SMGW deactivated

Hi all!
I have a problem with transaction SMGW in our production system. When I try to run the transaction, I get an error message like this:
"Gateway monitor is deactivated." Looking into the details of the message, and the details show: "Message no. GW102".
I have searched the service.sap.com/notes, and there are no hits. Not in the sdn forum either..
Have anyone come aross this issue before, and how was it solved?
All parameters concerning gw/* have default values, except gw/netstat=0. This was a requirement when installing the production system on an MSCS cluster. Could this have anything to do with this?
Thanks for you help.
Best regards,
Thomas

Hello Thomas,
I found another parameter which may help you
gw/monitor
The documentation says that it  enables monitor commands.
Found the following note:
<a href="https://service.sap.com/sap/support/notes/64016">Note 64016 - Using the SAP Gateway monitor GWMON</a>
Perhaps this one?
Regards, Michael
Message was edited by:
        Michael Teubner

Similar Messages

  • How can I delete an iTunes account that has been deactivated?

    I deleted an old Apple ID with the help of a call to Apple Support.  However, my iphone is still trying to use the old ID.  How do I log out of the old ID and into the new?  Or, how can I delete the old ID when it has already been deactivated?  (Cannot delete with phone)

    Only iTunes Support can potentially delete an account (which would also delete any purchase history for it, so you would no longer be able to authorise that content on a computer, redownload it, and download updates to its apps) : http://www.apple.com/support/itunes/contact/
    Or you could just remove any personal info from it (e.g. payment details if you have any on it) and stop using it

  • HT1918 How do i change my payment to none if i already had a credit card but it is deactivated and no longer works ?

    I had a credit card on file and no longer have the card so it is deactivated and itunes wont allow me to change my payment options to none until i receive my new card and can use it . Please help!!

    How to update my credit card information

  • Adobe Creative Suite 2 Will not work after deactivation

    First off, I don't get this company. I had to let that out.
    I had an issue I started out with by not knowing which computer had my Adobe Photoshop on so I ended up Googling an answer over how to deactivate my product. It led me to a chat with a representative:
    Please visit http://www.adobe.com/support/contact if there are more questions for Adobe. Thank you.
    General Info
    Chat start time
    Jul 12, 2014 2:37:37 PM EST
    Chat end time
    Jul 12, 2014 2:49:01 PM EST
    Duration (actual chatting time)
    00:11:24
    Operator
    Pavithra
    Chat Transcript
      info:  Hi, we are currently helping other customers in line ahead of you. We'll be with you as soon as possible.
    While you wait, you can try our community forums where experts are online 24/7.
      info: You are now chatting with Pavithra. To ensure we stay connected throughout our interaction , please don't click on the 'x' in the chat window. Doing so will disconnect our chat session.
      Pavithra: Hello! Welcome to Adobe Customer Service.
      Pavithra: Hi Preston.
      Preston: Hi!
      Pavithra: I understand that you would like to deactivate the software.
      Pavithra: I will be glad to check and help you with this issue.
      Preston: Yes, as its causing a headache for me to use on this computer and I don't know which one it was previously on.
      Pavithra: May I please have the serial number of the product, so that I can assist you better?
      Preston: Yes, serial #
      Pavithra: Thank you for the serial number.
      Pavithra: Adobe has disabled the activation server for CS2 applications, including Acrobat 7 and Audition 3, because of a technical issue.
      Pavithra: CS2 applications require activation to run. To run a CS2 application, uninstall your existing CS2 application and install a special version that does not require activation. You cannot reinstall from your original discs.
      Pavithra: Click here to know more :
      Pavithra: Click on the above link and follow the steps to locate the serial number as well as the download link for CS 2 or Acrobat 7 software.
      Pavithra: If you still have any issues with installation and download of CS 2 from the above link please visit forum.
      Pavithra: Click here to visit forum :
      Pavithra: Is there anything else I can help you with?
      Preston: Nope, so my old discs won't allow me to use it anymore?
      Pavithra: No Preston, Adobe has disabled activation server for CS 2 softwares.
      Preston: When I click to uninstall it says Start Activation Transfer? I guess I had it on this computer but it still sees I had activated on another computer. . .
      Pavithra: If you wish to activate the software on new computer you can use the above link.
      Preston: Not sure which to go for: Skip Transfer or Start Transfer? I want it on my desktop I'm currently using for this.
      Preston: So Start Transfer then?
      Pavithra: Well in this case please visit forum to fix your issue.
      Preston: Okay.
      Preston: Thanks for your assistance!
      info: Your chat transcript will be sent to (my email) at the end of your chat.
      Pavithra: You are welcome.
      Pavithra: Thank you for contacting Adobe.  We are available 7 days a week, 24 hours a day. Goodbye!
    After doing what she asked, I deactivated, and uninstalled my Adobe Creative Suite 2. Everything. So after all this, I reinstalled, entered in the new serial I got through their webpage for the special version after creating an Adobe ID. Guess what? After an unpleasant re-installation process (there is three downloaded parts you have to download for CS2 in which disc2 and disc3 are set on a default path that is separate from disc1 which you need to converge being it creates two folders with similar naming structures), and I ended up opening Adobe Photoshop only to find it say the very same thing I meant to avoid: your serial, name, organization, yadha, yadha, is incorrect/missing. Adobe will now close.
    So frustrated with this company, and its support.

    Well, now I cannot reproduce the error because I cannot install it again! Woohoo! For some reason, all three discs executables try installing the folders, files, etc... into a different folder making it when I try installing CS2 impossible since it asks for Disc 2, Disc 3, etc..
    ANYWAY, my main issue was began with when I somehow managed to install it correctly, I got the very same message I contacted you guys over: Adobe Photoshop will now close because missing serial number something like that, and following it saying it will close.

  • I deactivated my student edition of CS6 Design and Web Premium, go to activate it on my new computer and serial code is invalid.

    I downloaded the design and web premium, and entered a serial code to start it as the full version. However, after the install, it asked me for my serial code again. I entered it, and it didn't work. I tried registering my serial code on the adobe site, and it says it's invalid. My school gave it to me last year and it worked fine on my old computer. In that time, creative cloud came out and trials stopped being available as they were before. How I got it before was installing the trial, then activating it with my code. I have a PC and am running windows 7. My laptop is old and really just not up for the games I play or designing anymore, so I built a desktop. Successfully deactivated it, why can't I get it on my new computer? I am able to open the software as a trial, but I want to activate it. The error message I get in-program is "this serial number is not valid for adobe indesign/photoshop/illustrator CC 2014." Any suggestions?

    if you're being asked for two serial numbers, you're probably using an upgrade serial number at the first prompt and the second prompt is probably for the serial number of a previous version.
    otherwise, Error "The serial number is not valid for this product" | Creative Suite

  • How to download Creative Cloud on new computer after deactivating on another computer?

    I need to switch a Creative Cloud license from one computer to another. I deactivated the license via the CC Desktop App and then uninstalled it from the first computer. Now I want to download it on the other computer and activate. The Adobe website does not make it easy to figure out how to do that. Their standard help page only got me as far as deactivation from the first computer. Can someone tell me how to download it? The company I work for already has a license paid for.

    Exactly the same way you did the 1st time... log in to your Adobe ID and start
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
    -Install, update or UNinstall, and launch after installing

  • My iPhone 5s keeps deactivating itself.

    Let it first be said that I jumped in a pool with my iPhone 5s. I was able to open it up, dry it out, and it was functioning fine until I left it out in a rainstorm. At first, everything was fine, but I started noticing that a few things were amiss. I could listen to my iPhone with earphones, but was not getting full sound out of my Apple earphones with a mic. Also, Bluetooth would work for Siri, but not for a phone call. I don't know where the signal went, I couldn't hear anything until I went back to the iPhone. Finally, since I upgraded to 8.0.2 my phone keeps deactivating itself and can't keep a good cellular signal. Of course, by now I've messed around inside my phone several times. Anyone?

    Someone else may be able to offer suggestions, but my best guess is the water has permanently damaged some components. The only solution is to replace your phone.
    Seeing as you've worked on it yourself, Apple will not sell you an out of warranty replacement. You would have to pay full price for a phone.
    You may want to seek help over at ifixit.com to see if anyone there has had similar issues/can suggest parts to try replacing.
    ~Lyssa

  • Hard disk system failed before deactivation de Prem Pro cs3 legal

    tout est dans le titre.le contact telephone me repond qu'il ne prend plus en charge le produit!
    la deactivation a ete impossible,bien sur
    merci pour ceux qui savent!
    MAURICE

    ask for an activation count reset from adobe support.
    contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • How do I use my deactivated Droid 2 as a media player?

    I know it's possible, because I used it for a while after I got my iphone and then my son used it with his number temporarily  when he broke his phone, I've restored it to factory settings but can't get past the activation screen. Can't I use the device with wifi without activating it? Or is this expensive device good for nothing since no one wants to use it as a phone. I'd like to use it as an alarm clock/media player but how do I do that? I called Verizon support and she told me it isn't possible but I'm not willing to give up that easily. Help please! Save this device from the landfill! TIA, L.

    Sure wish I was more patient. What I ended up doing was temporarily reactivating the phone since I knew it worked after I initially stopped using it. I downloaded the apps I wanted then I turned it off and reactivated my iphone. All appears to be well but I will file your instructions away for possible future reference. Thanks a bunch!
    Date: Sun, 10 Feb 2013 15:48:20 -0700
    From:
    To: >Personal email address deleted<
    Subject: Re: How do I use my deactivated Droid 2 as a media player? - Re: How do I use my deactivated Droid 2 as a media player?
                                                                                    Re: How do I use my deactivated Droid 2 as a media player?
        created by tikibar1 in DROID & DROID 2 by Motorola - View the full discussion
    See if this works to bypass the activation screen: On the Welcome screen with the 'touch the Android to begin' icon, tap each of the four corners of the screen, starting with the top left, i.e.:- Tap the top left corner of the screen, then- Tap the top right corner of the screen, then- Tap the bottom right corner of the screen (just above the grey bar), then- Tap the bottom left corner of the screen (just above the grey bar) Wait a few seconds and you should see the home screen
    Message was edited by: Verizon Moderator

  • How do I get a licence deactivated that is on a dead computer

    I purchased a few years ago CS4 - I still have one licence active another was not deactivated by my ex husband who sold his laptop and the third was on a hard drive that was replaced and the licence not deactivated. I need a copy on my macbook pro that has the new hard drive. But it would be that all three licences are active when in fact they aren't.  Is it possible to have adobe deactivate the other two if I can give them the serial number of my computer?
    My disc is also in storage in one of about 70 boxes - is it possible to do all of this without the disc or the key? I could possibly find it but it will be no easy feat!
    And last question is it possible to back up my photoshop with all of my presets actions and brushes I have created? I have read this is impossible.
    Ohhh and also is there anyway of actually contacting Adobe??? There appears to be no email or phone number in support.
    Thanks :-)

    Contact Adobe support thru chat.  They can manage deactivations for inaccessible installations.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Back end activities for Activation & Deactivation of Aggregates

    Hi ,
    Could any body help me to understand the back-end activites performed at the time of activation and deactivation of aggregates.
    Is filling of Agreegate is same as Roll up?
    What is the diffrence between de-activation and deletion of Aggregate?
    Thanks.
    Santanu

    Hi Bose,
    Activation:
    In order to use an aggregate in the first place, it must be defined activated and filled.When you activate it, the required tables are created in the database from theaggregate definition. Technically speaking, an aggregate is actually a separate BasicCube with its own fact table and dimension tables. Dimension tables that agree with the InfoCube are used together. Upon creation, every aggregate is given a six-digit number that starts with the figure1. The table names that make up the logical object that is the aggregate are then derived in a similar manner, as are the table names of an InfoCube. For example, if the aggregate has the technical name 100001, the fact tables are called: /BIC/E100001 and /BIC/F100001. Its dimensions, which are not the same as those in the InfoCube,have the table names /BIC/D100001P, /BIC/D100001T and so on.
    Rollup:
    New data packets / requests that are loaded into the InfoCube cannot be used at first for reporting if there are aggregates that are already filled. The new packets must first be written to the aggregates by a so-called “roll-up”. In other words, data that has been recently loaded into an InfoCube is not visible for reporting, from the InfoCube or aggregates, until an aggregate roll-up takes place. During this process you can continue to report using the data that existed prior to the recent data load. The new data is only displayed by queries that are executed after a successful roll-up.
    Go for the below link for more information.
    http://sapbibw2010.blogspot.in/2010/10/aggregates.html
    Naresh

  • SMGW, gateway monitoring not working

    hi team,
    when i try to run the Tx SMGW, i get an pop up with a message "connection could not be established to local gateway" (hostname sapgw10)
    i tried to telnet to the host and it returns blank to the prompt after few seconds. [ECC6.0, WIN 2003, MSSQL]
    D:\usr\sap\DV2\SYS\exe\uc\NTI386>gwmon -v
    Connect to gateway on host OSISAP01, service sapgw00 failed
    ERROR       partner '10.20.40.21:sapgw00' not reached
    TIME        Fri Jan 02 01:14:18 2009
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2823
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER     1
    could someone let me know the roadmap to troubleshoot the issue.
    the log of the dev_rd as follows.
    trc file: "dev_rd", trc level: 1, release: "700"
    Mon Dec 15 19:31:56 2008
    ***LOG S00=> GwInitReader, gateway started ( 2552) [gwxxrd.c     1757]
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    150
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        2552
    gateway runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
    gateway (version=700.2007.02.22)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Bind service sapgw10 (socket) to port 3310
    GwPrintMyHostAddr: my host addresses are :
      1 : [10.20.40.21] OSISAP01.OptimalSol.com (HOSTNAME)
      2 : [127.0.0.1] OSISAP01.OptimalSol.com (LOCALHOST)
    Full qualified hostname = OSISAP01.OptimalSol.com
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    Mon Dec 15 19:31:57 2008
    DpShMCreate: sizeof(wp_adm)          31440     (1572)
    DpShMCreate: sizeof(tm_adm)          4401096     (21896)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1544)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 07630040, size: 5073928)
    DpShMCreate: allocated sys_adm at 07630040
    DpShMCreate: allocated wp_adm at 07632098
    DpShMCreate: allocated tm_adm_list at 07639B68
    DpShMCreate: allocated tm_adm at 07639B98
    DpShMCreate: allocated appc_ca_adm at 07A72120
    DpShMCreate: allocated comm_adm at 07A74060
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 07AF4F20
    DpShMCreate: allocated gw_adm at 07AF4F60
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 07AF4F90
    MtxInit: -2 0 0
    Mon Dec 15 19:32:26 2008
    GwDpInit: attached to gw_adm at 07AF4F60
    Wed Dec 17 00:20:10 2008
    ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
    ERROR => NiPConnect2: SiPeekPendConn failed for hdl 12 / sock 1412
        (SI_ECONN_REFUSE/10061; I4; ST; 10.20.40.17:3301) [nixxi.cpp    2823]
    LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
    ERROR       partner 'dalnas1.optimalsol.com:sapgw01' not reached
    TIME        Wed Dec 17 00:20:10 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2823
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER     1638
    GwTraceHdlInfo:
    HANDLE   = 12  
    TIME     = Wed Dec 17 00:20:09 2008
    SOCKET   = 1412
    STAT     = NI_CONN_WAIT
    TYPE     = STREAM IPv4
    OUT      = 0 messages 0 bytes
    IN       = 0 messages 0 bytes
    LOCAL    = 0.0.0.0:3104
    REMOTE   = -
    OPTIONS  = BUFFERED
      ni hdl      = 12
      type        = CLIENT
      net_stat    = CONNECT_TO_REM_GW_PENDING
      hostaddr    = 10.20.40.17
      opcode      = NORMAL_CLIENT
      conn opcode = REMOTE_GATEWAY
      conn vers   = 0
      index       = 140
      data        = 00000000
      ext_info    = 014A2060
      offset      = 0
      rest_len    = 0
      snc_forced  = 0
    remote gateway infos:
      hostname =
      hostaddr = 10.20.40.17
      service  = sapgw01
      tpname   = sapdp01
    Wed Dec 31 03:54:49 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    Wed Dec 31 03:54:50 2008
    ERROR => NiIRead: SiRecv failed for hdl 10 / sock 1440
        (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4830) [nixxi.cpp    4424]
    ***LOG S23=> GwIDisconnectClient, client disconnected (048) [gwxxrd.c     11658]
    ***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
    ***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
    ***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
    LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
    ERROR       connection to partner 'osisap02:4830' broken
    TIME        Wed Dec 31 03:54:49 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -6
    MODULE      nixxi.cpp
    LINE        4424
    DETAIL      NiIRead
    SYSTEM CALL recv
    ERRNO       10054
    ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    COUNTER     20753
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 11 / sock 1432
        (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4834) [nixxi.cpp    4424]
    ***LOG S23=> GwIDisconnectClient, client disconnected (050) [gwxxrd.c     11658]
    ***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
    ***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
    ***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
    LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
    ERROR       connection to partner 'osisap02:4834' broken
    TIME        Wed Dec 31 03:54:50 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -6
    MODULE      nixxi.cpp
    LINE        4424
    DETAIL      NiIRead
    SYSTEM CALL recv
    ERRNO       10054
    ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    COUNTER     20756
    WARNING => NiGetHdlParamEx: invalid hdl 11 [nixx.c       2498]
    main: ignore type 0
    main: NiSelNext (ni_hdl=16, read=1, write=1, connect=0, hdl_info=07230448)
    request from CLIENT
    GwRequest: request from client 68
    GwGetMemory: allocated 073BFFB0 (len=34615)
    NiHsLGetHostName: found address 10.20.40.20 in cache
    NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 16 / sock 1372
        (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4952) [nixxi.cpp    4424]
    Adresse   Offset  bad request
    GwSaveErrInfo2: save err info (240)
    ***LOG S23=> GwIDisconnectClient, client disconnected (068) [gwxxrd.c     11658]
    ***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
    ***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
    ***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
    LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
    ERROR       connection to partner 'osisap02:4952' broken
    TIME        Wed Dec 31 03:54:50 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -6
    MODULE      nixxi.cpp
    LINE        4424
    DETAIL      NiIRead
    SYSTEM CALL recv
    ERRNO       10054
    ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    COUNTER     20760
    GwSaveErrInfo: save err info (240)
    GwSysErr: delete conn 7 (94444887)
    GwIDelR3Conn: send error message to server
    GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
    GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
    LOCK APPC ca_blk 6
    DpGetCpicCommIdx: found index 7 via appc_hdr
    found comm entry 7 (tid/uid/mode/conv_id/a_r: 29/68/0/94444887/0)
    GwFiSearchConvId: deleted 94444887 local, conn=7
    GwRqDpSendTo: send close (bad rc or deallocate)
    GwInitLocCommAdmEntry: init gw_comm_adm entry 7
    GwListRemove: elem 7 not in comm_write_list
    GwListRemove: elem 7 not in comm_wait_list
    GwInitLocCommAdmEntry: 0 waiting writes to rem gw
    make DISP owner of appc_ca_blk 6
    DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14778)
    GwDispWakeUp: send wakeup with ni handle 1
    NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
    -OUT- sender_id APPC_SERVER       tid  29    wp_ca_blk   -1      wp_id -1
    -OUT- action    SEND_TO_WP        uid  68    appc_ca_blk 6       type  NOWP
    -OUT- new_stat  NO_CHANGE         mode 0     len         320     rq_id 14778
    GwIDelR3Conn: decrement conv_no of client 0: 0
    GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 7 from conv-table
    GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 2/2/0
    GwClearConn: free err info
    GwClearConn: free r3 conv info
    GwClearConn: free buffer info
    GwClearConn: free frag overflow area
    GwFiSearchConvId: not found 94444887 (remove=1)
    GwListInsert: insert elem 7 into conn_free_list (at begin)
    GwListInsert: 498 elems in conn_free_list
    GwListRemove: elem 7 not in conn_search_list
    GwListRemove: elem 7 not in conn_write_list
    GwListRemove: remove elem 7 from conn_inuse_list
    GwListRemove: 2 elems in conn_inuse_list
    GwSelClear: clear RWC for hdl 16
    NiICloseHandle: shutdown and close hdl 16 / sock 1372
    GwIFreeMemForLU_TP: freed memory for sys 68
    GwListRemove: elem 68 not in sys_r3_list
    GwListRemove: elem 68 not in sys_reg_list
    GwListRemove: remove elem 68 from sys_inuse_list
    GwListRemove: 4 elems in sys_inuse_list
    GwUpdateClient: act_sys: 4
    GwIDisconnectClient: client 68 disconnected
    GwFreeMemory: free 073BFFB0 (len=34615)
    WARNING => NiGetHdlParamEx: invalid hdl 16 [nixx.c       2498]
    main: ignore type 0
    main: NiSelNext (ni_hdl=12, read=1, write=1, connect=0, hdl_info=07230348)
    request from CLIENT
    GwRequest: request from client 85
    GwGetMemory: allocated 073BFFB0 (len=34615)
    NiHsLGetHostName: found address 10.20.40.20 in cache
    NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 12 / sock 1396
        (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:1664) [nixxi.cpp    4424]
    Adresse   Offset  bad request
    GwSaveErrInfo2: save err info (240)
    ***LOG S23=> GwIDisconnectClient, client disconnected (085) [gwxxrd.c     11658]
    ***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
    ***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
    ***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
    LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
    ERROR       connection to partner 'osisap02:1664' broken
    TIME        Wed Dec 31 03:54:50 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -6
    MODULE      nixxi.cpp
    LINE        4424
    DETAIL      NiIRead
    SYSTEM CALL recv
    ERRNO       10054
    ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    COUNTER     20764
    GwSaveErrInfo: save err info (240)
    GwSysErr: delete conn 3 (99889818)
    GwIDelR3Conn: send error message to server
    GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
    GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
    LOCK APPC ca_blk 7
    DpGetCpicCommIdx: found index 8 via appc_hdr
    found comm entry 8 (tid/uid/mode/conv_id/a_r: 36/283/0/99889818/0)
    GwFiSearchConvId: deleted 99889818 local, conn=3
    GwRqDpSendTo: send close (bad rc or deallocate)
    GwInitLocCommAdmEntry: init gw_comm_adm entry 8
    GwListRemove: elem 8 not in comm_write_list
    GwListRemove: elem 8 not in comm_wait_list
    GwInitLocCommAdmEntry: 0 waiting writes to rem gw
    make DISP owner of appc_ca_blk 7
    DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14779)
    GwDispWakeUp: send wakeup with ni handle 1
    NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
    -OUT- sender_id APPC_SERVER       tid  36    wp_ca_blk   -1      wp_id -1
    -OUT- action    SEND_TO_WP        uid  283   appc_ca_blk 7       type  NOWP
    -OUT- new_stat  NO_CHANGE         mode 0     len         320     rq_id 14779
    GwIDelR3Conn: decrement conv_no of client 0: 0
    GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 3 from conv-table
    GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 1/1/0
    GwClearConn: free err info
    GwClearConn: free r3 conv info
    GwClearConn: free buffer info
    GwClearConn: free frag overflow area
    GwFiSearchConvId: not found 99889818 (remove=1)
    GwListInsert: insert elem 3 into conn_free_list (at begin)
    GwListInsert: 499 elems in conn_free_list
    GwListRemove: elem 3 not in conn_search_list
    GwListRemove: elem 3 not in conn_write_list
    GwListRemove: remove elem 3 from conn_inuse_list
    GwListRemove: 1 elems in conn_inuse_list
    GwSelClear: clear RWC for hdl 12
    NiICloseHandle: shutdown and close hdl 12 / sock 1396
    GwIFreeMemForLU_TP: freed memory for sys 85
    GwListRemove: elem 85 not in sys_r3_list
    GwListRemove: elem 85 not in sys_reg_list
    GwListRemove: remove elem 85 from sys_inuse_list
    GwListRemove: 3 elems in sys_inuse_list
    GwUpdateClient: act_sys: 3
    GwIDisconnectClient: client 85 disconnected
    GwFreeMemory: free 073BFFB0 (len=34615)
    WARNING => NiGetHdlParamEx: invalid hdl 12 [nixx.c       2498]
    main: ignore type 0
    main: NiSelNext (ni_hdl=23, read=1, write=1, connect=0, hdl_info=07230608)
    request from CLIENT
    GwRequest: request from client 144
    GwGetMemory: allocated 073BFFB0 (len=34615)
    NiHsLGetHostName: found address 10.20.40.20 in cache
    NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 23 / sock 1272
        (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4678) [nixxi.cpp    4424]
    Adresse   Offset  bad request
    GwSaveErrInfo2: save err info (240)
    ***LOG S23=> GwIDisconnectClient, client disconnected (144) [gwxxrd.c     11658]
    ***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
    ***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
    ***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
    LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
    ERROR       connection to partner 'osisap02:4678' broken
    TIME        Wed Dec 31 03:54:50 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -6
    MODULE      nixxi.cpp
    LINE        4424
    DETAIL      NiIRead
    SYSTEM CALL recv
    ERRNO       10054
    ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    COUNTER     20768
    GwSaveErrInfo: save err info (240)
    GwSysErr: delete conn 12 (37288997)
    GwIDelR3Conn: send error message to server
    GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
    GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
    LOCK APPC ca_blk 8
    DpGetCpicCommIdx: found index 10 via appc_hdr
    found comm entry 10 (tid/uid/mode/conv_id/a_r: 28/561/0/37288997/0)
    GwFiSearchConvId: deleted 37288997 local, conn=12
    GwRqDpSendTo: send close (bad rc or deallocate)
    GwInitLocCommAdmEntry: init gw_comm_adm entry 10
    GwListRemove: elem 10 not in comm_write_list
    GwListRemove: elem 10 not in comm_wait_list
    GwInitLocCommAdmEntry: 0 waiting writes to rem gw
    make DISP owner of appc_ca_blk 8
    DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14780)
    GwDispWakeUp: send wakeup with ni handle 1
    NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
    -OUT- sender_id APPC_SERVER       tid  28    wp_ca_blk   -1      wp_id -1
    -OUT- action    SEND_TO_WP        uid  561   appc_ca_blk 8       type  NOWP
    -OUT- new_stat  NO_CHANGE         mode 0     len         320     rq_id 14780
    GwIDelR3Conn: decrement conv_no of client 0: 0
    GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 12 from conv-table
    GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 0/0/0
    GwClearConn: free err info
    GwClearConn: free r3 conv info
    GwClearConn: free buffer info
    GwClearConn: free frag overflow area
    GwFiSearchConvId: not found 37288997 (remove=1)
    GwListInsert: insert elem 12 into conn_free_list (at begin)
    GwListInsert: 500 elems in conn_free_list
    GwListRemove: elem 12 not in conn_search_list
    GwListRemove: elem 12 not in conn_write_list
    GwListRemove: remove elem 12 from conn_inuse_list
    GwListRemove: 0 elems in conn_inuse_list
    GwSelClear: clear RWC for hdl 23
    NiICloseHandle: shutdown and close hdl 23 / sock 1272
    GwIFreeMemForLU_TP: freed memory for sys 144
    GwListRemove: elem 144 not in sys_r3_list
    GwListRemove: elem 144 not in sys_reg_list
    GwListRemove: remove elem 144 from sys_inuse_list
    GwListRemove: 2 elems in sys_inuse_list
    GwUpdateClient: act_sys: 2
    GwIDisconnectClient: client 144 disconnected
    GwFreeMemory: free 073BFFB0 (len=34615)
    WARNING => NiGetHdlParamEx: invalid hdl 23 [nixx.c       2498]
    main: ignore type 0
    main: NiSelNext (ni_hdl=9, read=1, write=0, connect=0, hdl_info=07230288)
    request from CLIENT
    GwRequest: request from client 113
    GwGetMemory: allocated 073BFFB0 (len=34615)
    NiHsLGetHostName: found address 10.20.40.21 in cache
    NiIGetHostName: addr 10.20.40.21 = hostname 'OSISAP01.OptimalSol.com'
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 9 / sock 1460
        (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.21:4191) [nixxi.cpp    4424]
    Adresse   Offset  bad request
    GwSelClear: clear RWC for hdl 9
    NiICloseHandle: shutdown and close hdl 9 / sock 1460
    GwUpdateClient: act_reg: 20403
    GwIFreeMemForLU_TP: freed memory for sys 113
    GwUpdateClient: act_reg: 20402
    GwListRemove: elem 113 not in sys_r3_list
    GwListRemove: remove elem 113 from sys_reg_list
    GwListRemove: 0 elems in sys_reg_list
    GwListRemove: remove elem 113 from sys_inuse_list
    GwListRemove: 1 elems in sys_inuse_list
    GwUpdateClient: act_sys: 1
    GwIDisconnectClient: client 113 disconnected
    GwFreeMemory: free 073BFFB0 (len=34615)
    GwReadReqIndex: (process_id: -1)
    GwReadReqIndex: no filled request-index-block

    Hai,
    Please check the link below...
    http://help.sap.com/saphelp_nw04/helpdata/en/bb/9f13194b9b11d189750000e8322d00/frameset.htm
    If you have a stand alone gateway on WINDOWS then you can kill the process and start it again, if you have installed together with your Instance then you should restart the whole Instance.
    Killing the process gwrd and then starting or forcing it to start will not work (waste of time), I have had the similar problem sometime back but on UNIX. I guess it will be same in WINDOWS as well.
    So the better way is to restart the whole Instance.
    Regards,
    Yoganand.V

  • HT1420 Hi I am trying to sync my pone but wont allow me to transfer music purchased on the phone. States I have 5 authorised computers on my account but when i  logg into my account it only identifies 1 so i carn't deactive?  trying to backup data to put

    Hi I am trying to sync my ip3 but wont allow me to transfer music purchased on the phone to itunes on the laptop. States I have 5 authorised computers on my account but when i  logg into my itunes account it only identifies 1 so i carn't deactive all to start again? I am trying to backup data fom myip3 to put on ip4 so carnt even complete sync atm Any ideas on what to do??

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. 
    If your sister doesn't know the password for her old ID, and if her old ID is an earlier version of her current ID, she needs to temporarily recreate the old ID so you can delete if from your phone using her current password.  To do this, have her go to https://appleid.apple.com, click Manage my Apple ID and sign in with her current iCloud ID.  Click edit next to the primary email account, change it back to her old email address and save the change.  Then edit the name of the account to change it back to her old email address.  You can now use the password for her current ID to turn off Find My iDevice on your device, even though it prompts you for the password for her old account ID.  After you do this, Next, have your sister recreate her current ID again by going back to https://appleid.apple.com and changing her primary email address and iCloud ID name back to the way it was.
    Then your can save any photo stream photos that you wish to keep to the camera roll on your device, then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted.  You will be prompted to either keep or delete the iCloud data from your device.  If the data is already in another account you can choose Delete.  If you need to migrate it to another account, choose Keep, then choose Merge when signing into the new account.

  • Payment Method Supplement Check Deactivation in F110 for already posted doc

    Hi,
    Is there a way to Payment Method Supplement Check Deactivation in F110 for already posted documents.
    The background: Some invoices are posted for a vendor when there is a pmt supplmnt method "L-large". Subsequently payment method supplement in vendor master was changed to 'S'. There is debit note posted with pmt method supp 'S' in document. Now while doing F110 system is splitting up the payments based on pmt method supplmt and theline item with debit balance is going in error because of debit balance. As a result the debit balance is not getting knocked off with the credit balance line item.
    Request you to help us in finding out if there is any way to generate onlyone line item in F110. Please rule out the option of changing the pmt supplmt at document level.
    Regards,
    nikhil

    Hi Nikhil,
    If you are not changing the payment supplement in the document, F110 itself will not allow you to change that. You can possibly deactivate the Payment method temporarily in customizing, run the F110 with only the affected vendors. and activate back the payment method supplement in customizing. You can activate this under APP customizing (FBZP) "All company codes" under the control data section
    Ron

  • Batch management Deactive

    Dear All..
                   I want to deactive batchmanagement for a material for a plant.
    Even stock is zero in current period and perivious period also. and there is no open documents exist i.e Open sale order,delivery,open PO and all..
    at the time of de activation in material master its saying " Batched already Exist"
    Even i have deleted the batch through Msc2n at plant level..
    Please give your valuable suggestions and guideness.
    Regards
    P.Anandhakumar.

    Hi,
    You have to archive the batch master records.
    Csaba

Maybe you are looking for