Smpatch no longer works after update from SUC proxy!

Hi,
I ran smpatch update against our local SUC proxy. It said some patches needed a reboot so I did "init 6" after it finished and the system shutdown, installing some patches, and then booted again...
Now the system as such seems to work fine but "smpatch analyze" fails with this weird error:
Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_21/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space?
And just running "java" fails with the same error message.
However running "java -client" works!
Any ideas how to fix this?!?
I tried to install the latest recommended patch cluster but that did not help. )-:
Alternatively is there a way to make smpatch use "java -client" so that it works?
Thanks a lot in advance!
Best regards,
Anton

krubar wrote:
I have same problem on Sparc system (Solaris 10). Does anybody know how to fix it ? I can't change symbolic link for javaAre you certain that you are experiencing exactly the same issue? Did you follow the hyperlinks to the Sun Solve documents above?
The Sun Solve document itself states:
1. Solaris 8 and 9 and OpenSolaris and Solaris 10 on the SPARC platform are not impacted by this issue.I would suggest that you open a Support Call with your local solutions centre.

Similar Messages

  • Webstart no longer works after update from Java 7 Update 67 to Java 7 Update 71/72

    Hi,
    We have an application that is launched via Webstart.  Last year, we had to make a bunch of changes to the application in order to work with Java 7 Update 45.  It has been working fine up to and including Java 7 Update 67.  However, it is no failing with Java 7 Update 71 and 72.  Upon launch it is giving the error below. I have searched online and found other articles related to the AccessControlException but they are about 7 years old.  I also tried adding this to the java.policy file with no luck.  Any ideas or help would be appreciated to determine what I can do to get this to work for update 71.
    java.security.AccessControlException: access denied ("java.util.PropertyPermission" "eclipse.exitcode" "write")
        at java.security.AccessControlContext.checkPermission(Unknown Source)
        at java.security.AccessController.checkPermission(Unknown Source)
        at java.lang.SecurityManager.checkPermission(Unknown Source)
        at org.eclipse.osgi.framework.internal.core.FrameworkProperties.setProperty(FrameworkProperties.java:64)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:216)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
        at org.eclipse.equinox.launcher.WebStartMain.basicRun(WebStartMain.java:78)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
        at org.eclipse.equinox.launcher.WebStartMain.main(WebStartMain.java:56)

    krubar wrote:
    I have same problem on Sparc system (Solaris 10). Does anybody know how to fix it ? I can't change symbolic link for javaAre you certain that you are experiencing exactly the same issue? Did you follow the hyperlinks to the Sun Solve documents above?
    The Sun Solve document itself states:
    1. Solaris 8 and 9 and OpenSolaris and Solaris 10 on the SPARC platform are not impacted by this issue.I would suggest that you open a Support Call with your local solutions centre.

  • RRI no longer working after update from BI 7.0 SPs15 to SPs17

    Hello,
    since the upgrade of our BI-7.0 (2004s) from SPS15 (BI-ABAP SP17, BI-Java SP15) to SPS17 (BI-ABAP SP19, BI-Java SP17), we have a strange behaviour in our RRI-jumps (which worked fine with SPS15!) from WAD-Reports (SAP-Portal) to the ECC (via ITS-based Web-GUI):
    1) on first traversal in the Portal session, after login on to the ECC system, the SAP Easy Access page is displayed instead of the target transaction (nothing special: MM03, VA03, ...)
    2) on all subsequent traversal, a remote login page (from the ECC to the BI system) is first displayed; after doing the remote login (i.e. specifying the BI account), the target Tcode in ECC is displayed with the targeted data.
    This strange behaviour is new since the update. Before that, RRI worked as expected, bringing the user directly to the TCode after a first login.
    Has someone else experienced this behaviour and how was this problem solved?
    Thanks in advance,
    Hans.

    We faced similar problems with jumps after upgrading to SPS15.
    THe jumps from the 7.0 charts resulted in javascript error.
    And jump to infoset query with larger dataset resulted dump .
    SAP recommended application of java patches. But those java patches broken lot many things and hence not implemented.
    Abhijeet

  • Canon iP2700 is no longer working after update

    My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2  from  https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
    tail -n 100 -f /var/log/cups/error_log
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
    I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
    D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
    D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
    D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
    D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
    D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
    The CUPS ownership of the USB device file seems OK:
    ls -l /dev/bus/usb/001/006
    crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
    I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
    EDIT
    I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
    Last edited by otx (2012-03-09 14:21:27)

    See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

  • Gmail Push no longer works after update to iOS 4.2.1

    I have tested this several times. What previously worked as push yesterday no longer works as push from my Gmail account today after updating to 4.2.1. Is anyone else having this issue? In order to get mail to show up on my phone, I have to go into Mail on my phone. Then the little connecting thing starts up and all the mail since the last time I checked appears.

    This may be related -- I just updated my iPhone to 4.2.1 from 4.1. I immediately found that my Google Apps accounts, which had been configured as vanilla IMAP in Mail.app and successfully synced with iPhones as such for the past couple of years, have now started to sync with my iPhone as gmail accounts (not plain IMAP) and have therefore completely lost the custom From addresses, as it seems the iPhone does not allow custom From addresses in gmail accounts. (The accounts list in iPhone mail now has little red gmail icons instead of the generic blue account icons.) It also seems that push no longer occurs, whereas it certainly used to.
    Deleting all of the mail accounts from the iPhone, power-cycling the iPhone and then freshly syncing mail accounts from iTunes results in the same outcome. It is as though the iPhone is looking at the IMAP/SMTP settings and inferring that since they end with .gmail.com that the accounts are of type gmail, regardless of the fact that I have said that they are plain old IMAP. (It is tempting to create a noddy domain with CNAMEs pointing at {imap,smtp}.gmail.com just to fool the iPhone however it would probably then complain about invalid SSL certificates.)
    I deleted one of the accounts and recreated it manually on the iPhone. This lets me create a plain IMAP account even with {imap,smtp}.gmail.com server names, however when editing the address field, the keyboard which appears is bizarre -- no comma key! (Yes, I searched the various modifier keys, etc.) So, I copied a comma into the clipboard, pasted it into the middle of two From addresses and was at least mildly relieved to find that the mail program did then let me choose between the addresses. However, given half a dozen Google Apps accounts and a plethora of custom From addresses, there is no way that I am going to create this stuff manually. Maybe I will give that CNAME trick a go after all...
    My iPad on 4.2 is fine, however I have a hunch that I have not since resynced mail accounts to it since updating. I'll certainly not be daring to do that now.

  • Firefox no longer working after update to 19.0.2

    Firefox no longer works after auto update to 19.0.2

    Hello vinaysingh, check if your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) preventing Firefox from connecting to the Internet.
    see for more info : [https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating#os=win7&browser=fx19 Fix problems connecting to websites after updating Firefox]
    thank you

  • BlackBerry Classic front camera no longer works after update

    The front camera on my BlackBerry Classic no longer works after the 10.3 update. The BBM video chat does not work either - error message, another application is using the camera. I tried rebooting and a factory reset and the problem still persists. Please help.

    Hi,
    the Classic was shipped already with 10.3
    What 10.3 version do you mean exactly?
    Alex
    Please feel free to hit "Like" if my post was helpful :-) Thank You!

  • Airport Express b/g no longer working after update to Airport Utility 5.3.1

    after updating to this the other day, my AE b/g no longer works - like many others on the forum, i get the flashing amber / yellow blinkie light situation. i can hard reset it and get it to initially show up in AU 5.3.1, but once i try to join it to my wireless network (i use it with my laser printer) it never takes, disappears from AU, and sits there flashing relentlessly.
    seems pretty clear that it's related to the 5.3.1 update - it was working fine for nearly 2 years without any issues prior to this. i find it hard to believe it had a total failure related to this - in fact, i just finally updated yesterday after being asked to for 2 weeks, and that's when it stopped working, no question about it.
    any ideas on getting it to work? i've tried everything on these forums to no avail. or am i stuck waiting on AU 5.3.2?

    I just solved the same issue. First I reset my whole network from scratch by hard resetting all devices (1 AEBS N and two AXg). Then I started configuring my main base station and added the other devices to the network one by one. (I have a WDS). Only after setting all the devices to channel 6, did the green light stay on.
    Apparently when you configure a AX to participate in an existing WDS network and you enter the existing network name in the configuration panel of Airport Utility, it creates a separate network with the same name. In order to force it to join the existing network, make sure their Airport ID numbers are entered under the WDS tab in Airport as WDS remotes.
    Check this thread for the details: http://discussions.apple.com/thread.jspa?threadID=1440997

  • HELP! iPod no longer works after update

    I've been using my 20gb clickwheel ipod without incident for a year now, my last update had been iTunes 5 and hadn't updated my iPod recently either (why bother..it worked fine?).
    I wanted to purchase music from the iTunes music store, but it wouldn't let me unless I upgraded to iTunes 6 and updated my iPod. OK - so I did that- upgraded iTunes to 6.0.1 and updated tghe iPod using the latest updated dated 2005-10-12. Then the horror begins.
    On the first attempted synch post update - my iPod screen turned into a folder/exclamation point icon and stopped working. I tried resetting by holding down the center button and menu..it restarted and went back to the same folder/exclamation point icon. No luck.
    I've tried restoring it repeatedly and then synching my library back to the now clean and restored iPod and it stops synching at different points and crashes (after 31 songs - crash iTunes - iPod freezes on the "Do not disconnect" screen - strange clicking noise - restore - try again - 58 songs...same... restore ..again...45 songs.. you get the picture).
    It worked fine BEFORE the update except I couldn't purchase music. There has been NO change except installing the updates (it hasn't been jostled, dropped or anything). What can I do? The update killed my iPod?!!!! I am at my wits end!!!!!!
    -Tory

    OK..I've tried many things and my iPod is still hosed after updating. I upgraded my Mac to Tiger. I was told that the there might be some issues with synching using firewire with the new update - so I bought a USB cable and tried synching with that.
    I have the same issue as before. I can restore the iPod, but when I start synching my music from Itunes back to the blank, restored iPod - it synches up anywhere from 20-200 songs and then freezes (spinning beach ball on one song halfway synched for an hour - then force quit iTunes - and start all over again: restore, synch, crash).
    You know, I got burned by the 1st generation 5gb iPod battery issue, then the headphone jack stopped working on my 2nd generation, now my monochrome clickwheel iPod freaks out after Apple forces me to update so I can get my paid music back (it removed, yes, REMOVED my purchased songs because I was still using an older version of iTunes - when I updated to 6 I got them back - how Microsoft is THAT?).
    I am really losing my faith in Apple's ability to make a quality product.I am despondent. If anyone has any advice - I would be most grateful...

  • Import form cam no longer works after Update to iLife 09

    Hi, I've updated to iLife 09 and installed the most recent patches. With iLife 08 my Fujifilm Finepix F30 was recognized by my mac book pro, iPhoto starded up an the contet of the cam was presented for import as soon as I connected it by USB. With iLife 09 all this no longer works. iPhote is fired up but nothing else happens but that iPhote freezes so the only thin I an do is to kill it ... now it's more or less useless for me
    Please help !
    TIA
    frantek

    Start with the troubleshooting basics:
    1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    2. Repair Permissions using Disk Utility
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD

  • Airport no longer works after update.

    I occasionally use my imac as a base station to connect a laptop to the internet via airport. Since installing the recent security updates my laptop can no longer see a network (I also connect via a pda and this no longer works either).
    Airport indicates full signal strength but clearly there is no network.
    Tried deleting prefs but still wont work.

    Hi there BDAqua...
    I used this Pacifist software and followed instructions on this thread, rebooted, nothing seemed to change. Repaired permissions, nothing changed... I thought, oh well! Maybe I'll go to my local (Warsaw Poland) Apple repair centre.
    Sadly, I put my computer to sleep, about an hour later, opened it up with ethernet cable attached for internet, and noticed the wireless icon was now dark... lo and behold, clicked on it and my network was checked (this after having had my password "rejected" a million times before) and ... I carefully slipped the ethernet cable out of the socket... and I was still connected.
    So my wireless is working again, since doing all that stuff (back to prior firmware version) but for the life of me I don't know why, since it didn't seem to be fixed immediately after all that tinkering and rebooting! Any thoughts?? Did I actually do something that fixed it (must be, since I finally fooled around with it after almost 3 weeks of no wireless) or was this just random??
    This is far too un-Apple-ish, by the way! I was used to this with PCs, but first time I've ever had to get so technical with my Mac!

  • Control key no longer works after update.

    After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
    This is left control key though. Right still works?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • Bookmarks no longer work after update to ios7.1

    After updating iPad to iOS 7.1 today, almost all of my bookmarks in Safari no longer work. What's up?

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Home Sharing no longer working after updating iTunes

    After updating iTunes on both my computers to version 10.7, the home sharing feature is now not working. One computer can see and access the other's library but the other cannot see its. I have checked the sharing preferences on both computers. Both have 'Share my library on my local network' and 'Share entire library' checked and neither are set to require a password. I have turned on home sharing from the 'Advanced' sub menu in the menu bar and both use the same Apple ID.
    Any thoughts on how I can fix this. I think it is just a bug and should hopefully get fixed but maybe it's just me.    

    I'm up and running. Spoke with Apple and they had me go to : preferences, network and create a new location. That seems to have reset something. I had to reset all my devices back to my main network that had stopped working. The guest network will not let Home Sharing work, only the main network.
    Others have been able to use Home Sharing without clicking "Done" after typing in their password. After you click "Done" the Shared disappears in iTunes.
    Apple help people were GREAT!

  • Scrubbing no longer works after updating to Yosemite

    After updating to Yosemite yesterday and restarting this morning, I've noticed several problems.  The biggest is that scrubbing in the timeline is very buggy, unresponsive, and sometimes doesn't work at all.  I've tried turning it off and on, restarting FCP and my mac to no avail.
    Also switching between tools via keyboard shortcuts and the playhead moving between edits have been sluggish as well.  Library is stored on a thunderbolt connected RAID
    FCP v 10.1.3    Yosemite v10.10   Mac Pro  Processor: 3.5GHz 6-Core Intel Xeon E5  Ram: 16GB   GPU:  AMD FirePro D500

    Permissions issues from the new account?
    My impression, from my own experience and paying attention to other users' issues, is that 10.1.3 running on 10.10 is generally the fastest, most stable combination since the application was first introduced. This weekend I did a full days work on a couple of unfamiliar systems, new iMacs with shared storage, over two dozen projects, and I encountered no glitches whatsoever.
    So that's why I was interested in your media drive and whether there might be something in your user account that the OS or FCP was struggling with.
    Here is a kind of check list that Richard Taylor compiled. Why not go through it to see whether you discover a remedy.
    Russ

Maybe you are looking for