Smooth transition from (warp) Stabilized clip to the other clips on the timeline

When I link my (warped) clip to the other clips (that are running fine, and are not stabilized), right in the transition (both at the beginning and at the end), the clip "jumps", which I guess is sort of logic.
How do I connect the warped clip to the other clips on the timeline smoothly? I tried to nest both clips so they start out "fresh", but it still doesn't look right. Tried all alternatives in the Warp section.
Thanks

But you said "transition" - first word, second line?
If you stabilise and export a clip with handles, you can then apply transitions without problem, to the new clip.
Applying the stabiliser to the entire 2 minute clip, if that is what you mean, would not work.  There would be too much motion overall for the stabiliser to achieve an acceptable result.
The best results are always achieved with short sections of clip, so the total motion over the timescale of the clip is limited.

Similar Messages

  • When I have two audio clips next to eachother, how do i 'dissolve' them so its a smooth transition from one to the next?

    I have a few clips besides eachother.. levels are up and down, but i want to do an 'audio dissolve' per se, or fade from one audio clip into the other.. to make it smooth..  how do i do this? thanks

    One might think that you could simply drop a transition effect on to two connected audio clips to fade from one to the next. In fact, that's what the menu seems to imply:
    But you can not. No transition effects can be attached to Connected Clips. The menu lies!
    There are however several ways to do accomplish the transition.
    You can overlap them and drag the fade gadgets like this:
    Another way is to transform the audio clips to a secondary Storyline (command-g). This will allow you to use transitions.

  • Reanalyzing Warp Stabilized Clips

    Premiere2014 CC was working relatively well. Slow as heck but still usable.  It has now become almost unusable.  Every time I exit the project is saved plus auto save does it every 30 min. However when I open the program the warp stabilization shows red in the timeline and the New Frames Need Analyzing come up. There are about 13 clips this happens to every stinking time.  There are also about 10 or so other clips that don't have the warp stabilization and they are fine.
    When I hit the analyze button, the computer cpu now hits 100% and the Physical Memory shows 90 to 95%.  Analyzing is slower than molasses. Not fun.  Once all the clips are analyzed one by one, the memory usage is pegged at about 6.5 gigs and cpu is pegged as I said above. Playback is impossible.  This was not happening all yesterday when I first installed it.  Hoping to render the clips in the timeline, I save the project (twice) and exit premiere.  It shuts down quickly but still keeps mem and cpu pegged for another 3 or 4 minutes and then suddenly all the mem and cpu come back to usuable.  I have 8 GB mem installed as two 4GB sticks.  Computer was bought last year and is fast with a geoforce graphics card.  When I open the project the next time, all the analyze settings are gone and it wants to re-analyze the frames again on the 13 clips.
    There is no possible way that I can render my preview files after analyzing since the system is pegged.  I've tried.  It's only 4 min of 1080p/30fps but would have taken days.  Everything was rendering slow but fine yesterday.  Now it is frustrating and unusable.
    I have an internal 400GB drive with the program. and a 1T external USB drive for the vid files. It was not like this yesterday and everything was functioning.
    Any help is appreciated.
    -- Dax
    [Please choose only a short description for the thread title.]

    Thanks for the response. The warp settings not saving has been a frustrating issue for sure. What's weird is that I have prior sessions within the same vid where the clip warp settings WERE saved and give no problems.  Adobe shows 4gigs as the min for Premiere.  My 8gigs were working slowly but were pegging the mem and CPUs. Earlier they were not pegging, and after I posted I had some good sessions that were slow but tolerable.  Then it went back to being gummed up.
    Sooo I went out and bought 16 gigs and moved the project to a new Passport 2T usb3 drive.  Things are still slow but quicker than before for sure.  I haven't noticed if it is saving the warp settings after the new mem.  I had finished all the clips when it was working for a bit before the 16gig purchase.
    Otherwise, Premiere 2014 CC seems to be cranking along and sucking most of the new 16 gigs.  But again, it seems a bit happier with 16! 
    Thanks for the answers!

  • How to link from a movie clip to main timeline?

    My problem first appeared very simple, but I have spent a
    while on it and can't think how to solve it. I must say that I am
    very much an amateur in designing in Flash and ActionScript.
    I created a movie clip containing an embedded video and a
    sound clip. In the main timeline I inserted the movie clip into a
    keyframe. When I found the movie clip didn't play, I discovered
    that the only way of making it play was to place a Stop action in
    the keyframe of the movie clip, and also set the whole movie to
    loop. The Stop action stopped the whole movie from looping, but
    instead made the movie clip loop. If the keyframe is on frame 456,
    how do I make it advance onto frame 457 once the movie clip has
    finished running?
    I've tried various ways around the problem, including placing
    a button inside the movie clip to Go to and Play frame 457, but
    instead it plays frame 457 in the movie clip.
    Can anyone help me with this please?

    Hello,
    You need to tell flash the "target" you want to play. If not
    specified
    it will think it is the target you are calling from which in
    your case
    is the movie clip.
    So to go back and play one level up would be:
    _parent.gotoAndPlay(457);
    If the movie clip was inside another movie clip then it would
    be:
    _parent._parent.gotoAndPlay(457);
    or you can just referent the root of the movie directly:
    _root.gotoAndPlay(457);
    Search the help file for timeline target and you should find
    more about it.
    Incubusguy wrote:
    > My problem first appeared very simple, but I have spent
    a while on it and can't
    > think how to solve it. I must say that I am very much an
    amateur in designing
    > in Flash and ActionScript.
    >
    > I created a movie clip containing an embedded video and
    a sound clip. In the
    > main timeline I inserted the movie clip into a keyframe.
    When I found the movie
    > clip didn't play, I discovered that the only way of
    making it play was to place
    > a Stop action in the keyframe of the movie clip, and
    also set the whole movie
    > to loop. The Stop action stopped the whole movie from
    looping, but instead made
    > the movie clip loop. If the keyframe is on frame 456,
    how do I make it advance
    > onto frame 457 once the movie clip has finished running?
    >
    > I've tried various ways around the problem, including
    placing a button inside
    > the movie clip to Go to and Play frame 457, but instead
    it plays frame 457 in
    > the movie clip.
    >
    > Can anyone help me with this please?
    >
    >

  • Export from FCE is different then the timeline

    hi there, when I try to export from FCE the output file is different from the video in my timeline.
    It concerns a screengrab recorded with QT10. That QT file is converted to a Apple intermediate codec - as I normally do with QT files.
    I edit it & then export it to a h.264 QT HD file. There's clearly a difference between the final QT and the video in the timeline.
    Shots mysteriously appear where they can't be seen in the timeline, cuts are not exact where I've put them.
    I've tried a different output codec, re-did my AIC encoding but nothing helps..
    Can't find any logical reason why this happens. It's the first time I've had this happen.
    Thx for feedback
    WS

    I've tried several things but the problem remains.
    I made a new AIC file @15fps and exported again to h.264 @ 15fps but I still see shots that are not in the timeline.
    I have the impression that the exported files add about 10 frames ahead of the cut that I make in the timeline...
    Any helpfull insights are welcome
    Thx

  • How to create a smooth transition from end of a movie clip to beginning of a movie clip?

    I have a motion tween that is 180 frames in length. When the tween ends on the last frame and returns to the first frame to replay there is a slight jump in the tween. Is there anyway to stop the tween from jumping from last frame to the first?

    The answer lies in the first posting you made for this topic.  You shouldn't start a new discussion for the same topic.

  • Thank you for the smooth transition from Setanta to Fox Soccer Plus!

    When can we see FSC and FS+ in HD? Is there a way to move FS+ from it's 1009 channel where whenever i browse the guide i am afraid my kids will start seeing the titles on the movies from channel 1005 (Hot Choice PPV)?
    Solved!
    Go to Solution.

    You can block adult titles/descriptions from appearing in the guide in the parental controls.

  • Smooth transition from Mountain Lion Server to Mavericks Server 3.0!!

    After an new OS release that are always complaints about installation and configuration problems. First comers to using any new software tool provide valuable feedback we generally hope will help improve the new product. It's how things have worked since the first 6503 Apple II's and 8086 IBM PC's.
    I've been using and upgrading PC's since THOSE DINOSAURS! And I can't remember EVER having an OS upgrade go as smoothly as my recent upgrade from Mountain Lion Server (OS X 10.8.5 w. Server 2.2.2) to Mavericks Server 3.0.
    I chose to do a clean Mavericks install on a clean partition created on a 1 TB disk that was upgraded into my trusty MacBook. I used the DiskmakerX app to create a Mavericks installation USB drive. When the screen came up with the option to import users, programs & files (took a pass on email) from the Mountain Lion Server partition, I let it run overnight to transpose everything of value into the clean Mavericks installation.
    The next morning the only program that wasn't PERFECTLY installed and configured on Mavericks was Server 2.2.2. I deleted it and bought/installed Server 3.0. After Server 3.0's setup ran that only thing I had to do manually was start Postgres! My domain setting, DNS, all my web applications that were set up on Mountain Lion Server were all GOOD TO GO again on Mavericks Server!
    I'm disclosing this here, publicly because it was a BIG PAIN to install and deploy all my websites using Mountain Lion's server app. To say the easy transposition into Server 3.0 was an unexpected and pleasant surprise amounts to massive understatement.
    Now I'm going to describe two small anomolies I've noticed in either Mavericks or Server 3.0 that other users might want to be on the lookout for. They're not fatal. But they might be "habringers" suggesting underlying problems in either the new OS or the new Server's internals.
    The toolbar icon for TimeMachine doesn't "spin" when it backs up. It's not a big deal. But it's convenient to see the circle around the clock whirling so we know when TIme Machine is backing up.
    Mavericks Server isn't reporting newly upgraded apps as available under the Updates Tab of the Server's Software Updates subsystem. It might be inconsequential. But with a new OS version it never hurts to let the developers know about the "little things" that don't apparently work.
    Kudos to the Maverick's developers for releasing an OS X version that's THIS CLEAN. And hugs to Apple's management for making it a free download upgrade for developers!!!
    Full disclosue: I don't now and never have worked for Apple. but I do own a few shares of Apple stock that we purchased many years ago at $14.00 / share. I'm not a big shareholder. But based on my recent seamless upgrades to Mavericks and iIOS 7, I'm a happy one who's not likely to sell any time soon.
    If Apple can do for ALL THEIR HARDWARE AND SOFTWARE PRODUCTS what they seem to have done for OS X and iOS, they've got at least a fighting chance to recover from their losses after their stock peaked at about $700.00 /share.
    Keep up the good work!
    Dr. Bob Blomeyer

    After an new OS release that are always complaints about installation and configuration problems. First comers to using any new software tool provide valuable feedback we generally hope will help improve the new product. It's how things have worked since the first 6503 Apple II's and 8086 IBM PC's.
    I've been using and upgrading PC's since THOSE DINOSAURS! And I can't remember EVER having an OS upgrade go as smoothly as my recent upgrade from Mountain Lion Server (OS X 10.8.5 w. Server 2.2.2) to Mavericks Server 3.0.
    I chose to do a clean Mavericks install on a clean partition created on a 1 TB disk that was upgraded into my trusty MacBook. I used the DiskmakerX app to create a Mavericks installation USB drive. When the screen came up with the option to import users, programs & files (took a pass on email) from the Mountain Lion Server partition, I let it run overnight to transpose everything of value into the clean Mavericks installation.
    The next morning the only program that wasn't PERFECTLY installed and configured on Mavericks was Server 2.2.2. I deleted it and bought/installed Server 3.0. After Server 3.0's setup ran that only thing I had to do manually was start Postgres! My domain setting, DNS, all my web applications that were set up on Mountain Lion Server were all GOOD TO GO again on Mavericks Server!
    I'm disclosing this here, publicly because it was a BIG PAIN to install and deploy all my websites using Mountain Lion's server app. To say the easy transposition into Server 3.0 was an unexpected and pleasant surprise amounts to massive understatement.
    Now I'm going to describe two small anomolies I've noticed in either Mavericks or Server 3.0 that other users might want to be on the lookout for. They're not fatal. But they might be "habringers" suggesting underlying problems in either the new OS or the new Server's internals.
    The toolbar icon for TimeMachine doesn't "spin" when it backs up. It's not a big deal. But it's convenient to see the circle around the clock whirling so we know when TIme Machine is backing up.
    Mavericks Server isn't reporting newly upgraded apps as available under the Updates Tab of the Server's Software Updates subsystem. It might be inconsequential. But with a new OS version it never hurts to let the developers know about the "little things" that don't apparently work.
    Kudos to the Maverick's developers for releasing an OS X version that's THIS CLEAN. And hugs to Apple's management for making it a free download upgrade for developers!!!
    Full disclosue: I don't now and never have worked for Apple. but I do own a few shares of Apple stock that we purchased many years ago at $14.00 / share. I'm not a big shareholder. But based on my recent seamless upgrades to Mavericks and iIOS 7, I'm a happy one who's not likely to sell any time soon.
    If Apple can do for ALL THEIR HARDWARE AND SOFTWARE PRODUCTS what they seem to have done for OS X and iOS, they've got at least a fighting chance to recover from their losses after their stock peaked at about $700.00 /share.
    Keep up the good work!
    Dr. Bob Blomeyer

  • Any way to smoothly transition from animation to a menu?

    My DVD starts with an animation that, when it ends, forms the main menu background. The problem I'm having is that the only way I know to set up the DVD is to have it pause awkwardly in between the end of the animation and the menu background. This is my setup: I have the opening animation as the source of a track which then connects to the main menu with has the background graphic as its source.
    Is there any way around this so that the animation plays seamlessly into the main menu without the pause? Is there is a way to make the background for the main menu the entire, single animation, then somehow "turn on" the buttons and overlay file once the opening part is over and it settles to form the main menu background?

    Yes. You need to create one single video (in FCP) that is your opening animation that leads to your menu animation (you need to put all of your graphics in FCP, not DVD SP). Put a chapter marker at the point you want your buttons to pop on. Create an overlay file for your buttons. Sending the video to Compressor to encode as a m2v file. Then bring the .m2v and your overlay file into DVD SP, and drop them into your menu. Then set the loop point at your chapter marker.
    Now when someone plays your DVD, they will see what is before the loop point once and it will seamlessly go into the second half of your menu, which will endlessly loop.

  • How to start from a specific point on the timeline

    I have a horizontal list of image thumbnails, there are 21 thumbnails and only 7 are visible at one time and scrolls back and forth. It works fine.
    However, when I choose an image that is not in the first seven, say the 8th image, the page loads and the thumbnails goes back to the beginning images (undesirable). When the 8th image page is shown I would like the thumbnails to start at the eigth image, NOT from the beginning again.
    I had the animation positioned to the eight image for the start, with the first 7 off to the left and the second 7 off to the right. But when I saved and loaded it into the page, it just starts from the begining.
    How can I start the thumbnails from a specific desired position, such as the 8th image or the 15th image depending on the page?
    Thank you for any help.
    Anthony

    Hi Anthony,
    Thank you for your post.
    It would be better if you share any link or actual composition with us.
    Regards,
    Devendra

  • Problem with transitions after stabilizing clip

    Most often, but not always when I add a transition to a stabilized clip i get a jump, in frame size in the stabilised clip. Does anyone know how to fix this?
    I've seen some one ask this but not had any replies.
    Using latest which I think is 10.1.1

    Try turning the clip that "jumps" into a compound clip and apply the transition to that. (I'm just guessing here...)
    Also, the "latest" FCPX is 10.1.2 which seems to have fixed a lot of problems that were cropping up in 10.1.1.

  • FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

    Please help ASAP.
    Specs: IOS 10.6.8
    Processor 2.4GHz Intel Core i5
    Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
    Editing with FCP 7
    When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
    The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
    How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
    This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
    Thanks,
    MV

    What is your source material? Is it H.264? FCP does not work correctly with that material.
    Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
    Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
    MtD

  • Handling Smooth Transitions in SAP Lumira Chart Extensions

    I assume render is the function that does all the drawing logic for a specific Chart Type in VIZ Packer Utility. How do we handle any updates to the Data and do a smooth transition from the initialized State of the Chart to a final State as defined by Data.
    Currently I see render function as to Initialize SVG and implement some code that would display the Chart with initial Data.
    -- When the Data gets updated - I don't want to call render function which initializes my SVG again
    Is there a different function that makes use of the SVG that was initialized in render function and then apply updates to it that would create a smooth transition from Initial to Final State.

    Hi,
    I believe your question has been answered in your duplicate post here: http://scn.sap.com/community/lumira/blog/2014/06/28/cool-chart-extensions-demonstrated-at-lumira-codejam-vancouver#comment-502992
    In summary, You need to use VizPacker to package the extensions, then deploy those extensions to C:\Program Files\SAP Lumira\Desktop\extensions\ . this process is covered in detail in the supporting documentation SAP Lumira SDK (Chart extensions). See here: http://help.sap.com/lumira#section4
    regards,
    H

  • [SOLVED] Transition from Plymouth to LightDM

    I enabled plymouth-quit.service (equivalent to the old lightdm-plymouth.service) and there's still no smooth transition from Plymouth to LightDM. (I'm actually using the WebKit greeter, but it doesn't transition anyway from Plymouth to the ordinary GTK+ greeter). By this I mean that VT messages leaked through onto a black screen before loading LightDM. Does a way exist to smoothly transition between the two without showing the VT messages?
    Thanks in advance.
    Last edited by rainbowdashc (2013-11-16 15:17:36)

    karol wrote:Soooo .. how did you solve it?
    Maybe he did something like this?
    https://bbs.archlinux.org/viewtopic.php … 4#p1320104

  • Need smoother transitions between .swf's

    I have a website I am doing that has a flash intro with
    music. I then have the site itself which is also designed in flash.
    These 2 swf files sit on 2 different .html pages with an action
    that tells one frame to go to the next "page".
    My client whats it to be a smoother transition, almost like
    its going within the same .swf fles. I tried to save the flash .fla
    and just importat and try to figure it out how to import the
    intro.swf file into my main flash site and to just add it at the
    beginning. Bu this didn't work either...

    Try using a fade-in or a fade-out
    located in transitions
    between the pics
    play with the timing of the fade
    this helps between all pics
    but adds alot of time to the movie.

Maybe you are looking for