SMQ2 - SYSFAIL - Exception condition "LOGSYS_FOR_GUID_CHANGED" rai - Active
Dear Experts,
Greetings!!.
In CRM SMQ2, ( inbound Queue ), I have a queue "R3AD_ZDNL_COND_A956" displays as a "sysfail" and have unlocked no change in statuses. I been still double clicked on the queue and displays as
"Exception condition "LOGSYS_FOR_GUID_CHANGED" rai"
How to activate this queue from sysfails status.
Regards,
Sany
Dear Rohit,
Thanks and Greetings!!!.
I have Checked both
Cl. Log.System
700 LOGSYS700 83ABE443CF1B475CE1000000AC16020D CRM
700 LOGSYS700 83ABE443CF1B475CE1000000AC16020D R/3
Both are Same, but still the queue is not able to active. If i Delete the entries what implication in CRM and R/3 please clarify me on the same.
Thanking you in anticipation.
Thanks and Warm Regards,
Sany.
Similar Messages
-
ERROR MESSAGE : Exception condition "OBJECT_ID_NOT_FOUND" raised
Hi All
We are on SRM 5.0.When I execute the report BBP_EXTREQ_TRANSFER to
transfer the PR's from R/3 into SRM Sourcing cockpit . The entries get
stuck in the outbound queue in R/3.I get the error as SYSFAIL-
"Exception condition "OBJECT_ID_NOT_FOUND" raised."
We have checked the user and the org structure.
Please Help
Thanks
LeboHi Lebo,
check / do the following:
- Local POrg --> Function: Tick box "POrg; everything else blank
- Local PGroup --> Function Tab: Tick box "Pgroup; everything else blank
As you already have the RFC User assigned to the Entry Channel, just create a new SRM user via the Web and select the Local PGroup as the Org Unit to assign the user. You then should have a "normal" entry in the Org Structure, like for all other users.
Cheers,
Claudia -
Exception Condition "Fatal_Error" Raised in SMQ2
Hi,
I am doing File to Proxy(ECC) Asynchronous scenario. in this getting the error in Target side(ECC) in SMQ2 message is showing error , when I double click on this error getting the error message like Exception Condition "Fatal_Error" Raised.
Because of this interface error Remaining interfaces also getting failure.
these interfaces was working fine.
I searched in SDN, but i didn't get proper solution for related to this issue.Pl suggest us to resolve this issue.
Regards,
PasiHi Pasi,
This looks like a data issue which has resulted in an exception in Proxy code. If this is not a production system I will suggest you to delete the error entry from queue and test with an older successful data and see whether it gets successfully executed or not.
Or you can try to debug the proxy code, with XML structure (taken from SXMB_MONI of PI) and see where the exception is raised
Regards
Suraj -
Exception condition "NO_TRIGGER_INSTANCE" raised error in SMQ2
Dear all,
i'm getting this error in SMQ2 transaction of xi server.
Exception condition "NO_TRIGGER_INSTANCE' raised
Did anyone encounter this issue before. Pls share your inputs in resolving it,
Regards,
JackHi ,
Can you provide the details of this dump from ST22 for understanding .
Regards ,
Hanumant . -
Exception condition "MESSAGE_ID_NOT_FOUND" raised in SMQ2
Hi,
I am getting below error in production PI(PI7.3) SMQ2 ,
Exception condition "MESSAGE_ID_NOT_FOUND" raised.
i tried to refresh and execute LUW but entry still going to same status and i have deleted first entry then next entry is going to same status.
can you please provide your inputs on this to fix this issue.
Cheers,
GiriHi Giri,
Check if everything is fine with respect to your DB.
also check this note.
1293244 - MESSAGE_ID_NOT_FOUND: Event-driven message processing
Thanks and Regards,
Naveen -
Short Dump, Exception condition "NOT_EXIST" raised
Dear Colleagues!
I am having a problem with short dump, I am getting the message Exception condition "NOT_EXIST" raised.
I am trying to load data to ODS with full load and filtering via a DTP.
In the monitoring the load doesn't even get started.
I have already loaded data succesfully in this ODS... But now it doesn't work anymore..
I also tried to replicate and active all the rules and objects again.
And in the source system if I test the extractor it works fine.
I saw an earlier thread on this issue, and it recommended programs ZDMDELTAREPAIR or RSBDELTAREPAIR, but this thread was especially for BW 3.5. We are using 7.0 and have SP10. Are these programs still valid or is there another note for 7.0?
Hope you can help!
Regards Silje
Does anyone have any ideas?
regards, UrosHi again,
I tried RSBDELTAREPAIR and it worked!
Thanks to the forum again!
Silje -
Exception condition "CONVERSION_ERROR" raised.
Hi,
We have been getting short dumps in our production system daily. I was unable to locate the problem by looking at the dump. The dump says that CONVERSION_ERROR raised.
Which application raised this exception? Again no clue on the same. Please find the text of the dump.
Short text
Exception condition "CONVERSION_ERROR" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_SWF_CNT_CONTAINER==========CP" raised the
exception
condition "CONVERSION_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_SWF_CNT_CONTAINER==========CP" or "CL_SWF_CNT_CONTAINER==========CM02J"
"IF_SWF_CNT_CONVERSION~TO_XML"
or
"CL_SWF_CNT_CONTAINER==========CP" "CONVERSION_ERROR"
or
"SAPMSSY1 " "CONVERSION_ERROR"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "zacwtbsrv0
Network address...... "10.27.191.
Operating system..... "Windows NT
Release.............. "5.2"
Hardware type........ "4x AMD64 L
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 9
Shortdump setting.... "full"
Database server... "ZACWTBSRV063"
Database type..... "MSSQL"
Database name..... "EP1"
Database user ID.. "ep1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 21 2008 00:12:39"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 157
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 8164576
MM Free. 212256
User and Transaction
Client.............. 100
User................ "WF-BATCH"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "FB565CDDF6D0F1BFA292001E0B5D7336"
Program............. "CL_SWF_CNT_CONTAINER==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "EP1"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."0A1BBF4011A4488D408222BD"
Outbound Queue Name.." "
Client.............. 100
User................ "HPRETORIUS"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "WORKFLOW_LOCAL_100"
Source Server....... "zacwtbsrv064_EP1_00"
Source IP Address... "10.27.191.64"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_CNT_CONTAINER==========CP" -
in "IF_SWF_CNT_CONVERSION~TO_XML".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 67
of the (Include) program "CL_SWF_CNT_CONTAINER==========CM02J".
Source Code Extract
Line SourceCde
37 lv_xml_table_req = 'X'.
38 ENDIF.
39 IF xml_stream IS REQUESTED.
40 lv_xml_stream_req = 'X'.
41 ENDIF.
42
43 IF use_xslt NE space.
44
45 cl_swf_cnt_conversion_service=>to_xml_xslt(
46 EXPORTING
47 container = me
48 include_null_values = include_null_values
49 include_initial_values = include_initial_values
50 include_change_data = include_change_data
51 include_texts = include_texts
52 include_extension_elements = include_extension_elements
53 save_delta_handling_info = save_delta_handling_info
54 xml_dom_req = lv_xml_dom_req
55 xml_table_req = lv_xml_table_req
56 xml_stream_req = lv_xml_stream_req
57 IMPORTING
58 xml_dom = xml_dom
59 xml_table = xml_table
60 xml_stream = xml_stream
61 xml_rendered_size = xml_rendered_size
62 EXCEPTIONS
63 conversion_error = 1
64 OTHERS = 2
65 ).
66 IF sy-subrc <> 0.
>>>> RAISE conversion_error.
68 ENDIF.
69
70 ELSE.
71
72 cl_swf_cnt_conversion_service=>to_xml_ixml(
73 EXPORTING
74 container = me
75 include_null_values = include_null_values
76 include_initial_values = include_initial_values
77 include_typenames = include_typenames
78 include_change_data = include_change_data
79 include_texts = include_texts
Could you please help me out in resolving this issue?
Is there any need to apply any OSS notes?
Thanks in advance. And reward points will be given for the solution..
Thanks,
Ravikumar.Hi,
U will receive this error when ever it is not possible to achieve runtime conversion.
i.e When u r passing the data from one type variable to another type if the conversion is not defined or not possible u will get this dump. Just analyze the dump in ST22.
Look at this simple example. Here i am trying to assign 101.23 to l_p for which length is not sufficient. So i will get dump. But if u do the same with character variable it will truncate the data.
DATA: l_p(2) TYPE P DECIMALS 2.
l_p = '103.23'.
WRITE l_p.
So check the place where u r getting the dump. It must be some assignment statement.
Hope it gave some idea on ur case.
Thanks,
Vinod. -
Exception condition "FAILED" raised.
My TRM functional consultant has been trying to run end of day processes in the Transaction RKLNACHT but the following dump appears:
Runtime Errors RAISE_EXCEPTION
Date and Time 16.05.2008 10:33:21
Short text
Exception condition "FAILED" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_POSITIONSERVICE_TRQ========CP" raised the
exception
condition "FAILED".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_POSITIONSERVICE_TRQ========CP" or "CL_POSITIONSERVICE_TRQ========CM00I"
"GET_POSITIONS_BY_DIFF"
or
"CL_POSITIONSERVICE_TRQ========CP" "FAILED"
or
"RKLNACHT " "FAILED"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "tetradev"
Network address...... "192.168.1.81"
Operating system..... "SunOS"
Release.............. "5.9"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "tetradev"
Database type..... "ORACLE"
Database name..... "DEV"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 31 2006 20:59:23"
create on........ "SunOS 5.9 Generic_117171-13 sun4u"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 16759392
Heap.... 0
Page.... 180224
MM Used. 10608952
MM Free. 1957592
User and Transaction
Client.............. 300
User................ "DARLINGTON"
Language key........ "E"
Transaction......... "KLNACHT "
Program............. "CL_POSITIONSERVICE_TRQ========CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_POSITIONSERVICE_TRQ========CP" -
in "GET_POSITIONS_BY_DIFF".
The main program was "RKLNACHT ".
In the source code you have the termination point in line 37
of the (Include) program "CL_POSITIONSERVICE_TRQ========CM00I".
Source Code Extract
Line SourceCde
7 l_selector TYPE REF TO cl_flow_selector_dif,
8 * workarea for table with positions
9 l_tab_position TYPE trqy_position_obj,
10 l_position TYPE REF TO if_position_trq,
11 l_count type i.
12
13 * initialization
14 CLEAR re_tab_position.
15
16 * Get positions for ranges
17 CALL METHOD ca_pos_identifier_dif=>agent->get_persistent_by_range
18 EXPORTING
19 im_context = trqco_con_trq
20 im_ranges = im_ranges
21 RECEIVING
22 re_identifiers = l_tab_identifier.
23 CHECK NOT l_tab_identifier IS INITIAL.
24
25 LOOP AT l_tab_identifier INTO l_identifier.
26
27 l_selector = l_identifier->derive_selector( ).
28
29 * get TRQ positions for selectors
30 CALL METHOD read_positions_by_selector
31 EXPORTING
32 im_selector = l_selector
33 RECEIVING
34 re_tab_positions = l_tab_position.
35 DESCRIBE TABLE l_tab_position LINES l_count.
36 IF l_count <> 1.
>>>>> raise failed.
38 ENDIF.
39 APPEND LINES OF l_tab_position TO re_tab_position.
40 ENDLOOP.
41
42 ENDMETHOD.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 2
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE End-of-Day Processing
SY-MSGTY E
SY-MSGID 64
SY-MSGNO 030
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080516
SY-UZEIT 103319
SY-XPROG SAPLSBAL_DB
SY-XFORM %_CONTROL_EXIT_DYNPRO
Does anyone have suggestions as to how I can solve this problem?
Assistance will be appreciated.bumping...any suggestions...welcome
-
Exception condition "INTERNAL_ERROR" raised
Runtime Errors RAISE_EXCEPTION
Date and Time 21.08.2014 21:53:43
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLCEI0" raised the exception
condition "INTERNAL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLCEI0" or "LCEI0U30"
"VC_I_GET_CONFIGURATION"
or
"SAPLCEI0" "INTERNAL_ERROR"
or
"SAPMSSY1 " "INTERNAL_ERROR"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sap01717"
Network address...... "10.61.89.105"
Operating system..... "Linux"
Release.............. "2.6.40-0.8-default"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 15
Shortdump setting.... "full"
Database server... "sap01716"
Database type..... "ORACLE"
Database name..... "QWT"
Database user ID.. "SAPDAT"
Terminal................. "10.61.31.114"
Char.set.... "C"
SAP kernel....... 720
created (date)... "Mar 17 2013 18:46:25"
create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116"
Database version. "OCI_102, 11.2.0.3.0, V1, default"
Patch level. 420
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Linux 2.6, Linux 3"
Memory consumption
Roll.... 0
EM...... 16759232
Heap.... 0
Page.... 16384
MM Used. 14978448
MM Free. 1777544
User and Transaction
Client.............. 500
User................ "RFC_TAULIA"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "53F6515E320E5BBBE10000000A3D5969"
Program............. "SAPLCEI0"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchronous and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."SAPJCo30"
Function Module..... "/TAULIA/CT_RFC_BUS_DOC_GET"
Call Destination.... "SAPR3"
Source Server....... "SWDETDOLPHPODD"
Source IP Address... "10.61.31.114"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLCEI0" - in
"VC_I_GET_CONFIGURATION".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 259
of the (Include) program "LCEI0U30".Hi Arun,
the exception INTERNAL_ERROR of function module VC_I_GET_CONFIGURATION hasn't been caught, which leads to a short dump.
Check, where INTERNAL_ERROR is raised in your system In our system the only remaining code is after call of function module CUCQ_GET_CONFIGURATION_PARAMS.
Please try to debug, why this exception is raised.
Regards,
Klaus -
Exception condition "HIERARCHY_NOT_FOUND" raised. - SAPLRRHI
Hello all,
My issue is very similar as the one described in thread : HIERARCHY_NOT_FOUND, but not solved in the other thread.
I tried to update the system to SP21 as told in the topic, but the issue is still present :
when I open a query with the query designer, I'm still having the same issue. Via the RSRT transaction I get the following error message :
Short text
Exception condition "HIERARCHY_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLRRHI" raised the exception
condition "HIERARCHY_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLRRHI
Include LRRHIU27
Row 36
Module type (FUNCTION)
Module Name RRHI_ASOHIEDIR_READ
I add that the query use a 0cust_sales based hierarchy, when (at the query level) I remove the time dependance the query works fine, but when I select "type of derivation" in the hierarchy display and use 0D_FC_LM1 : I get the error.
(transaction RSTHJTMAINT--> 0D_FC_LM1 based on 0calmonth and use "first day)
Thanks in advance for help.First of all, thanks Maxim to spend time on my issue, it is really appreciated (and sorry for the late answer, I did not have any computers during the week-end).
I checked both tables (SE16 then "number of entries" button) : RSHIEDIR has 5 entries and RSRHIEDIR_OLAP has 9.
So I go to my info-object 0cust_sales, hierarchy tab, "maintain hierarchy" button and reactivate the hierarchy (I only have one line available) and I get the message "There is no modified version for this hierarchy." When I check again the entries number in both tables : no change, (still 5 and 9).
Please find bellow the abap code I get with the message (when I use RSRT) :
Source Code Extract
Line SourceCde
6 *" EXPORTING
7 *" REFERENCE(E_S_HIEDIR) TYPE RRHI_S_HIEDIR
8 *" EXCEPTIONS
9 *" HIERARCHY_NOT_FOUND
10 *"----
11 data: l_hiesid type rrhi_hiesid,
12 l_TMPJOIN type rs_bool.
13
14 CALL FUNCTION 'RRHI_HIESIDASO_GET'
15 EXPORTING
16 i_hiesid = i_hiesid
17 IMPORTING
18 E_HIESID_ASO = l_hiesid.
19
20 if l_hiesid < 0.
21 l_tmpjoin = rs_c_false.
22 else.
23 l_tmpjoin = rs_c_true.
24 endif.
25
26 CALL FUNCTION 'RRHI_HIEDIROLAP_READ'
27 EXPORTING
28 i_hiesid = l_hiesid
29 I_TMPJOIN = l_tmpjoin
30 IMPORTING
31 E_S_HIEDIR = E_S_HIEDIr
32 EXCEPTIONS
33 hierarchy_not_found = 1.
34
35 if sy-subrc <> 0.
>>>>> raise hierarchy_not_found.
37 endif.
38
39 ENDFUNCTION.
Thanks again and please let me know if you need more informations. -
Exception condition "HIERARCHY_NOT_FOUND"
Hello,
we have scenario in Xcelsius where we used QAAWS with different queries.
after upgrading to the EhP1 (BW System) we strated getting WIS errors in QAAWS tool wrt 0country hierarchy even though there are no hierarchies activated in queries.
I rebuilt all the connections but the error is not eliminated - when I try to create a new universe the error is triggered:
Error at quering the hierarchies for dimension 0COUNTRY (Cube xxx/xxxxxx):Exception condition "HIERARCHY_NOT_FOUND" raised.
tried to repair the InfoObjects as well, but it didn't work
any other suggestions?
thanksHi Ingo,
we don't want to use the hierarchy in the universe (thus it's not activated in the BW Query)
- i can run BW Query in BEX Web normally without any errors
- when i perform MDXTEST in BW system the exception HIERARCHY_NOT_FOUND is trigerred:
Auslösestelle des Laufzeitfehlers
Programm SAPLRRH1
Include LRRH1U03
Zeile 69
Modultyp (FUNCTION)
Modulname RRH1_HIERARCHY_IN_TO_EX
I already repaired hierarchies and tables of the 0COUNTRY InfoObject in RSRV , but it didn't help.
Hierarchy is not found in rshiedir table, even though it's there in A version - how can I repair this issue? -
Hi SAP Gurus,
I have activated Document splitting & when iam trying to post the document then iam getting the following Run Time Error.
Iam using SAP ECC 6.0
Short text
Exception condition "WRONG_PARAMETERS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLGLT2" raised the exception
condition "WRONG_PARAMETERS".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLGLT2
Include LGLT2F07
Row 12
Module type (FUNCTION)
Module Name G_BEB_MOVE_ACCIT_TO_STRING
Source Code Extract
Line SourceCde
1 ----
2 * Created by : SAP* *
3 * Date : 13.09.2007 *
4 * Time : 16:57.56 *
5 ----
6 * This Report is generated by Report RGUGGLT0 *
7 ----
8
9 IF I_LEDGER = SPACE.
10 RAISE WRONG_PARAMETERS.
11 ELSE.
>>>>> RAISE WRONG_PARAMETERS.
13 ENDIF.
Kindly help me for the above.
Regards,
AmitabhHi Amitabh,
check this out:
1) Start transaction: SA38
2) Execute program: RGUGGLT0 (# to generate includes for flexible G/L)
3) Go back & repeat your posting transaction
4) Tell us if transaction worked fine
5) Reward me with points
Cheers!
B -
Hi,
When i preview my Bi query in potal i am getting following exception :
RFC_ERROR_SYSTEM_FAILURE: Exception condition "FAILED" raised
Earlier i had already published some query which is working properly, but the new one which i am publishing now is giving me above exception.
Regards,
Jigar OzaHi,
Check the target on which the query is built is active in the same server. -
Hello Experts,
Would anyone be able to help me with information on exceptions & conditions on a web template with multiple reports.
We have 5 queries on web template, with all queries from the same multiprovider. We need exceptions and conditions button on the template which can control all the queries. Same reuqired for export to excel button too, but the first one is more critical.
Is this possible and if yes, how?
regards / GRaiHi Rai,
For adding buttons in WAD.
Check this link..
https://www.sdn.sap.com/irj/scn/forumsearch
For exception in WAD
You have the following options:
● In the context menu, choose Exceptions ® Create New Exception.
● Choose Settings and then choose Add from the Exceptions tab page.
The exception wizard appears.
For condition.
¡ Choose New Condition. (You can find this menu entry in the Query Designer toolbar under to the right of Condition). The Define Condition dialog box appears.
¡ Specify a name for the condition in the Description field.
and u might be knowing the procedure for creating them..
and the buttons can be done by customising the Web Templates..
Hope this helps u..
Best Regards,
VVenkat...
Edited by: Venkata Narayana Jakkampudi on Dec 12, 2008 6:06 PM
Edited by: Venkata Narayana Jakkampudi on Dec 12, 2008 6:11 PM -
How to handle message "Exception condition "CNHT_ERROR_PARAMETER" raised"?
Hi,
Whenever I try to open Web Dynpro Comp./Intf->Views using transaction SE80, I am getting a short dump showing message "Exception condition 'CNHT_ERROR_PARAMETER' raised'. In the analysis, I have found that A RAISE statement in the program "CL_GUI_HTML_VIEWER============CP" raised the exception condition "CNHT_ERROR_PARAMETER". Since the exception was not intercepted by a superior program, processing was terminated. Can anyone help to get rid of this problem?
Thanks & Regards.
Deepjyotihi,
Looks like, ITS services are not fully active or not compeltely published.
Check whether webgui services are active in SICF.(test service).
Also, check all the ICM parameters.
Regards
Srinivas
Maybe you are looking for
-
After changing LookAndFeel: Exception: Colors cannot be null
Hi All! I've just created a frame and an internal frame. But after I close the internal frame and change the look and feel (for example from windows to windows classic) and reuse of the internal frame I've get the following exception: Exception in th
-
Problem is with the custom field validate in the custome tab
Hello Experts, We have created additional tab in cProject Project definition level with some Custom fields. 1. These all custom field we have maintained search help with Check table. But cProject screen these fields it is allowing other values also a
-
Java wont work on my Macbook Pro
Hi, Ive recently purchased a Macbook Pro and am totally GREEN! I need to view lectures online and its stating that in order to do this I need to enable javascript or download the latest version of adobe flash. So I downloaded the latest version of ad
-
I have Hp pavillion p001tx. I am unable to refresh reset and restore my laptop what to do. evry system check passed My laptop boots in safe mode only and safe mode with networking and netwrk do not work
-
We're deploying an applet, and want to be sure to use a specific version of the JRE. So far we've been using 1.4.2 without problems, and now its time to support 1.5.0 (5.0). We intend to do this with <object classid="clsid:CAFEEFAC-0015-0000-0000-ABC