SMQ2 Queue sys.failed

HI all,
In CRM system SMQ2 queue name R3AD_ACCOUNTING is getting system failed.
When iam trying to unlock,activate and Execute those queue entries(5677) its not working i am getting the Message that FUNCTIONAL MODULE DOES NOT EXIT for this iam deleting the queue entries one by one after checking each one.
This queues are coming from R3 because of sale/service billing document post. when i check in SMW01 i didnt get any information related to this queue.
Is it any other way to solve this issue. How to resolve ?
Do the needful..
regards,
shoki.

HI,
when i check the queue entries i got the Functional module BAPI_CRM_SAVE,and queue name R3AD_ACCOUNTING, STATUS TEXT says that " Bdoc status failed,Bdoc not found".
system doesn't have dump errors too.
I came to know that when ever you get the message "Function module not found for this exception" for Queue entries we can delete that queue entry, but the problem is i have so many entries, Its not possible check one by one and delete?
sould i delete this all entries at once? Is it any solution?
Thanks,
shoki

Similar Messages

SMQ2 queue stops

Hi,
I have an integration process that sends a synchronous message (soap adapter) to a receiver system. After that the receiver system needs about 5 to 10 minutes to respond to the request. Sometimes this is no problem and the queue of outgoing messages resides in status running.
However most time the queue stops after some minutes and the only way to go on with processing is to manually unlock the queue in SMQ2.
Why does this happens? Is there a possibility to restart the queue automatically? Is there a timeout period in queue processing that can be inceased?
Thank you in advance,
Daniel

Dear Daniel,
In synchronous scenarios running over PI, several communication components are involved where each may lead to a time-out. Such a time-out on one communication component causes the messaging scenario to fail as a whole.
Various components which may contribut for your queue to fail are:
Messaging System specific time out, SOAP sender channel time out, and your receiver Adapter time out property.
There are some pre defined values for them already set in our PI system and these needs to be changed to accomodate the failure case also.
To give you a lead, In NWA, Go to->Operation Management->Systems-> Start & Stop -> Java Services -> (Under Related Tasks) Java System Properties. Select your adapter type and under properties change the default time.
For Sender SOAP channel, add u2018Parameter Nameu2019 as: XI.Timeout and in u2018Parameter Valueu2019, give any value in milliseconds.
Warm Regards,
Anshul

SMQ2 queue is blocked and messages are in u201Cwaitingu201D status in RWB

Hello,
A SMQ2 queue is blocked with XXX data and these messages are in u201Cwaitingu201D state in RWB.
What could be the reason?
Im sure its not because of the space because all the messages which flow after that was there in the directory.
Regards,
Mathangi

Hi Mathangi,
double click on the queue and click on the first message which will direct to MONI
--> check what exactly the error is and try to resolve the error accordingly
if you are unable to do that
Right click on the first message and save LUV it will be saved in SMQ3
then unlock the queue and execute again it will process successfully..
later you can process the message which is saved
Regards,
Naveen

Maintenance Optimizer - ABAP queue check failed

Hi guys.
When running Maintenance Optimizer for a SAP ERP 6.0 EHP4 which has SAP HR 604 installed, the following message is displayed
ABAP queue check failed
Error The Installation/Upgrade Package for Add-on SAP_HR rel. 600 is not available.
The goal is update toEHP7 SP2.
Not sure why is stating SAP_HR rel. 600 package is not available when the system has 604 release.
During packages selection, Human Capital Management is checked and on the source system is listed SAP_HR 604 SP12
The Solution Manager version is 7.1 SPS8, CR Content is updated to 9.9.
Also have applied SAP Note 1277035 Recommendations, releted to EHP4 Missing, but still no luck
This seems to be similar when SUM perform an EHP Inclusion, and cannot find the packages on the EPS Directory, but this is happening on the Maintenance Optimizer.
Is this a problem with SAP Backbone, or should i do some manual corrections on the system or Solution Manager to make it aware SAP_HR is at al level 604 SP 12?
Thanks!

Hello,
That type of error you describe is mostly always related to an issue in the SMSY/LMDB definition.
It is likely that the issue is a wrong product instance was assigned to the system.
In LMDB it is easy to check , even without verification checks (which sometimes may be the root cause, a bad verification check happens sometimes). If you go to the product system, then open the node technical systems -> AS ABAP -> Software, and go to the product instance tab (in SP10, product instance - details), when you select a given product instance , you see whether the software components that are part of it are installed or not (there is a frame in the lower part of the screen that shows the software components with flag 'installed' ticked or not). Chances are, one or more of the instances have few or no software components installed.
Mind you, you must keep at least one SAP ERP 6.0 product instance assigned, this would be the exception to the rule, but if you have an EHP4 for SAP ERP 6.0 system, it should be only one.
Best regards,
Miguel Ariño

Sysfail locks smq2 queue

Hi,
We are live with our PI7.1 system as of 11/6 and are seeing serious issues when a data error causes a sysfail for a SMQ2 queue. At this point the queue is locked for further processing. We have monitors setup which page us for this situation. However, we really need to prevent the queue from locking so other messages are sent even when one item is in sysfail status.
Notes 813209 and 1118297 do not seem to offer any help is this situation.
Is there a way to prevent the queue from locking due to sysfail status messages?
Any help is greatly appreciated.
Regards,
Rick Taylor

Rick,
Check out this blog..
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID1371322850DB11715461650132929943End?blog=/pub/wlg/2728
"For automatic qRfc failure recovery, schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues. "
I remember there is a way to put error messages in different queue so that current queue wont b lock anymore...I'll check and let you know.
Hope this will help.
Thanks,
Nilesh

SMQ2 queue deletion.

Hello Everyone,
Is there a way to delete the SMQ2 queues in SRM? We have thousands of records and we do not want to delete each queue manually.
Any help to get this?
Regards,
Khushbu.

Hi Kushubhu
See the following link it may be helpful for you.
Re: Mass Delete of BDocs in SAP CRM system
with regards
Manjunath

Error - ipi, message queue operation failed

we are trying to startup bmq but its finished with error.
Please could you help us ?
BEA MessageQ, V5.0 RP8, Wed Mar 29 13:13:49 EST 2000
Copyright (c) 2000 BEA Systems, Inc. All rights reserved.
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, group control process for group 102 is running
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, queuing engine is running
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
ipi, message queue operation failed
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, initialization failure
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, caught signal 15
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, queuing engine is exiting
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, group control process for group 102 is exiting

Could you please provide the init file and the OS information,
Also, Please enable the DMQIPI_TRACE to get more trace if possible, thanks.
Regards,
/Lingtao
Edited by: Lingtao on Mar 6, 2012 2:51 AM

Jetadmin Queue creation failed.

I got a new Novell 6.5 server last week and I can't add a queue thru Jetadmin. The error message is "Queue creation failed", as I try to add a queue to the new server.
IPX is loaded and working fine and I have checked the bindery context. I have also run dsrepair, as instructed by all other threads I could find regarding the problem, with no luck. I have 5 other 6.5 servers with bindery queue based printing and even though I would like to eventually move over to ndps, I really need this running right now..
I can add a printer thru non-ndps add printer in the nwadmin program, but it's only visible by browsing thru the tree.
Any ideas? Please?!?

Originally Posted by AndersG
Bburke,
> Even when I add a queue manually, it doesn't show up in the jetadmin
> utility as a servicable queue.
>
Did you create it as a bindery queue? IIRC does JetAdmin require that
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Discover the new Novell forums at http://forums.novell.com
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
Enhancement Request
I found the problem. The bindery context wouldn't load because there wasn't a replica on that server. Thanks for all the help! :)

SMQ2 Queue Monitering and stuck up problem

Hello Experts ,
Below is the situation
u2022     An interface is asynchronous In bound in ECC from PI as a PROXY message and the quality of message is EOIO (Exactly once in order) i.e. it has a definite queue.
u2022     The actual method of the Provider class has the code which posts the data into the ECC system using BAPI.
u2022     If BAPI is successful the message is successfully passed BUT if BAPI returns an Error an exception is raised (CX_AI_APPLICATION_FAULT) and the errors are logged into Zee tables. After the resolution of errors the xml id is reprocessed using SXI_MONITOR Tcode
Concerns
u2022     As the Message quality type is EOIO it has a dedicated queue and if the first message in the queue fails the queue is in status SYSFAIL , as per in tcode SMQ2
u2022     The status text for the ID in the Queue is - An exception occurred that was not caught.
u2022     Due to this all the rest of the messages in the queue get stuck up i.e. Scheduled state, unless and until you go to SMQ2 and delete the message with the exception.
u2022     Expected is that the queue should not stop or not go into SYSFAILT if an application exception is thrown.
u2022     In our situation the message volume in the queue is LARGE may be 5K message a day.

Anup Deshmukh wrote:
Hello Experts ,
> Below is the situation
> u2022     An interface is asynchronous In bound in ECC from PI as a PROXY message and the quality of message is EOIO (Exactly once in order) i.e. it has a definite queue.
> u2022     The actual method of the Provider class has the code which posts the data into the ECC system using BAPI.
> u2022     If BAPI is successful the message is successfully passed BUT if BAPI returns an Error an exception is raised (CX_AI_APPLICATION_FAULT) and the errors are logged into Zee tables. After the resolution of errors the xml id is reprocessed using SXI_MONITOR Tcode
> Concerns
> u2022     As the Message quality type is EOIO it has a dedicated queue and if the first message in the queue fails the queue is in status SYSFAIL , as per in tcode SMQ2
> u2022     The status text for the ID in the Queue is - An exception occurred that was not caught.
> u2022     Due to this all the rest of the messages in the queue get stuck up i.e. Scheduled state, unless and until you go to SMQ2 and delete the message with the exception.
> u2022     Expected is that the queue should not stop or not go into SYSFAILT if an application exception is thrown.
> u2022     In our situation the message volume in the queue is LARGE may be 5K message a day.
Why dont you have Fault message mapping , that captures the exception and trigger an alert using the alert framework..
Best Regards,
XA

TimeOut Exceeded in SMQ2- queue Block

Hi all,
I am having an issue with my production PI BOX. Not sure if there is any solution for this.
I have some interfaces in PI which expects huge payload data.Sometime the messages are getting failed in SMQ2 with error message " Time Limit Exceeded ". This is not happening with one particular interface message.Sometime teh queue got blocked for one interface and then the other day with some other interface.
When i tried to resend the same messages by selecting Execute LUW option, all of them have gone through fine. But we cannot do this manually everyday. I just wants to know where exactly the time out parameter has been maintained for pipeline processing.
The messages are getting timed out in receiver grouping pipeline step.
I have gone through the = Michal Blog : 3802 about the time out. But nothing helpful on that.
Could anyone of you help me out here?

Hi
We are using JDBC communication channels for all these interfaces. But messages are failing in SXMB_MONI .ideally it means that messages are still in Integration engine. right?
It doesn't send teh message to adapter engine
If we increase timeout level at adapter level, does it really help? If yes how come? Could you please explian?
Thanks
Rajesh

Mails/Alerts-triggered for messages stuck in queues and failed in moni

Hi,
I have two doubts.
1) Messages are getting stuck in smq2 of my ECC and PI system. I have to manually push them. Is there any mechanism in which we can get alerts/mails when messages get stuck in queues.
I have already gone through the blog /people/santhosh.kumarv/blog/2009/05/19/sap-xipi-alerts-for-queue-errors and I have implemented it in ECC system. But no mails were generated.
2)Is there any method in which I can get alerts/mails when a message fails in sxmb_moni of ECC system?
Thanks and regards,
Siji

Hi Sanjeev,
I made a report with the following code in it and executed it. So I think that should work even if the job for it is not scheduled. There were messages stuck in queue. But no alert was generated. I had also created alert category in ECC.
Thanks and regards,
Siji

SMQ2 queue

Hi Experts ,
We are getting so many queue failure related to complaint , I want to know if there is any report or function module which can give me complaint ID for which the queue failing and the LUW data.
Thansk & Regards,
Akhilesh Bhagat.

Hi Akhilesh,
the queue name created by the SAP CRM middleware in SMQ2 depends on the configuration of the CRM middleware itself. Therefore, there is no function module available that can provide a complaint ID based on the the queue name. However, usually the queue name consist of some prefix an the ID of the business partner or the ID of the one order object. As an example consider the following queue name:
CSA_ORDER_0000292963
It consists of the prefix "CSA_ORDER_" and in this case the ID of an activity (292963).
If you can't identify the complaint using this approach the easiest way is to debug the failing LUW to find the ID. As you've mentioned that you get a lot of errors in SMQ2 it seems that there is a general error. So I'd suggest to try to identify this error by debugging a few queue. Once you solved the underlying error you can simply restart the queues without the need to analyse every single one of them.
Best,
Christian

SMQ2 Queue blockedu0085

Hi All,
I am having problem with my Queues in XI. For example 10 messages are passing thru my XI system. In the 2nd one gets fails. Remaining 8 messages will be in Queue. We can see in SMQ2 transaction and manually we have to clear the queue in this transaction.
Is it possible to pass the remaining 8 messages without clearing the queue in SMQ2?
Thanks,
Jane.

hi jane,
we can repush the rest of the messages.
go to SMQ2->click on the error queue->click on the message that is causing the error->right click on the message-> click on "SAVE LUW".
now the message is saved and removed from the queue.
now go to SMQ3 there you will find your saved message.
now select the saved message ,right click on that and select "RESTORE LUW".
so the saved message will be put in a seperate queue for processing.
this should resolve your issue.
u need to repeat the process for any message ending with "SYSTEM FAILED".
remeber to restore saved failed message in SMQ3 if it has anty dependency on the successive messages like "INSERT" message then "UPDATE" message
Thanks & Regards,
Rama Krishna

HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command
prompt...) DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because
it has no enabled devices associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then
restore the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command prompt...)
DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because it has no enabled devices
associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then restore
the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

SMQ2 Queues Stuck

Hello All,
I have a problem of one of the queues in CRM 5.0 is struck with SYSFAIL error. The queue name is R3AD_MATERIAFAYB401007. When I double click the queue entry I get the error on FM BAPI_CRM_SAVE with the remote user of R/3. The statustext is is 'Error in Mapping (Details: transaction SMW01)'.
Does any one knows how to set this queue right ?
Regards
Rashit

Rashit,
You probably are missing product categories in CRM.
Follow this process,
1. Run initial load transaction R3AS for object 'DNL_CUST_PROD1'. Make sure source is 'OLTP' and destination is 'CRM'
2. Monitor the request load using transaction R3AM1 and make sure it completes
3. Go to SMQ2 and double click on the Queue in SYSFAIL status. Select the Queue and click on 'Edit' and click on 'Reset Status'.
4. The Queue should start Running and material should be updated in CRM
<b>Please award points if it helps.</b>
Regards
Haseeb

SMQ2 Queue sys.failed

Similar Messages

Maybe you are looking for