SMQS transaction and Vertex calls timeout
Hi,
We just went live with one our SD projects. Before we went live we never had Vertex timeout issue, but after we went live we started getting 0 or 2 or sometimes 4 dumps in a day "CALL_FUNCTION_REMOTE_ERROR" The function where it dumps is RFC_CALCULATE_TAXES_DOC destination VERTEX. The description says "timeout during allocate" no connect of TP /usr/lpp/vertex/translink/verrfc from
host ansapap7 after 122 sec" .
RFC status: "CODE=CM_PRODUCT_SPECIFIC_ERROR CM_NO_STATUS_RECEIVED
CM_NO_DATA_RECEIVED SAPCODE=456 CONV=06153020"
RFC error text: "RFC_IO27"
CPI-C error text: "CPIC-CALL: 'ThSAPCMRCV'#Timeout during connection setup
(check that partner exists) "
Wierd thing is that it does not happen all the times. It happens 3 to 4 times in a day, sometimes it happens only once and sometimes does not happen at all.
I checked the SMQS transaction, it shows destination Vertex, max connection 1, max timeout 60. With this setting since last 3 + years we never had timeout issue, then why now when we have some 500 more orders being processed per day. These settings are still working for majority of orders, only some orders could pass through and get this dump.
Can someone guide me what this problem can be. Also can someone tell me is it safe to change the max connections and max timeout parameters in SMQS transactions and will changing those settings help in solving this.
Thanks in advance
Pulin
I had checked 645527 note also. We have not upgraded SAP since last 3 yrs. Its still 4.7, we have not applied any upgrade patches. It started happening after we went live on November 4th 06.
I think, this is some load distribution issue. Should I change the settings in SMQS transaction. Is that safe ?
If any one of you are using Vertex with SAP 4.7 or higher, then can you tell me what is present in table TTXC. Does this table contain old RFC calls(RFC_CALCULATE_TAXES1) or new RFC names(RFC_CALCULATE_TAXES_DOC).?
Similar Messages
-
Track changes to any field in Custom transaction and then call pop-up FM ?
Hi Friends,
I have created a custom transaction with 2 screens. Only if user has made some changes to any of the 40 fields in those 2 screens, I should ask user if they want to save by calling pop-up function module ? Rather than checking each field content with database content, is there any easy way to monitor the changes and call pop-up function module ?
Any help is suitably rewarded.
NiranjanThanks Amit for the reply.
I have 2 questions
1) Is there any easy way that SAP will keep track by itself, say in SYST structure, and I can just check in SY structure if something has changed ?
2) Along with 40 fields, I have 2 more sub-screens; Text editor AND table control. I need to check contents of these also and then call SAVE pop-up function module.
Pl let me know,
Niranjan -
Transactions and database locks
Hi,
We use Weblogic 4.5.1 on Windows NT 4.0 with Oracle 8.0.5. Our database
isolation is set to TRANSACTION_READ_COMMITTED. I have an entity bean with
TX_REQUIRED & TRANSACTION_READ_COMMITTED settings. If my client creates a
transaction, and starts calling methods on this entity bean, is the
corresponding database row locked for the duration of the transaction? We
have concurrent SQl-plus sessions going on and we want make sure there is
no data corruption. If the row is not locked, is it ok for me to explicitly
lock it from inside my entity bean?
Thanks,
Srini.
Hi. This should have been posted to the EJB or JDBC group, but I'll take it.
This is an Oracle question. If you have a transaction as you've described,
then the behavior will be exactly as if you had multiple SQL-PLUS sessions,
and in one of them, you did:
SQL> BEGIN;
-- do what your bean would do;
SQL> COMMIT;
You can test this there. In general, you'll find that Oracle's optimistic locking
will allow any number of simutaneous transactions to access a given row
at one time. Oracle does not lock the real data while a transaction is ongoing,
instead making a copy for the client to work off of. At commit time, depending
on the isolation level semantics, some or all of the transactions may fail when
Oracle tries to update the real data from the per-session private data.
I would council against running with SERIALIZABLE mode because there
is a serious bug in Oracle, where serializable transactions may fail silently.
Details on request.
Joe
Srini wrote:
> Hi,
> We use Weblogic 4.5.1 on Windows NT 4.0 with Oracle 8.0.5. Our database
> isolation is set to TRANSACTION_READ_COMMITTED. I have an entity bean with
> TX_REQUIRED & TRANSACTION_READ_COMMITTED settings. If my client creates a
> transaction, and starts calling methods on this entity bean, is the
> corresponding database row locked for the duration of the transaction? We
> have concurrent SQl-plus sessions going on and we want make sure there is
> no data corruption. If the row is not locked, is it ok for me to explicitly
> lock it from inside my entity bean?
>
> Thanks,
> Srini.
PS: Folks: BEA WebLogic is in S.F., and now has some entry-level positions for
people who want to work with Java and E-Commerce infrastructure products. Send
resumes to [email protected]
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component Architecture
http://weblogic.beasys.com/press/awards/index.htm
-
How to create bdc for fbs1 using both call transaction and session
Hi Friends,
i have one problem with tcode FBS1, i need to create a bdc program for both call transaction and session method using subroutine.
first call transaction needs to execute if there is an error sesion has to execute. if u have code please forward.
thanks in advance.
chandramouli pothuguntawhere as in call transaction we can do error handling explictly.those errors are stored in one file .this file will send to the error log(session method),i.e session log.
in the above case we use both call transaction n session method at time in one program.sample code is below ,go through it .
data : begin of itxk01 occurs 0,
end of itxk01.
data : bdcdata like itbdcdata occurs 0 with header line.
data : itbdcmsgcoll like itbdcmsgcoll occurs 0 with header line,
itxk01 like itxk01-dup occurs 0 with header line.
call gui-upload.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call transaction 'xk01' using bdcdata mode 'a' update 's' messages into itbdcmsgcoll.
if sy-subrc ne 0.
append itxk01 into itxk01-dup.
endif.
endloop.
if not itxk01-dup[] is initial.
refresh itck01.
call bdc_open_group
itxk01 = itxk01-dup.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call bdc-insert.
endloop.
call bdc-close-group.
form bdc-dynpr0 using pr sc
endform .
form bdc-field using fnam faval
endform.
this will help u.
reward points for me
kiran -
Call transaction and skip first screen
Hi,
I have a little but I think difficult problem
I have a selection screen and after that I call my dnypro. In this dynpro I can open a dynpro which looks like a popup where I have the possibility to call the same transaction with other input paramters.
the problem is when I make call transaction and want to go back I see the pop up dynpro which calls the transaction. so how can I close this popup dynpro by calling again transaction?I think I can't eyplain it.
Following. I have:
call transaction trans: selection screen calls dynpro 100, in dynpro 100 button with dynpro 200 with starting parameters.
dynpro 200 calls again transaction trans with skip first screen.
now I have displayed again dynpro 100 with new values. When I now want to go back I can see dynpro 200 which called the transaction. So how can I achieve this that dynpro 200 isn't shown when I go back ? -
CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'
Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy -
Call Transaction and skip first screen in SE37
Hi All,
I want call transaction SE37 and skip first screen of it. Is it possible through the statemen Call transaction 'SE37' and skip first screen ?.
Of course I have populated the parameter id 'LIB' before this statement but it is not working. Though I have found several posts with this solution but it's not working for me. Could anyone please let me know if this can be done using this statement or there are any other additions required along with this statement or it is not at all possible to achieve this functionality.
Thanks in advance !!.Solved! without a solution? very funny.
In somewhere of second screen related bdcdata, intensionlly make a mistake to force the system throws the error and the call the trasnaction with mode 'E'. This will solve the issue.
perform bdc_field using 'BDC_CURSO' " I removed letter R in 'BDC_CURSO'
'ISEG-ERFMG(01)'.
CALL TRANSACTION 'XXXX' USING BDCDATA MODE 'E'.
Thanks.
Suresh Yerra. -
Error in CALL TRANSACTION and SESSION Method
I have 8 records (1,2,3,4,5,6,7,8) to update into SAP database using CALL TRANSACTION and SESSION Method. If there is a error in 6th record. What happens in both call transaction and session method.
Please let me know which records will process and what about the error record. How to process only the error record if all other records have updated into database.Hi Patil_sumeet,
if your code for this is not protected secret of some federal agency, you may read [How to post code in SCN, and some things NOT to do...|How to post code in SCN, and some things NOT to do...; and then post relevant lines here.
According to the facts presented until know it may have been better to ask Radio Eriwan
Regards
Clemens -
RFC function module with call transaction and Import memory ID
Hi,
I am calling RFC function module from R/3 which exists in BW.
In BW stand alone function module works fine.
When I am Calling from R/3 it is not working,
Can you tell me is it because of the below code, And suggest if any corrections required.
I am calling the call transaction and using EXPORT memory iD inside the program
and IMPORT in after that.
And populating RFC table's table " p_i_tcode_user" finally.
set parameter id 'TCD' field p_tcode.
call transaction 'Z_BW_RSUSR002' AND SKIP FIRST SCREEN.
ENDIF.
get the final user data from submitted program
import gt_users_complete from memory id tcode_userid.
LOOP AT gt_users_complete.
lwa_tcode_user-tcode = p_tcode.
lwa_tcode_user-uname = gt_users_complete-Bname.
APPEND lwa_tcode_user TO p_i_tcode_user.
ENDLOOP.
Thanks,
Veerendra.HI,
Can you just exaplin it clearly plz..
Thanks
Mahesh -
How to call a SM35 transaction and run in BDC report.
Hi Experts,
I knew that how to call a transaction but here, I've to call the SM35 transaction ,which have my BRS BDC recording, to run my session.
Pls help me how to call the transaction and run/process the first session tab in the table control of SM35 window.
thanks & regards
sankar.Hi,
Look up this example..here v have recorded one transaction & running it throough BDC report programming.
report ZBDC_16JUL2008
no standard page heading line-size 255.
include bdcrecx1.
DATA : BEGIN OF it_tab OCCURS 0,
LIFNR(016),
BUKRS(004),
KTOKK(004),
NAME1(035),
SORTL(010),
STRAS(035),
PFACH(010),
ORT01(035),
LAND1(003),
REGIO(003),
SPRAS(002),
TELF1(016),
AKONT(010),
FDGRV(010),
END OF it_tab.
start-of-selection.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = 'D:\'
FILETYPE = 'ASC'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
data_tab = it_tab
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
LOOP at it_tab.
perform bdc_dynpro using 'SAPMF02K' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_tab-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
it_tab-BUKRS.
perform bdc_field using 'RF02K-KTOKK'
it_tab-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELF1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
it_tab-NAME1.
perform bdc_field using 'LFA1-SORTL'
it_tab-SORTL.
perform bdc_field using 'LFA1-STRAS'
it_tab-STRAS.
perform bdc_field using 'LFA1-PFACH'
it_tab-PFACH.
perform bdc_field using 'LFA1-ORT01'
it_tab-ORT01.
perform bdc_field using 'LFA1-LAND1'
it_tab-LAND1.
perform bdc_field using 'LFA1-REGIO'
it_tab-REGIO.
perform bdc_field using 'LFA1-SPRAS'
it_tab-SPRAS.
perform bdc_field using 'LFA1-TELF1'
it_tab-TELF1.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-VBUND'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'LFB1-AKONT'
it_tab-AKONT.
perform bdc_transaction using 'FK01'.
ENDLOOP.
perform close_group. -
I want to use both call transaction and session method in the same
Hi,
1. I want to use call transaction and session method in a single trans..how to do?
2. I have 1000 records in it 500 records is updated using call transaction remaining 500 i hve to update with session how to do?
3. Multiple transaction is possible in call transaction how?I suggest you try fulfilling your requirements yourself and come back with specific problems along the way.
-
Can we record two transactions and use for a Call-transaction BDC?
can we record two transactions and upload data using Call-transaction method in BDC ?IF not why?
Hi Prakash,
Here i used two transactions.
REPORT zra_gl_cr NO STANDARD PAGE HEADING LINE-SIZE 255.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
DATA:messtab1 LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
DATA:messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_mess OCCURS 0,
l_mstring(480),
msgnr(5),
msgv1(15),
END OF i_mess.
DATA:i_mess1 LIKE i_mess OCCURS 0 WITH HEADER LINE.
DATA: l_mstring(480),l_mstring1(480).
DATA: BEGIN OF it_itab OCCURS 0,
saknr(10), "G/L a/c number.
bukrs(4), "Company Code.
ktoks(4), "G/L a/c group.
xplacct(1), "P&L statement account.
xbilk(1), "Balance sheet account.
txt20_ml(20), "G/L a/c short text.
txt50_ml(50), "G/L a/c long text.
waers(5), "Account currency.
MWSKZ(2),
mitkz(1), "Reconciliation a/c for a/c type.
xopvw(1), "Open item management
xkres(1), "Line item display.
zuawa(3), "Sort Key.
fstag(4), "Field status group.
xintb(1), "Post automatically only.
hbkid(5), "House bank.
hktid(5), "Account id.
vzskz(2), "Interest indicator
END OF it_itab.
DATA: hdate LIKE sy-datum.
Selection Screen *****
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(15) text-103. " FOR FIELD P_FILE1.
SELECTION-SCREEN POSITION 25.
PARAMETERS : p_file1 LIKE rlgrap-filename.
SELECTION-SCREEN END OF LINE.
Initialization *****
INITIALIZATION.
At Selection Screen *****
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
Perform file_selection will help to select the location of the file
PERFORM file_selection.
Start-Of-Selection *****
START-OF-SELECTION.
Perform data_upload will help to upload the data from the flat file
to the internal table.
PERFORM data_upload.
PERFORM open_group.
Peform bdc_upload will help to upload the data from the internal
table into its respective fields.
PERFORM bdc_fspo.
PERFORM bdc_upload.
PERFORM exp_log.
PERFORM close_group.
Perform display_log will prepare a log for the data that has been
uploaded
PERFORM display_log.
End-Of-Selection ****
END-OF-SELECTION.
*& Form file_selection
To select the location of the file
FORM file_selection .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ' '
def_path = 'C:\'
mask = ',.txt,.xls.'
mode = 'O'
title = 'Open a excel file'
IMPORTING
filename = p_file1
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
ENDFORM. " file_selection
*& Form data_upload
To upload the data from the file location to the internal table.
FORM data_upload .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file1
TABLES
i_tab_converted_data = it_itab
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " data_upload
*& Form bdc_upload
To upload the data from the internal table into its respective fields.
FORM bdc_upload .
LOOP AT it_itab.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=ACC_CRE'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_KEY-SAKNR'.
perform bdc_field using 'GLACCOUNT_SCREEN_KEY-SAKNR'
it_itab-SAKNR.
perform bdc_field using 'GLACCOUNT_SCREEN_KEY-BUKRS'
it_itab-BUKRS.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=2102_GROUP'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-XPLACCT.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=2102_BS_PL'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-XBILK'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-XPLACCT.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-XBILK.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=ENTER'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-XBILK.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT20_ML'
it_itab-TXT20_ML.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT50_ML'
it_itab-TXT50_ML.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-BILKT'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'
it_itab-saknr.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=TAB02'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-ktoks.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'
it_itab-txt20_ml.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'
it_itab-txt50_ml.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-BILKT'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'
it_itab-saknr.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=TAB02'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-XBILK.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT20_ML'
it_itab-TXT20_ML.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT50_ML'
it_itab-TXT50_ML.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'
it_itab-saknr.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=ENTER'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-WAERS'
it_itab-waers.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MWSKZ'
it_itab-MWSKZ.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MITKZ'
it_itab-mitkz.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-XOPVW'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XOPVW'
it_itab-XOPVW.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XKRES'
it_itab-XKRES.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
it_itab-ZUAWA.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-xplacct.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-xbilk.
IF it_itab-xbilk = 'X'.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=TAB03'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-WAERS'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-WAERS'
it_itab-waers.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XOPVW'
it_itab-xopvw.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-MITKZ'
it_itab-mitkz.
ENDIF.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XKRES'
it_itab-xkres.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
it_itab-zuawa.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-FSTAG'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-FSTAG'
it_itab-fstag.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XINTB'
it_itab-xintb.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-HBKID'
it_itab-hbkid.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-HKTID'
it_itab-hktid.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-VZSKZ'
it_itab-vzskz.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=TAB03'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-WAERS'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-WAERS'
it_itab-WAERS.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MWSKZ'
it_itab-MWSKZ.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MITKZ'
it_itab-MITKZ.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
it_itab-ZUAWA.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=ENTER'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-FSTAG'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'
it_itab-FSTAG.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-FSTAG'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'
it_itab-FSTAG.
PERFORM bdc_transaction USING 'FS00'.
CALL TRANSACTION 'FS00' USING bdcdata MODE 'A'
UPDATE 'S'
MESSAGES INTO messtab1.
PERFORM mess1.
REFRESH bdcdata[].
ENDLOOP.
ENDFORM. " bdc_upload
*& Form bdc_fspo
text
FORM bdc_fspo .
LOOP AT it_itab.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ACC_CRE'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_KEY-SAKNR'
it_itab-saknr.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_KEY-KTOPL'
'1000'.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=2102_GROUP'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-ktoks.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-xplacct.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-xbilk.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-ktoks.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-xplacct.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-TXT50_ML'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'
it_itab-txt20_ml.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'
it_itab-txt50_ml.
*perform bdc_transaction using 'FSP0'.
CALL TRANSACTION 'FSP0' USING bdcdata MODE 'A'
UPDATE 'S'
MESSAGES INTO messtab.
PERFORM mess.
REFRESH bdcdata[].
ENDLOOP.
ENDFORM. " bdc_fspo
*& Form mess
text
--> p1 text
<-- p2 text
FORM mess . "fsp0
LOOP AT messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = messtab-msgid
lang = messtab-msgspra
no = messtab-msgnr
v1 = messtab-msgv1
v2 = messtab-msgv2
v3 = messtab-msgv3
v4 = messtab-msgv4
IMPORTING
msg = l_mstring
EXCEPTIONS
not_found = 1
OTHERS = 2.
CONDENSE l_mstring.
i_mess1-l_mstring = l_mstring(250).
i_mess1-msgnr = messtab1-msgnr.
i_mess1-msgv1 = messtab1-msgv1.
APPEND i_mess1.
ENDLOOP.
ENDFORM. " mess
*& Form mess1
text
--> p1 text
<-- p2 text
FORM mess1 . "fs00
LOOP AT messtab1.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = messtab1-msgid
lang = messtab1-msgspra
no = messtab1-msgnr
v1 = messtab1-msgv1
v2 = messtab1-msgv2
v3 = messtab1-msgv3
v4 = messtab1-msgv4
IMPORTING
msg = l_mstring1
EXCEPTIONS
not_found = 1
OTHERS = 2.
CONDENSE l_mstring1.
i_mess-l_mstring = l_mstring1(250).
i_mess-msgnr = messtab1-msgnr.
i_mess-msgv1 = messtab1-msgv1.
APPEND i_mess.
ENDLOOP.
ENDFORM. " mess1
*& Form exp_log
text
--> p1 text
<-- p2 text
FORM exp_log .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:\temp\error_fsp0.txt'
filetype = 'DAT'
TABLES
data_tab = i_mess1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:\temp\error_fs00.txt'
filetype = 'DAT'
TABLES
data_tab = i_mess.
ENDFORM. " exp_log
*& Form bdc_dynpro
text
-->PROGRAM text
-->DYNPRO text
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_Field
********Rewards some points. -
How to decide between call transaction and session methods.which one to use for data transfer?
and how to schedule session method in background mode?
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Nov 23, 2009 9:38 AMHi Kiranmayi,
1. It depends on various factors
a. As per the requirement mentioned in TDD
b. If user/Clnt needs the Error Log to be displayed in specific format.
since, In u2018Call Transactionu2019, the transactions are triggered at the time of processing itself and so the ABAP
program must do the error handling.
c. We can update the database both synchronously and asynchronously. We can specify the mode in the program.
Faster than session method if uses Asynchronous update.
2. Whenever there is large no of records need to be processed and user interaction is not required then you canschdule the
program to run in Background.
In session method you can submit the session in background job using 'RSBDCSUB'.
syntax:
SUBMIT (SUBREPORT)
USER SY-UNAME
VIA JOB JNAME
NUMBER JNUMB
WITH QUEUE_ID EQ QID
WITH MAPPE EQ GROUPID
WITH MODUS EQ 'N'
WITH LOGALL EQ LMODUS
AND RETURN.
Note: You can refer the sdn site for further more details -
What is the diffreence between call transaction and session method
hi gurus
can any one suggest me
what is the difference between call transaction and session methods
in which cases we have to use teh call transaction and
in which cases we have to use session method.
thank you
regards
kals.CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Regards,
Sunil Kumar Mutyala -
Main diff between call transaction and session method
hi frnds.
my friend went for an interview they asked her whts the diff between call tran adn session?
she told more thn one transaction we can call for an session she told itseems. but he told tht by cal tran also u cn call more thn one tran it seems... so please canu help me out regarding this question? how we hve to tell in interview?
in advance thanks....Hi
Batch Input and CALL TRANSACTION are both data transfer methods. Batch Input usually are used to transfer large amount of data. For example you are implementing a new SAP project, and of course you will need some data transfer from legacy system to SAP system. If there is no standard batch input program, direct input program, you would need to write your own data transfer program and it is going to be batch input program. CALL TRANSACTION methods is real-time method, whenever you run the program CALL TRANSACTION can be triggered. CALL TRANSACTION is used especially for integration actions between two SAP systems or between different modules. Users sometimes wish to do something like that click a button or an item then SAP would inserts or changes data automatically. Here CALL TRANSACTION should be considered. You use CALL TRANSACTION and you do everything automatically, collect necessary data, call transaction and so do database update. If any error occurs, show the user them.
Batch Input
With the Batch Input method, an ABAP program reads the external data that is to be entered in the R/3 System and stores the data in a batch input session. The session records the actions that are required to transfer data into the system using normal SAP transactions.
When the program has generated the session, you can run the session to execute the SAP transactions in it. You can explicitly start and monitor a session with the batch input management function (by choosing System - Services - Batch Input), or have the session run in the background processing session.
It offers management of sessions, support for playing back and correcting sessions that contain errors, and detailed logging. Your program prepares the data and stores it in a batch input session. A session is a collection of transaction data for one or more transactions. Batch input sessions are maintained by the system in the batch input queue. You can process batch input sessions in the background processing system.
Your program must open a session in the queue before transferring data to it, and must close it again afterwards. All of these operations are performed by making function modules calls from the ABAP program.
The most important aspects of the session interface are:
Asynchronous processing
Transfer data for multiple transactions
Synchronous database update. During processing, no transaction is started until the previous transaction has been written to the database.
A batch input processing log is generated for each session
Sessions cannot be generated in parallel. The batch input program must not open a session until it has closed the preceding session.
CALL TRANSACTION
In the second method, your program uses the ABAP statement CALL TRANSACTION USING to run an SAP transaction. External data doesnt have to be deposited in a session for later processing. Instead, the entire batch input process takes place inline in your program. With CALL TRANSACTION USING, the system process the data more quickly than with batch input sessions. Unlike batch input sessions, CALL TRANSACTION USING does not automatically support interactive correction or logging functions.
Your program prepares the data and then calls the corresponding transaction that is then processed immediately.
The most important features of CALL TRANSACTION USING are:
Synchronous processing
Transfer of data from an individual transaction each time the statement CALL TRANSACTION USING is called
You can update the database both synchronously and asynchronously. The program specifies the update type.
Separate LUW (Logical Units of Work) for the transaction. The system executes a database commit immediately before and after the CALL TRANSACTION USING statement.
No batch input processing log
Maybe you are looking for
-
Final Cut Studio (ver 1.0) won't install on brand new 2.8 ghz intel coreduo
I just bought a new 15inch MacBook Pro (4 GB memory) and went to install Final Cut Studio (ver 1.0) and then install the Final Cut Studio (HD) upgrade, but when I try to install Final Cut Studio (ver 1.0) I get this error: "Your computer does not hav
-
Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anythi
-
Get PIN for unlimited music access
Hi, What are steps to get PIN for Nokia 1020. When i login with my nokia account i get a message saying this account belongs to another territory. So tried creating a new account. but it asks for PIN which i donot have. I would like to generate a new
-
How to set different Icons for Jtreenode
How to set different Icons for Jtreenode,i want to set icons for jtreenode,not only for leaf,open,closeicon,i hope that each node has a different icon.Thanks!
-
Apple Mail or Thunderbird for hotmail?
I'm considering receiving and sending hotmail emails on my Mac without using my ISP account. Which application is better for this purpose, Apple Mail or Mozilla Thunderbird? What are the pros and cons? Thanks in advance. Message was edited by: KenWon