SMQS registration

Hi Guys,
Is it mandatory to register the backend R/3 ERP system here. Our's is a production system live for nearly 4 years.
We have registered the BW system here but the R/3 was never registered here. But the rest of configuration is in place.
Also the communication between CRM / R/3 happens seamlessly.
So what is the advantage of registering the R/3 in SMQS??

If you're sending data from CRM ot ECC then it should be necessary to register the ECC destination, otherwise the queues carrying data in this direction should not porcess automatically. Accroding to all RFC documetnaiton, the queues would go into status Ready and be need ot be manually activated. Do have R3AU* oubtound queues? If you do thne they whould only process automaitcally if the correspoding destination is registered in SMQS. That's how it's supposed to work, at least. Maybe a job is scheduled to activate such queues? Or perhaps you don;t use these queues?
Regards,
Brian.

Similar Messages

Profiles for Basis Admins

Does anyone have a list of transactions that would be considered adequate for a basis administrator on a production system, which would allow them to do all the work they may need to without logging in with a sap_all id?
What is the best practice for access for basis in production?
Lee

Hi Lee-
I can understand where are you coming from :). You needed the list of all possible basis tcodes in production environment rather adopting strenuous task of deriving and identifying all required functionality from SAP Standard role template for basis. Not an issue
You can refer the tcodes listed below in production environment. It includes all required for regular support, monitoring & performance analysis.
SSO2      Workplace Single Sign-On Admin.
STRUSTSSO2      Trust Manager for Logon Ticket
BD82      Generate Partner Profiles
SMT2      Trusting systems (Display <->Maint.)
SPAU      Display Modified DE Objects
SDCCN      Service Data Control Center
SLG1      Application Log: Display Logs
SGEN      SAP Load Generator
STMS_MONI      TMS Import Monitor
STMS      Transport Management System
SCOOL      COOL Repository
PFUD      User Master Data Reconciliation
SMMS      Message Server Monitor
SICK      Installation Check
SMICM      ICM Monitor
SE38      ABAP Editor
AL04      Monitor call distribution
AL08      Users Logged On
AL11      Display SAP Directories
AL12      Display table buffer (Exp. session)
AL13      Display Shared Memory (Expert mode)
AL15      Customize SAPOSCOL destination
AL16      Local Alert Monitor for Operat.Syst.
BD21      Select change pointer
BD50      Activate Change Ptrs for Mess. Type
BD51      Maintain function modules (inbound)
BD52      Activ.change pointer per chng.doc.it
BD54      Maintaining Logical Systems
BD64      Maintenance of Distribution Model
BD97      Assign RFC dest. to Logical Systems
CK11      Create Product Cost Estimate
DB01      Analyze exclusive lockwaits
DB02      Tables and Indexes Monitor
DB03      Parameter changes in database
DB12      DBA Backup Logs
DB6BACKHIST      DB6: DBA Planning Calendar
DB6CLP      DB6: Command Line Processor
DB6COCKPIT      DB6: DBA Cockpit
DB6EXL      DB6: Analyze Exclusive Lock Waits
DB6PERF      DB6: DB2 UDB Cockpit Performance
DB6SPACE      DB6: Space Analysis
FTXP      Maintain Tax Code
KOSRLIST_PR      Projects/Nets: Coll. Displ.SettRules
LBWE      LO Data Ext.: Customizing Cockpit
LSMW      Legacy System Migration Workbench
OS01      LAN check with ping
OS03      O/S Parameter changes
OS04      Local System Configuration
OS05      Remote System Cconfiguration
OS06      Local Operating System Activity
OS07      Remote Operating System Activity
OSS1      Logon to SAPNet
OY05      Factory calendar
RBDMIDOC      Variant for RBDMIDOC
RSA7      BW Delta Queue Monitor
RZ01      Job Scheduling Monitor
RZ03      Presentation, Control SAP Instances
RZ04      Maintain SAP Instances
RZ10      Maintain Profile Parameters
RZ11      Profile Parameter Maintenance
RZ12      Maintain RFC Server Group Assignment
RZ20      CCMS Monitoring
SA38      ABAP Reporting
SAINT      Add-On Installation Tool
SALE      Display ALE Customizing
SASAPIMG      Call Up Project IMG
SBIW      BIW in IMG for OLTP
SCON      SAPconnect - Administration
SCOOLTOOL      COOL Tools
SCOT      SAPconnect - Administration
SCU0      Customizing Cross-System Viewer
SCU3      Table History
SE03      Transport Organizer Tools
SE06      Set Up Transport Organizer
SE12      ABAP/4 Dictionary Display
SE13      Maintain Technical Settings (Tables)
SE15      ABAP/4 Repository Information System
SE18      Business Add-Ins: Definitions
SE37      ABAP Function Modules
S_TABU_DIS Display Tables (customize it to ztcode)
SCC4 (customize it to ztcode)
SE63      Translation: Initial Screen
SE11      ABAP Dictionary
SE11_OLD      ABAP/4 Dictionary Maintenance
SE80      Object Navigator
SE81      Application Hierarchy
SE82      Application Hierarchy
SE84      R/3 Repository Information System
SE93      Maintain Transaction Codes
SESSION_MANAGER      Session Manager Menu Tree Display
SICF      HTTP Service Hierarchy Maintenance
SM01      Lock Transactions
SM02      System Messages
SM04      User List
SM12      Display and Delete Locks
SM13      Administrate Update Records
SM14      Update Program Administration
SM20      Security Audit Log Assessment
SM21      Online System Log Analysis
SM28      Installation Check
SM35      Batch Input Monitoring
SM36      Schedule Background Job
SM37      Overview of job selection
SM37C      Flexible version of job selection
SM38      Queue Maintenance Transaction
SM49      Execute external OS commands
SM50      Work Process Overview
SM51      List of SAP Systems
SM56      Number Range Buffer
SM58      Asynchronous RFC Error Log
SM59      RFC Destinations (Display/Maintain)
SM61      Backgroup control objects monitor
SM62
SM63      Display/Maintain Operating Mode Sets
SM64      Trigger an Event
SM65      Background Processing Analysis Tool
SM66      Systemwide Work Process Overview
SM69      Maintain External OS Commands
SMEN      Session Manager Menu Tree Display
SMGW      Gateway Monitor
SMLG      Maint.Assign. Logon Grp to Instance
SMLT      Language Management
SMQ1      qRFC Monitor (Outbound Queue)
SMQ2      qRFC Monitor (Inbound Queue)
SMQR      Registration of Inbound Queues
SMQS      Registration of Destinations
SMT1      Trusted Systems (Display <-> Maint.)
SMX      Display Own Jobs
SNL1      Display NLS (character set, lang.)
SNOTE      Note Assistant
SNRO      Number Range Objects
SNUM      Number Range Driver
SO00      SAPoffice: Short Message
SO01      SAPoffice: Inbox
SO02      SAPoffice: Outbox
SO03      SAPoffice: Private Folders
SO04      SAPoffice: Shared Folders
SO05      SAPoffice: Private Trash
SO07      SAPoffice: Resubmission
SO23      SAPoffice: Distribution Lists
SO50      Rules for inbound distribution
SO99      Put Information System
SOST      Overview transmission requests
SP01      Output Controller
SP12      TemSe Administration
SPAD      Spool Administration
SPAM      Support Package Manager
ST01      System Trace
ST02      Setups/Tune Buffers
ST03      Performance,SAP Statistics, Workload
ST03N      R/3 Workload and Perf. Statistics
ST04      DB Performance Monitor
ST05      Performance trace
ST06      Operating System Monitor
ST07      Application monitor
ST10      Table Call Statistics
ST11      Display Developer Traces
ST14      Application Analysis
ST22      ABAP dump analysis
STAD      Statistics display for all systems
STAT      Local Transaction Statistics
SU01D      User Display
SU03      Maintain Authorizations
SU51      Maintain Own User Address
SU52      Maintain Own User Parameters
SU53      Evaluate Authorization Check
SU55      Call the Session Manager menus
SU56      Analyze User Buffer
SUIM      User Information System
S_BCE_68001285      Transaction S_BCE_68001285
S_BCE_68001402      With Unsuccessful Logons
S_BCE_68001418      Act. Grps According to Complex Crit.
S_BCE_68001420      Act. Grps According to Complex Crit.
S_BCE_68001429      Transactions for User
TU02      Parameter changes
USMM      Customer measurement
WE02      Display IDoc
WE05      IDoc Lists
WE07      IDoc statistics
WE08      Status File Interface
WE09      Search for IDoc in Database
WE20      Partner Profiles
WE21      Port definition
WE30      Development IDoc Type
WE46      IDoc administration
WE60      Documentation for IDoc types
WE61      Documentation for IDoc record types
WE63      Documentation
Cheers!
Ashok

Partner Application Registration

When using the Administer Partner Applications page, it appears the application is not being registered completely. The information does not appear in the WWSEC_ENABLER_CONFIG_INFO$ table, as has been suggested in prior posts (everything is fine in WWSSO_PAPP_CONFIGURATION_INFO$).
I am attempting to deploy the SSO SDK demo PL/SQL application, which works fine when logged into Portal. However, when not logged into Portal, I receive the following errors:
"Error in application: missing application registration information
Please register this application as described in installation guide"
This error is driven by the PL/SQL exception:
"wwsec_sso_enabler_private.enabler_config_not_found"
What am I missing? I have created several Partner applications, and none of them appear in the WWSEC_ENABLER_CONFIG_INFO$ table. I have sucessfully loaded the SSOHash into my partner schemas.
Environment:
Win2000
Portal 3.0.7
Thanks in advance...
Dean

Paul,
Thanks for the info; however, I'm still unable to get the SSO SDK sample, or any partner app, to work.
I have read the docs, what little there is, and followed the steps closely. Everything executes ok.
I have several questions:
1. When executing the REGAPP.SQL script that comes with the SDK, it indicates to login as the partner schema. I have noticed when running this script, the entry is stored in the partner schema table WWSEC_ENABLER_CONFIG_INFO$, not the one owned by Portal. Is this correct?
2. My partner app is really a PL/SQL Server Page (PSP) application which uses the same server as Portal. When entering the Listener Token name, I have been using the same server name as Portal. Is this a problem? What is this token used for? Must it be unique for each partner application?
3. In your response you mentioned changes to the REGAPP script. I found no mention of any changes in the docs with SSO SDK. Am I missing something?
Finally, is there any better documentation for the SDK and/or partner application configuration. The readme and install files do not, in my opinion, pass as documentation.
Thanks...
Dean

Jabber 9.1 Registration To CUCM 8.6.2

Good evening,
I have a problem I am hoping someone can answer for me. I have a CUCM/ Unity Connection/ CUP platform which are all 8.6x
I have configured all the components and I am currently trying to get Jabber to work, I have 1 user who has 2 clients he wants to use. One client is is home Mac and the other his work Windows based laptop.
Jabber 8.6.4 on the Mac works 100% the client can call, access voicemail and use IM with no issues. The same user when he tries to login with his Windows based client gets IM and authenticates to Unity Connection OK but the client does not register with CUCM and therefore he cannot dial out and so all telephony functionality is unavailable. The options in the windows client only show Phone accounts for the voicemail server which all look OK.
It looks to me that the windows client is not getting the correct paramters from the jabber-xml file (infact I cant find one in the tftp server which is CUCM) or maybe I need to have 2 softphones detailed in CUCM, i.e one for each client (MAC & PC). I have all the CCMCIP and trunking etc working fine, along with the relevant AXL, LDAP and CTI users set up ok.
Anyone have an idea of where I may be going wrong ?
Thanks
S

Hi Jonathan
I have tried your suggestion but while the symptoms are slightly different I am still not able to get the Windows client to register with CUCM.
If I disable the softphone on the mac client then exit Jabber on the mac, then I open the Windows client initially the results are exactly the same. However if I then sign out of the windows client and back in I get the option on the bottom right of the client to choose the softphone source (i.e computer or deskphone) but then no matter which one I choose the client sits at the setting phone prompt and still does not register.
I guess one option for me may be to run a WIndows client on the home Mac using VMware fusion and use the same client, hopefully then the graceful softphone registration may work between devices running the same client?
Many thanks for your reply, very much appreciated.
Best
Steve

ISE 1.2 - Self-Provisioned devices still in pending registration status

Hi everybody,
I'm on ISE 1.2 patch 2, setting up single-SSID self-provisioning BYOD flow which works as expected except for a couple of issues:
first PEAP authorization always fails (no server certificate confirmation appears on device and no Endpoint Profile is assigned), second on goes through as expected and self-registration flow is started;
at the end of the flow, TLS certs are installed, device appears in endpoint database under user's account but "Device Registration Status" stays "pending" and this makes it impossibile to further authorized RegisteredDevices identity group;
single mobile devices gets different "Endpoint Profile" result at each subsquent access. For example: Android smartphones are profiled as Android or HTC device or HP devices or Samsung randomly.
I've tried to analyze log files but cannot extract a full dump of the profiling process that could help identify why all this happens.
Can you please help?
Regards,
L

Hi Kevin,
I did not find and answer. In subsequent patches the self-registration flow seems to have changed somehow and now I have more device in 'Registered' state, but still most of the time at the end of the process there is no guarantee that the devices will be in this stage. I've moved to more broad policies for authorization (i.e. if you have a valid certificate and login from one of the accepted profiles, we'll let you in).
Please let me know if you open a TAC case, what is the answer.
Regards,
L

TS4268 I have apple ID and when trying to sign in to use FaceTime,i always get registration error.how may you help me for that guys,thanks.

I have apple ID and when trying to sign in to use FaceTime,I always get error in registration,(This words always apper; The server encountered an error processing registration.Please try again later.)
Can I get your Advise on what to do? Thanks

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Unable to see the registration assessment for an applicant created.

We have a custom requirement to create an applicant through an interface program. So, We have developed a custom program to create applicant. The
applicant is getting created. Along with the applicant there is a requirement
to create vacancy assessment and registration assessment.
There is no standard API for creating these assessments. So, we are doing manual insert to the
tables. The vacancy assessment is working after insert form the interface. But
the registration assessment is not showing up.
I am inserting records in to the following tables:
ota_attempts
ota_utest_questions
ota_utest_responses
For the vacancy assessment that I am inserting through interface is showing up fine. Only the registration assessment is not showing up.
Is there any other data that needs to be inserted or updated for the registration assessment?
Edited by: user512779 on Apr 1, 2009 2:25 AM

We have a custom requirement to create an applicant through an interface program. So, We have developed a custom program to create applicant. The
applicant is getting created. Along with the applicant there is a requirement
to create vacancy assessment and registration assessment.
There is no standard API for creating these assessments. So, we are doing manual insert to the
tables. The vacancy assessment is working after insert form the interface. But
the registration assessment is not showing up.
I am inserting records in to the following tables:
ota_attempts
ota_utest_questions
ota_utest_responses
For the vacancy assessment that I am inserting through interface is showing up fine. Only the registration assessment is not showing up.
Is there any other data that needs to be inserted or updated for the registration assessment?
Edited by: user512779 on Apr 1, 2009 2:25 AM

How to transfer adobe acrobat XI registration from one desktop to another (bought new PC).

how do you transfer adobe acrobat XI registration from one desktop to another (bought new PC). Need to use ASAP!

Hi jaanders2,
The licensing agreement allows you to activate Acrobat on up to two computers. So, if you've only activated in your old computer, you simply need to install and activate Acrobat on the second computer. If you no longer have the installer file or installation media, you can download Acrobat from here: Download Acrobat products | Standard, Pro | XI, X - Adobe
If you need your serial number, this document will help you track it down: Find your serial number quickly - Adobe
And this document, will walk you through the activation process: Activation & Deactivation Help
Please let us know if you need additional help.
Best,
Sara

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

JaillotJb wrote:
I download the iOS7 Beta even if I was not a developper.
if you downloaded it and are not a developer, then we are not allowed to help you here. sorry.

LMS application registration problem

Hi,
I have a problem with the application registration of Campus Manager 5.2.1 under LMS 3.2.
Right now in the "Functional" tab of the LMS portal the "Campus Manager" view is empty.
In "Common Services" - "Server" - "Home Page Admin" - "Application Registration" Campus Manager is missing in the list of registered applications.
I can connect to the Campus Manager using the direct link http://<servername>:1741/campus/adminIntro.do.
The "CM" tab on the LMS portal page works.
I tried to register it this way:
In the CS Homepage Admin I click on "Register" - "Register from Templates" - "Next"
Then I get the list of templates. I select "Campus Manager" - "Next".
I enter these values:
Server name: fully qualified name of the server
Server Display Name: hostname of the server
Port: 1741
Protocol: http
When I click on "Next" - "Finish" the Campus Manager is not added to the list of registered application and I get no error message.
Did I enter wrong values? Where can I find corresponding log/debug messages?

It sounds like the CMIC database may be corrupt. There is a process to recover this, but it's somewhat complicated. If you open a TAC service request, your engineer can walk you through the process. This will clear out the CMIC database and reregister all applications. That should sort you out.

Cocoa Application Registration

hello,
just wondering: are there any online tutorials for creating a registration system for a cocoa application ? I've been googling and can't find any.
*looking specifically for info for how to generate a code based on the user's mac address, and then to generate a working auth code, which the app will use to unlock the app.

Hi
Thanks for your reply.
Now I have sucessfully created the plug-in and I have placed it in the internet - plugin directory as well. In addition to this I have configured the MIME type as well and set it to a custom type Simp. Now I want to try my plugin . How can I do this ? there is something given Here : http://developer.apple.com/DOCUMENTATION/InternetWeb/Conceptual/WebKitPluginProgTopic/Concepts/AboutPlugins.html#//appleref/doc/uid/30001248-198944
Where it asks to add a piece of code under OBJECT tags in the HTML page. then I opened this page in safari but the plugin was not called. . What should I do to get this called.
Thanks in advance
Best Regards
Sudeep

Partner Self-registration in Oracle B2B 10g

Hi B2B team,
Wanted to confirm from you if there is any provision for Partner self-registration in Oracle B2B 10g. We are on the latest patch. I am not aware of this functionality but wanted to get this confirmed from the product team.
Also, we will require a server restart when a new TP comes onboard in Oracle B2B 10g isnt it? Is my understanding correct or is there something we can do to overcome this?
Regards
Kavitha

Kavitha,
Drop a mail to B2B product dev team/PM to know more on this part. As far as I know there is no such facility in 10g. Yes, bounce may be required in case of certificate changes involved.
Regards,
Anuj

Application registration algorithm

I'm writing a small shareware app that I would ideally like people to register. This is the classic, if they send in the registration code 'xxxxxx', then I can send the unlock code 'YYYYY' situation.
Three criteria:
1) I would like the registrtaion code xxxxx to be unique. I am toying with the idea of storing the date in millisecs of when the app was first run on the system. If anyone has any better suggestions, I would love to hear them.
2) I would really like to have the algorithm myself. i.e. I don't plan to make enough off of this to be worth purchasing a library.
3) This does not need to be incredibly secure. Just enough to keep the casual person from
Does anyone out there have an algorithm they are willing to share to accomplish this?
Thanks all. This falls into the 'I know it has to be a known problem, but I'm not sure where to start' category.

Unless I am misunderstanding, I think that I'm addressing what you mentioned. Let me recap and see if I can make it more clear.
1) Client sends you an identifier and saves it to the client's disk.
String start = "" + System.currentTimeMillis();
start = start.substring( start.length() - 5, start.length() );
//this pulls off the last 6 numbers from the first run time and converts to a string.
// this is written to a file on the client side and then sent to me for registration.
2) You (the server) send back a hash of the identifier.
//registration app
String start = codeSentFromCustomer;
String superSecretDecoderString = "Secret Code";
start = start + superSecretDecoderString;
String result = MD5.getHashString( start );
result = result.substring( result.length() - 9, result.length() );
//this takes the 6 digits provided and appends "Secret Code".
// i.e. if the customer's code is "333232", then "333232Secret Code" is fed into MD5.
// I then send the customer the last 10 digits from my MD5 hash, say "1234567890" for simplicity sake
3) Clients types the unlock code ("1234567890") into the registration box, which is then saved to disk.
// to check on the unlock code's validity, I...
String superSecretDecoderString = "Secret Code";
String start = originalCodeFromAbove; //i.e. "333232" in this example
start = start + superSecretDecoderString; //now start = "333232Secret Code"
String result2 = MD5.getHashString( start );
result2 = result2.substring( result2.length() - 9, result2.length());
// I compare the result2 to the stored unlock code to make sure they are equal
// superSecretDecoderString is stored within the client and the registration prog's code. i.e.
// the customer never sees that string.
4) At each startup the client code checks the hash of sent ID against the return he has stored.
// run through the validation code detailed in #3.I think it addresses what you were referring to, but if it doesn't please tell me. It's my first crack at this sort of code, and I'd much rather discover any gaping holes now than later. :)
thanks again

SSO regapp registration with multiple net names

Hello!
I succesfully configured my apex engine to work with SSO authentication.
I used in regapp.sql
l_listener_token := 'HTML_DB:myhostname.mydomanin.com:7777';
and now the home page link works fine:
http://myhostname.mydomanin.com:7777/pls/htmldb/f?p=504:1
The problem is that I have some other network names (aliases) for the same IP (10.10.10.10) and I want these links to be functional as well:
http://myhostname2.mydomanin2.com:7777/pls/htmldb/f?p=504:1
http://10.10.10.10:7777/pls/htmldb/f?p=504:1
But when using them I get this error:
Error in portal_sso_redirect: missing application registration information:
p_partner_app_name:g_listener_token:HTML_DB:myhostname2.mydomanin2.com:7777
Please register this application as described in the installation guide
I tried to reuse the tokens I have for myhostname.mydomanin.com and register again regapp.sql with:
l_listener_token := 'HTML_DB:myhostname2.mydomanin2.com:7777';
But this violates unique constraint WWSEC_SECI_UK1 on WWSEC_ENABLER_CONFIG_INFO$.SITE_TOKEN column.
Question:
Is there a way to make functional the alternate links without getting new tokens (new SSO registrations to iAS)?
Thanks,
Sorin

Try this
Replace the < and > with their corresponding HTML escape characters , &lt an &gt (The escape characters need a trailing ; )
Under Column Formatting for this column
<a hre="mailto:#IDS#">#IDS#</a> varad

Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

Hi All,
I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
I have set the authentication scheme to Oracle Application server Single Sign On.
When i run the application i am getting the below error.
Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
Please help me to resolve this.
Thanks and Regards,
Suhas

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

SMQS registration

Similar Messages

Maybe you are looking for