Smdb.service refuses to become active on startup.

Deleted.
Last edited by Ezprezo (2012-12-05 22:43:17)

I don't know if this might help you.
I have winbindd.service enabled, i couldn't connect to samba without it and it's not mentioned on the wiki.
Last edited by decaturguy (2012-11-09 22:53:16)

Similar Messages

Program becomes active at startup - don't want it to

I have a program installed by a guy I use to help me with installation of hardware and software on my new IMAC. He has set up a program which becomes active at startup so if needed he can take control of my system. I manually turn this off after system starts up but I would like to remove it from the startup process but don't know how to go about doing that.
Would appreciate advice as to how this can be done.
Thanks

The following is a long shot. You may or may not have this folder: Macintosh HD>Library>Startupitems (folder). Trash the program if it is inside.
Macintosh HD>System>Library>Startupitems (folder). Same as above.
==============
If the above does not work, suggest that you have this friend uninstall what ever it was he installed on your computer. You should then run OS Recovery, repair permissions & restart your comp afterwards.
Apple has a built in program called Screen Sharing that you both can use. Suggest that you research the various Knowledge Base Articles regarding it. Another resource:
How to troubleshoot a friend’s Mac from afar: fix your friend’s Apple Mac remotely with Screen Sharing
Suggest that you check into purchasing OS X Yosemite: The Missing Manual. Very easy reading & very detailed = non technical.
on my new IMAC
FYI only...
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems & your concerns. It's what you paid them to do.
*** While under warranty and/or AppeCare, you do not want to do anything that will void out your warranty. Hopefully, you will consider purchasing AppleCare if you have not already done so. Home tech support/repairs for iMacs if necessary.***
GOOD LUCK!

In Nokia C2 03 As it becomes active the import com...

ENG
Here http://support.ovi.com/osc/pt_PT/service/ovi_on_your_computer/howto/support-suite-manage-your-text-m... the Nokia Explains: to import messages from a CSV-file for Nokia Suite, proceed as follows:
1-Choose > File Import messages.
2-locate and select the CSV file that contains your messages.
3-click OK. Then the messages stored in the file are copied to the Nokia Suite.
And I ask very simply: As it becomes active the import command?
PT
MODERATOR'S NOTE: Non- English part removed from post, this is an English only forum!

As for the problems, try re-installing the Firmware and see if that makes any difference ...
For suggestions, THIS may be a more appropriate channel, the 'Support Discussions' being an User-to-User Forum..

How long for in-app purchases to become active again after submitting an expired paid contract?

We let our paid contract expire and therefore all active in-app purchases stopped working. I just filled it out and it is now in-effect, but does anyone know roughly how long before these in-app purchases will become active again?

Hi ,
I'm very sorry to hear of the problems you have had moving to pay as you go.
Please can you give customer service a call and ask to speak to the pay monthly retentions team who will be able to fix this issue for you.
Click here for contact details.
Thanks
James

Oracle 10.2.0.4.3 - Statspack top 5 timed events show resmgr:become active

Hello All,
In my statspack I am seeing resmgr:decome active 20,009 seconds waiting. We have 8 queue tables and 8 resource group. Is this resource group or queue tables are causing this wait??
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time
resmgr:become active 1,189 20,009 16828 97.4
CPU time 141 .7
control file sequential read 29,319 74 3 .4
os thread startup 73 59 803 .3
DFS lock handle 527 55 104 .3
Regards,
Rashida

You should have a look to the bug #6774317 if that applies to your case.
Nicolas.

Services has timed out at the startup

Hi,
We are running on SAP XI 3.0 SP 21 Windows 2003 with Oracle 10.2.0.2. The problem is that some of the J2EE services cannot be started, at the startup phase, after respecful offline backup. Please find the error, below;
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.xi.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.file.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.mail.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.cpa.svc has timed out > service com.sap.aii.af.cpa.svc start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.ms.svc has timed out > hard reference to service com.sap.aii.af.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.rfc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.bc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service tc~lm~ctc~cul~service_sda has timed out > service tc~lm~ctc~cul~service_sda start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.ispeak.svc has timed out > hard reference to service com.sap.aii.af.ms.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.jdbc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service rfcengine has timed out > hard reference to service ejb. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.jms.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.security.service has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service ejb has timed out > service ejb start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.marketplace.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , 16 services have timed out. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:015 , Sun Jun 13 22:09:22 EEST 2010 Thread[Thread-1] initiated a full thread dump due to: Timed out services:
Service com.sap.aii.af.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.marketplace.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service ejb > service ejb start method invoked.
Service com.sap.aii.af.security.service > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.jms.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service rfcengine > hard reference to service ejb.
Service com.sap.aii.adapter.jdbc.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.af.ispeak.svc > hard reference to service com.sap.aii.af.ms.svc.
Service tc~lm~ctc~cul~service_sda > service tc~lm~ctc~cul~service_sda start method invoked.
Service com.sap.aii.adapter.bc.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.rfc.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.af.ms.svc > hard reference to service com.sap.aii.af.svc.
Service com.sap.aii.af.cpa.svc > service com.sap.aii.af.cpa.svc start method invoked.
Service com.sap.aii.adapter.mail.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.file.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.xi.svc > hard reference to service com.sap.aii.af.cpa.svc.
, Error , /System , com.sap.engine.frame.Environment , ,
06/13/2010 , 22:06:16:453 , deploymentListener registered , Info , , com.sap.tc.lm.ctc.cul.j2eeengine.CULServiceFrame , ,
06/13/2010 , 22:06:16:437 , entering CulServiceFrame.start , Info , , com.sap.tc.lm.ctc.cul.j2eeengine.CULServiceFrame , ,
06/13/2010 , 22:06:15:890 , Configuration util service started successfully. , Info , /System/Server/CTC , com.sap.tc.lm.ctc.confs.service.ServiceFrame , ,
06/13/2010 , 22:06:14:656 , Starting Configuration util service... , Info , /System/Server/CTC , com.sap.tc.lm.ctc.confs.service.ServiceFrame , ,
Consequently, because of those processes were timed out, XI cannot be started, successfully. As a workaround, I am restarting java servers, manually. So, anyone has a suggestion about this problem?
Thank you

Hello Orkun
Ensure that the MaxThreadCount parameter is set to 350 as per note #937159 XI Adapter Engine is stuck. This will help the overall system performance.
Regards
Mark

The submit button in compressor wont become active , even after I assign...

The submit button in compressor wont become active , even after I assign presets and destinations to source files. Ive read compressor help and I cant find anything that relates to this problem. Could anyone please help me out, id really appreciate it.
permahex
IBG4 - MBP Mac OS X (10.4.6)

Please list what exactly you're doing and what versions of the relevant software you're using. All those details do matter.

Port refuses to go active on 5508

We are installing a new 5508 but the management port refuses to go active on the network. It's a new box and just has a base configuration which appears to be identical to a second new box which is working (other than name an IP address). The only difference between the two is the box that is not working uising a 1000BaseSX SFP and the one that is working is using a 1000BaseTX SFP. Looking at the other box through our WCS there is an option to set the physical mode to Full Duplex 1000sx Mbps or Full Duplex 1000 but via the CLI there don't seem to be any port level commands other than enable/disable. Any suggestions?

Found the issue. There was a faulty fibre in the cabinet.

Error accessing Web Services afer a Push Activation

I am facing a strange problem when I try to access a web service after my Midlet is activated via Push Registry: when the stub is trying to invoke the web service, the device (the Wtk 2.2 emulator) asks the permission to use the airtime Internet and, after I press Yes, it does nothing.
When I try to invoke the web service via an user activated Midlet, this problem does not exist and the connection to the web service is established.
I'm using Sun Wtk 2.2, sun Web Services API and the Push Registry. The target devices will work on CLDC 1.1 and MIDP 2.0.
Jorge

Weblogic does not have any such tool to call the web service hosted on remote machine.
However in order to drill down the issue, you can create a standalone class and try to access the remote web service from the same machine where the WLS is installed and the application is deployed.
If the standalone class can access the web service then this is the issue with the WLS configuration for sure.
Thanks,
Sandeep

I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using camera raw 8.2 . How can I get the updated plug in to become active ?

I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using camera raw 8.2 . How can I get the updated plug in to become active ?

Please clarify your version of Photoshop.
There is no CC6.
There is
Photoshop CS6
Photoshop CC
Photoshop CC 2014
Also, what is your operating system?

Network connection slow to become active after waking from sleep.

Using MBP (2007) with OS 10.8.2 I put my machine to sleep each night after work. Each morning when I wake it, the network connection takes over 90 seconds to become active. This is on a WIRED network. Didn't have this problem before Mountain Lion upgrade. Before ML the connection was nearly instant. Any clues?

I am seeing the same issue. I believe it started after upgrading to 10.8.2. (I did not notice such long network reconnections after wake with either 10.8.0 or 10.8.1.) I am also on a wired network. Same result using DHCP and fixed IP.
The network reconnection after wake used to be nearly instantaneous.

When I click from one screen to another, Word becomes active.

Let's say I'm using Mail on my primary display. If I then click on a Safari window on my secondary display, Microsoft Word becomes active. (Its windows come to the front and the menu bar becomes the Word menu bar). I then have to click on the Safari window again to actually use it. Then let's say I click on a Finder window back on my primary display. Again, Word becomes active. Obviously this is a bug. Has anyone else seen it? Does anyone have a solution? Thanks.

I'm suddenly having the same problem. Find a cure yet?

No matter what, I cant get the Device Selector to become active in Netbeans

This is totally frustrating. For the life of me, I cannot get the Device Selector to work
On my Development machine
I've installed all the prerequisites for Java ME SDK 3.3 EA (Early Access) using Raspberry Pi.
Windows 7,
Netbeans 7.3 full bundle with support for ME
Jave ME SDK 3.3 preview
The device address manager is set up
the nb-me-sdk-plugins-uc plugins have all been installed
the j2me platform has been installed under the "Java Platform Manager"
the customer device editor has been set up to simulate my raspberry pi exactly as in the video below
under Installed Plugins, Java ME is active
On my Raspberry Pi
Java ME 3.3 is on my Raspberry Pi
I can run the testuser.sh program
I'm trying to follow along on the Oracle video by Simon Ritter
http://www.youtube.com/watch?v=nA7AMuTK9sE&feature=youtu.be
No matter what I do, I cannot get Tools->Java ME->Device Selector
or Tools->Java ME->Active Device Manager to become active.
I've spent the better part of the day trying to figure this out, and I've had no luck. What am I missing?
Vinnie
Edited by: vdipren on May 25, 2013 7:27 PM

Hello Alexander,
I also tried to install netbeans and Java Me, and got stuck on the same problem as Vinnie: the menu item `Device Selector` is grayed besides most other items in the same menu.
The grayed menu items in menu Netbeans/Tools/Java ME are:
          WMA Console,
          Java ME SDK Update Center,
          Custom Device Skin Creator
          Active Device Manager
The only one that is not grayed is: 'Device Database Search'.
I made sure the device_manager is running. You asked Vinnie to run emulator.exe from the commandline. I did and it outputs the help instructions.
I like to provide you with the log files, but how to do that? They are quite big! Dou you want me to paste the contens of the files in here?
Thanks for giving it your time.
Jan

Firefox does not become active from the Dock when I click on a email link

In OS 10.5, I can temporarily put the Firefox window off to the Dock by clicking on the yellow button in the upper left of the Firefox menu bar. In earlier versions of Firefox, the window would become active again if I clicked on a web link in an email address or document. Firefox 3.6.3 will open a tab for the web link, but stays inactive on the Dock. Why the change?
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.3, I think

Thank you, thank you thank you. This has been driving me crazy forever. I have looked for answers online but never knew to write or that anyone would answer my post so never tried. Whoever you are may lots of good things happen for you because your good deed. Know good karma is coming your way. Just changed the firefox default setting in mailto in applications to my regular email. saves tons of time and much swearing.

Im trying to set up icloud on iphone 4s. when i select icloud in settings it says "account not verified" then a box becomes active saying check mail. I check my mail inbox but theres no activation email?

im trying to set up icloud on my iphone 4s. when i select icloud in settings it says "account not verified" then a box becomes active saying check mail. I check my mail inbox but theres no activation email? any ideas?

Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.

Smdb.service refuses to become active on startup.

Similar Messages

Maybe you are looking for