Smooth transition to another cam (3d style)

Hi there!
How is this effect called and where can I find information about how to do this in Premiere Pro / After Effects?
http://www.youtube.com/watch?v=egQ3Xf_8jBE#t=4m31s
from 4:31 to 4:34
Thanks a lot!

Thanks for your reply Jim Simon,
I'm pretty sure there are only two cameras and a badass software used
watch this for example:
www.youtube.com/watch?v=egQ3Xf_8jBE#t=2m38s
Impossible to install a few dozen cameras in the sky..
Edit: There are two more examples:
www.youtube.com/watch?v=egQ3Xf_8jBE#t=1m33s
www.youtube.com/watch?v=egQ3Xf_8jBE#t=3m26s

Similar Messages

Smooth transitions betwen audio

im ptreety new to the FCP world and am having trouble getting a smooth transition between two bits of audio (first bit is in sync with person on camera - second bit is voice over with other video) they are supposed to sound as though they were recorded at the same time (ie the guy you see talking at first is just continuing to talk over the other picture) but they weren't... the second section of audio was recorded at a different time so the level is a little different and the background hiss is different - and that's the biggest problem... when you hear that sound of nothing change its really easy to spot the cut in the audio... how can i smooth out this cut without having 'atmos' recorded at the locations when they were shooting?
can i dissolve the two bits of audio or something?
help! this is driving me crazy!

Get a third track of room tone sound put it under both clips to start. Yes, you can do audio dissolves. Slect the edit point on the clips and hit Command OptionT to add a dissolve. Also, you probably want to look into the audio filters for some EQ, etc. This is the basic way to get started. You might not be able to "cure" the problem, but you should be able to get it to sound a lot better.

In the synchronized application photos taken with another camera are distorted, as well as those taken on the site for the iphone

in the synchronized application photos taken with another camera are distorted, as well as those taken on the site for the iphone

Does the new IOS 8 and instagram only allow pictures taken with the phone? as I can still choose from those, just not the ones I upload/save.
I don't know about instagram, but apps, that not yet have been upgraded to iOS8 can only access the photos that appear in the "Recently Added" album, because there is no longer a Camera Roll.
As a work-around, try to create an album of the photos you want to share to instagram. For other apps this helped to make photos accesible.

Need smoother transitions between .swf's

I have a website I am doing that has a flash intro with
music. I then have the site itself which is also designed in flash.
These 2 swf files sit on 2 different .html pages with an action
that tells one frame to go to the next "page".
My client whats it to be a smoother transition, almost like
its going within the same .swf fles. I tried to save the flash .fla
and just importat and try to figure it out how to import the
intro.swf file into my main flash site and to just add it at the
beginning. Bu this didn't work either...

Try using a fade-in or a fade-out
located in transitions
between the pics
play with the timing of the fade
this helps between all pics
but adds alot of time to the movie.

Handling Smooth Transitions in SAP Lumira Chart Extensions

I assume render is the function that does all the drawing logic for a specific Chart Type in VIZ Packer Utility. How do we handle any updates to the Data and do a smooth transition from the initialized State of the Chart to a final State as defined by Data.
Currently I see render function as to Initialize SVG and implement some code that would display the Chart with initial Data.
-- When the Data gets updated - I don't want to call render function which initializes my SVG again
Is there a different function that makes use of the SVG that was initialized in render function and then apply updates to it that would create a smooth transition from Initial to Final State.

Hi,
I believe your question has been answered in your duplicate post here: http://scn.sap.com/community/lumira/blog/2014/06/28/cool-chart-extensions-demonstrated-at-lumira-codejam-vancouver#comment-502992
In summary, You need to use VizPacker to package the extensions, then deploy those extensions to C:\Program Files\SAP Lumira\Desktop\extensions\ . this process is covered in detail in the supporting documentation SAP Lumira SDK (Chart extensions). See here: http://help.sap.com/lumira#section4
regards,
H

IPhoto will no longer import photos from any of my another cameras.

iPhoto will no longer import photos from any of my another cameras after importing photos from my iTouch.

Does the camera mount to the desktop so you can look to see what is there? Have you tried Image capture (in your applications folder) to import the photos? Have you tried unchecking hide previously imported to see what that shows? Do you have a USB card reader to try? When did you last reformat your memory card?
If you can get the photo off the card using any method do so and tehn use yoru camera's format command to reformat the card
LN

Smooth transition in jframe

I'm creating a jframe that is going to contain buttons that will laucn pop ups to have questions answered.
Is it possible, to create a jframe that would, when a button is pressed, transition into another panel with the needed text boxes, and then transition back once user input is done?
Thanks

Yes, but don't! Just make different JFrames and transition back to your main JFrame when you are done. It will give you the oppotunity to prepare offscreen what ever you wish to show, and that will make for a much easier transition.

Preset imports and "smooth" transitions

Good Morning!
I have 2 things that i needed help on:
1) I always struggle with each update of Premier. I always lose my presets (effects) that are both in "My presets" and My favorites. I don't know why these don't transport with the update, but they are gone again. I did take the time to export my old presets in 8.0, but now in 9.0 I don't see where it gives me the option tyo import anymore? Can someone help?
2) Once I either get my back my presets or create new ones, I struggle wit that perfect transition. Anotherwords, I always seem to drag a prest to my picture and then when it plays, the frame is frozen for a split second, then effect executes, then effect stops. I always have to go in and edit the effect and drag the "button" for rotation or scale to either end of the frame to get my smoothness? So ..
- Is there a way to create a preset and have it know I want the scale or rotation to start at the very beginning and end at the very end?
- And is ther a "best way" to create the movie. Like do I add transitions first and then drag presets, or drag presets and then add transition. It seems if I do either or, my prest gets truncated in the image.
Thanks for any help!!

For the "smooth Transitions," one must set the In & Out Points of the Clips, so that there are adequate Handles, to allow for the Transitions. If one does not have adequate Handles, one of two things will happen, depending on the structure of the Clip:
If there are no more Frames, then the last one will be repeated, as a Freeze Frame.
If there are Frames, but they are in the next "scene," then material that was believed to be removed, will appear in the Transitions.
This ARTICLE will explain Handles in detail. The secret is to move the In and/or Out Point, to allow for adequate Handles.
Good luck,
Hunt

BEGINNER: Best Framerate for smooth transitions

My animation is jagged in movement.
What would be the best framerate for a smoother transition?
Right now I'm using the default 12FPS
Should I make it higher or lower and if so, by how much?
This is the animation:
http://www.tarilynquinn.com/site/SE_INDEX.html
Help would be much appreciated.

Higher framerates do make for smoother animations -- up to a point. Depending upon how many things you have going on and the computer in use a really high frame rate can cause some machines to choke and then it will look worse than a lower frame rate.
I recommend getting a rate that you work at and that you tailor all your designs to meet work at that rate. That way if you need to combine assets later they will be compatible. And you will have a feeling for the rate.
At work we are now doing everything at 24 and at home I use a 30. I think both of those are pretty reasonable and that most machines these days will be able to handle those rates.
Of course there are always times when for a very specific reason I might use a different rate, but I only do that knowingly and not just because, "eh, seems like a good idea."

How do I do smooth transitions between clips?

After trimming clips, what type of effects do I need to use for smoother transitions? I tried several types of video transitions, for example Crossover Dissolve between the clips. But I want to show as if I never did any cuts or clippings even though I have done it. Did I make this clear?

You may want to ask yourself, "Why do I want to use a transition?"
As you think about this question watch any network TV program and look for the transitions. You will generally find very few transitions in a professional video. Those you do find will generally be dips to black rather than cross-dissolves. You will generally find cross-disolves being used only where the editor wanted to give a sense of time changing.
This s a situation in which less is more. I believe that a 1 sec cross-dissolve draws more attention to itself than would a 0 second cut.

Help with Flash smooth transitions

Can someone please tell me how I can make a Flash movie like
this one
here
where it transitions smoothly from one image to another.
I have been using Flash for a while at a basic level, but my
attempts at such movies always seem to be jerky. When I create them
I use a simple motion tween using fade in and out with Alpha
between the images as that's what I have read in tutorials to
create these. I have also tried increasing the frame rate as I read
that could help, but it still doesn't look right. I have put a copy
of my latest attempt
here and you can see
it's juddery between transactions, and I don't even really want the
fade effect, I just want it to transition smoothly between images
as in the Broadmoor example above.
Do I have to use Actionscript to make a more professional
movie like the one linked to? If so, I have never used Actionscript
before so would appreciate if someone can point me to a tutorial
etc.
Thanks a lot in advance for any help or suggestions.

Are you fading the second image in as the first image is
fading out? If so try layering all of the images in the order you
want and fade just the top image out so the one underneath appears.
If you want to have it loop just have the very first image appear
again as the last image and then use actiomscript to jump back to a
frame where the same image is fully loaded at the beginning... I
hope this makes sense. If not please let me know and I can try to
explain a little better.

Smooth transition.

I have problem to make smooth jump. I created 30 sec clip animated menu, than it jumps to menu 2 not smoothly. Even if I use the dissolve transition its even worse. It goes to the first frame stops and than transitions into next menu. I tried to make a track and first play and than go to a still menu... the same thing. I also noticed that a still picture that was captured as the last frame of the animation is smaller horizontally.
Any help will be appreciated.

On the sound issue, there will be a break if using two menus
On the menu issue (sounds like this will work if I understand what you are tryng to to do) and approach that may be what you need is to have the menu with video extended woth a loop point at 30 seconds where buttons will be active, and make fades and transitions as part of the menu background (video)
An example is here
http://dvdstepbystep.com/motion.php
And another example (which shows how to use DVD SP templates if you want as part of it) with Final Cut here
http://dvdstepbystep.com/useelements.php
And both of those will play audio straight through

Playback not smooth with BlackMagic Cinema Camera 2.5k RAW content

Hello, My name is Oudom. From Cambodia. I'm using BlackMagic Cinema Camera 2.5k. and my Premiere Pro CC does not seem handle (Playback) the 2.5k Raw file smoothly. m not sure if i miss something installed or my spec doesnt good enough
So here is my PC Spec:
Windows 8.1 Pro
Processor: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz 3.20 GHz
RAM 32GB
GPU: Quadro K4000
Motherboard: ASRock X79 Extreme6
with DeckLink 4K Extreme
If this Requirement cant Handle 2.5k Raw File. is there any workflows to work out this ?

Sorry for late replied, I'm using Decklink but I didnt use DeckLink to send video out to an external monitor, just using VGA to send video out.
The content files are on internal drive
TOSHIBA DT01ACA300 3TB 7200 RPM
I have another question. you said if i'm using the decklink to send video out to an external monitor, you want me to disable transmit and see if the video plays smoothly within premiere ? is it not people that buy decklink just to do that ? I thought using monitor output from decklink could do better performance. and its the reason I buy decklink. I'm sorry but i'm still new to these things.
Please explain me more about this, I need to work with RAW files everyday. I need to run the videos very smooth. what do i need to do? or because of my CPU is just i7 ? do i need to use like Xeon to run it smoothly ?? please help me I'm so lost

When I have two audio clips next to eachother, how do i 'dissolve' them so its a smooth transition from one to the next?

I have a few clips besides eachother.. levels are up and down, but i want to do an 'audio dissolve' per se, or fade from one audio clip into the other.. to make it smooth.. how do i do this? thanks

One might think that you could simply drop a transition effect on to two connected audio clips to fade from one to the next. In fact, that's what the menu seems to imply:
But you can not. No transition effects can be attached to Connected Clips. The menu lies!
There are however several ways to do accomplish the transition.
You can overlap them and drag the fade gadgets like this:
Another way is to transform the audio clips to a secondary Storyline (command-g). This will allow you to use transitions.

Smooth transition from Mountain Lion Server to Mavericks Server 3.0!!

After an new OS release that are always complaints about installation and configuration problems. First comers to using any new software tool provide valuable feedback we generally hope will help improve the new product. It's how things have worked since the first 6503 Apple II's and 8086 IBM PC's.
I've been using and upgrading PC's since THOSE DINOSAURS! And I can't remember EVER having an OS upgrade go as smoothly as my recent upgrade from Mountain Lion Server (OS X 10.8.5 w. Server 2.2.2) to Mavericks Server 3.0.
I chose to do a clean Mavericks install on a clean partition created on a 1 TB disk that was upgraded into my trusty MacBook. I used the DiskmakerX app to create a Mavericks installation USB drive. When the screen came up with the option to import users, programs & files (took a pass on email) from the Mountain Lion Server partition, I let it run overnight to transpose everything of value into the clean Mavericks installation.
The next morning the only program that wasn't PERFECTLY installed and configured on Mavericks was Server 2.2.2. I deleted it and bought/installed Server 3.0. After Server 3.0's setup ran that only thing I had to do manually was start Postgres! My domain setting, DNS, all my web applications that were set up on Mountain Lion Server were all GOOD TO GO again on Mavericks Server!
I'm disclosing this here, publicly because it was a BIG PAIN to install and deploy all my websites using Mountain Lion's server app. To say the easy transposition into Server 3.0 was an unexpected and pleasant surprise amounts to massive understatement.
Now I'm going to describe two small anomolies I've noticed in either Mavericks or Server 3.0 that other users might want to be on the lookout for. They're not fatal. But they might be "habringers" suggesting underlying problems in either the new OS or the new Server's internals.
The toolbar icon for TimeMachine doesn't "spin" when it backs up. It's not a big deal. But it's convenient to see the circle around the clock whirling so we know when TIme Machine is backing up.
Mavericks Server isn't reporting newly upgraded apps as available under the Updates Tab of the Server's Software Updates subsystem. It might be inconsequential. But with a new OS version it never hurts to let the developers know about the "little things" that don't apparently work.
Kudos to the Maverick's developers for releasing an OS X version that's THIS CLEAN. And hugs to Apple's management for making it a free download upgrade for developers!!!
Full disclosue: I don't now and never have worked for Apple. but I do own a few shares of Apple stock that we purchased many years ago at $14.00 / share. I'm not a big shareholder. But based on my recent seamless upgrades to Mavericks and iIOS 7, I'm a happy one who's not likely to sell any time soon.
If Apple can do for ALL THEIR HARDWARE AND SOFTWARE PRODUCTS what they seem to have done for OS X and iOS, they've got at least a fighting chance to recover from their losses after their stock peaked at about $700.00 /share.
Keep up the good work!
Dr. Bob Blomeyer

After an new OS release that are always complaints about installation and configuration problems. First comers to using any new software tool provide valuable feedback we generally hope will help improve the new product. It's how things have worked since the first 6503 Apple II's and 8086 IBM PC's.
I've been using and upgrading PC's since THOSE DINOSAURS! And I can't remember EVER having an OS upgrade go as smoothly as my recent upgrade from Mountain Lion Server (OS X 10.8.5 w. Server 2.2.2) to Mavericks Server 3.0.
I chose to do a clean Mavericks install on a clean partition created on a 1 TB disk that was upgraded into my trusty MacBook. I used the DiskmakerX app to create a Mavericks installation USB drive. When the screen came up with the option to import users, programs & files (took a pass on email) from the Mountain Lion Server partition, I let it run overnight to transpose everything of value into the clean Mavericks installation.
The next morning the only program that wasn't PERFECTLY installed and configured on Mavericks was Server 2.2.2. I deleted it and bought/installed Server 3.0. After Server 3.0's setup ran that only thing I had to do manually was start Postgres! My domain setting, DNS, all my web applications that were set up on Mountain Lion Server were all GOOD TO GO again on Mavericks Server!
I'm disclosing this here, publicly because it was a BIG PAIN to install and deploy all my websites using Mountain Lion's server app. To say the easy transposition into Server 3.0 was an unexpected and pleasant surprise amounts to massive understatement.
Now I'm going to describe two small anomolies I've noticed in either Mavericks or Server 3.0 that other users might want to be on the lookout for. They're not fatal. But they might be "habringers" suggesting underlying problems in either the new OS or the new Server's internals.
The toolbar icon for TimeMachine doesn't "spin" when it backs up. It's not a big deal. But it's convenient to see the circle around the clock whirling so we know when TIme Machine is backing up.
Mavericks Server isn't reporting newly upgraded apps as available under the Updates Tab of the Server's Software Updates subsystem. It might be inconsequential. But with a new OS version it never hurts to let the developers know about the "little things" that don't apparently work.
Kudos to the Maverick's developers for releasing an OS X version that's THIS CLEAN. And hugs to Apple's management for making it a free download upgrade for developers!!!
Full disclosue: I don't now and never have worked for Apple. but I do own a few shares of Apple stock that we purchased many years ago at $14.00 / share. I'm not a big shareholder. But based on my recent seamless upgrades to Mavericks and iIOS 7, I'm a happy one who's not likely to sell any time soon.
If Apple can do for ALL THEIR HARDWARE AND SOFTWARE PRODUCTS what they seem to have done for OS X and iOS, they've got at least a fighting chance to recover from their losses after their stock peaked at about $700.00 /share.
Keep up the good work!
Dr. Bob Blomeyer

Smooth transition to another cam (3d style)

Similar Messages

Maybe you are looking for