SMQ1 queues are in stop state

Hi All,
My outbound queues from ECC to CRM system are in Stop state, I checked under qRFC monitor (SMQS) , queue is registered.
When i go to SMQ1 and click on unlock the queues works but when the next entry gets stuck again.
Any ideas to fix this.
Thnx
Addi

Dear Addi,
Please check your RFC settings - and the logical systems defined.
Secondly, check the Inbound (SMQ2) and Outbound (SMQ1) queues on both systems, that will help you trace the reason of the error. Check Tx. SMW02 to trace BDocs messages if any.
If middleware was working fine earlier then most probably RFC settings have been altered.
Regards.

Similar Messages

SMQ2 - Found a queue with name "*" and all other queues stuck in STOP state

Hi all,
We have a problem on the ECC side, on outbound asynchronous proxies. Sometimes a new queue appears on SMQ2 there with name "", and with status "STOP". At this time, all other queues stuck with STOP status... the only way of resetting all those queues to RUNNING state again is to delete the queue named as ""...
Some of you has any idea how this queue "*" appears there and stop all other queues?
thanks
roberti

Hi Ravi,
Is not only about one queue stopped... the problem is this queue named ""... with status STOP, all other queues stops too with it. The only way to make things work again is to delete the queue named as ""... the problem is to discover what or who is creating this stupid "*" queue. I think that this is a procedural error on datacenter, but they are saying is not the case... I'm investigating, but if someone else has any idea about I would appreciate
thanks!
roberti

Messages are in Scheduled State

Hi
some of my messages are in scheduled state. i verified SMQ1,SMQ2 . no queues are in block state. also i executed register queues in sxmb-adm still they are same state. how can i make them as successful state. only by restarting the messages or is there any other way? also tell me why these messages went to scheduled state

Reddy,
Can you please check this threads for possible solutions:
Problem with scheduled message in SXMB_MONI
SXMB_MONI - Message scheduled on outbound side (no queues)
Regards,
---Satish

Billing Document queues are stuck in CRM Outbound

Hi All,
In our system there are huge number of CSA_BEACRMB_BD* Queues generating in CRM Outbound (SMQ1) and getting into "Ready" state with RFC destination as "NONE". These queues are of no use. Please guide me how to stop generating this Queues. FM used for this queues is /1BEA/CRMB_BD_MWC_O_VALIDATE.
Regards,
Das

Hello,
I would check the customizing in SPRO. It seems that your System is customized to distribute billing numbers.
My guess is
Customer Relationship Management
Billing
Country-Specific Functions
Official Document Numbering
Transfer Official Document Numbers to Accounting Documents
Check whether there is an entry somewhere there forcing the System to behave the way it does.
Lutz

BUPA_REL bdocs are in E04 state

Hi all,
Bdocs are failed with error text "Function G1 does not exist". and information error is "No extension entered" .Details are as follows
Bdoc type : BUPA_REL
State : E04
Queue name : R3AD_CUSTOME0004700005
checked SMQ1/SMQ2 transactions, no queues are there.
Help me how to clear those bdocs.
Thanks & Regards,
P.V

Hi,
Check if another Bdoc BUPA_MAIN is in green.
If not, then request download the BUPA_MAIN for the customer first and then BUPA_REL.

The STOP statement was used outside a report flow.

Hi Gurus,
when i am executing this program it is going to short dump.
pls help me out.
thanks in advance.
Runtime Errors         STOP_NO_REPORT
Date and Time          06.10.2008 12:10:06
Short text
The STOP statement was used outside a report flow.
What happened?
Error in the ABAP Application Program
The current ABAP program "YMRP0003" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The STOP statement is only useful in specific events of the report
processing (that is, the execution of a type 1 program). In this case,
there was no report flow, so the statement could not be executed.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
System environment
SAP-Release 700
Application server... "ciRDE"
Network address...... "10.131.28.7"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "hpx190"
Database type..... "ORACLE"
Database name..... "RDE"
Database user ID.. "SAPDAT"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 21 2008 20:48:34"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 157
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 65536
MM Used. 3492016
MM Free. 695200
User and Transaction
Client.............. 050
User................ "MBAGGALA"
Language key........ "E"
Transaction......... "CC31 "
Transactions ID..... "48E9EB60C2944602E10000000A831C07"
Program............. "YMRP0003"
Screen.............. "SAPMC29C 0020"
Screen line......... 22
Information on where terminated
Termination occurred in the ABAP program "YMRP0003" - in "SCM-MRP-FSE-12_02".
The main program was "SAPMC29C ".
In the source code you have the termination point in line 138
of the (Include) program "YMRP0003".
Source Code Extract
Line
SourceCde
108
109
110
*This function module read the status of an object
111
112
CALL FUNCTION 'STATUS_TEXT_EDIT'
113
EXPORTING
114
client           = sy-mandt
115
flg_user_stat    = lc_flagx
116
objnr            = ls_ecm_data-objnr
117
only_active      = lc_flagx
118
spras            = sy-langu
119
IMPORTING
120
line             = lf_sttxt
121
user_line        = lf_asttx
122
EXCEPTIONS
123
object_not_found = 1
124
OTHERS           = 2.
125
126
CHECK NOT sy-tcode EQ 'CC32'.
127
*-- Begin of Changes made by DGupta1 on 07/12/2006--
128
Changes are made to update the Change Number Dates While Calling CC32
129
from custom transaction YC06 only
130
CHECK NOT sw_yc06 EQ 'X'.
131
*-- End of Changes made by DGupta1 on 07/12/2006--
132
133
CHECK NOT lf_sttxt CS 'ECCM' AND NOT lf_sttxt CS 'ECOR'.
134
135
136
IF ls_ecm_data-datuv NE lc_maxdate.
137
MESSAGE s011.
>>>>>
   STOP.
139
ENDIF.
140
141
142
IF lf_lastd < lf_artwd.
143
MESSAGE s012.
144
STOP.
145
ENDIF.
146
147
IF ls_ecm_data-lvorm = lc_flagx.
148
MESSAGE s013.
149
STOP.
150
ENDIF.
151
152
WRITE: lf_lastd TO lf_lastd_string.
153
WRITE: lf_artwd TO lf_artwd_string.
154
155
156
IF ls_ecm_data-ccart NE lc_fixd.
157
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
1
SY-FDPOS
40
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ARC0H
SY-UCOMM
FCBU
SY-TITLE
Create ECR: Object Types
SY-MSGTY
S
SY-MSGID
YMRP
SY-MSGNO
011
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20081006
SY-UZEIT
121006
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
7 FORM         YMRP0003                            YMRP0003                              138
SCM-MRP-FSE-12_02
6 FUNCTION     SAPLXCCA                            ZXCCAU05                               39
EXIT_SAPMC29C_005
5 FORM         SAPMC29C                            MC29CFS1_SAVE_USER_EXIT                36
SAVE_USER_EXIT
4 FORM         SAPMC29C                            MC29CFF2_FCODE_FCBU_EXECUTE            88
FCODE_FCBU_EXECUTE
3 FORM         SAPMC29C                            MC29CFO1_OKCODE_CHECK                 252
OKCODE_CHECK
2 MODULE (PAI) SAPMC29C                            MC29CI10_OKCODE                        12
OKCODE
1 MODULE (PAI) SAPMC29C                            MC29CI10_DYNPRO_CALL                   11
DYNPRO_CALL
Chosen variables
Name
Val.
No.       7 Ty.          FORM
Name SCM-MRP-FSE-12_02
SY-REPID
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
SY-TCODE
CC31
00000000000000000000
00000000000000000000
44332222222222222222
33310000000000000000
SW_YC06
0
0
2
0
LF_STTXT
CRTD
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
4554222222222222222222222222222222222222
3244000000000000000000000000000000000000
SYST-REPID
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
LS_ECM_DATA-DATUV
20081006
00000000
00000000
33333333
20081006
LC_MAXDATE
29991231
00000000
00000000
33333333
29991231
%_PRINT
000                                                                                0###
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGID
YMRP
00000000000000000000
00000000000000000000
54552222222222222222
9D200000000000000000
LC_FLAGX
X
0
0
5
8
SPACE
0
0
2
0
SY-MSGNO
011
000
000
333
011
LC_ITEM
EUR_SCM-PUR-FSE-12_02
000000000000000000000
000000000000000000000
455554425552454233533
552F33DD052D635D12F02
SY-MSGV1
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV2
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV3
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV4
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
LF_LASTD
00000000
00000000
00000000
33333333
00000000
LF_ARTWD
00000000
00000000
00000000
33333333
00000000
SY-SUBRC
0
0000
0000
No.       6 Ty.          FUNCTION
Name EXIT_SAPMC29C_005
ECM_ALT_DATE
Table IT_665[0x202]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_ALT_DATE
Table reference: 113
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 000000710000029900000000000000CAFFFFFFFF
TABH+ 40(16) = 040000DB000006200010249401800000
store        = 0x0000000000000000
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 113   (0x00000071)
label        = 665   (0x00000299)
fill         = 0     (0x00000000)
leng         = 202   (0x000000CA)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000018
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
shmTabhSet   = Not allocated
id           = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
shmVersId    = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
ECM_DATA
050            01001020081006            00000000            00000000            dsfasdddffSS
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3332222222222223333333333333322222222222233333333222222222222333333332222222222226766766666552
0500000000000000100102008100600000000000000000000000000000000000000000000000000004361344466330
ECM_EFFECTIVITY
Table IT_666[0x464]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_EFFECTIVITY
Table reference: 126
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000007E0000029A00000000000001D0FFFFFFFF
TABH+ 40(16) = 040000DB000006800010249401800000
store        = 0x0000000000000000
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 126   (0x0000007E)
label        = 666   (0x0000029A)
fill         = 0     (0x00000000)
leng         = 464   (0x000001D0)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000020
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
shmTabhSet   = Not allocated
id           = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
shmVersId    = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
ECM_HIERARCHY
Table IT_667[0x120]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_HIERARCHY
Table reference: 110
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000006E0000029B0000000000000078FFFFFFFF
TABH+ 40(16) = 040000DB000006B00010249401800000
store        = 0x0000000000000000
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 110   (0x0000006E)
label        = 667   (0x0000029B)
fill         = 0     (0x00000000)
leng         = 120   (0x00000078)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000021
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
shmTabhSet   = Not allocated
id           = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
shmVersId    = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
ECM_MNT_VALUE
0000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222223333333333333333222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ECM_OBJMNGREC
Table IT_668[0x600]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_OBJMNGREC
Table reference: 107
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000006B0000029C0000000000000258FFFFFFFF
TABH+ 40(16) = 040000DB000005C0001024C401800000
store        = 0x0000000000000000
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 107   (0x0000006B)
label        = 668   (0x0000029C)
fill         = 0     (0x00000000)
leng         = 600   (0x00000258)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000016
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
shmTabhSet   = Not allocated
id           = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
shmVersId    = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
ECM_OBJ_TYPE
Table IT_669[28x192]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_OBJ_TYPE
Table reference: 116
TABH+ 0(20) = C0000009448BF3E0000000000000000000000000
TABH+ 20(20) = 000000740000029D0000001C000000C0FFFFFFFF
TABH+ 40(16) = 040000DB000005600010249421800000
store        = 0xC0000009448BF3E0
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 116   (0x00000074)
label        = 669   (0x0000029D)
fill         = 28    (0x0000001C)
leng         = 192   (0x000000C0)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000014
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0xC0000009448B8270
pgHook       = 0xC0000009448BF440
idxPtr       = 0x0000000000000000
shmTabhSet   = 0x0000000000000000
id           = 195   (0x000000C3)
refCount     = 1     (0x00000001)
tstRefCount = 0     (0x00000000)
lineAdmin    = 48    (0x00000030)
lineAlloc    = 48    (0x00000030)
shmVersId    = 0     (0x00000000)
shmRefCount = 2     (0x00000002)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
TRANS_TYP
H
0
0
4
8
D_ASTTX
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
SY-REPID
SAPLXCCA
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454544422222222222222222222222222222222
310C833100000000000000000000000000000000
L_ITEM
EUR_SCM-MRP-FSE-12_02
000000000000000000000000000000
000000000000000000000000000000
455554424552454233533222222222
552F33DDD20D635D12F02000000000
LI_YBS00001
050EUR_SCM-MRP-FSE-12_02         YMRP0003                                SCM-MRP-FSE-12_02
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3334555544245524542335332222222225455333322222222222222222222222222222222544245524542335332222
050552F33DDD20D635D12F020000000009D2000030000000000000000000000000000000033DDD20D635D12F020000
SY-SUBRC
0
0000
0000
SYST
#######################(###############Z################################################XC####
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E000100
0000000000000000000000020000000000000005000000000100000000000000000000000000010900000001540000
0000000100000A0000000108010001000000000A0000000000000000000000000000000000000B000008000083000C
LI_YBS00001-REPORT
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
LI_YBS00001-FORM
SCM-MRP-FSE-12_02
000000000000000000000000000000
000000000000000000000000000000
544245524542335332222222222222
33DDD20D635D12F020000000000000
LS_YBS00001
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LS_YBS00001-ENABLED
0
0
2
0
LS_YBS00001-REPORT
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
LS_YBS00001-FORM
000000000000000000000000000000
000000000000000000000000000000
222222222222222222222222222222
000000000000000000000000000000
SYST-REPID
SAPLXCCA
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454544422222222222222222222222222222222
310C833100000000000000000000000000000000
No.       5 Ty.          FORM
Name SAVE_USER_EXIT
RET_CODE
0
0000
0000
SY-SUBRC
0
0000
0000
SY-MSGID
YMRP
00000000000000000000
00000000000000000000
54552222222222222222
9D200000000000000000
DARSTAB[]
Table[initial]
AEDTB[]
Table IT_650[0x202]
\PROGRAM=SAPMC29C\DATA=AEDTB[]
Table reference: 129
TABH+ 0(20) = 0000000000000000C000000944A25D7000000000
TABH+ 20(20) = 000000810000028A00000000000000CAFFFFFFFF
TABH+ 40(16) = 0400000000000EF00010249401800000
store        = 0x0000000000000000
ext1         = 0xC000000944A25D70
shmId        = 0     (0x00000000)
id           = 129   (0x00000081)
label        = 650   (0x0000028A)
fill         = 0     (0x00000000)
leng         = 202   (0x000000CA)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000065
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
shmTabhSet   = Not allocated
id           = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
shmVersId    = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x0000000000000000
collHook     = 0x0000000000000000
ext2         = 0xC000000944AFAD80
>>>>> 2nd level extension part <<<<<
tabhBack     = 0xC000000944A23AF0
delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x0000000000000000
pb_handle    = 0x0000000000000000
CC07
000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000
222222222222222222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000000000000000000
AENRB
050            01001020081006            00000000            00000000            dsfasdddffSS
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3332222222222223333333333333322222222222233333333222222222222333333332222222222226766766666552
0500000000000000100102008100600000000000000000000000000000000000000000000000000004361344466330
DARSTAB
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
22222222222222222222222222222222222222222200
00000000000000000000000000000000000000000000
AEEFB[]
Table IT_651[0x464]
\PROGRAM=SAPMC29C\DATA=AEEFB[]
Table reference: 105
TABH+ 0(20) = 0000000000000000C000000944AFADF000000000
TABH+ 20(20) = 000000690000028B00000000000001D0FFFFFFFF
TABH+ 40(16) = 0400000000000F500010249401800000
store        = 0x0000000000000000
ext1         = 0xC000000944AFADF0
shmId        = 0     (0x00000000)
id           = 105   (0x00000069)
label        = 651   (0x0000028B)
fill         = 0     (0x00000000)
leng         = 464   (0x000001D0)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000067
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
shmTabhSet   = Not allocated
id           = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
shmVersId    = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x0000000000000000
collHook     = 0x0000000000000000
ext2         = 0xC0000009448F3220
>>>>> 2nd level extension part <<<<<
tabhBack     = 0xC00000094482B060
delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x0000000000000000
pb_handle    = 0x0000000000000000
DCTAB[]
Table IT_35[7x16]
\PROGRAM=SAPMC29C\DATA=DCTAB[]
Table reference: 25
TABH+ 0(20) = C000000944921280000000000000000000000000
TABH+ 20(20) = 00000019000000230000000700000010FFFFFFFF
TABH+ 40(16) = 0400000000001BB00010249401800000
store        = 0xC000000944921280
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 25    (0x00000019)
label        = 35    (0x00000023)
fill         = 7     (0x00000007)
leng         = 16    (0x00000010)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000133
occu         = 16    (0x00000010)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)

Dear Rajesh!
Please advise me, what have you done to resolve your problem!!??
I get next problem when i try to start some transaction:
Short text
Syntax error in program "SAPLPA_PACKAGE_SERVICES ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSFW_COMMON" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLPA_PACKAGE_SERVICES " in
     include "LPA_PACKAGE_SERVICES$25 " in
    line 13:
"The type "TPCHK_FROZEN_OBJECTS_H" is unknown."
The include has been created and last changed by:
    Created by: "SAP "
Last changed by: "SAP "
    Error in the ABAP Application Program
The current ABAP program "SAPLSFW_COMMON" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLPA_PACKAGE_SERVICES :
    "The type "TPCHK_FROZEN_OBJECTS_H" is unknown."
Trigger Location of Runtime Error
    Program                                 SAPLSFW_COMMON
    Include                                 LSFW_COMMONU01
    Row                                     117
    Module type                             (FUNCTION)
    Module Name                             SFW_GET_SWITCHPOS
Source Code Extract
Line
SourceCde
87
     IF sy-subrc = 0.
   88
       <fs_switchpos>-switch_id = devc_resultline-switch_id .
   89
       <fs_switchpos>-state      = devc_resultline-state .
   90
       <fs_switchpos>-text       = devc_resultline-text .
   91
                                                                                92
       INSERT <fs_switchpos> INTO TABLE resulttab. "Ergebnis merken
   93
       CONTINUE.
94
     ENDIF.
95
                                                                                96
                                                                                97
     READ TABLE gt_sfw_package INTO wa_sfw_package WITH TABLE KEY
   98
                    devclass = lf_devclass
   99
                    version = 'A' .
100
                                                                                101
     IF sy-subrc = 0. "Objekt ist in einem Paket mit Schalter
102
       <fs_switchpos>-switch_id = wa_sfw_package-switch_id .
103
                                                                                104
     ELSE. "gucken, ob es sich um geschachtelte Pakete handelt
105
                                                                                106
       DO 20 TIMES.
107
                                                                                108
         CLEAR wa_superpackage .
109
                                                                                110
         READ TABLE gt_superpackage INTO wa_superpackage WITH TABLE KEY
111
                         devclass = lf_devclass.
112
                                                                                113
         IF sy-subrc = 0 .
114
           lf_superpackage = wa_superpackage-parentcl.
115
         ELSE.
116
                                                                                >>>>>
           CALL FUNCTION 'PA_GET_SUPER_PACKAGE_NAME'
118
             EXPORTING
119
               i_package_name       = lf_devclass
120
               i_direct_select      = 'X'
121
             IMPORTING
122
               e_super_package_name = lf_superpackage.
123
                                                                                124
                                                                                125
           wa_superpackage-devclass = lf_devclass .
126
           wa_superpackage-parentcl = lf_superpackage .
127
           INSERT wa_superpackage INTO TABLE gt_superpackage .
128
                                                                                129
         ENDIF.
130
                                                                                131
         IF lf_superpackage = space .
132
           <fs_switchpos>-state     = space .
133
           <fs_switchpos>-switch_id = space .
134
           EXIT. "Enstation !
135
         ELSE .
136

Scheduled jobs are in released state only

Dear Experts,
we shedule jobs in background periodically. But for a particular time, all scheduled jobs are in released state only. Please suggest what might be the issue. Even some SAP std jobs have have not started.

Hi Raghavendra,
Have you checked enough BTC work process available in your SAP system.
Use SM65 transaction,goto =>Additional Tests ;check mark "Determine work process status" and "Determine no of jobs in queue"
and see the test results for any problems.
Best Regards,
Shyam Dontamsetty

Windows Services set to Automatic in stopped state

Hi All,
On windows 2008r2 sp1 most of the services in stopped state after the reboot even that is set to automatic. if i try to start i'm getting a error message stating that "service did not start in timely fashion". I booted the computer in safe and
i tried starting the service it didnt worked out. In msconfig except microsft related services i disabled all the third party services and i tried the microsft related services like RDS, BITS..etc still same issue persists. Could someone please
guide me how to get rid of this issue.

Hi,
Did you checked the event log? Base on my experience ,
a number of service stopped often cause by some system file corrupted, please try to run the sfc /scannnow command for the check.
To run the System File Checker tool, follow these steps:
1. Click Start Collapse this imageExpand this image , and then type cmd in the Start Search box.
2. Right-click cmd in the Programs list, and then click Run as administrator. Collapse this imageExpand this image If you are prompted for an administrator password or confirmation,
type your password or click Continue
3. At the command prompt, the following line, and then press ENTER:
sfc /scannow
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Reg:Outbound Queues are strucked in CRM

Hi All,
After Extracting Data from CRM source system,the rercords are still displaying in the outbound queues of the CRM Source system.what might be the issue?In outbound queues the status is NOSEND or is it maintaining one more copy of the records.what happens manually if the queues are deleted.if any queues are deleted the posting to BI is stopped.If any data is missed by deleting the queues ,shall we recover the data back.what are the steps to schedule the those jobs in BI.
Thanks & Regards,
MD.Kalim.

Hello,
I would check the customizing in SPRO. It seems that your System is customized to distribute billing numbers.
My guess is
Customer Relationship Management
Billing
Country-Specific Functions
Official Document Numbering
Transfer Official Document Numbers to Accounting Documents
Check whether there is an entry somewhere there forcing the System to behave the way it does.
Lutz

[Urgent] Queues are blocked in status SYSFAIL

Hi experts,
I have the following problem that arose unexpectedly in an XI 3.0 installation:
Queues are blocked in SYSFAIL status and when I click on one entry, I get message: XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue stopped
It seems to me that J2EE stack cannot connect to ABAP stack.
When I test INTEGRATION_DIRECTORY_HMI connection in sm59, I get no reply..
I cannot logon to Visual Administrator. It stops at 99%.
Hardly can I connect to Integration Builder.
Any ideas.
I need your help ASAP.
Evaggelos

Hi Evaggelos,
>I cannot logon to Visual Administrator. It stops at 99%.
Is your XI installation over?
We had a similar problem in one of my earlier projects. We restarted the server and everything started working fine.
If it is possible you can try the same.
Regards,
Sumit

When Broker Restarts None of the Temporary Queues Are Created

Somehow when the broker restarts none of the temporary queues are getting recreated. The queues were created successfully the 1st time and the applications were happily exchanging messages. Things just fall apart when the broker restarts.
I'm able to reproduce this problem consistently by doing the following:
1. Start imqbrokerd (mq start)
2. Start client application
3. Shutdown imbrokerd (mq stop)
4. Start imqbrokerd (mq start)
After the producers in the client application have reconnected the following messages are displayed in the console. I'm only able to get the client app to work again is if I restart the client apps.
[02/Mar/2009:23:01:01 CST] attempting to set Message Bytes Limit to 10485760K for destination temporary_destination://queue/192.168.20.14/49823/1 [Queue]
[02/Mar/2009:23:01:01 CST] attempting to set Message Size Limit to 10240K for destination temporary_destination://queue/192.168.20.14/49823/1 [Queue]
[02/Mar/2009:23:01:01 CST] [B1065]: Accepting: [email protected]:57123->jms:37646. Count: service=9 broker=9
[02/Mar/2009:23:01:01 CST] [B2083]: Unable to create destination temporary_destination://queue/192.168.20.14/49823/1 [Queue], autocreation is forbidden
Do you guys have any idea on what's going on? Does anybody know of an existing workaround?
Environment:
- OpenMQ 4.3
- CentOS 5.2
- Sun JDK 1.6_05
- Spring 2.5.5
- Camel 1.3.0
I also looked at the code and found only one location where the error message is used. I still need to figure our how I can get the conditional expression to evaluate to false.
share/java/com/sun/messaging/jmq/jmsserver/core/Destination.java
1395 if (!DestType.isAdmin(type) && !canAutoCreate(DestType.isQueue(type),type) && !BrokerMonitor.isInternal(destination)) {
1396 throw new BrokerException(
1397 Globals.getBrokerResources().getKString(
1398 BrokerResources.W_DST_NO_AUTOCREATE,
1399 getName()),
1400 BrokerResources.W_DST_NO_AUTOCREATE,
1401 (Throwable) null,
1402 Status.FORBIDDEN);
-bash-3.2$ /tmp/openmq-4.3/mq/bin/imqcmd query bkr -t q -n MYQUEUE -u admin
Password: admin
Querying the broker specified by:
Host Primary Port
localhost 7676
Version 4.3
Instance Name imqbroker
Broker ID
Primary Port 7676
Broker is Embedded false
Instance Configuration/Data Root Directory /tmp/openmq-4.3-data/var/mq
Current Number of Messages in System 202
Current Total Message Bytes in System 317483
Current Number of Messages in Dead Message Queue 201
Current Total Message Bytes in Dead Message Queue 316444
Log Dead Messages true
Truncate Message Body in Dead Message Queue false
Max Number of Messages in System unlimited (-1)
Max Total Message Bytes in System unlimited (-1)
Max Message Size 70m
Auto Create Queues true
Auto Create Topics true
Auto Created Queue Max Number of Active Consumers unlimited (-1)
Auto Created Queue Max Number of Backup Consumers 0
Cluster ID
Cluster is Highly Available false
Cluster Broker List (active) mq://192.168.1.123:7676/
Cluster Broker List (configured)
Cluster Master Broker
Cluster URL
Log Level DEBUG
Log Rollover Interval (seconds) 604800
Log Rollover Size (bytes) 268435456
Successfully queried the broker.
I also tried versions 4.4 and 4.2 and received the same behavior :(

The application is inside an app server but we're not using a resource adapter as we're using Spring and Camel to hide the JMS details. Spring (JMSComponent) manages the connection directly. (We current don't have any JMS connection pooling as well.)
<bean id="jmsTransactionManager" class="org.springframework.jms.connection.JmsTransactionManager">
<property name="connectionFactory" ref="jmsConnectionFactory" />
</bean>
<bean id="jmsConnectionFactory" class="com.norvax.framework.jms.OpenMQConnectionFactory">
<property name="openmqBrokerConfiguration">
<props>
<prop key="imqBrokerHostName">$remoting{openmq.hostName}</prop>
<prop key="imqBrokerHostPort">$remoting{openmq.hostPort}</prop>
<prop key="imqReconnect">true</prop>
</props>
</property>
</bean>
<bean id="jms" class="org.apache.camel.component.jms.JmsComponent">
<property name="connectionFactory" ref="jmsConnectionFactory" />
</bean>
I'm going to write a very basic producer using Spring without using Camel and see if I'll get the same behavior. I'd like to see if the way Camel uses JMS is what's making OpenMQ broker to deny creation of temporary queues.
Thanks,
Jeff

Service Application Remains in Stopping State Between Reboots

These SharePoint service applications are a real pain!
I'm trying to stop a service application, but it remains in a hung "stopping" state (even between reboots!). I've also tried to delete the service application from powershell using "Remove-SPServiceApplication $spapp". But it doesn't
work. Additionally, this service application is associated with a SQL database that no longer exists. Is there a best practice for how to address this?
Please help.
Dave

Hi Dave,
Please provide more information about the issue service application.
You could try executing the following command to unprovision the service:
Get-SPServiceInstance
$srvc = Get-SPServiceInstance "GUID"
$srvc.Unprovision()
More information:
http://sharepoint.stackexchange.com/questions/16146/deleted-service-application-service-instances-remain
Regards,
Rebecca Tu
TechNet Community Support

VM got stuck in "stopping" state, and cannot be stopped

Dear all,
I am using Oracle VM 3.2.2.
One of my VM got stuck in "stopping" state, and cannot be stopped.
How can I troubleshoot this problem...

Q: Is the VM still running, i.e. can you ssh to the VM?
Q: Find the server where the VM is running, and restart the ovs-agent, i.e. "service ovs-agent restart". Did this help, or is the agent crashed, any zombies?
Possible root cause: These type of errors are typically ovs-agent bugs. First update oracle vm manager to the 3.2.4 release, not 3.2.6. Next update the dom0s to 3.2.4, not 3.2.6. You may need to setup a ULN 3.2.4 yum repo to update the dom0s. As you can see in these forms, 3.2.6 is may not ready for prime time, stick with 3.2.4, is stable.

Cisco UXL Web service is in a STOPPED state!!

This is on UCCX 8.5
I have a issue where the Cisco UXL Web service is in a STOPPED state!!
Running this command:
admin:utils service list
I see the following:
Cisco UXL Web Service[STOPPED] Component is not running
I then am trying to run this command:
admin:utils service start Cisco UXL Web Service
But get the following :
Executed command unsuccessfully
Invalid service name for start/stop, valid names are:
How do I enable the Web service?!?!?

The UXL service is not used by CCX.
It used by UCM to Conduct authentication checks by verifying the end user name and password when an end user logs in to Cisco IP Phone Address Book Synchronizer.
It is just something that was not removed when Cisco ported CCX to the Linux platform, maybe they have plans to use it in a future release.
Graham

DOE_MASS_ACTGEN queue is in RUNNING state

Hi experts:
I transport to test system and when I execute the SDOE_WB in test system the message "DOE_MASS_ACTGEN queue is in RUNNING state" appears. All lights are green, I regenerate data objects, backend adapters and distribution models. I execute de DM consistency check and is empty. SQM2 is empty. What could be happening?
I'm in 7.1 SP11.
Thanks in advance. Regards.

Dear Siva,
Thank you very much for the note. We were able to successfully to complete DOE MASS ACT GEN queue in 000.
The respective DMs, Data objects and Backend adapters are in Status Green in 000 client.
However, what I also see that for :
(a) MAS SMARTPHONE 1.4 DMSWCV -> Distribution Model -> Data Object -> Registered is in RED status
(b) SAP BASIS 7.0 Distribution Model -> Data Object -> Registered is in RED status
As I mentioned, we successfully generated the SAP BASIS DMs and related objects. But still, the registered object is RED. Is this the concerned behaviour or should we do anything from our end ?
Regards,
Viju

SMQ1 queues are in stop state

Similar Messages

Maybe you are looking for