SMIGR_CREATE_DDL not generating any files

Dear Experts,
We are running the report SMIGR_CREATE_DDL on windows 2003 32bit ECC5.0 Oracle 11.2g System to do a homogeneous system copy to a windows 64bit machine .
When I go to this program it not allowing me to choose any options under database version for Oracle.
Can any one help me how to get over this issue. Our current patch levels are as follows:
SAP_BASIS     640     0015     SAPKB64015
SAP_ABA     640     0015     SAPKA64015
ST-PI     2005_1_640     0003     SAPKITLQH3
PI_BASIS     2005_1_640     0006     SAPKIPYJ66
SAP_BW     350     0015     SAPKW35015
SAP_HR     500     0017     SAPKE50017
SAP_APPL     500     0011     SAPKH50011
Thanks
Pradeep.G

Hi,
This report execution not mandatory for homoginious system copy. If you are doing the BW/BI system copy it's mandatory.
Even we are doing upgrade come unicode conversion (5TB database).. we were not ran this report.
So in your case you can ignore this report.
Thanks and Regards,
Jibin.

Similar Messages

Parameter issue - report not generating any pdf files

Hi All,
I'm trying to run a report which generates pdf files. Is there any limitation on the parameter string size? For one of the parameter values - '11F EA Accept nonhonor ASnSOMnSON_20091201090150846' the report is not generating any pdf files. I assumed the reason is of the keyword 'AS' in it and created another parameter value - '11F EA Accept nonhonor AnS-SOM-SON_20091202074331997', but it is also not generating any pdf files. I get this message from Adobe Reader " There was an error opening this document. This file cannot be opened because it has no pages. " The report is working normally when i hardcode the same parameter values into the logic. Any suggestions on this?
Thanks.
Edited by: user1049091 on Dec 2, 2009 9:17 AM
Edited by: user1049091 on Dec 2, 2009 12:37 PM

Tim,
That report is working normally for all the parameter values, except this one. It is not working only if i pass the value - ''11F EA Accept nonhonor ASnSOMnSON_20091201090150846' as a parameter. It is generating the pdf files when i hardcode the same value into sql query logic in the data template, instead of passing it as a parameter. Please advise.
Thanks.

EDI X12 scenario,deq.bat file not generating any trace file.

hello,
i have worked on the EDI X12 over internet(AS2) Transaction,everything is working fine until the creation and deployment of configurations on both Acme and GlobalChips servers.But During the Verification of Purchase Order Transactions when i am running deq.bat file on both Acme and GlobalChips servers the dq script is not generating any t1.trc trace file.
There is no problem with the Trading Partners on both servers they are on upstate,can anyone help me with this issue please,its very urgent.
note: where will be the web.xml file for transportServlet located,can anyone provide me with the file path.
thnx
sunny

Hello Sinkar,
Thanks for your reply,Finally i have managed resolve the issue(deq.bat file is generating t1.trc file) successfully.But there are certain other issues regarding this topic in which i need your help.
When i am running the deq.bat file in command prompt on both acme and globalchips servers it is showing the following status
D:\oracle\OraJ2EE\ip\tutorial\X12\runtime>deq.bat
D:\oracle\OraJ2EE\ip\tutorial\X12\runtime>java oracle.tip.adapter.b2b.data.IPDeq
ueue ipdequeue.properties
IPDequeue start...
Dequeue from IP_IN_QUEUE
and it also generated a t1.trc file on both servers,but the prompt in which i have run deq.bat is not giving any further message
i.e some thing like IPDequeue end.
and not even coming back to the original path i.e
D:\oracle\OraJ2EE\ip\tutorial\X12\runtime>
and even if close the prompt it is not showing anything in t1.trc file and if i am running the enq_850.bat in acme server it is showing following stat
D:\oracle\OraJ2EE\ip\tutorial\X12\runtime>enq_850.bat
D:\oracle\OraJ2EE\ip\tutorial\X12\runtime>java oracle.tip.adapter.b2b.data.IPEnq
ueue enq_850.properties
IPEnqueue start...
IPEnqueue end.
D:\oracle\OraJ2EE\ip\tutorial\X12\runtime>
and its didn't showing anything in the t1.trc file generated on the globalchips server and same thing is happening when i am running enq_855.bat file on the globalchips server its not showing up anything in the trace file generated on the acme server.
I have tried one thing that u have suggested for such kind of issue(t1.trc empty) in your forums
1.) I have applied the patch #6673231 and it is showing the Document Routing Id Field in the B2B UI,but when i am completing all the process in B2B UI and running deq.bat file the result is still the same,the IPDequeue is not ending
But a certain change has taken place after applying the pat
D:\oracle\OraJ2EE\ip\tutorial\X12\runtime>java oracle.tip.adapter.b2b.data.IPEnq+
ueue enq_850.properties+
IPEnqueue start...+
Action Name = null
IPEnqueue end.+
D:\oracle\OraJ2EE\ip\tutorial\X12\runtime>+
C:\oracle\OraJ2EE\ip\tutorial\X12\runtime>enq_855.bat+
C:\oracle\OraJ2EE\ip\tutorial\X12\runtime>java oracle.tip.adapter.b2b.data.IPEnq+
ueue enq_855.properties+
IPEnqueue start...+
Action Name = null
IPEnqueue end.+
C:\oracle\OraJ2EE\ip\tutorial\X12\runtime>+
I Think that no action is taking place in both the cases
bcoz its showing this Action Name = null+
if that is the case what is the problem here
I have also set oracle.tip.adapter.b2b.DocumentRouting=true.
but the situation is still the same,please read the above problem carefully and suggest a solution which would be fruitful for my further progress.
thanks
sunny
Edited by: user10470973 on Dec 16, 2008 10:43 AM
Edited by: user10470973 on Dec 16, 2008 10:44 AM

Dac not generating paramter files for unspecified mapping in one workflow

Hi,
We are facing a problem with DAC while generating parameter files.I have a task in DAC which is calling a workflow(It contains two sessions,1.SILOS mapping,2.SILOS_UNSPECIFIED mapping).
Both are using the same parameter file.
During Development DAC used to generate parameters for both sessions in the same file.Both now in diff environment,it is generating parameters for the first session
and for unspecified mapping it is not generating any parameters.So unspecified mappings are failing.
Any one help?

Please check whether the file parameterfileDW.txt has the section for that unspecified workflow. If not please copy and paste from DEV env and restart the load.
If it exists in parameterfileDW.txt and still not not generating section for unspecified session in parameter file then try running the below command at <infa_home>\server\bin
pmrep listobjectdependencies -n <WORKFLOW_NAME> -o workflow -f <FOLDER_NAME> -d session -p children
and see whether the output as your unspecified session and post your observations.
Mark If Helps

BDC session created as i excute I have not passed any file name

Hello Guru's
        I have created one BDC
PARAMETERS : readfile LIKE rlgrap-filename DEFAULT
             'c:\textfile.txt' LOWER CASE.
on execute I'm passing a new file name & my BDC works fine.
But in case i execute & do not pass any file name & cancel the same a BDC session is generated with zero values.
How to restrict the same. Please guide.

hi,
make ur field obligatory..
PARAMETERS : readfile LIKE rlgrap-filename DEFAULT
'c:\textfile.txt' LOWER CASE OBLIGATORY.
and make another check.
after uploading the file to internal table, check whether it contains any value...
   IF <tab>[] IS INITIAL.
      MESSAGE 'No Data in FILE.' type 'E'.
      LEAVE LIST-PROCESSING.
   ENDIF.
and if a blank session is generated, go to SM35 and delete that session...
Edited by: Sukriti Saha on Oct 23, 2008 10:39 AM
Edited by: Sukriti Saha on Oct 23, 2008 10:41 AM

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

Customized Seeded report to XMLP report but its not generating output file?

I want to customize "Dunning Letter Print from Dunning Letter Generate" Report, which is called from "Dunning Letter Generate" Report
Steps i followed to Customize reports are.
1. Changed output format to xml for "Dunning Letter Print from Dunning Letter Generate" Report.
2. Ran report to generate xml data and using xml data created RTF file
3. Registered data definition and template with code and short name same which is ARDLP_NON_SRS
Now while i am running report its completing normal, but its not generating output file giving Error like –
"Unable to find Published Output for this request"
“No Output File Exist for Request No - xxxxx”
No Idea why its not picking template, Can anyone help me in this?
Using:
Oracle Applications : 10.0.5.2,
MS Word 2007
Thanks,

I am not giving the solution, providing you a hint..
This is the query you need to satisfy,
SELECT NVL(R.DESCRIPTION ,CP.USER_CONCURRENT_PROGRAM_NAME)
FROM FND_CONCURRENT_REQUESTS R, FND_CONCURRENT_PROGRAMS_VL CP,XDO_DS_DEFINITIONS_B XDS
WHERE ( ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'U'
AND R.REQUESTED_BY = :$PROFILES$.USER_ID ) or
( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'R'
AND R.RESPONSIBILITY_ID = :$PROFILES$.RESP_ID ) )
AND R.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
AND R.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
AND XDS.APPLICATION_SHORT_NAME=
( SELECT APPLICATION_SHORT_NAME
FROM FND_APPLICATION
WHERE APPLICATION_ID=CP.APPLICATION_ID)
AND XDS.DATA_SOURCE_CODE = CP.CONCURRENT_PROGRAM_NAME
AND R.OUTPUT_FILE_TYPE='XML'
AND R.STATUS_CODE not in ('E', 'D', 'T', 'X')
ORDER BY R.REQUEST_ID DESC
Go to system profiles and query for 'Concurrent:Report Access Level', responsibility you need and modify the profile name accordingly....

MRP is not generating any schedule line in my vendor's scheduling agreement

Hello all,
My question is: why the MRP is not generating any new line in my vendor's scheduling agreement?
This is the scenario:
I have created a vendor's scheduling agreement with transaction ME31L
I have created a customer's scheduling agreement with transaction VA31 and those characteristics:
- Forecast scheduling lines
- JIT scheduling lines
- MRP to DS type assigned to type C: Requirements according to forecast delivery/Deliveries according to JIT
I have run MRP with transaction MD01
MRP is generating some purchasing requistions, not purchase orders because we have set up a release strategy which requires 2 approvals, but those purchasing requests are not generating any new line in the vendor's scheduling agreement.
Any idea why it could be? Please do not hesitate to ask for further explanations. Thank you

Hi,
Check if stock is available for the material in that plant.
Also check the requirement date for the material and compare it with the planning horizon for that plant.
Check your material master MRP view.
Create source list(for material and plant in question) with MRP indicator 2.
Thanks and Regards,
Maheshwari

Can not attach any files to one of my accounts

Hello
i seem to have problems with attachments. I have 5 e-mail accounts with mail. on 4 of them i can not put attachments. I have to first use the one account which i can add attachment and then change over to the other account
any idea

Ernie
thanks for the reply Here are the answers to your questions.
yes each account has it's own drafts folder. and I can save the file into the drafts folder after follow the steps you outlined in your answer. I did repair permission but nothing has changed .
one thing i discovered is that I can attach files to the mail if i reply to it. only when i create a new mail in one of those accounts can i not attach any files.
Seeing on the side bar that you are a top user I have another question you might be able to answer
my apple help is not working, when i go to finder and go to mac help the page is blank and if i search it just searches and nothing happens

CAN NOT OPEN ANY FILE

CAN NOT OPEN ANY FILE. USE W8 & ADOBE PHOTOSHOP CC 64B

Welcome to the forum.
Can you please provide us with more info, with which to work? This FAQ Entry will tell you what would be useful: http://forums.adobe.com/thread/1042147?tstart=0
Good luck,
Hunt

Can not open any files CS5 Win 7 64 bit

I can not open any files in Photoshop. I can open them in Bridge or LR. If I open a file in Camera Raw and try to go to Photoshop, PS opens and just sits there and looks at me as if I opened the program only.

Is this a new installation that has never worked, or is this a problem that has cropped up recently?
In any case, there are two things you can do that between them have a very good chance of getting things working for you.
1. As a diagnostic, click Edit - Preferences - Performance, and uncheck (disable) the [ ] Enable OpenGL Drawing setting, then close and reopen Photoshop. If this corrects the problem, then chances are good that your display driver needs to be updated. To do so, go to the web site of the maker of your video card (e.g., nVidia or ATI) and follow the links to the driver download that matches your hardware and operating system. When you've updated the driver and rebooted your system, re-enable the OpenGL Drawing setting (remembering to close and restart Photoshop) then re-test.
2. Clear all Photoshop preferences to standard defaults. To do this, press and hold the Control, Shift, and Alt keys IMMEDIATELY after cold-starting Photoshop from its shortcut or menu entry. If you're quick enough, it will prompt you. You'll need to go through all the preferences again to ensure any customizations you want are re-done.
Hope this helps!
-Noel

Can not open any files with Illustrator CC on windows 8.1

I can not open any files in Illustrator CC. It comes with an error message and shuts down. I run with the Danish version and windows 8.1. - help?!!

I just get this:
"Adobe Illustrator CC has stopped working - One problem was the fault of the program ceased to function properly. Windows close the program and notify you if a solution is found"
not useful..

Itunes on W8 will not play any files after upgrade to 11.0.4.4

After following the prompt and updating Itunes on Windows 8 to version 11.0.4.4 on 6 June, Itunes no longer plays any audio or video files from my library. Pick a file and Itunes shows that it is playing (Pause button only) however nothing happens. The file simply does not play. Windows Media Player will not open any files. VLC will play flash video files but with no sound. Video played in IE10 seems to play ok including sound. Anyone have any suggestions. I can uninstall but figure I'll get teh same version when I re-install. Everything worked fine prior to installing this upgrade.

Resolved by running W8 System Restore to a point prior to the last Itunes update. Now back on the previous version of Itunes. Windows Media Player working correctly with all file types. Itunes working correctly also. I'm quite happy not to re-apply any updates from Apple for a while.

BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>

BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards.

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

SMIGR_CREATE_DDL not generating any files

Similar Messages

Maybe you are looking for