Smooth-scrolling layouts

Hi everybody,
I tried to use a suggestion described by Colin Fleming in one of his video regarding "Smooth-scrolling layouts" but it seems I am not able to make it work (I get an error from Folio Builder).
Do anyone has been able to create a .folio with 768x2000px size with scrolling effect (just like described in the video of Colin seen on Adobe TV)?
Maybe after the update there has been a change and now what Colin showed is no valid anymore?
Thanks in advance for every reply!
Bye!

Hi Bob,
here you can see the error (the translation should be: "Content generation error. [The proportion of the page must match with the proportion of the folio.]").
Actually I have created a 768x1024 folio and I have imported as a single article the stack containing the Indesign files with 768x2000px dimensions... so I believe the error refers to this... but I have understood in the Colin's video that he succedeed in importing an Indesign file with different size.
Thank you Bob in any case for your help!
Bye!

Similar Messages

Smooth scrolling + alternate layout

Hi..
Im tryin to make a smooth scrolling article, for both horizontal and vertical use.
After creating the horizontal page, I try to do the vertical via 'Create Alternate Layout', and change the dimensions.
So far so good. The problem is, that the vertical page upscales the content – while the horizontal looks fine – when previewing the article..
If I do it the other way around (starting with the vertical page), the horizontal page downscales the content..
Doeas anyone know what could be the problem?
Thanks in advance!

And make sure the article is set to Smooth Scrolling in both directions.

I have not found any answers yet to solve this problem. Smooth Scroll Auditions CS5

I used to used Audition 3 and when recording or playing back the recorded wave form would be smooth and when it reaches the right hand edge of the screen it just smoothly continues. I have updated to Auditions CS5 and I cannot get it to do the same. It seem to jump back to leave more room instead on continually scrolling. In the preference option there is no option I can see to change this. The only option shows Playback but this seen to also just jump back to leave more room. Any idea where the setting it so make is smooth? Thanks in advance

Hello Ryclark.. The playback is the same as record. Unlike AD3, when the waveform gets to the right had side of the time line it JUMPS back to make room for the continuing recording where the recording is longer than the width of the screen. After an online chat with Adobe support ( who do not seem to know how their software works) , in the end they said that the new feature was for the Cursor and Waveform to Jump back to leave room for the continuation of the recording....unlike AD3 which smoothly scrolled the waveform. It is a step backwards and looks like a novice attempt... So if anyone wants to know if there is a solution to this backward step the Answer it NO. It is a new Jumpy flow layout. Seems like Adobe are getting like Microsoft,,,

Smooth Scrolling Pages - Memory Error (while uploading)

Landscape Magazine Article:
iPad version is 2048x6144 (4 pages tall, but smooth scrolling). This one uploads without problem.
iPhone 5 version is 1136x4000. Same layout as iPad, only font sizes are bumped up for readability. Content Generation Error: Out Of Memory
Happens every time. Isolated now to the smooth scrolling pages that get converted from ipad to iphone. The uploader fails on page 1 of the content generation stage. It's like there's a cache limit while it's building the folio article. What's strange is that this issue doesn't appear on a full-sized ipad version of the same layout. Workaround has been to split the layout into separate pages, which is a comprimise more than a workaround. Anybody experience this? Is there a way get these pages to upload?

Hi,
For a better troubleshooting, I suggest you can do as the followings:
1. You can create a new page library to test if it works.
2. I suggest you can check the ULS log for detailed error message, it will be easier to figure out the issue. By default, the ULS log of SharePoint 2013 is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can use ULS Viewer to see the detailed error message.
Here are some detailed articles for your reference:
https://sharepointlogviewer.codeplex.com/
https://ulsviewer.codeplex.com/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Smooth Scrolling Doubts

Hi, people
I'd like to understand better how works the feature Smooth Scrolling. Because when I create a big page, ie: 1024 px (width) x 3000 px (height). This page, now, is portrait in Folio Builder, instead of landscape (1024 x 768 px)
I have many problems to create big pages and in most of the case I recieve this mensage error, when I try update the article.
Content generation error.
[Error: The page size aspect ratio must match the folio aspect ratio.]
In my last tried I managed upload one layout (1024 x 3000 px) like Portrait - worked well. But when I tried upload the Landscape (big page too) - 3000 x 768 px I didn't get.
I know that is possible have just one page (each orientations) per article, that's right?
Thanks a lot for some help

Thanks, Levine
But, even change the name to _h dosen't works. Just Vertical
Please, read the mensage from Bob - Adobe about alike issue
Bob Bringhurst
Smooth Scrolling is vertical only. You can’t use Smooth Scrolling to scroll a page horizontally. You may want to use a large scrollable frame, but leave a little room to let the user swipe to the next article.
Last Week
Reply | Quote | Direct Link
Will be that Smooth Scrolling is vertical only?? If there are three diferent options in articles subnemu in Folio Builder Panel.
I'm a little confused
Thanks a lot
Felipe

Smooth Scrolling made clear and easy

A new folio appeared in Bob Bringhurst's jewel app "DPS Tips", discussing all kinds of special content and interaction. In the Smooth Scrolling section it states that you cannot create Smooth Scrolling articles simply by "Adding" an article. This should be achieved by "Importing" Articles. And it specifically states that you can't create horizontally scrolling articles. This baffles me ! I know it can be a bit tricky, but when explained and understood carefully, there's no problem in using the "Add" button or even to create a horizontally scrolling article on the fly.
The tricky part is, how the InDesign file (an article's half) is 'born'. To be able to use the "Add" button to create a properly scrolling article, you must check that the Document Setup upon making a new file (or even later on) is set to the proper single-page size (in a 3:4 dimension) and with the desired orientation (landscape or portrait), before you hit the "Add" button. Because this is where the Folio Builder gets its information from about the dimension and orientation. Afterwards, you set the page's length with the Page Selection tool – but take care: ONLY the length ! DO NOT use the width or orientation properties with this tool, nor use the Height setting in the Document Setup, although these seem very obvious for this task. You can even correct a page afterwards, and get the "adding" right (and lengthen it properly) if it has been malformed and unaccepted by the Folio Builder before.
So, to conclude: start a scrolling page with a single page, normal size (1024x768), landscape or portrait, add it to the Folio, and then lengthen the page with the Page tool's Height setting. Don't forget to set the Smooth Scrolling option accordingly among the Article's properties in the Folio Builder panel. No big deal !

That's indeed the culprit: when you have already set the elongated landscape page upon New Document. But it's still easy to correct that afterwards: switch it back to 768 in Document Settings (the cropped content becomes invisible but remains in place), aAdd the layout (it will become the landscape version), and stretch the page to the desired length with the Page tool's Height property.
Both methods can be difficult, depending on the way you prefer to work. Visual designers who already find it hard to keep track of a Package folder will shiver upon seeing the rigid hierarchy of a Folio folder; technical users won't mind preparing a folder stucture like that. Using ADPS requires many more unlogical steps than just this, like updating a design (not at folio or layout level, but only the whole Article) or discovering that one missing or extraneous orientation prevents the folio to be previewed.
So either way it is fishy...
But I'm glad that this aspect will be tackled by an update, soon !

Horizontal smooth scrolling

Is it possible to have longer pages (768x1500) and set it to horizontal smooth scroll. I wonder if you could upload several long articles and combine them into one article and set it to horizontal smooth scroll?

I think the Smooth Scrolling feature is designed for webpage-style vertical scrolling only. The 'Horizontal' and 'Vertical' direction settings refer to the layout orientations (your landscape and portrait layouts), not the direction of the scroll action itself.
If I understand this incorrectly, please someone jump in to correct me.
You could get around this by having horizontal Scrollable Content that fills the height of your layout but extends left-and-right. The problem is that, having reached the right-hand end of the Scrollable Content, swiping across the iPad screen will not move you on to the next page or next article. Perhaps you could get around this by adding a secret button (a 'navto' link to the next page) that overlays a button graphic that only comes into view at the end of the Scrollable Content. Not sure if this would work, though.
Ali

New Smooth Scrolling issue

I have been able to create and upload several oversized pages with no problem...until today. Today, I have been trying to add
two new articles and the Folio Builder will only load one orientation, not both. I'll start with my _v file, which will upload correctly. Then I'll try to add the _h layout and it just overwrites/updates the _v layout. They were created the same way as the ones that I already have loaded, 768w x 2000h & 1024w x 2000h. They are single page files and each orientation loads correctly. This is becoming a deadline crucial concern. Has anything been updated recently that could have caused this? Am I missing something?
In a slightly related note, the Content Viewer doesn't seem to want to view oversized, smooth scrolling pages in their entirety.

This is a known issue. Use the Import option to import the article. Let me know if you need more details.

How can I get back the two button smooth scroll with Logitec optical marble mouse since Adobe Acrobat or FireFox updates on 10/26/2010 made it quit?

Oct 25, 26 or 27 both Adobe Acrobat and Mozilla Firefox alerted me they had updates to install. Since I trust them both I installed them. However, since then my optical marble mouse from Logitech acted strangely different. The cursor did not move as usual. It didn't respond right. I thought it might have needed the dust wiped out, so I did that. It still acted sluggish when I tried to move it, it was as though it was "spinning its wheels" not going anywhere. I went to the Control Panel clicked on Mouse, and proceeded to look at the settings and set them to default. I then tried to use the universal scroll by clicking the two big buttons which showed a circle with cross hair arrows as usual. When the marble was moved forward or backward, the scroll had always been smooth allowing one to read the screen evenly and without holding any button down. Now it was jerky. Is this a problem from the last update? My version of Firefox is 3.6.12
Thank you

I am happy to see another person is having this jerky scroll situation with the latest update to Firefox on October 27. I did check my I.E browser and '''THAT BROWSER''' still does the nice smooth scroll....let's get 'er fixed Mozilla! I know you can!

How can I make the Smooth Scrolling option in the Advanced menu apply ONLY to the tab bar?

So, I'm one of those people who usually have 60+ tabs open at any given time. I'm also on a Lenovo laptop with a trackpoint (that may be relevant later).
Right now, I have smooth scrolling disabled.
In previous versions of Firefox, if I sat my cursor on the tab bar and scrolled either up or down, it would scroll across my tab bar at a constant, quick rate, usually taking about two or three seconds to reach the end. This wasn't an animated scroll (I've disabled that animated scroll via about:config in the current Firefox version).
However, now, it's doing something different. There's acceleration to the scroll. If I just tap the scroll in either direction, it scrolls only a few tabs. However, if I hold the scroll for a second, it instantaneously takes me to the far end of the tab bar, completely skipping at least thirty tabs in between.
I have tab scroll buttons added by Tab Mix Plus (smooth scrolling is also not enabled in that addon), and the same accelerating behavior occurs there. One or two taps of the button moves the bar a few tabs to the left or right, but several taps in quick succession takes me all the way to the far end of the bar.
I can restore the old scrolling behavior for the tab bar by turning on smooth scrolling in the Options > Advanced menu, but that turns on smooth scrolling for web pages at the same time. I don't like the web page smooth scrolling, and would rather not have it on.
Or if there's any other way to make it so that scrolling the tab bar moves the tab bar a fixed amount no matter what, that would be great.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Datagrid smooth scrolling...

Hi Alex/ All,
       That was great job. You have implemented smooth scrolling for List.. Based upon that I have implemented the same in datagrid also..But I am facing couple of issues...
    1. I have Item renderer Text.. With in that text I am displaying almost 90 records and it has a huge height. Accordingly the row height must change .. But what happend in my case is the data is overlapped on the second row.. the row height changes to certain height. after that it is not expanding.. records are displaying and overlapped on the second row and if it still lengthy it displayed on the third row also... so How can I solve this issue.. The row height must vary with the itemrenderer..
2. Second one is If I scroll vertically it is scrolling smoothly fine. But If I release the mouse the scroller going to Row end position or row starting position..
        I just want to fix the scroller position where user releases the Mouse from the vertical scrollbar...
      Can you please help me on this .. It is urgent ..... I am posting my Datagrid code here...
package view.components.grid
    import flash.display.DisplayObject;
    import flash.events.Event;
    import mx.controls.Alert;
    import mx.controls.DataGrid;
    import mx.events.ScrollEvent;
    import mx.events.ScrollEventDetail;
    public class CustomGrid extends DataGrid
        private var fudge:Number;
        public function CustomGrid()
            super();
            offscreenExtraRowsOrColumns = 2;
        override protected function configureScrollBars():void
            super.configureScrollBars();
            if (verticalScrollBar)
                verticalScrollBar.lineScrollSize = .125; // should be inverse power of 2
        override public function get verticalScrollPosition():Number
            //Alert.show("You are in vertical scroll Position handler");
            if(!isNaN(fudge))
                var vsp:Number = super.verticalScrollPosition + fudge;
                fudge = NaN;
                return vsp;
            return Math.floor(super.verticalScrollPosition);
        override protected function scrollHandler(event:Event):void
            // going backward is trickier. When you cross from, for instance 2.1 to 1.9, you need to convince
            // the superclass that it is going from 2 to 1 so the delta is -1 and not -.2.
            // we do this by adding a fudge factor to the first return from verticalScrollPosition
            // which is used by the superclass logic.
            var last:Number = super.verticalScrollPosition;
            var vsp:Number = verticalScrollBar.scrollPosition;
            if (vsp < last)
                if (last != Math.floor(last) || vsp != Math.floor(vsp))
                    if (Math.floor(vsp) < Math.floor(last))
                        fudge = Math.floor(last) - Math.floor(verticalScrollBar.scrollPosition);
                        trace(last.toFixed(2), vsp.toFixed(2), fudge);
            super.scrollHandler(event);
            var pos:Number = super.verticalScrollPosition;
            // if we get a THUMB_TRACK, then we need to calculate the position
            // because it gets rounded to an int by the ScrollThumb code, and
            // we want fractional values.
            if (event is ScrollEvent)
                var se:ScrollEvent = ScrollEvent(event);
                if (se.detail == ScrollEventDetail.THUMB_TRACK)
                    if (verticalScrollBar.numChildren == 4)
                        var downArrow:DisplayObject = verticalScrollBar.getChildAt(3);
                        var thumb:DisplayObject = verticalScrollBar.getChildAt(2);
                         pos = (thumb.y - downArrow.height) / (downArrow.y - thumb.height - downArrow.height) * maxVerticalScrollPosition;
                        // round to nearest lineScrollSize;
                        pos /= verticalScrollBar.lineScrollSize;
                        pos = Math.round(pos);
                        pos *= verticalScrollBar.lineScrollSize;
                        //trace("faked", pos);
            var fraction:Number = pos - verticalScrollPosition;
            fraction *= rowHeight;
            //trace("was", listContent.y.toFixed(2));
            listContent.move(listContent.x, viewMetrics.top + listContent.topOffset - fraction);
            //trace("now", listContent.y.toFixed(2), fraction.toFixed(2), listItems[0][0].data.lastName);
Thanks
Ram

Renderers must report a correct measuredHeight based on a given
explicitWidth. You may need to override measure() method.
If the rows are so tall they don't fully fit in the DG, there may not be a
simple solution for MX DataGrid The Spark DataGrid should be able to handle
it

Smooth scrolling on a horizontal page - how did Benjamin Moore do it?

Hi,
I'm trying to work out how Benjamin Moore did this (in their COLOURSTORIES Canadian Version). We're looking to do something similar (Different content on the horizontal and vertical formats), but can't work out how Benjamin Moore managed to get a scrolling horizontal page.
The screen shot is below:
We're looking, if possible, to have the horizontal and vertical versions of each article smooth scrolling.
Is this possible?
Also, is there a static URL for the features & bug fixes for the most recent release? I'm finding that even searching the forum thows up "This is fixed in the new release" without any reference to what the release is (v21, v22 etc). T'would be a help!
Cheers,
Simon.

Thanks Bob - my problem was not realising the "Scrolling direction" relates to the orientation of the orientation of the articles, and not as the name suggests the scrolling direction. Another fact stored in the noggin for future use

How to make smooth scroll in muse

I want the smooth scroll effect in my site just like this http://nexgeninnovators.com

You can try to use anchors on page and link them to fixed positions on page, that would create similar effect.
But if you are looking for setting up jump scrolling on page then at current stage we cannot setup this with scroll effects.
Thanks,
Sanjit

How can I turn off smooth scrolling in Lion?

I can't not turn off smooth scrolling.
Actually, I don't want to use smooth scrolling in Lion OS.
How can I turn off smooth scrolling in Lion?
In case of Leopard, there is option on "System Preferences, Appearance".
Please help me.

Apple > System Preferences > General > Use smooth scrolling: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2472.html

Preview on iPad through Folio Overlays window of smooth scrolling article.

Preview on iPad through Folio Overlays window of smooth scrolling article (ex. 1024 x 2000 px) is not working anymore. Article is scaled and turned in vertical orientation. No problem with Folio Builder.

Thanks for reporting this, I'll pass it on to our test team for investigation and they'll log a bug against a future release if we can reproduce it.
Neil

Smooth-scrolling layouts

Similar Messages

Maybe you are looking for