SMS 2003 and ZFD 3.2 and/or 7.x interoperability

I'm forced to use SMS 2.0 on my ZFD 3.2 workstations, as our parent
company mandates it. So far, we've been able to cooperatively exist
together, but, I now have to upgrade to SMS 2003 (and, am also trying to
upgrade ZFD to 7.x).
Anybody have experience with SMS 2003 and the "advanced SMS client" (SMS
2.0 usese the "legacy" client)? Can I expect no issues, or...
Thanks!

Thanks, Craig!
"craig wilson" <[email protected]> wrote in message
news:pJ%kf.2300$[email protected]..
>
> I am not aware of any and but I do recall in the past there being an
> "issue"
> that Novell addressed.
> Hence if one were to appear, I presume Novell would again be willing to
> look
> at the issue and address it if it was really their issue to address.
>
>
> <[email protected]> wrote in message
> news:VY_kf.2245$[email protected]..
>> I'm forced to use SMS 2.0 on my ZFD 3.2 workstations, as our parent
>> company mandates it. So far, we've been able to cooperatively exist
>> together, but, I now have to upgrade to SMS 2003 (and, am also trying to
>> upgrade ZFD to 7.x).
>>
>> Anybody have experience with SMS 2003 and the "advanced SMS client" (SMS
>> 2.0 usese the "legacy" client)? Can I expect no issues, or...
>>
>> Thanks!
>
>

Similar Messages

SQL Query (Migrating report from SMS 2003 and SCCM 2012R2)

Hello everyone,
I solicit you because I have to work on migrating reports from SMS 2003 and SCCM 2012 R2.
The following SQL query causes me some problems:
SELECT DISTINCT SYS.Netbios_Name0 AS Computer, (SELECT SUM(ProcAddtl.NumberOfLogicalProcessors0) FROM v_GS_Processor_Addtl0 ProcAddtl WHERE ProcAddtl.ResourceID=SYS.ResourceID) [Cores], CS.NumberOfProcessors0 AS CPU, CPU.MaxClockSpeed0 As Speed, CPU.Name0, MEMORY.TotalPhysicalMemory0/1024 AS [RAM Mb], (SELECT LDISKS.Name0 + '=' + CONVERT(varchar(15), LDISKS.Size0/1024) + ' | ' as 'data()' FROM v_GS_LOGICAL_DISK LDISKS WHERE LDISKS.ResourceID=SYS.ResourceID AND (LDISKS.Name0='C:' OR LDISKS.Name0='D:') ORDER BY LDISKS.Name0 FOR xml path('')) [Logical Disk (Gb)], (SELECT LDISKS.Name0 + '=' + CONVERT(varchar(15), LDISKS.FreeSpace0/1024) + ' | ' as 'data()' FROM v_GS_LOGICAL_DISK LDISKS WHERE LDISKS.ResourceID=SYS.ResourceID AND (LDISKS.Name0='C:' OR LDISKS.Name0='D:') ORDER BY LDISKS.Name0 FOR xml path('')) [Free Space(Gb)],CS.Manufacturer0 AS Manufacturer, CS.Model0, OS.Caption0 AS 'OS', (SELECT CONVERT(varchar(10), NIC.Index0) + '=' + NIC.IPAddress0 + ' | ' as 'data()' FROM v_GS_NETWORK_ADAPTER_CONFIGUR NIC WHERE NIC.ResourceID=SYS.ResourceID FOR xml path('')) [Network], (SELECT Count(Name0) FROM v_GS_SCSI_CONTROLLER SCSI WHERE SCSI.ResourceID=SYS.ResourceID AND SCSI.Name0 Like '%Qlogic%') [# FC HBA], INFONOYAU.RoleServeur0 AS Role, INFONOYAU.Zone0 AS Zone
FROM v_R_System SYS
LEFT JOIN v_GS_COMPUTER_SYSTEM CS ON CS.ResourceID = SYS.ResourceID
LEFT JOIN v_GS_PROCESSOR CPU ON CPU.ResourceID = SYS.ResourceID
LEFT JOIN v_GS_X86_PC_MEMORY MEMORY ON MEMORY.ResourceID = SYS.ResourceID
LEFT JOIN v_GS_OPERATING_SYSTEM OS ON OS.ResourceID = SYS.ResourceID
LEFT JOIN v_GS_Informations_Noyau0 INFONOYAU ON INFONOYAU.ResourceID = SYS.ResourceID
LEFT JOIN v_FullCollectionMembership COL ON COL.ResourceID = SYS.ResourceID
WHERE COL.CollectionID = @CollectionID ORDER BY SYS.Netbios_Name0
Can a charitable soul help me to migrate this query to a SCCM 2012R2 report?

The following SQL query causes me some problems:
Why? What's happening?
Torsten Meringer | http://www.mssccmfaq.de

System Management container already existing from SMS 2003

I am going to be introducing a new SCCM 2012 R2 server in our domain which has an existing SMS 2003 server. The first part of the SCCM 2012 R2 preparation is (from my understanding) is to create the "System Management" container using ADSIEdit
and give permission to the service account you create for SCCM.
As we already have SMS 2003 this container exists in our Active Director. Given this what is the proper procedure? Do I simply give permission for this container to the SCCM service account and that is it? What about the already existing items in this container
for our existing SMS server, will they be adversely affected or conflict with the newly created items?

Yes, simply assign permissions for your ConfigMgr 2012 site system(s) to that container. It won't touch the existing objects.
Do pay attention to overlap in boundaries, inc ase you use the boundaries for auto site assignment. See also:
http://social.technet.microsoft.com/Forums/en-US/18b93c00-1a6a-48bc-b19f-f17bfbcffb0f/sms-2003-and-sccm-2012-overlapping-boundaries?forum=configmanagerdeployment
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Lost SMS Icon and get error message Uncaught exception Index 20 = 20

Dear All
I have lost my SMS Icon and looking at previous forums have carried out the following techniques which do not work
1. I have gone to Messages - Options - SmS & Email Inboxes - Seperate but this does not solve anything
Within this step i have switched off phone taken out battery etc...
2. I have gone to Applications - menu - "show all" but my SMS icon cannot be found
Just to note even when i go to Messages - View Folder - SMS Inbox .....i get the error message again
Uncaught exception Index 20 > = 20
Anyone able to help ? Would be greatly appreciated.
Thanks

You may have already figured out your fix - but yesterday I went thru the same thing with my son's phone. Overnight he lost his SMS & MMS Icon and was receiving Uncaught Exception Index 28 >= 28. I called Verizon Tech Support and was told there was a corrupt file in the calendar.
We backed up the phone using the Desktop Manager - performed a security wipe and restored his phone.
His phone is back up and running as it should be. Hope this helps.
Laura

Blackberry 8310 Curve randomly deletes text/sms messages and phone logs

Why does this keep happening to me?
There are times that my phone goes over a week without it happening and then there are times like today it has happened three times.
I will have maybe 5 ot 6 text messages in my inbox and maybe 2 or 3 emails and I get a phone call and POOF the text messages and phone logs are gone!
I have repeatedly lost important text messages and numbers from my call log.
The tech support excuse for it is that I have too many messages in my inbox which causes it, but 6 sms messages and 3 emails is too much?
I have tried everything (updating the desktop software, updating all of the settings NOT to delete messages until i delete them, hard booting my phone once a day, etc..) and it still does it.
This also used to happen with my Blackberry Pearl.
If I can't get it resolved, I will just switch to the iPhone. I can deal with the randomly dropped calls, but constantly loosing my call logs and text messages is BEYOND frustrating and Blackberry tech support has been no help!.
Solved!
Go to Solution.

DCmuseum,
Hi,
You have low free memory left on your device.
Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
I do not know your experience level, so if you know this I'm sorry but please read and let me
know if this applies.
Most people close the applications by pressing the escape or red key. This does not close the applications.
Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory.
Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes.
you will have an icon on you screen for memory cleaning make sure you press it. Make sure you use the CLOSE button each time you are done with an application.
Read the link below and follow each step that Tanzim outlines,
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=9225#M9225
If you follow these steps and keep up with your memory your phone will operate smoothly.
Please let us know if you need help with any of the steps.
Thanks
Message Edited by Bifocals on 09-07-2008 11:58 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Cant Edit Message Body (outlook 2003 and 2007), Cant select text VIA click (word), Cant Edit Advanced Options (word)

A number of my users are having similar problems across the entire network. These issues have started on 8/26/2014
This problem is not localized to a specific outlook version, the problem is happening on 2003 and 2007 alike. Also this problem is starting to move into MS-Word.
In outlook i am unable to click the message body. If i click the message body nothing happens. I cannot select any text, type, or anything in the message body. I am however able to type in the message body if i press the 'tab key' and navigate to the message
body.
I have wiped out profiles. reset all user settings, changed datafiles etc. Nothing i do seems to affect this problem.
On microsoft word i am unable to edit a number of documents. These documents are readable, editable etc on different computers. There are not any protections on the files. The user who reported this problem is however unable to edit the text even though
others are able to. To correct this problem we have protected and unprotected the file checked permissions all with no luck.
On the same computer i am unable to change any advanced options. When i attempt to click the listing nothing happens. Its acting in the same manner as outlook is described above. However i am unable to select anything using the 'tab' key.
These problems started on a few different computers, but is beggining to spread and affect more users across the network.
This also does not seem to be a group policy issue. We have a number of different user groups on the network, and this problem is not isolated to any specific user, or group, group member etc..
Thanks in advance to anyone who might be able to lend some assistance to solve this matter.
X

Hi,
Please first verify the activation status of your Microsoft Office.
If your Microsoft Office is activated, please try to start Outlook or Word in safe mode to check if this issue persists. To do this, press Windows key + R to open the Run command, type
outlook /safe and press Enter.
Also please try to run a repair of your Office installation to check the result. See:
http://support.microsoft.com/kb/924614
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

On 6u13, new plug-in fails to load on Windows 2003 and IE7

I'm attempting to load an applet in IE7 with an OBJECT tag in Windows 2003. This is a mature product that has, for this release, moved from 5 to 6. The CLSID was changed from the CAFEEFAC one for any version of 5 to the one for any version of 6. Java 5 version worked fine on Windows 2003. Now, on some, but not all, of our 2003 systems the ActiveX control for the new Java Plug-in fails to load.
These configurations work:
- Windows XP and any Java and any IE
- Windows 2003 and Java5 and any IE
- Windows 2003 and Java6, old plug-in, and any IE
- Windows 2003 and Java6 and APPLET tag and any IE
This one doesn't...on some machines:
- Windows 2003 and Java6, new plug-in, IE7, OBJECT tag
This is not a security problem. If I turn off the new style plug-in in the control panel, it works. However, I'd really like to avoid doing this, as the new plug-in has much needed features. Also, the APPLET tag works where the OBJECT tag doesn't. I can implement this change if needed, but it would be fairly painful and I'd prefer to avoid it.
Does anyone know why this might be happening? Is there a good way for me to diagnose this? The browser is quite silent as to what the error might be.
I appreciate any help. This one is truly vexing me!

Okay, I'm wrong...I thought I could move to APPLET tags...I cannot. LiveConnect from JavaScript to Java does not support APPLET tags, only OBJECT tags. This makes my problem worse, as I don't have any recourse so far, except to disable the new plugin.
However, this did lead to a clue: disabling the new plugin caused it to work again. When the new plugin was re-enabled to see it fail again, much to my surprise, it worked! Does anyone know what flipping that option actually does? Registry change or something else?

SAP Business One 8.8 PL 12 of Windows 2003 and SQL 2003

Dear All,
My client has a present server with windows server 2003 and SQL server 2003 installed can we succesfully install SAP Business One 8.8 PL 12 and Higher PL OR will it be a constrain.

Hi,
Let me rephase my QUES
My client has a server with the following installations
windows server 2003 (5 CAL)
MS SQL 2003
We will be installalling SAP Business One 8.8 PL 12 on the server
are ther any issues for installing SAP 8.8 on MS Server 2003 and SQL 2003
or do we need higher Version I mean (windows 2005 or windows 2008)

Microsoft Exchange Server 2003 and Windows 8 Compatibility

Is there a fix or workaround for accessing email via Outlook 2013 (Windows 8) when your company uses Microsoft exchange server 2003 and has not plans on upgrading it any time soon. I am a remote employee so I am the only one that has this problem in the
company. I can access email through an owa account but it's a pain. I tried to set up a rule to have all incoming mail forwarded to my gmail account in Outlook 2013, but that did not work. Any other ideas?

If server has enabled ActiveSync you can use Windows 8 Mail Client - works almost like Outlook.
AFAIR Outlook 2013 can't work with Exchange 2003.
Regards, Konrad Sagala, MCT, MCSE+M, MCITP: Exchange 2007/2010, Lync 2010, Office365, Windows 2008, Virtualization

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the "saved" ones before I write the new one. What to do to finally/definitely delete the save

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the “saved” ones before I write the new one. What to do to finally/definitely delete the save message?

sorry it's ios6

Windows 2003 and windows 7 access compability

Hi,
I am now using IBM server with windows 2003 32 bit operating system and clients are windows xp and windows 7. I want to know that if I convert all clients to windows 7. Is there any connectivity/accessing issues to server.
Is there any compability / accessing issues within windows 2003 and windows 7?
Thanks in advance

Hello,
Windows Server 2003 is going out of support 2015.
Windows 7 works together with it without problems.
If this is a domain you have to be aware that GPO settings for Windows 7 should be configured from a Windows 7 machine with RSAT installed, otherwise lot of settings are not available within Windows Server 2003.
Also you have to think about server stored profiles, if used, as the .V2 profiles are used with Windows 7 and the older profiles will not work for users logging on to the Windows 7 machines.
Maybe there is more to consider but therefore the information you have provided is too less.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Crystal 8 Web Component Server ond Windows Server 2003 and IIS 6

I am trying to get Crystal 8 Web Component and Page Server to run on Windows 2003 Server with IIS 6. I have done the following:
Added the .cri and .rpt ISAPI extension mappings
Have Cache ISAPI extentions selected
Deselected "verify that file exists"
Aded the .cri and .rpt MIME types
Added wcsinsapi.dll as a IIS 6.0 extension
The above resolved all HTTP 40x.x errors but when trying to access a report from IE I receive the following error:
Error: Could not connect to the Web Component Server.
The page server and web component server services are running and I do see the listen ports (6401, 6403) active.
I know this is old software but it works quite well under a Windows 2000 Server and other web postings indicate that it is possible to run Crystal 8 under WS2003 and IIS 6.
Does any one know of a white paper/support document that details how to run Crystal 8 under Windows Server 2003 and IIS 6?
Has any one done this successfully?
Any tips as to cause of the "Could Not Connect" problem would be greatly appreciated.

Well as it turns out it looks like it was just this server.
We tried everything, and I added those user accounts to full
permission for the Coldfusion folders and we just could not get it
to work. We tried it on another couple servers running 2003, and it
installed perfectly right out of the box with no other permissions
needed. And those servers were all running default configs with no
other permissions done.
We still have no idea what was the problem, but at least for
now it seems to be this server. But I will tell you what, that II6
stuff seems to be a bit of a pain, we had major problems installing
new version of PHP with it too. Oh well, good luck to you
too!

Out of memory using Windows Server 2003 and Oracle 9.2.0.3

Hi,
I just installed both Windows Server 2003 and Oracle 9.2.0.3. The server I am using has 4 gigabytes of memory installed, and windows shows that to be the actual physical memory on the server. The paging file is 8 gigabytes for a total of 12 gigabytes of virtual memory.
Using the Oracle Database Configuration Assistant, I create a new database using default values. After verifying the installation worked OK (database started, queries ran), I attempted to change some of the memory parameters and was able to start the database using about 1.4 gigabytes of total SGA, with the O/S using about .3 gigabytes for a total of 1.7 gigabytes. I then attempted to change the buffer cache + 1 gigabyte for a total of 2 gigabytes. Now the database will not start and I get an out of memory error ora-27102 with an additional O/S memory error of "O/S Error: (OS 8) Not enough storage is available to process this command".
So, I have two problems:
1) With 4 gigabytes installed, and the O/S using only about 300 megabytes, why isn't Oracle able to take advantage of the memory on this machine past the 1.7 gigabytes (as reported by Windows task manager).
2) How do I change the spfile memory parameters so the database will start using spfile? I can start the database pointing to a pfile with lesser memory parameters, but I don't know how to effect change on the spfile, since I cannot start with the spfile.
Both these technologies (9.2.0.3 and Server 2003) are new to me, so any insight would be appreciated!
HERE ARE THE SPFILE PARAMETERS THAT WORKED:
SGA (M)
Shared Pool=104
Buffer Cache=960 ***
Large Pool=0
Java Pool=64
Total SGA=1128
SGA Max Size=1321
Aggregate PGA Target=1500
Current PGA Allocated=22868KB
WINDOWS MEMORY INFO FROM TASK MANAGER SHOW:
PF Usage=1.66GB
Physical Memory (K)
Total=4062704
Available=3203460
System Cache=2499096
Commit Charge (K)
Total=1748184
Limit=12288628
Peak=1925276
*** When I change this to 2048 the database did not start.
Thank you.

CREATE SPFILE
Purpose
Use the CREATE SPFILE statement to create a server parameter file from a client-side initialization parameter file. Server parameter files are binary files that exist only on the server and are called from client locations to start up the database.
Server parameter files let you make persistent changes to individual parameters. When you use a server parameter file, you can specify in an ALTER SYSTEM SET parameter statement that the new parameter value should be persistent. This means that the new value applies not only in the current instance, but also to any instances that are started up subsequently. Traditional client-side parameter files do not let you make persistent changes to parameter values. Because they are located on the server, these files allow for automatic database tuning by Oracle and for backup by Recovery Manager (RMAN).
To use a server parameter file when starting up the database, you must create it from a traditional text initialization parameter file using the CREATE SPFILE statement.
All instances in an Real Application Clusters environment must use the same server parameter file. However, when otherwise permitted, individual instances can have different settings of the same parameter within this one file. Instance-specific parameter definitions are specified as SID.parameter = value, where SID is the instance identifier.
The method of starting up the database with a server parameter file depends on whether you create a default or nondefault server parameter file. Please refer to "Creating a Server Parameter File: Examples" for examples of how to use server parameter files.
See Also:
CREATE PFILE for information on creating a regular text parameter file from a binary server parameter file
Oracle9i Database Administrator's Guide for information on pre-Oracle9i initialization parameter files and Oracle9i server parameter files
Oracle9i Real Application Clusters Administration for information on using server parameter files in a Real Application Clusters environment
Prerequisites
You must have the SYSDBA or the SYSOPER system privilege to execute this statement. You can execute this statement before or after instance startup. However, if you have already started an instance using spfile_name, you cannot specify the same spfile_name in this statement.
Syntax
create_spfile::=
Text description of create_spfile
Semantics
spfile_name
This clause lets you specify a name for the server parameter file you are creating.
If you do not specify spfile_name, Oracle uses the platform-specific default server parameter filename. If spfile_name already exists on the server, this statement will overwrite it. When using a default server parameter file, you start up the database without referring to the file by name.
If you do specify spfile_name, you are creating a nondefault server parameter file. In this case, to start up the database, you must first create a single-line traditional parameter file that points to the server parameter file, and then name the single-line file in your STARTUP command.
See Also:
"Creating a Server Parameter File: Examples" for information on starting up the database with default and nondefault server parameter files
Oracle9i Database Administrator's Guide for Windows (or other appropriate operating system specific documentation) for default parameter file names
pfile_name
Specify the traditional initialization parameter file from which you want to create a server parameter file.
If you specify pfile_name, the parameter file must reside on the server. If it does not reside in the default directory for parameter files on your operating system, you must specify the full path.
If you do not specify pfile_name, Oracle looks in the default directory for parameter files on your operating system for the default parameter filename, and uses that file. If that file does not exist in the expected directory, Oracle returns an error.
Note:
In a Real Application Clusters environment, you must first combine all instance parameter files into one file before specifying it in this statement to create a server parameter file. For information on accomplishing this step, see Oracle9i Real Application Clusters Setup and Configuration.
Examples
Creating a Server Parameter File: Examples
The following example creates a default server parameter file from a client initialization parameter file named t_init1.ora:
CREATE SPFILE
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
Note:
Typically you will need to specify the full path and filename for parameter files on your operating system. Please refer to your Oracle operating system documentation for path information.
When you create a default server parameter file, you subsequently start up the database using that server parameter file by using the SQL*Plus command STARTUP without the PFILE parameter, as follows:
STARTUP
The following example creates a nondefault server parameter file s_params.ora from a client initialization file named t_init1.ora:
CREATE SPFILE = 's_params.ora'
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
When you create a nondefault server parameter file, you subsequently start up the database by first creating a traditional parameter file containing the following single line:
spfile = 's_params.ora'
The name of this parameter file must comply with the naming conventions of your operating system. You then use the single-line parameter file in the STARTUP command. The following example shows how to start up the database, assuming that the single-line parameter file is named new_param.ora:
STARTUP PFILE=new_param.ora
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_616a.htm#SQLRF01315
Joel P�rez

Removing dead Exchange 2003 and Exchange 2000 Server from the domain

Hi Team,
I have come across a client who wants to migrate to O365 from existing Exchange 2003 environment through the Hybrid Model. I am trying to introduce 2010 Sp3 to the environment. While checking the environment using Exchange pre-deployment found 2 servers
in the environment which is not present on the network now. Client has no clue what they are.
One is Exchange 2003 and the other is Exchange 2000. The problem here is i cannot introduce Exchange 2010 Sp3 unless all the Exchange servers are running minimum Exchange 2003 Sp2.
At present i find only 2 exchange 2003 Sp2 server which are in production. Need kind assistance to move forward.

Hi,
I recommend you follow the steps below:
1. Please upgrade Exchange 2000 and Exchange 2003 to Exchange 2003 SP2 at first.
2. Deploy Exchange 2010 servers in this order: CAS, Hub, UM and Mailbox. For more information, here is an article for your reference:
Exchange 2003 - Planning Roadmap for Upgrade and Coexistence
http://technet.microsoft.com/en-us/library/aa998186(v=exchg.141).aspx
3. Install Exchange 2010 SP3.
Here is an article for your reference.
Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
About a hybrid deployment with Microsoft Office 365 using Microsoft Exchange Server 2010 servers, here is an article for your reference.
Understanding Upgrading Office 365 Tenants for Exchange 2010-based Hybrid Deployments
http://technet.microsoft.com/en-us/library/jj945383(v=exchg.141).aspx
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

SMS 2003 and ZFD 3.2 and/or 7.x interoperability

Similar Messages

Maybe you are looking for