.<init>(JarFile.java:132)
[java] WLMaker-SubProcess: : at java.util.jar.JarFile.<init>(JarFile.java:97)
[java] WLMaker-SubProcess: : at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:90)
[java] WLMaker-SubProcess: : ... 1 more
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] BeanGen code generation failed
[HUDSON] Archiving C:\hudson\jobs\albpm_ip-identity-asserter_-Build\workspace\pom.xml to C:\hudson\jobs\albpmip-identity-asserter_-Build\modules\dk.skat.ip.integration.albpm$ip-identity-asserter\builds\2010-11-2213-41-28\archive\dk.skat.ip.integration.albpm\ip-identity-asserter\1.2\pom.xml
[INFO] ------------------------------------------------------------------------

from my experience, using weblogic jars can be a pain if the full install is not on the local box.
Note that you dont have to 'install' it. Just copy the directory.
Reason is that the jar files have manifests with relative classpaths.
For an example of horror take a look at the weblogic.jar MANIFEST's classpath entry.
-Fred

Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA

Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, Polina

Hi Manoj, 
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ 
1) std_server0.out is in the condition before the system copy, no new data was written there. 
2)dev_disp 
DpJ2eeStart: j2ee state = STARTED 
DpJ2eeLogin: j2ee state = CONNECTED 
Fri Feb 26 12:58:04 2010 
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212] 
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Fri Feb 26 12:58:20 2010 
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN 
Fri Feb 26 12:57:20 2010 
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207] 
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214] 
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]
It seems that java is trying to start but something goes wrong and it have to shut down
3)dev_bootstrap 
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66) 
[Thr 1086335296] ********************************************************************** 
ERROR => The Java VM terminated with a non-zero exit code. 
Please see SAP Note 943602 , section 'J2EE Engine exit codes' 
for additional information and trouble shooting. 
********************************************************************** 
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17 
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)
4) jvm_bootstrap.out 
... 
Exception occurred: 
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
.. 
Exception occurred: 
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties! 
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476) 
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146) 
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties! 
[Bootstrap module]> Problem occurred while performing synchronization.
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...
Thanks in advance. 
Regards, 
Polina

Missing indexes after system copy

Hi All
we have around 70,000 missing indexes after the system copy
offline export from
source with sun solaris oracle
To
Linux oracle
but these appeared after we Run SGEN , which took 60 hours for a 200 Gb database.
and target system response is also slow , how to go ahead with this issue
we have checked export and import logs , none of the packages were missed
1 Why these missing indexes after SGEN , and why SGEN for 60 hours
2 when we check the Tables which appeared in Missing indexes ,from SE14 it says In Consistency with Data dictionary
3 and the other error , is Index Missing in the database ,
4 but we cant create all these manually.
Regards

Hi Matt
Thanks for the response
After sap suggestion , we have done only import again, with 721 R3load same as export.
but still the R3load.exe.log of import shows as done with 720 kernel.
import R3load.exe log //bas/720_REL/src/R3ld/R3load/R3ldmain.c#
export R3load.exe log //bas/721_REL/src/R3ld/R3load/R3ldmain.c#10 $ SAP
But when we compare the sapinst_dev and AGR logs both from export and import
both are referring the same 721 R3load version ,
//bas/721_REL/src/R3ld/R3load/R3ldmain.c
still we have same missing indexes issue , after we did the import again.
Are we making any mistakes in export , Any suggestions are welcome
hi all , kindly respond with your inputs , on this
Regards

HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point.

Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

Moving a library: Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive. Hold down the option (alt) key (shift on Windows) and open iTunes. At the prompt to create or choose a library choose the copied iTunes folder.

HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

nope all my songs are copied and organized into the iTunes library.

How to configure a test sever with the system copy with prd data

Dear All ,
I need to configure a test sever with the system copy with prd data.
Please any one can suggest the step by step process to do the same configure and system copy.
Regards
kumar

Dear All,
I am facing problem in system copy. I want to knoe the way after restore i can move all the data and server data in one drive .
Now the error is resolve by changing the initTAT.sap the value tape to disk but now stuck in the drive for restore it is asking which is not there at os level.
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD33' at location
BrDirCreate-1
BR0253E errno 2: No such file or directory
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD32' at location
TO solve the above problem i have created ad network drive for this but once all the restore will be completed than how i can i move the data form network drive to on drvie.
Please suggest
Regards,
Kumar
Edited by: kumarmoh on Jul 21, 2009 1:43 PM

Error in Java compilation: \s7u.log (The system cannot find the file specified)

Hi there,
I got an error when I tried to compile a group of sqlj and java files. The error below:
----------------------------------------------sqlj -status -passes -compile=true -ser2class -d=. -classpath=.;%CLASSPATH% E:\work\src\java\com\interadnet\persistence\*.sqlj E:\work\src\java\com\interadnet\persistence\*.java
out [Translating 53 files]
out [Reading file AdServerInformationType]
out [Reading file AdsType]
out [Reading file AgencyType]
out [Reading file CampaigntocompletionType]
out [Reading file CampaignType]
out [Reading file ChannelType]
out [Reading file ClientType]
out [Reading file CompletionType]
out [Reading file ContactType]
out [Reading file CreativeType]
out [Reading file FtpServerType]
out [Reading file InsertioninstructionType]
out [Reading file MediaServerType]
out [Reading file SystemPropertyType]
out [Reading file VendorType]
out [Reading file AdServerInformationTypeRef]
out [Reading file AdServerInformationView]
out [Reading file AdsTypeRef]
out [Reading file AdsView]
out [Reading file AgencyTypeRef]
out [Reading file AgencyView]
out [Reading file CampaigntocompletionTypeRef]
out [Reading file CampaignToCompletionView]
out [Reading file CampaignTypeRef]
out [Reading file CampaignTypeRefs]
out [Reading file CampaignView]
out [Reading file ChannelTypeRef]
out [Reading file ChannelTypeRefs]
out [Reading file ChannelView]
out [Reading file ClientTypeRef]
out [Reading file ClientTypeRefs]
out [Reading file ClientView]
out [Reading file CompletionTypeRef]
out [Reading file CompletionTypeRefs]
out [Reading file CompletionView]
out [Reading file ContactTypeRef]
out [Reading file ContactView]
out [Reading file CreativeTypeRef]
out [Reading file CreativeTypeRefs]
out [Reading file CreativeView]
out [Reading file FtpServerTypeRef]
out [Reading file FtpServerView]
out [Reading file InsertioninstructionTypeRef]
out [Reading file InsertioninstructionTypeRefs]
out [Reading file InsertionInstructionView]
out [Reading file MediaServerTypeRef]
out [Reading file MediaServerView]
out [Reading file SystemPropertyTypeRef]
out [Reading file SystemPropertyTypeRefs]
out [Reading file SystemPropertyView]
out [Reading file VendorTypeRef]
out [Reading file VendorTypeRefs]
out [Reading file VendorView]
out [Translating file AdServerInformationType]
out [Translating file AdsType]
out [Translating file AgencyType]
out [Translating file CampaigntocompletionType]
out [Translating file CampaignType]
out [Translating file ChannelType]
out [Translating file ClientType]
out [Translating file CompletionType]
out [Translating file ContactType]
out [Translating file CreativeType]
out [Translating file FtpServerType]
out [Translating file InsertioninstructionType]
out [Translating file MediaServerType]
out [Translating file SystemPropertyType]
out [Translating file VendorType]
out [Translating file AdServerInformationTypeRef]
out [Translating file AdServerInformationView]
out [Translating file AdsTypeRef]
out [Translating file AdsView]
out [Translating file AgencyTypeRef]
out [Translating file AgencyView]
out [Translating file CampaigntocompletionTypeRef]
out [Translating file CampaignToCompletionView]
out [Translating file CampaignTypeRef]
out [Translating file CampaignTypeRefs]
out [Translating file CampaignView]
out [Translating file ChannelTypeRef]
out [Translating file ChannelTypeRefs]
out [Translating file ChannelView]
out [Translating file ClientTypeRef]
out [Translating file ClientTypeRefs]
out [Translating file ClientView]
out [Translating file CompletionTypeRef]
out [Translating file CompletionTypeRefs]
out [Translating file CompletionView]
out [Translating file ContactTypeRef]
out [Translating file ContactView]
out [Translating file CreativeTypeRef]
out [Translating file CreativeTypeRefs]
out [Translating file CreativeView]
out [Translating file FtpServerTypeRef]
out [Translating file FtpServerView]
out [Translating file InsertioninstructionTypeRef]
out [Translating file InsertioninstructionTypeRefs]
out [Translating file InsertionInstructionView]
out [Translating file MediaServerTypeRef]
out [Translating file MediaServerView]
out [Translating file SystemPropertyTypeRef]
out [Translating file SystemPropertyTypeRefs]
out [Translating file SystemPropertyView]
out [Translating file VendorTypeRef]
out [Translating file VendorTypeRefs]
out [Translating file VendorView]
out [Compiling 53 Java files]
err*** The following character string is too long:
err***
out Error in Java compilation: \s7u.log (The system cannot find the file specified)
Any suggestion appreciated.
Daniel Huang

Having not seen this before, I assume that the issue is that the command line string is too long when Javac is invoked.
Here are a few things to reduce the size of the command line:
- do not use the CLASSPATH option, but set the CLASSPATH environment variable (you can to that in a .bat file)
- do not provide the .java files but rely on the implicit make capability in both, the SQLJ translator and the Java compiler. (Note: you must mention all of the .sqlj files that your program requires, do not rely on implicit make to find all of those.)
- you can perform the -ser2class conversion as a separate step (see the SQLJ FAQ), as well as the Java compilation
- there may or may not be a facility in your operating system to increase the size of the environment (and this may or may not have an effect on the maximum command line length)
- you could try to omit the -passes option and see if that helps (that may actually be where your invocation if failing in the first place, in that it cannot write to some temporary file).
Let us know how it goes. Thanks!

Some errors after doing the system copy for DB2 database instance

HI,
Recently we have transferred the DB2 database instance from old host( db 9.1.7 under windows 2003 R2) to new host( DB2 9.7.9 under windows 2008 R2) using the system copy database depending methods.
Currently system is:
* ECC 6.0 under NW 7.0 SR3
* Kernel : 7.20
* Basis: 7.0 with support package level 17
*application instance connecting db instance via DB2 CLI
1) a) After log in system using the T-code: SM21 to read the system log, it will record the bellow error:
     b) From the log taken from log fie: dev_w*, i also found the below error:
A ABAP Program SAPMSSY2                                .
A Source RSBTCTRC                                 Line 60.
A Error Code DBIF_RSQL_SQL_ERROR.
A Module $Id: //bas/720_REL/src/krn/runt/absapsql.c#28 $ SAP.
A Function ab_HandleRsqlErrors Line 716.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A SQL error in the database when accessing a table..
c) any background job will be cancelled when it is running. I think the error is related to above mentioned issue.
2) If i go to T-code: DB13---Diagnostics----db2 logs, it will come out the below error:
Thanks.

HI Manas,
Yes, this problem is with particular this table.
Refer to below error coming from db2diag.log when i access the table:BTCCTL:
2014-08-12-17.52.08.866000+480 I35784932F1196     LEVEL: Severe
PID     : 3380                 TID : 2676        PROC : db2syscs.exe
INSTANCE: DB2DV1               NODE : 000         DB   : DV1
APPHDL : 0-127                APPID: *LOCAL.DB2DV1.140812095207
AUTHID : DB2DV1
EDUID   : 2676                 EDUNAME: db2agent (DV1) 0
FUNCTION: DB2 UDB, data management, sqldSetupIndexScan, probe:1873
MESSAGE : ZRC=0x82040001=-2113667071=SQLD_NONSEVERE_PRGERR
          "non-severe dms programming error"
          DIA8532C An internal processing error has occurred.
DATA #1 : String, 39 bytes
Specified index not found for scan open
DATA #2 : String, 12 bytes
sqldScanOpen
CALLSTCK:
[0] 0x000000018010E989 pdLog + 0x353
[1] 0x0000000003ABE3C2 sqlzSetAndLog901 + 0x192
[2] 0x0000000001E61F01 sqldSetupIndexScan + 0xF37
[3] 0x0000000001E5F5CC sqldScanOpen + 0xBEE
[4] 0x000000000334F460 sqlriopn + 0x316
[5] 0x00000000034AE788 sqlritaSimplePerm + 0x252
[6] 0x000000000336AC8B sqlriSectInvoke + 0x139
[7] 0x00000000030A6F0C sqlrr_process_fetch_request + 0x1A8
[8] 0x00000000030A2902 sqlrr_open + 0x534
[9] 0x000000000223FCCB sqljs_ddm_opnqry + 0x447
2014-08-12-17.52.08.866000+480 I35786130F533      LEVEL: Error
PID     : 3380                 TID : 2676        PROC : db2syscs.exe
INSTANCE: DB2DV1               NODE : 000         DB   : DV1
APPHDL : 0-127                APPID: *LOCAL.DB2DV1.140812095207
AUTHID : DB2DV1
EDUID   : 2676                 EDUNAME: db2agent (DV1) 0
FUNCTION: DB2 UDB, data management, sqldSetupIndexScan, probe:1873
DATA #1 : unsigned integer, 4 bytes
10
DATA #2 : unsigned integer, 4 bytes
1704
DATA #3 : unsigned integer, 2 bytes

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

What DVD drive are you using?

Exchange profile pointing to old hostname after the system copy

Hi Team,
I did system copy of SAP XI3.0 SP19 from host HOST1 (Windows 2003 , MS SQL 2005 SP3)to HOST2 (Windows 2008 R2, MS SQL 2005 SP3)with the same SID . I am using same SID as i will have to upgrade XI3.0 to PI7.1 EHP1 on the new host(trying to use parallel environment).
The copy is fine and Java is up, however , there is some problem with the exchange profile of the new host.It has IR, ID, RWB,SLD hosts pointing to HOST1.When i try to change the host to HOST2 and save it gives me this message
RFC call returned an error code: 300
Stack Trace class com.sap.rprof.dbprofiles.DBException:
at com.sap.rprof.dbprofiles.DBProfilesLock.checkReturn(DBProfilesLock.java:200)
at com.sap.rprof.dbprofiles.DBProfilesLock.lockProfile(DBProfilesLock.java:112)
at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactoryForUpdate(RemoteProfile.java:233)
at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileForUpdate(RemoteProfile.java:169)
at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfileForUpdate(ExchangeProfile.java:67)
at com.sap.rprof.remoteProfile.webui.ProfileTreeItem.updateInstance(ProfileTreeItem.java:222)
at com.sap.rprof.remoteProfile.webui.Edit.saveInstance(Edit.java:277)
at com.sap.rprof.remoteProfile.webui.Edit.doGet(Edit.java:207)
at com.sap.rprof.remoteProfile.webui.Edit.doPost(Edit.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Connection tab in the exchange profile points to HOST2.I ensured SLDAPICUST,SXMB_ADM->Integration Engine points to HOST2 ,also maintained the Pipe LIne URL to point to HOST2.I have followed the follow -up activities of system copy guides .But the issue is not resolved , exchange profile does not allow me to change the hostnames of IR, ID ,RWB.
Could you please help me with this issue?
Is the issue because of using same SID on different hosts?
Thanks,
Padmaja.

Hello,
You need to change host name manually in to Exchange profile, RFC, JCo and make sure PI is connected to SLD.
Cheers,
Yogesh

Mixed (Java & ABAP w/different sources) System Copy Failed- NW 7.0 SR3/SP14

Hello SAP Friends! Our NW admin did a dual stack system copy where the ABAP server came from system 1 and the Java server came from system 2. This worked fine for ABAP (duh it was installed first), but the Java system copy was a disaster. the server started but many key services did not.
Why?
Many of the configuration entries were not generated properly. For example, a new, unknown SID was created, and many entries referenced System 1 (the ABAP source, not even the Java source). We were able to find and fix some incorrect config entries, but we still couldn't get all of the services we needed to work.
I think NW is so complicated that such a configuration is probably impossible, but maybe I am wrong.
Does anyone have tips? Or can confirm that this would never work?
The current plan is to install the Java Server from scratch as an add-in, which is less effort than searching through all the config files without any certainty that it will work. Hopefully it will work.
Many thanks in advance.

Hi Matt,
What kind of infos are you looking for? I didn't perform the copy, have just been trying to figure out how to get all of the Java stack's services to start properly. As far as I know, it was done using the standard System Copy wizard. The ABAP server was done as a central instance and then the Java server was copied and installed as a java add-in.
I have asked the admin to post the details to this thread, but it would be helpful if you could mention what types of info and details you are looking for.
Thanks and Best Regards,
John

SAP Business Objects Data Services 3.2 - Homogenous System Copy

Hi All,
We have a SAP Business Objects Data Services 3.2.
I wanted to know if it is possible do a homogenous system copy or any alternate procedure. I just need to perform this on a Development system and move all its content to a new Sandbox installation.
Any info on this will be much useful.
Thanks
Jaianandh V

Hi,
you could extract an ATL File from DEV and import it to Sandbox.
This can be done via the DS DEsigner. Please Check the DS Designer User Guide for more information.
Regards
-Seb.

Infopackages are missing after an system copy from Prodution to Quality

Hi SAP Gurus,
After an DB copy, from BW Prodution to Quality, the infopackages are missing.
Can anyone can tell me how to get the infopackages from PRD to QAS.
Thanks,
Pedro Martins

Hi
Casue for package missing
In some cases infopackages will be missing because of the INIT Delta infopackage will be copied againg from Production were duplicates are created for the same Init. so in such cases the package will be missing
During DB copy if any infopackage are created in production at that point of time the system will not take that package into consideration
inorder to get the package we can do reverse transport (from production to Quality)
follow the steps as below
Transporting from BWP TO BWQ : Reverse Transports
Step1
Create request in Source System (Eg: BWP) say A and Collect required objects (infopackage)into request A
Step2
Goto TCode : SE09/SE10 --> create a transport of Copies request B (give the user name and tick on transport copies just below the workbentch request)
Step3
Check, check box for Transport of Copies and click Create , now the system will prompt one more screen
Step4
Now choose Transports of Copies and continue.
Step5
Enter required Target system(F4 help available) Eg: BWQ.
Step6
Unlock Objects(Tcode : SE03) from Request A and Move Objects to Request B(Tcode SE10).
Step7
Delete objects from Request A
Step8
Relase the request B (se09)
Step9
Now log on to the Target System(Eg: BWQ) import Queue and import request.
Step10
In BWQ queue go to menu Request >Forward> give BWD or
you can directly provide BWD as Target System in Step 2
Step11
Go to BWD and import the request.
santosh

SMD + Java Services Missing on the System Copy Installation of SolMan

Similar Messages

Maybe you are looking for