Smooth Scrolling not available

I tried to enable Smooth Scrolling in Adobe Reader by using Preferences -> Page Display, but the option is not even available for me to select.
According to the Reader help pages, the last option on the page (below) should be "use smooth scrolling". Any idea why it's not available? I am running Adobe Reader on a MacBook running Tiger.
Thank you,
Neil

Similar Messages

Mac Book Pro (late 2007): Photoshop CS4 - Smooth scrolling not supported

Hi, I installed Photoshop CS4 on my macbook pro (late 2007). Unfortunatly the smooth zooming and scrolling feature isn't supported because "this feature only works with images that support Open GL"(error message translated from german).
I searched the web and encountered the issue with the Geforce 8600M GT series that might be corrupted. I contacted my local dealer, he found a problem, the motherboard and graphics card was replaced, but unfortunatly the problem still remains.
I guessed that my macbook pro is simply too old. But a few days later I saw a friend working with the smooth scrolling on his macbook pro from early 2007.
Does anybody have an suggestion to this problem?
The ROM Version of my GeForce 8600M GT is 3175

Hi, coolking. You've posted in a forum devoted to the recent "unibody" MBPs, which have different GPUs from yours. You're more likely to find users who are familiar with your machine and can address your problem if you repost in this forum:
http://discussions.apple.com/forum.jspa?forumID=1293

I have not found any answers yet to solve this problem. Smooth Scroll Auditions CS5

I used to used Audition 3 and when recording or playing back the recorded wave form would be smooth and when it reaches the right hand edge of the screen it just smoothly continues. I have updated to Auditions CS5 and I cannot get it to do the same. It seem to jump back to leave more room instead on continually scrolling. In the preference option there is no option I can see to change this. The only option shows Playback but this seen to also just jump back to leave more room. Any idea where the setting it so make is smooth? Thanks in advance

Hello Ryclark.. The playback is the same as record. Unlike AD3, when the waveform gets to the right had side of the time line it JUMPS back to make room for the continuing recording where the recording is longer than the width of the screen. After an online chat with Adobe support ( who do not seem to know how their software works) , in the end they said that the new feature was for the Cursor and Waveform to Jump back to leave room for the continuation of the recording....unlike AD3 which smoothly scrolled the waveform. It is a step backwards and looks like a novice attempt... So if anyone wants to know if there is a solution to this backward step the Answer it NO. It is a new Jumpy flow layout. Seems like Adobe are getting like Microsoft,,,

[svn:osmf:] 17499: Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available

Revision: 17499
Revision: 17499
Author:   [email protected]
Date:     2010-08-27 11:05:22 -0700 (Fri, 27 Aug 2010)
Log Message:
Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-990
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as

Revision: 17499
Revision: 17499
Author:   [email protected]
Date:     2010-08-27 11:05:22 -0700 (Fri, 27 Aug 2010)
Log Message:
Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-990
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as

Audition CS5.5 is not working well with Microsoft Mouse "smooth scrolling" feature

Hi,
I'm testing with the Audition CS5.5 and found that the mouse scrolling (I use it mainly for zoom, zooming in and out to see the waveform) is just not working well and sluggish, and finally I figured out it somewhat related to the "smooth scrolling" of Microsoft Mouse. Anyone with the same problem? In fact the scrolling is working very well for Audition 3.0.1, I don't know why it fail for CS5.5.
Best regards,
Steve

The trial version is the same as the full version except
for the 30 day limitation.
I think on windows xp you need sp3 for cs5 to work as expected.
Anyway that's what is says here:
http://www.adobe.com/products/photoshop/photoshopextended/systemreqs/
That may not be the problem, but it's a good place to start.
Also it's not a good idea to post your email on the forums.
MTSTUNER

Smooth scrolling page - slideshows not working. Please help!

Hi, I've created a smooth scrolling page with 3 slideshows positioned as you moove down the page. They appear to be working when previewed but not once uploaded. Does anyone know why?
Thanks

Hi Bob, hi Ross,
I've monitored the same problem. When a slide/MSO in a smooth scrolling article goes over the fold, it'll not play automaticly neither manual by tap.
It has nothing to do with selected running single or multiple times. Seems like the same problem with MSO's go in document bleed.
Seen on DPS v28 on iOS, but also on earlier versions.
Kind regards,
Tobias

I am trying to import my cd's onto itunes on a new macbook pro. i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"

i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"
thank you

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Smooth Scrolling Issue in Firefox 18

Smooth Scrolling is lagging in firefox 18 it's not smooth anymore
what can i do
or should i stop using Firefox for just smooth scrolling
Help please.............................................................

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

Firefox smooth scrolling is sloppy

So I updated to the latest version, which is 33 iirc. A few days since, I've been getting the reoccurring issue of smooth scrolling being sloppy. It doesn't lag at all, but it is noticeably not as smooth. Only way to revert back is to click on my mouse wheel to scroll up or down with, or open a new tab. But it's only temporary and soon goes back to being sloppy.
I've had issues like this in the past with previous versions of FF. Also, whenever I put my PC in sleep mode, wake it up and start up FF, it'll perform the same way as well.
It didn't used to do that before, so I'm confused as to why it's doing this. I very rarely install extensions or add-ons.
It's kind of hard to explain since I can't obviously show anyone exactly what it's doing, but it's still kind of annoying.
Thanks for the help!

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* Click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Smooth scrolling make me sick!

HI!!!
I recently upgrade to Mavericks form a SL.
I really NEED to disable this smooth scrolling, it make me really sick after a few minutes!!
Please!!! How to disable this?
Thanks!

Something is broken in Blackberry Device filesystem that causes the problem.
Device in that condition is available for Blackberry Desktop Software for a very short period of time - when it starts.
Use JL_Cmder utility to wipe your device memory when the device is available for this short period of time.
It is not easy to catch the moment - but let's try.
After wipe - download the RIM OS here
and install it on your PC. After that - connect device to PC, run Blackberry Desktop Software to install OS to device.
If that does not help - bring your device to repair shop to wipe the device memory.
There is nothing broken on device hardware, it is a severe software failure.
Unfortunately RIM does not provide a hardware button to reset the device to factory settings.
Try this utility.
Hope this helps.

How can I get back the two button smooth scroll with Logitec optical marble mouse since Adobe Acrobat or FireFox updates on 10/26/2010 made it quit?

Oct 25, 26 or 27 both Adobe Acrobat and Mozilla Firefox alerted me they had updates to install. Since I trust them both I installed them. However, since then my optical marble mouse from Logitech acted strangely different. The cursor did not move as usual. It didn't respond right. I thought it might have needed the dust wiped out, so I did that. It still acted sluggish when I tried to move it, it was as though it was "spinning its wheels" not going anywhere. I went to the Control Panel clicked on Mouse, and proceeded to look at the settings and set them to default. I then tried to use the universal scroll by clicking the two big buttons which showed a circle with cross hair arrows as usual. When the marble was moved forward or backward, the scroll had always been smooth allowing one to read the screen evenly and without holding any button down. Now it was jerky. Is this a problem from the last update? My version of Firefox is 3.6.12
Thank you

I am happy to see another person is having this jerky scroll situation with the latest update to Firefox on October 27. I did check my I.E browser and '''THAT BROWSER''' still does the nice smooth scroll....let's get 'er fixed Mozilla! I know you can!

How can I make the Smooth Scrolling option in the Advanced menu apply ONLY to the tab bar?

So, I'm one of those people who usually have 60+ tabs open at any given time. I'm also on a Lenovo laptop with a trackpoint (that may be relevant later).
Right now, I have smooth scrolling disabled.
In previous versions of Firefox, if I sat my cursor on the tab bar and scrolled either up or down, it would scroll across my tab bar at a constant, quick rate, usually taking about two or three seconds to reach the end. This wasn't an animated scroll (I've disabled that animated scroll via about:config in the current Firefox version).
However, now, it's doing something different. There's acceleration to the scroll. If I just tap the scroll in either direction, it scrolls only a few tabs. However, if I hold the scroll for a second, it instantaneously takes me to the far end of the tab bar, completely skipping at least thirty tabs in between.
I have tab scroll buttons added by Tab Mix Plus (smooth scrolling is also not enabled in that addon), and the same accelerating behavior occurs there. One or two taps of the button moves the bar a few tabs to the left or right, but several taps in quick succession takes me all the way to the far end of the bar.
I can restore the old scrolling behavior for the tab bar by turning on smooth scrolling in the Options > Advanced menu, but that turns on smooth scrolling for web pages at the same time. I don't like the web page smooth scrolling, and would rather not have it on.
Or if there's any other way to make it so that scrolling the tab bar moves the tab bar a fixed amount no matter what, that would be great.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Datagrid smooth scrolling...

Hi Alex/ All,
       That was great job. You have implemented smooth scrolling for List.. Based upon that I have implemented the same in datagrid also..But I am facing couple of issues...
    1. I have Item renderer Text.. With in that text I am displaying almost 90 records and it has a huge height. Accordingly the row height must change .. But what happend in my case is the data is overlapped on the second row.. the row height changes to certain height. after that it is not expanding.. records are displaying and overlapped on the second row and if it still lengthy it displayed on the third row also... so How can I solve this issue.. The row height must vary with the itemrenderer..
2. Second one is If I scroll vertically it is scrolling smoothly fine. But If I release the mouse the scroller going to Row end position or row starting position..
        I just want to fix the scroller position where user releases the Mouse from the vertical scrollbar...
      Can you please help me on this .. It is urgent ..... I am posting my Datagrid code here...
package view.components.grid
    import flash.display.DisplayObject;
    import flash.events.Event;
    import mx.controls.Alert;
    import mx.controls.DataGrid;
    import mx.events.ScrollEvent;
    import mx.events.ScrollEventDetail;
    public class CustomGrid extends DataGrid
        private var fudge:Number;
        public function CustomGrid()
            super();
            offscreenExtraRowsOrColumns = 2;
        override protected function configureScrollBars():void
            super.configureScrollBars();
            if (verticalScrollBar)
                verticalScrollBar.lineScrollSize = .125; // should be inverse power of 2
        override public function get verticalScrollPosition():Number
            //Alert.show("You are in vertical scroll Position handler");
            if(!isNaN(fudge))
                var vsp:Number = super.verticalScrollPosition + fudge;
                fudge = NaN;
                return vsp;
            return Math.floor(super.verticalScrollPosition);
        override protected function scrollHandler(event:Event):void
            // going backward is trickier. When you cross from, for instance 2.1 to 1.9, you need to convince
            // the superclass that it is going from 2 to 1 so the delta is -1 and not -.2.
            // we do this by adding a fudge factor to the first return from verticalScrollPosition
            // which is used by the superclass logic.
            var last:Number = super.verticalScrollPosition;
            var vsp:Number = verticalScrollBar.scrollPosition;
            if (vsp < last)
                if (last != Math.floor(last) || vsp != Math.floor(vsp))
                    if (Math.floor(vsp) < Math.floor(last))
                        fudge = Math.floor(last) - Math.floor(verticalScrollBar.scrollPosition);
                        trace(last.toFixed(2), vsp.toFixed(2), fudge);
            super.scrollHandler(event);
            var pos:Number = super.verticalScrollPosition;
            // if we get a THUMB_TRACK, then we need to calculate the position
            // because it gets rounded to an int by the ScrollThumb code, and
            // we want fractional values.
            if (event is ScrollEvent)
                var se:ScrollEvent = ScrollEvent(event);
                if (se.detail == ScrollEventDetail.THUMB_TRACK)
                    if (verticalScrollBar.numChildren == 4)
                        var downArrow:DisplayObject = verticalScrollBar.getChildAt(3);
                        var thumb:DisplayObject = verticalScrollBar.getChildAt(2);
                         pos = (thumb.y - downArrow.height) / (downArrow.y - thumb.height - downArrow.height) * maxVerticalScrollPosition;
                        // round to nearest lineScrollSize;
                        pos /= verticalScrollBar.lineScrollSize;
                        pos = Math.round(pos);
                        pos *= verticalScrollBar.lineScrollSize;
                        //trace("faked", pos);
            var fraction:Number = pos - verticalScrollPosition;
            fraction *= rowHeight;
            //trace("was", listContent.y.toFixed(2));
            listContent.move(listContent.x, viewMetrics.top + listContent.topOffset - fraction);
            //trace("now", listContent.y.toFixed(2), fraction.toFixed(2), listItems[0][0].data.lastName);
Thanks
Ram

Renderers must report a correct measuredHeight based on a given
explicitWidth. You may need to override measure() method.
If the rows are so tall they don't fully fit in the DG, there may not be a
simple solution for MX DataGrid The Spark DataGrid should be able to handle
it

Smooth scrolling on a horizontal page - how did Benjamin Moore do it?

Hi,
I'm trying to work out how Benjamin Moore did this (in their COLOURSTORIES Canadian Version). We're looking to do something similar (Different content on the horizontal and vertical formats), but can't work out how Benjamin Moore managed to get a scrolling horizontal page.
The screen shot is below:
We're looking, if possible, to have the horizontal and vertical versions of each article smooth scrolling.
Is this possible?
Also, is there a static URL for the features & bug fixes for the most recent release? I'm finding that even searching the forum thows up "This is fixed in the new release" without any reference to what the release is (v21, v22 etc). T'would be a help!
Cheers,
Simon.

Thanks Bob - my problem was not realising the "Scrolling direction" relates to the orientation of the orientation of the articles, and not as the name suggests the scrolling direction. Another fact stored in the noggin for future use

How can I turn off smooth scrolling in Lion?

I can't not turn off smooth scrolling.
Actually, I don't want to use smooth scrolling in Lion OS.
How can I turn off smooth scrolling in Lion?
In case of Leopard, there is option on "System Preferences, Appearance".
Please help me.

Apple > System Preferences > General > Use smooth scrolling: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2472.html

Smooth Scrolling not available

Similar Messages

Maybe you are looking for