SMQ1 outbound queue

Hi Experts,
Could you please let me know the purpose of SMQ1 and SMQ2.
Because when i saw the transaction SMQ1 i am able to see even the queues for
0FI_GL_6
0FI_GL_7
1_CO_PA333ZPAC4.
But when i saw the transaction LBWQ it only contains the Logistics related extract structures.i am aware of LBWQ where the user postings will be saved here with the help of VI Update.
Regards,
Sunil Kumar.B

Hi,
SMQ1 and SMQ2 is used to view the Outbound and Inbound Queue :-
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
You can get more help from following link :-
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Navesh

Similar Messages

Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)

Hi ,
I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
and material from ECC to CRM.
BP and Materials are replicating well.
My Issue is,
while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
status as "SYSFAIL".
QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
Transaction Code SMW01,
BDOC Details:
BDOC State Description: Information no processing.
BDOC Type :BUS_TRANS_MSG.
ERROR Message:
a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
b.Business transaction type ZEQQ does not exist.
c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
Thanks and Regards,
Ravi A

Maintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
User CRM
Object Name SALESDOCUMENT
Destination xxxxxxxxxxxx
Load Type delta download
Queue Name
Queue Name
BAPINAME
INFO
InQueue Flag X
Send XML
CRM Release 700
Logical system xxxxxxxxxxx
this will stop the flow of ecc sales documents to crm
this will also stop Bdcos in SMW01
Please let me know if this helped

Error in SMQ1 outbound queue in SAP CRM

Hi SAP CRM Experts,
When the changes are made to an existing order in SAP CRM and in change mode showing the message as "Document is being distributed-changes are not possible".I have cheked the SMQ1 , there was sysfail with info " The ASSERT condition was violated" and in SMW01 BDOC state as " Sent to receivers (not all have confirmed)".Also in the SAP R/3 , there was a short dump " Assertion-Failed.
What could be the probable reason for this ?
I Would appreciate providing the solution at the earliest.
Best Regards
Succhi

Hi,
The short Dump may help you to find where exactly the error is.
Check in which program are you getting this Dump. Is it sandard or custom?
Also in short dump you will be able to see the part of code where the system throws the error.
this can give a good idea on the issue.
Regards,
PP

SMQ1 - outbound queue with destination NONE

Dear all,
I did the setup for LIS application 13 two days back. I have scheduled the V3 job in LBWE but the job fails with ABAP Dump. I checked in SMQ1 and see that the destination in NONE for this datasource. Please help me.
Thanks and Regards
Adhira Anand

Hi Mti,
I did a init with data transfer and DSO is my first data target.
Please check the below ABAP dump.
What happened?
    The current application program detected a situation wh
    should not occur. Therefore, a termination with a short
    triggered on purpose by the key word MESSAGE (type X).
Error analysis
    Short text of error message:
    Structures have changed (sy-subrc=2)
    Long text of error message:
    Technical information about the message:
    Message class....... "MCEX"
    Number.............. 194
    Variable 1.......... 2
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLMCEX" or "LMCEXU22"
    "MCEX_UPDATE_18"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLMCEX" - in "MCEX_UPDATE_18".
    The main program was "RMCEXUP1 ".
    In the source code you have the termination point in line 156
    of the (Include) program "LMCEXU22".
    The program "SAPLMCEX" was started as a background job.
    Job Name....... "LIS-BW-VB_APPLICATION_18_635"
    Job Initiator.. "SDSDISP"
    Job Number..... 07003800
Thanks and Regards
Adhira Anand

Outbound Queue in ECC with CRM Destination

Dear experts
In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
What are the settings to avoid this outbound queue to be created?
Thanks in advance,
Regards, Stephanie

Hello Stephanie.
Please remove the following table entry in your ECC system:
TBE31 (Application components by Publish & Subscribe interface)
- The following entries must exist for a successful data exchange:
                 Event            00501014
                 Obj.class        BUSPROCESSND
                 Fmodule          CRS_SALES_COLLECT_DATA
   Also see Note 490932.
Best regards,
Maggie

Outbound queue in NOSEND status

Dear All
We are doing integration between CRM2007 and lotus domino server (6.5)
And we have done installation of groupware connector (2.1) and proxy (Default) and replicated all the customizing objects successfully and we are using ABAP_MAPBOX.
So, when we try to synchronization of BPu2019s between CRMàGW, we are getting errors.
WE Can see in trnx SMQ1 (outbound queue monitor) ISP_O* queues with NOSEND status.
When, we verified that there is a lock in the Connector... Error code is 9 (Unspecific error
most probable reasons) with user name (ADDRESS_BOOK, GWA_01) but USERLIST.xml contains replicated BPs address and even we checked the Trace log which specifying that, "Unspecified error: Corresponding proxy for gw server is not found: xyzserver-dhq/xyz".
Regards
Subbaraju

Subbaraju,
We too are running CRM2007 with LotusNotes/Domino 6.5.
The ISP_O* items you see in NOESEND will remain in the outbound queue until the groupware adapater (GWA) picks them up, your problem is with the GWA itself.
To see if these are, in fact, your outgoing partner records - check the ownership of the ISP queue: SE16 table = ISPQTAB
I recommend installing the connector and the default proxy on the same server, but it sounds like your proxy has stopped functioning. If you startup the Lotus Domino Connector, the monitor, you should see a red light on the proxy status. Make sure you applied the latest Groupware Connector Patch from SWDC - SAPGRPWCN14_0-10002067.ZIP.
I also recommend sticking to the precise versions of required software:
SUN JDK or JRE 1.4.2 or higher
Sun Java Mail (sap recommends 1.3.1)
Java RunTime 1.4.2
JavaBeans(TM) Activation Framework 1.0.2
Hope this helps.
- Brian.

Deleting an outbound queue SMQ1

HI,
Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
Kind regards,
Mike

Hello Mike,
This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
Apart from that , no issues

Deleting Outbound Queues in SMQ1

Dear Experts,
System landscape: ECC 6.0, SRM 5.0
I started intial load using DNL_CUST_PROD1 in R3AS and my outbound queue in SMQ1 (ECC) contained an SYSFAIL status. So I would like restart the initial load again from SRM.
Can you please let me know if I need to delete this outbound queue or resetting the status to READY is enough.
If I need to delete the queue, can you please let me know how to delete this outbound queue.
Points will be rewarded.
Thanks in advance,
Bob.

Hi Bob,
I'm not sure if I completely understand your question.
You can delete the outbound queue and start the initial load again. In order to do so, just select the queue (click on it once) and then select the trash can icon on the top left side. Or else you can just right click on the queue and select the "Delete" option.
Hope this helps!
Thanks,
Aravind

Delete Outbound Queue : SMQ1

Dear Friends
I am upgrading my ECC6 PRD Server by EHP5.
My Check Roadmap step has been completed with warnings!
I Knew it to release and delete by the LBWE and LBWQ.
But my question is that i need to delete it now in CHECK and PREPROCESSING phase.
or
Delete it in the DOWNTIME phase ! becuase, the PRD system in integrated with BI PRD server and the data is collecting each hourly.
Please advise.
A2EEMCEX 151 Entries for application "11" still exist in the extraction queue ->
Long text:
    Cause
      Changing extraction structure &V#& for application &V#& is forbidden,
      because there are entries that have not yet been processed into an
      extraction queue for application &V#& for at least one client.
      If an extraction structure is changed to the entries that are still
      open in an extraction queue, then these are no longer able to be read
      and can cause terminations with the collective update.
    What to do
      Start the collective update using the function "Job Control" in the
      <DS:TRAN.LBWE>Logistics Extraction Structures Customizing Cockpit</>.
      To get an overview of the logistics extraction queues, see the
      <DS:TRAN.LBWQ>Logistics Queue Overview</>.

Dear Anwer,
As long as you are in prepare or uptime of the upgrade you can
ignore the errors in the RSVBCHCK which say that there exist
update records (as it is normal that there are update records
in a system which is productively used).
In the downtime there is also a check on update records. In the downtime
this check cannot be ignored.
You can also read note 328181.
Please also refer to the upgrade guide with this regard.
SAP Enhancement Package 4 for SAP ERP 6.0 ABAP:
page 105********************************************************
Outstanding or Incomplete Updates (Phase JOB_RSVBCHCK2)
If there are any outstanding or incomplete updates, the upgrade stops in
this phase with a message.
If errors occur in this phase and you have not stopped production
operation yet, you can skip these
errors with ignore without entering a password. However, we recommend
that you check for these updates and clean them up. The message is:
Update records still exist - Please process
page 103*******************************************************
Update records still exist - please process
Make sure that you have cleaned up all outstanding updates.
Make sure that you have cleaned up all outbound queue RFC calls by the
JOB_RSVBCHCK_R or JOB_RSVBCHCK_D phase (during downtime) at the latest.
If you are still in the preparation phase (before the beginning of the
Preprocessing roadmap step) and therefore in production operation, you
must only delete the terminated updates.
Also during the production downtime for such issues you can check the
following information:
This error is caused because the updates have been deleted but
entries in tables related to the update process are not empty:
- tables VBDATA,VBMOD and VBHDR should all be empty
To avoid the error message , run report RSM13002 with "delete" option
to delete update records as explained in attached note 67014. After
that you can repeat the phase, the incidence should have been solved.
-> 67014 - Reorganizing update requests
Information remains same for EHP5 as well.
Regards,
Abhishek

CRM 5.0 outbound queues to Mobile sales

Hi all,
We have upgraded from CRM 3.0 to CRM 5.0.
I am looking at the outbound queues in SMQ1 that are bound to Mobile sales Sites and am not finding any data bundles other than the name of the Replication Object name in the LUW's of these queues.
But in CRM 3.0 I am able to see detailed data bundles for any of the queues.
Does this mean no data is actually being passed from CRM to Mobile Sales.
At this point of time I dont have my commstation up and running to verify this. So I am curious to know how else can I check this?
Thanks.

Hi KP,
This is the default behaviour in 5.0...the queues are fine and you can go ahead with the sync using Conntrans.
Regards,
Ankan

Outbound Queues in CRM system

Dear All,
There are lot of outbound queues in our CRM production sytem which are older than one month,basis is asking wether we can
delete those queues or not,request you all to help me wehter we can delete it or not.if anybody can put some light on how the
queues are getting there then it will really helps..
Thanks,
Sapta

Check in SMQ1 transaction. You can see whether you require them meant for any active extractors running delta or running in regular frequency for your loads.

Gerneric Datasources and Outbound Queue

Dear Experts,
I've got some generic Datasources (Delta and Full Update) that work properly with productive BW-System.
Now I'm starting to build up an developement system (wrong order I know) and want to load data using the mentioned Datasources from time to time to get relevant data for testing.
Problem now is, that the generic delta Datasources fail accourding to doublicate keys (loading to dev-system) although in the basic tables for these datasources no doublicate keys are existing (or even are possible due to the table key).
I realized in smq1, that every time when data is transfered to productive BW-System, the counter to the queue for dev-System is incremented. When I delete all the entries in smq1 all the updates for dev-System work fine.
In one of the threads here I read, that generic Datasources do not have outbound queues. (Re: Generic Data Source issue).
So is there any way to turn of the outbound queues for specific (generic) Datasources? I do not want to turn them of in general as we use standard delta Datasources for Controlling.
Or how is the "normal" way to transfer data to a dev-System?
(One more information: productive system is 3.5; dev-system is 7.1.)
Thank you in advance
Kind regards
Philip
Edited by: Philip Munz on Nov 17, 2009 8:50 AM

ok,
after some days of searching and reading I now understand my problem.
For all, who face the same problems in understanding delta-updates, qrfc, rsa7 and so on, please have a look at
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID0216771750DB11245246034303112354End?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&overridelayout=true
again thanks for the help
kind regards
Philip

Outbound Queue stacking up for old destination

Hi Gurus,
I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
thanks for the help!

Hi Anand,
Please go to SMQ1 and in qname enter cf* and then execute.
In the error screen press F8 and then select all PPM related queues and delete.
After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
Manish

Significance of Inboun and Outbound queue in sales order replication

Hi CRM Leads,
What is the significance of Inbound Queue and Outbound queue in saleas order replication from CRM to ECC.
What exactly happens in Outbound Queue and Inbound Queue.
Thanks,
Sandeep
What

Inbound - Tcode: SMQ2 : Inbound in the context of CRM and this queue shows the business transaction, master data and configuration data that are coming from ECC into CRM .
Naming Convention for Queues
The names of queues for data transfers from an ERP back end to the CRM server are made up as follows:
R3A (from ERP back end to CRM)
    I for the initial data transfer / for Data Synchronization
    D for the delta data transfer
    U for loading to the ERP back end
    R for Defining Requests
    <Object> Name or part of object name, or the name of the higher-level independent object
    <Key> Only delta queues are subdivided by keys
Outbound - Tcode SMQ1 - Outbound in the context of CRM and this queue shows the transactions and data that are going from CRM to ECC
See more on [Using CRM Queues|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2d9d9707361903e10000000a42189c/content.htm] following the link.
Read the [CRM Adapter Framework|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2e33a2a6c51d24e10000000a421937/content.htm] for advanced learning.

Urgent help- How to open Outbound queues

Hi,
I am new to SCM-APO, we have SCM 5.0 having CIF to R/3 4.7 Enterprise.
In SMQ1 i can see lot of outbound queues present with status NOSEND in R/3.
I want to push these queue manually how shoild i do it
Please guide me as i m new to this area.
Thanks
Amit

Hi Amit,
Go to Transaction /n/sapapo/ccr i.e.CIF Comparision/Reconcillation of Transaction Data. then Click on
Execute Comparision/Reconcillation Tab. Then Enter Parter System i.e ECC,then Proudct & Location.then Select Document to be checked like Production Order i.e Mfg Ordrs(with Reqs/Receipt , with Opernations),Planned Order,Purchase order etc. which you want to Transfer in ECC concern to the Product.Then Execute the Transaction.
You will find Transaction data & result Documnet.Open the Transaction Data i.e Mfg Orders or Planned Orders.Then double click on Requirements/Receipts or Operations.You will find the objects in right hand side.Select all the objects & push in to R/3 with Push button R/3.
Hope so it will help you to solve your problem.
Regards
Sujay

SMQ1 outbound queue

Similar Messages

Maybe you are looking for