SMQ1 - obsolete qRFC outbound entries

Hi All,
We have Blocked the RFC and unrigistered the queues pointing to our CRM system as it is decomissioned.
But stillthe outbound queues were generating in my system towards CRM.
Could any one help on this ,how to stop generating those queues and also explain me why those are generating.
Thanks & regards,
Yogesh.

HI Harish,
Thank you for your reply...
Do you know why these queues are generating...?
As far I know..even if we deactivate the port and parnerprofile..Idocs will be generates.(Do correct me if I am wrong)
so please help me some more way to stop the genarating queues.
thank you.

Similar Messages

Monitoring qRFC outbound queues

Hi,
I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
Does anyone have experience with this?

Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
That should put you in the right direction.
Regards
Juan

QRFC Outbound queue errors

Hi All,
I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
The status is "SYSFAIL " .
Can anybody tell me how to solve them.
Regards,
Anindya

HI Anindya,
It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
Reward Points if helpful
Cheers
Manohar

How to read data from qRFC queue entry

As we know already that qRFC is to queue & execute RFC function modules asynchronously. From any qRFC queue having entries, is it possible to read the content of a particular entry? Here content means, i am more intersted to know the singnature of a particular RFC function module waiting in the queue. Is there any API already available from qRFC framework for the same? Any quick help in this regard would be greatly appriciated.

Hi,
This issue is resolved.

SYSFAIL in qRFC Outbound Queues - You are not authorized to logon

Dear Guru's,
I am new to BASIS. During health check for my company, I came across T-Code SMQ1 and found many Queue Status "SYSFAIL". Error message "You are not authorized to logon to the target system (error code 0)".
The souce system:
SAP 7.0
Component: CRM 5.0
DB : MSSQL 7.0
Kernel: 700
The target system:
SAP 7.0
Component: SAP ECC 6.0
DB : MSSQL 7.0
Kernel: 700
Firstly,
1. I login to CRM Quality Assurance Client 600. Execute SMQ1. Enter the Queue Name. Below is what I found.
http://img.photobucket.com/albums/v347/albumster/SAP/001-SMQ1-SYSFAIL.jpg
2. Once I Choose the row, I found the below error.
http://img.photobucket.com/albums/v347/albumster/SAP/002-SMQ1-NotAuthorized.jpg
3. I thought its an authorization issue so enter T-Code PFCG and added user COLACOM to Role Z_TRUSTED_RFC and do a user comparison. To my surprise, He was already given the authorization before!
http://img.photobucket.com/albums/v347/albumster/SAP/003-SMQ1-GivenAuth.jpg
Please advise.
If you need more information, please let me which T-Code to use so I can capture a print screen.
Thank You,
Jacky

Ok you need the folowing options in your word document:
1 .Start Word without any EWA.
2. Menu Extras=>Makro=>Security
2.1 Register "security level"=> the last or 2nd last radiobutton
2.2 The other Register = Set Checkbox "...Visual Basic Project ..." =true.
Then it should be work...
/greetings nico
Edited by: Nico Effenberger on Jan 28, 2009 5:15 PM

QRFC outbound queue

Hello all,
In the outbound queue of a R3/ECC system, I find messages with status as "Message edited in the target system".
What could be reason for this and what is the work around to solve this problem ?

Hi,
Did you get resolutoin to your problem here? We have BI queues in ECC which have been running just fine for over a year now and out of no where this just started happening to one of our LO extraction processes in ECC. We have raised our issue to SAP but at this point can not find any notes pertaining to this type of message being in a ECC outbound queue for BI.
thanks

SMQ1 outbound queue

Hi Experts,
Could you please let me know the purpose of SMQ1 and SMQ2.
Because when i saw the transaction SMQ1 i am able to see even the queues for
0FI_GL_6
0FI_GL_7
1_CO_PA333ZPAC4.
But when i saw the transaction LBWQ it only contains the Logistics related extract structures.i am aware of LBWQ where the user postings will be saved here with the help of VI Update.
Regards,
Sunil Kumar.B

Hi,
SMQ1 and SMQ2 is used to view the Outbound and Inbound Queue :-
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
You can get more help from following link :-
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Navesh

QRFC and tRFC outbound-queue

in SXMB moni entries,
when the message is
for example inbound: IDOC and outbound: AENGINE, the queue seen is a tRFC outboud-queue,
and when inbound: IDOC and Outbound: PE, the queue seen is a
qRFC outbound-queue
can u explain me why this>?
but nowhere i can see inbound-queues in the MONI. means XBTI* or XBQI*...
can u explain me why?

Hi,
Please see the below link
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Regards
Chilla

Qrfc and smq1

hi experts ,
What is the relationship between RSA7 and the qRFC monitor (Transaction SMQ1 ?
regards

hai,
RSA7 DELTA QUEUE MONITOR
qrfc -outbound queue
when the data going the deltra extraction we want to see the process..at the time we using rsa7. qrfc which the going out how many dtas still waiting..that means queues...we find useing this transaction code..
thanks.
if its usefull assign points.
prakasu.

WM* queues in SMQ1

Hi experts -
We are seeing multiple entries in SMQ1 in our ERP system that have destination "NONE". These queue names all start with "WMIMA'....
I know we are not using these queues, and I would like to deactivate them from queueing up. Can anyone provide any advice as to how to do so?
Thanks!
Abby

Hi Abby,
I never heard of such error, and I am looking for any expert answer on your issue, and
I need some information of how SMQ1 works, in general business(Functional words).
        SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
·        SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
If anyone could explain in general words with complete business scenario would be great help, and If anyone could give it with Inventory Datasources? With the answer to abby's question would be appreciable.
Thanks in advance..
Good weekend...

SXMB_MONI: Message scheduled on outbound side

Hi,
one message sticks in the integration server. The status is "Message scheduled on outbound side". Instead of the target flag there is a green flag in the column outbound status. The queue is registerd, <b>following messages were processed succesfully</b>. QRFC-Monitor is empty.
If I start outbound channel monitor, I can see one entry.
If i mark the outbound entry and click "display queue entry" the following message is shown (Transaction RFC):
XIAPPLUSER IDOC_INBOUND_ASYNCHRONOUS CRP_100 18.01.2006 11:00:23 Transaction executing C0A83D0E0D9C43CE11B70077 ...
What to do?

Hi Jayakrishnan Nair,
SM58 returns one entry:
XIAPPLUSER IDOC_INBOUND_ASYNCHRONOUS CRP_100 18.01.2006 11:00:23 Transaction executing C0A83D0E0D9C43CE11B70077...
So the status is still "transaction executing"...
Now I have checked WE02 in the target system and I have found the IDOC being successfully posted 2 hours ago!
It seems that you were right, that the acknowledgement was not received by XI.
I am going to delete that entry in SM58...
Hopefully this will not happen again in the future!
Thanks to all for your help! Points rewarded.
Regards,
Christian

Difference between TRFC and QRFC

Dear all,
i understand that TRFC functions as EO and QRFC functions as EOIO.
but can anyone of u pls make me understand there significance with a practical example :
1. in terms of XI
2. without XI when we say that one R3 is connected to other with say TRFC or QRFC
pl help

Hi! Tarang,
I just adding few points in this forum...Actually your question and some of the answers given are different .Some of them are deviating the topic.
According to my knowledge and as per SAP documentations also I am adding these points. Correct me if I am wrong.
At first QRFC , TRFC are different from the BE, EO and EOIO because trfc are message protocols and BE , EO and EOIO are nothing but Quality of Services (QOS).
You can check this in the below URL::
http://help.sap.com/saphelp_nw70/helpdata/EN/0d/5ab43b274a960de10000000a114084/frameset.htm
QOS is one of the property of TRFC's.
1) See Got o SMQ1 an SMQ2 what you will found:: ?
QRFC Monitor Outbound Queue and QRFC Monitor Inbound Queue. both Queues QRFC s common.ok its a simple thing.
2) Also lets take IDOC Adapter for IDOC whether it may be File to IDOC or IDOC to File Scenario where you will monitor the IDOC in SM58 also right ? why because this TRFC's are mainly for communicating with one SAP system to another SAP System. IDOC is mainly sending data via TRFC ports. That is why you ill monitor the IDOC if data doesn't reached means in Transaction COde:: SM58.
3) QRFC Outbound and QRFC Inbound is mainly for communicating with SAP System and Non SAP Systems. Okay you can get this information in the below further explination and link.
Note::qRFC communication is an extended form of tRFC communication. It adds a serialization concept to the transactional concept of tRFC.
http://help.sap.com/saphelp_nw70/helpdata/EN/3b/befa40badbf46fe10000000a1550b0/frameset.htm
Some applications use qRFC with outbound queue to improve system performance and not for serialization. If this is the case, you can switch automatically from the qRFC LUW with outbound queue to the tRFC LUW to avoid a hanging queue if a SYSTEM_FAILURE occurs
Note:: To cancel a background job if tRFC errors occur use program RSARFCEX to restart tRFC.
First What is the purpose of RFC:: ?All types of applications are instructed to communicate with other applications. This communication may take place within an SAP system, with another SAP system, or with an application from a remote external system. An interface that can be used for dealing with this task is the Remote Function Call (RFC). RFCs can be used to start applications in remote systems, and to execute particular functions.
There are 3 types of communications::
Communication within an SAP system or with a remote system can take place using Remote Function Call (RFC). This enables the following scenarios:
·      a) Communication between two independent SAP systems
       b) Communication between a calling SAP system and an external receiving system
       c) Communication between a calling external SAP system and an SAP system as the receiving
            system
Features of the Three Communication TypesTo help you decide which communication types you need to implement according to your system landscape and your requirements, the advantages of the three types of communication are explained below:
... 1)      tRFC
Suitable only for independent function module calls; the sequence of the calls is not preserved
·   2)   qRFC with outbound queue
Function modules in a queue are guaranteed to be processed only once and in sequence (serialization). Also suitable for communication with non-SAP servers.
·   3)     qRFC with inbound queue
The function modules created in the outbound queue are transferred from the outbound queue to the inbound queue; the sequence of the function modules is preserved. An inbound scheduler processes the inbound queues in accordance with the specified resources. Both the client and the server system must be SAP systems. One work process is used for each inbound queue.
http://help.sap.com/saphelp_nw70/helpdata/EN/3b/befa40badbf46fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/555e3c0f51a830e10000000a114084/content.htm
XI point of View...
Basically Once the TRFC or QRFC is funtion is over XI will place the Message into the Adapter engine queues based on the Comminication channel configuration.
Suppose if it is and EO then XI ill place the message in any Queue based on the free and priority and if configuration is done as per EOIO then XI ill place all the messages in the Same queue name so that it ill processes in order one after another and if the above message fails and remaining all other messages will be in the queue and doesnt process untill the failed mesages gets removed
But in case of EO it may be places in any queue and if one message fails then another message of same interface may processed sucessfully based on another queue order.
I hope it wil be helpful to you...
Regards::
Amar Srinivas Eli

SMQ1 & SMQ2 Monitor

Hi Friends,
I know that SMQ2 ia a inbound queue and SMQ1 is a outboud queue but wanted to know where this queues are present exactly and Purpose
I guess SMQ2 is the first step in IE after AE forwards the PI SOAP Message and before the Pipeline steps.
Once Pipeline completes the Call Adapter Step then message goes to Adapter through SMQ1. Please clarify
Regards & Thanks ,
Manikandan

>>when we say outbound (SMQ1) it mean messages are incoming to IE of PI( i.e Sender System->AE->IE)
AFAIK ...the PI XML (from the sender system) message is first placed in the inbound queue after that logical routing and splitting of messages will take place, then the message is placed in the outbound queue (mapping and technical routing will take place) and once all the pipeline steps executed messages from the outbound queue is assigned to the receiver of the message through an adapter(optional)...
XI Asynchronous Message Processing: Understanding XI Queues -Part I
What is the different qRFC outbound and qRFC inbound Queue ?

Role of SMQ1 and SMQ2

Hi,
What is the use of SMQ1 and SMQ2 in the LO.
can some one please elaborate.

Hi,
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
Check it
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Thanks
Reddy

Difference between SMQ1 and RSA7 in CRM system?

We all know that in R3 systems and for LO Cookpit applications, SMQ1 can display outbound queue which usually contains the updated records on R3 systems for LO Cookpit application data and then after scheduled V3 job, these updated records on R3 systems can be moved from the outbound queue (SMQ1) to Delta queue (RSA7) and wait for BW Delta extraction.
However in CRM systems, there should be no such scheduled V3 job, does that mean SMQ1 = RSA7 in CRM systems, or in other words, both T-Codes or the Outbound queue (SMQ1) and the Delta queue (RSA7) show the same updated records and wait for BW extraction?
Anyone's answer is greatly appreciated!

Hi
RSA7 will hold the delta records nothing but delta queue.But in SMQ1 is used to delete the entries(data) in the delta Queue.
Thanks
Ajay

SMQ1 - obsolete qRFC outbound entries

Similar Messages

Maybe you are looking for