SMD on SP15: no data for E2E Workload Analysis is visible
Hello,
I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 4) and would set up the SMD functionality for SAP EP 6.40 SP19.
The Set up Wizards runs without any errors but I could see the data in the tabs (E2E Workload, E2E Change Analysis)
The E2E_EXTRACTOR_CONTROLLER job runs without errors.
Which actions should be done to solve the problem?
Thank you!
regards
Thom
Tom,
Make sure that when you ran SMD setup wizard, job CCMSBISETUP completed successfully. Check this in SM37.
Check ABAP runtime errors in ST22.
If you are getting RAISE_EXCEPTION error, apply note 1119766.
Make sure that MultiProvider 0SMD_MPIH is activated. In BI client run transaction RSA1, Modeling, InfoProvider- check if 0SMD_MPIH is active.
If above doesnt solve the issue, try to do Manual activation of BI Content for E2E Diagnostics. (note 1110013)
Hope this helps.
Thanks,
Labinot
Similar Messages
-
SMD on SP15: no data for E2E Workload Analysis are shown
Hello!
I have successfully run Setup Wizard for the satellite solution "EP Portal on 6.40".
Unfortunately no data for E2E Workload Analysis are shown since more than one month.
I use SAP Solution Manager with SP 15, BI CONT 9
I have implemented the following SAP notes:
1088163, 1107804, 110782, 1119766
The jobs E2E_EXTRACTOR_CONTROLLER are running without errors.
Enclosed one of those for portal solution:
09.04.2008 E2E: Extractor Controller 1
EC: 09.04.2008 13:05:52 UTC Extractor Controller started for SID B11
EC: 09.04.2008 15:05:52 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 13:05:52 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:52 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:52 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:54 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/APPLOG_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/APPLOG_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/APPLOG_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/DUMP_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
09.04.2008 E2E: Extractor Controller 2
ME: 13:05:54 UTC Calling Extractor /SDF/DUMP_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/DUMP_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/SYSLOG_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/SYSLOG_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/SYSLOG_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/UPDATE_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/UPDATE_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/UPDATE_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
09.04.2008 E2E: Extractor Controller 3
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:55 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:55 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 13:05:56 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 13:05:56 UTC Receiving return code 6 from
E2E_JAVA_EXTRACTOR_IF
ME: Error:
DATA_RETRIEVAL_EXCEPTION
EC: 13:05:56 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 13:05:56 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:57 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:57 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR
09.04.2008 E2E: Extractor Controller 4
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:05:58 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 08.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 08.04.2008 12 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 08.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:58 UTC Calling Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR ,
Extractor Class:
ME: 13:05:58 UTC Receiving return code 98 from
/SDF/IDOC_THROUGHPUT_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:58 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F60_XI_E2E_PROXY_STATS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:05:58 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:58 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
ME: No Data Found.
ME: 13:06:00 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_C_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_C_TRANSPORTS
09.04.2008 E2E: Extractor Controller 5
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_NOTES
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_NOTES
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_W_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_W_TRANSPORTS
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:01 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
09.04.2008 E2E: Extractor Controller 6
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:06:02 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:06:02 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F55_XI_IDOC_ADAPTER
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:02 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:02 UTC Calling Extractor F55_XI_IDOC_ADAPTER
ME: No Data Found.
ME: 13:06:02 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F60_XI_E2E_PROXY_STATS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_C_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_C_TRANSPORTS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
09.04.2008 E2E: Extractor Controller 7
EC: Extractor F90_CA_NOTES
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_NOTES
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_W_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_W_TRANSPORTS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_SSR_EXTRACTOR_IF
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: Local Execution of Extractor.
EC: ME called in Multi-Mode.
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor E2E_SSR_EXTRACTOR_IF ,
Extractor Class:
E2E_SSR_EXTRACTOR_0CCMSATPH
ME: 13:06:06 UTC Receiving return code 0 from
E2E_SSR_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:06:06 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Any helpful information will be appreciated
regards
ThomSame problem being observed in our Solman system (SP15). Below are the errors observed in the spool output of E2E framework jobs,
1] ME: Data Loader Error occurred.
EC: 21:05:44 UTC Main Extractor raises exception. No Data returned by extractor.
2] No action - TSL parameter detected.
This extractor is not allowed to run outside time frame
3] ME: 21:05:45 UTC Receiving return code 98 from
/SDF/UPDATE_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 21:05:45 UTC Main Extractor raises exception. No Data returned by extractor.
4] ME: Error:
DATA_RETRIEVAL_EXCEPTION
EC: 21:05:46 UTC Main Extractor raises exception. No Data returned by extractor.
Tried referring E2E workload analysis guide...no use..the issues have not been covered in that. -
SMD: no data for E2E Workload Analysis are shown
Hello,
I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 3) and would set up the SMD functionality for SAP EP 6.40 SP19.
The Set up Wizards runs without any errors and I could see the data in all the steps (E2E Workload, E2E Change Analysis).
Unfortunately since 2 months I can see any data in (E2E Workload, E2E Change Analysis, E2E Exception Analysis).
The E2E_EXTRACTOR_CONTROLLER job runs and is enclosed here
16.04.2008 E2E: Extractor Controller 1
EC: 16.04.2008 14:05:11 UTC Extractor Controller started for SID E11
EC: 16.04.2008 16:05:11 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 14:05:11 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:11 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:12 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:14 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:14 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:14 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:16 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:16 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:16 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
16.04.2008 E2E: Extractor Controller 2
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:16 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:18 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:18 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:18 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:18 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:20 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:20 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:20 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:20 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
16.04.2008 E2E: Extractor Controller 3
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:21 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:21 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Can some one help to solve this problem.
Thank you very much
regards
ThomHello,
I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 3) and would set up the SMD functionality for SAP EP 6.40 SP19.
The Set up Wizards runs without any errors and I could see the data in all the steps (E2E Workload, E2E Change Analysis).
Unfortunately since 2 months I can see any data in (E2E Workload, E2E Change Analysis, E2E Exception Analysis).
The E2E_EXTRACTOR_CONTROLLER job runs and is enclosed here
16.04.2008 E2E: Extractor Controller 1
EC: 16.04.2008 14:05:11 UTC Extractor Controller started for SID E11
EC: 16.04.2008 16:05:11 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 14:05:11 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:11 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:12 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:14 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:14 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:14 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:16 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:16 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:16 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
16.04.2008 E2E: Extractor Controller 2
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:16 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:18 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:18 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:18 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:18 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:20 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:20 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:20 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:20 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
16.04.2008 E2E: Extractor Controller 3
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:21 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:21 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Can some one help to solve this problem.
Thank you very much
regards
Thom -
Hi All,
Currently we are searching for BI - IP workload analysis tools. I come to know that SolMan Diagnostic tool E2E Workload Analysis for BI useful somewhat to measure the work load. Kindly anybody can tell me
1. Is this tool works for JAVA environment or not
2. How it is useful for BI-IP workload analysis
3. Is there any tools like SolMan diagnostic tool.
4. If we install this tool in SolMan what is the impact.
Thxs,
KVAThis is what I get from Application log (slg1) when I try to drill down on system BIJ (java system) and the page under Workload Analysis do not display (WA-Overview) is ok:
SELECT { [Measures].[0SMD_AVG], [Measures].[0SMD_MAX], [Measures].[0SMD_EXS
] } ON 0, NON EMPTY [0SMD_METY].MEMBERS ON 1 FROM [0SMD_MPEH/0SMD_MPEH_WA_Q
0008_H] SAP VARIABLES [0SMD_V_SID] INCLUDING "BIJ_2" [0SMD_V_TIHMFROM] INCL
UDING >= "201008270000" [0SMD_V_TIHMTO] INCLUDING <= "201008272359" [0SMD_V
INFOPR] INCLUDING "0SMDPERH" [0SMD_V_INFOPR] INCLUDING "0SMD_PE2H" [0SMD_
V_MTYPEM] INCLUDING "IVIEWS" [0SMD_V_MTYPEM] INCLUDING "BI RUNTIME SERVICE"
Value "BIJ_2" for variable "E2E SID Variable" is invalid
Type:E, Id:BRAIN, Number:643, System:SMDCLNT001
I applied the note Note 1301656 even if we are already sp23. I also regenerated the query 0SMD* in bi client.
What does Value "BIJ_2" for variable "E2E SID Variable" is invalid mean and how to correct this? -
E2E Workload analysis-Conditions tab
Hello,
While cheking the E2E workload analysis, I could see three expandable (drill down) tabs in the workload analysis section. 1. Conditions 2. Navigation 3.Metric Data Display. Here I am not abe to understand the functionality of 'Conditions'. Could you please tell me the use of this and how we can use this?
Regards,
Rajeevduplicate post
-
Hi All,
I'm trying configure E2E monitoring. I configured all necessary steps, I can see my BI 4.1 system in SLD, also in SOLMAN, all “lights” are green. But if I start Root Cause Analysis>> Ent-to End Analysis>> My system>> Workload Analysis, I see this error "The systems you selected do not contain any software components currently supported by E2E Workload Analysis".It would be better if you can raise the question at Remote Supportability and Monitoring Tools
and or comment in the blog post How to generate and consume an E2E trace with BI4.x (for non-SolMan landscapes)
created by Toby Johnston
Do go through the note 1871260 - The systems you selected do not contain any software
components currently supported by E2E Workload analysis for SAP HANA
Hope they help. -
No data in RunSAP workload analysis
Hi Experts,
I've installed solution manager 7.0 EHP1 and configured to execute End-to-End Analysis.
And I can use Wily Introscope Workstation to display realtime data and history data.
But in solution manager workcenter, I can't get any data from workload analysis.
I've used t-code CCMSBISETUP to setup BI and everything looks fine.
What other things should I check?
Thanks!Hello,
Please make sure that your system fulfills all the pre-requisites. The following note will point you to the right one depending on the release level of your system:
1274287 End-to-End Diagnostics
Make sure your systems are well defined, as of EHP1 is mandatory the use of SLD. Please check the following document:
http://service.sap.com/diagnostics
Media Library...
SAP Solution Manager Landscape Setup Guide
Further information can be found ate SAP Note 1435043.
1435043 E2E Workload Analysis - No applicable data found
Regards,
Allam Drebes -
Crystal Reports Template : Data for Cash-Flow Analysis
Dear Experts,
We are working on cash flow forecasting model, i.e going forward 12 months, which in written in MS Excel. We update it with actual data recorded in SAP B1 (Ver 8.8 PL18) A manual process.
Was wondering if we can get a crystal report template which contain the following data:
Sales, Purchases, Collections and Payments by BP in a given time (user specified)
BP Code
BP Name
Sales Invoice #
Sales Invoice Date
Sales Invoice Value (total)
Sales Credit Memo #
Sales Credit Memo Date
Sales Credit Value (total)
Purchase Invoice #
Purchase Invoice Date
Purchase Invoice Value (total)
Purchase Credit Memo #
Purchase Credit Memo Date
Purchase Credit Value (total)
BP Receipt #
BP Receipt Date
BP Receipt Value
BP Payment #
BP Payment Date
BP Payment Value
Thank you to all who have answered this question posted earlier under queries, I am hoping we can get a combined report using CR, a feat not possible using SAP B1 Query function. I look forward to your advice.
Regards
RajHi,
I am not familiar with crystal report. But using queries (that already answered) you can create crystal report.
You can also refer how to guide for creating crystal report in sap b1.
Thanks & Regards,
Nagarajan -
SMD E2E: Configuration Analysis
Hi!
I can already see the data for E2E Workload Analysis.
Unfortunately I cannot see the data under the tab "E2E Configuration".
Can some one tel me how to proceed with with errors/warnings?
No SID found for value 'E11 0020198811012003146909000001927' of characteristic 0SMD_FSRC
Invalid filter on 0SMD_FSRC: Filter changed
Characteristic 0SMD_CSAL was changed in InfoCube 0SMD_CA01. Adjust the query
What I have already done
tcode RSRT --> Gen. query directly --> "0SMD*"
tcode CCMSBISETUP --> Sceanrio "E2E"
Any helpful information will be appreciated
regards
ThomHi,
I'm trying to setup E2E. Diagnostics server (BI client in solman) & Managed system setup was done.
I don't see any graphs(at least plain) in solman. I observed that extractor jobs are failing, also i dont see any info objects under solman diagnostics in TC - RSA1.
Please guide.
Thanks in advance. -
No data in Workload Analysis overview in E2E Analysis for TREX
Hi,
I'm not getting any data in E2e Workload analysis Overview screen for TREX system. Data is available in all other screens and extractors are running fine. I'm using Solution Manager 7.1 SP10. Kindly help me.
Regards,
PragadeesHi Pragadeesh,
Your system landscape definition in SMSY seems to be wrong. The products selected at the Setup Wizard for the managed system must exist in SMSY in order to run the extractos correctly.
Please refer to the Root Cause Analysis Landscape Guide available
at http://service.sap.com/diagnostics -> media library for additional information.
1) Upgrade CIM model according to note 669669.
2) Download the latest version of note 1468591 and apply it using SNOTE
3) Check note 1259109, download the latest configuration file and apply it
Additionally, it is highly recommended to patch your LM-SERVICE SP09
with the latest patch (1) according to note 1599627.
Thanks
Vikram -
End-to-End Workload Analysis: Architecture
Hi there,
I have read in training material about E2E Workload Analysis (from SAP) the following statement:
"On ABAP-based components, the workload related data is extracted from statistical files and is written in BI"
The picture in the training material shows, that e.g. Java and .Net needs a Diagnostics Agent. But for ABAP-based components only a RFC Interface is necessary.
Is it possible to use the E2E Workload Analysis without installing any Agent on the ABAP-System?
And are there any jobs which must be scheduled on the ABAP-System alternatively on the Solution Manager?
If I start the Workload Analysis and chose a ABAP-System, there are no statistical data.
Thanks for your reply!
Best regards,
AndreasHi there,
The ABAP systems connect using RFC, but it is just one of the required connections that are maintained among satellite and managing system. (this is actually established in the managed system configuration, step 1).
The actual data is collected by SMD Agent, that pools several other services in the sattelite system itself, such as SAPOSCOL and SAP CCMS.
There's a PDF attached to SAP note 1332428 called TroubleShootingGuideEhP1.pdf, go to page 4. The picture in this page is great to show how everything works. There you can see all the connections.
The answer to your question is no, unfortunately. Make sure you follow the "Managed System Configuration" in the solman_setup, this will ensure you have everything that is needed for workload analysis, including SMD Agent.
Please refer to note 1435043 to address what is needed for Workload Analsysis. Managed system configuration fits in item 5 of this note.
I hope this is helpful for you.
Best regards,
Guilherme Balbinot -
Workload analysis (ST03) - weekly report is missing
Hi All,
We have a issue in ST03N transaction. I noticed the daily report for performnce analysis(responce time) is available but it is not available for weekly report. This is happening from last 3 weeks, previously I was getting the response time report for daily, weekly and monthly in tcode st03n. I am quite surprised that now it is only available for daily and monthly but not for weekly. I also checked the job SAP_COLLECTOR_FOR_PERFORMANCE_MONITOR which is running fine. I also trid to check the log from performance monitor collector, where it is only showing error occered Since <date> . There is not much information why the weeklly report is not available.
Is there anything where we can see why this different behaviour in statistics ? Please advice...
Thanks in AdvanceHai,
I guess somebody had reorganised MONI table, means deleted Contents of the Monitoring Database.
If this is the case the system will take sometime to build the values to show in terms of weeks and months.
Please check the below link.....
http://help.sap.com/saphelp_nw70/helpdata/EN/27/930e422dfcdc2ce10000000a1550b0/frameset.htm
Also the check the settings for collecting data for the workload monitor.
Regards,
Yoganand.V -
Pointers to create datasource for Global Spend Analysis
Hi,
I have to extract data for Global Spend Analysis based on data from Financial Accounting from the special ledger created in R/3.The link
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/e8bc39b1702e4d99051ca14e2b769a/frameset.htm
says there are no standard datasources delivered by SAP. Please let me know if anyone has created such a datasource and also how u created it.Please provide me any document you may have to create sucha datasource.
Regards,
Joy
[email protected]Hi,
Reporting solutions will work for other reporting tools also. MDM will provide accurate Master data.
Need of PI?? - MDM accept and syndicate data in form of .xml, flat file (Refer reference guides). PI is helpful to for data transfer as well as monitoring capabilities are also good. I am not sure about BIZTalk's capability to integrate with system's you have in current lanscape. If it is there then you can utilise Biztalk also.
Cheers,
Rc -
E2E Workload: No data/graphic is available
Hi!
I have succcessfully set up SMD.
Unfortunately I can see any data under the E2E Workload tabs.
The job E2E_EXTRACTOR_CONTROLLER runs and retrieves the data for the solution.
Has some one exprerience how to proceed?
P.S. I have SAP Solution Manager 4.0 SP 13
Thank you very much
regards
ThomHi Frederic,
I miss the data as well in Overview (empty graph) as also in in system tab.
Enclosed you will find the E2E_EXTRACTOR_CONTROLLER of portal solution
07.02.2008 E2E: Extractor Controller
1
EC: 07.02.2008 09:05:57 UTC Extractor Controller started for SID
E11
EC: 07.02.2008 10:05:57 CET Installation Number
0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 09:05:57 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 06.02.2008 20 h to 07.02.2008
08 h
RR: Interval (Type e) detected: From 07.02.2008 08 h to 07.02.2008
08 h
ME: 09:05:57 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 09:06:06 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 09:06:06 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 09:06:06 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 31.01.2008 08 h to 07.02.2008
08 h
RR: Interval (Type b) detected: From 05.02.2008 11 h to 07.02.2008
07 h
RR: Interval (Type c) detected: From 05.02.2008 11 h to 07.02.2008
08 h
ME: 09:06:06 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 09:06:07 UTC Receiving return code 1 from
E2E_JAVA_EXTRACTOR_IF
ME: Error:
INTROSCOPE_SQL_EXCEPTION
EC: 09:06:06 UTC Main Extractor raises exception. No Data returned by
extractor.
What do you think: make it perhaps sence to patch SOLMAN to SP 14?
Thank you!
regards
Thom -
Variables for E2E Summary View (SSR Workload)
Hi there,
I have installed the Solution Manager Diagnostics and the Diagnostics Agent on the Solution Manager.
If I choose the Solution Manager and open the Workload Analysis there are no informations. When I go to the "Workload Summary" there appears "Variables for E2E Summary View (SSR Workload) ". If I delete "E2E SID Variable" and click on "Execute", I can see the informations. But when I open the tab "Workload Summary" again, I have to delete the E2E SID Variable again. How can I save this change?
Thanks and best regards,
AndreasHi Andreas,
I've checked the SAP Note and it's not the solution, because we have implement Support Package 24 for Solution Manager
In the EFWK-Administration I can't see any errors .. Yes it's an alternative to do the setup again, but then I have done it for three times on this system
I always believe that the solution manager should make things easier ...
Thanks and best regards,
Andreas
Maybe you are looking for
-
I recently had my hard drive replaced by Apple Care due to a crash. I received my MAC and it's running MAC OS 10.4.9. All of my sound alerts are not happening. I tried resetting my sound preferences and it doesn't work. I ran Disk Utility and repaire
-
Solaris 10 Guest OS in VirtualBox: X-server fails to start
I couldn't find a VirtualBox users/admins forum, so this seemed to be the next best place to post. I installed VBox (2.1.2) on Solaris 10 x86, and then created a Solaris 10 guest. After installing the guest additions package to the Solaris guest the
-
Smartform language translation
Hi all, I am working with a Purchase Order smartform. My requirement is depending on the Vendor language the Smartform should be printed in that particular language. For example if the Vendor language is FI, the smartform should be printed in Finnish
-
Am I to understand if I have multiple artboards, they all will share the same layers? Each artboard does not have it's own separate set of layers, am I right? This is my first time using the artboard feature... CS6.
-
Why is my mac mini slowing dowm
Hi All My Mac Mini I got 8 weeks ago is now so painfully slow that I cannot load Safari or Chrome they just keep churning away and nothing happens. Getting a bit fed up with it actually