SMS 2008 Server time out same time every hour

Our server times out at the same time every hour. Any computer connected to our network at exactly xx:53, any program or anything you are attempted to do goes to the loading circle and says not responding. It stays that way until xx:54. Every hour, every
day. However, nothing shows up on the error reports.

Hi MNQWolfe,
Based on your description, I suggest that you should firstly check if there any program or feature (such as antivirus program, update, backup and so on) started
working at that time. Also, please monitor the Task Manager or Resource Monitor to check if any process was started at that time.
In addition, it seems to be a network issue. Please run a sniffer on the server. You can use Microsoft Network Monitor 3.4 to monitor and then check ARP messages
and so on.
Microsoft Network Monitor 3.4
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=4865
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

Can I do multiple installs on one server at the same time ?

Hi. we have a project where the basis group is under very tight deadlines. We are tasked with installing multiple SAP systems on the same server. Is it possible to install more than one SAP systems ( ie ERP, BI, EP, CRM ) on the same physical server at the same time. for example on analyst install ERP while at the same time another analyst do EP and so on.... Has anyone done that before and if so are there any issures. ( I put in a SAP note and got the response that this is not supported, but I just wanted to see if anyone had done it anyways )

Hi Dan,
Frankly simultaneous installations is not a great idea. There will be an enormous competition for resources. Then you also need to make available ports for carrying out the installations. Next it will involve high amount of coordination
What of course is more reasonable is the idea of hosting more than one SAP instance on the same physical server though again harware is a very important concern. It includes your hard disk space,memory,CPU and other generic hardware.
Please award points for useful answers.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

How to show a picture both on client and server at the same time (X11?)

Hi Guys
I want show a picture on my client as well as on the server(in another location) at the same time, pretty much like showing something both on laptop and on a projector. Assume I have a picture sssss.jpg on the server A1, if I want to open that picture to my client, I can simply to do the following from client A2:
xhost A1
telnet to and login A1
setenv DISPLAY "ipaddress of A2":0.0
Anyone can direct me how to show picture the client that I am sitting at an also show on the server at the same time?
Thanks

VNC would let you do that. With a shared connection, both machines could run a VNC client to the same session.
Darren

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

Can you run Embedded PL/SQL Gateway and Oracle HTTP Server at the same time

Hi,
I know this will sound a bit odd but their is a business case for asking this. Can you run APEX via the Embedded PL/SQL Gateway and the Oracle HTTP Server at the same time? Would their be any security/stability/etc issues I'd need to worry about? I know that I'll need to run them on different ports.
Thank you,
Martin Giffy D'Souza
[http://apex-smb.blogspot.com/]

I think I've done this in the past. Theres no technical reason why you can't do this as far as I know.
I can't remember if I used different ports or same port.

How to parallel boot tuxedo server in the same time ?

Beacause I have more than 1000 tuxedo server, and it's take a long when startup
server process.
Can I booted more than one server in ther same time in Tuxedo8.0 ?
If yes, please advise to me how to do ?
Thanks you for advises.

try booting first admin servers with -A option then take multiple windows of
of master box and do tmboot -l <lmid> and see if it works.
"Sutep" <[email protected]> wrote:
>
Thanks you for your advise Revital.
But when I try to boot with -w option, I found error and it's do not
booted success.
Do you have the other ideas about faster boot Tuxedo processes?
"Revital" <[email protected]> wrote:
Hi,
This will do the job (tmboot -y -w") if you don't care about the order
which the
servers are booted. There are some Administative servers (like the DOMAIN,
etc)
that you need to boot first, last or in a spacific order.
Other then that it should help you (it helped me).
Bye,
Revital Bloom
"Nong mod" <[email protected]> wrote:
I think "tmboot -y -w" will boot them all in parallel for you.
"Sutep" <[email protected]> wrote:
Beacause I have more than 1000 tuxedo server, and it's take a long
when
startup
server process.
Can I booted more than one server in ther same time in Tuxedo8.0 ?
If yes, please advise to me how to do ?
Thanks you for advises.

My time capsule backs up every hour. how do I change this to daily backup, my time capsule backs up every hour. how do I change this to daily backup

My Time Capsule backs up every hour.. How do I change this to back up daily?

http://pondini.org/TM/13.html

Broadband cuts out same time every day

Hi, My broadband cuts out at the same time every day. It used to be at about 11.35pm and it's now at approx 8.10pm. Can anyone help please? Many thanksMM Router stats: Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up TimeWANLANWLANPPPoA230662301607281900:24:02Down000000:25:34Up28411290840755310770:25:10Broadband Link Downstream UpstreamConnection SpeedLine AttenuationNoise Margin1504 kbps605 kbps72.0 dB42.0 dB6.4 dB7.0 dB

Its due to one of two reasons, you have mains supply spikes/blackouts or the power supply is faulty in the router. Because it's occurring at a regular timed intervals, I'd say it's more likely to be the former. You need to check whether something in the premises is switching on at that time, examples would be electrical water heaters on timers, etc... And also confirm that the router mains cable is plugged firmly into the socket, as if it's loose it would make it more subseptable to such spikes/blackouts.

Cant upload website - times out on different % every time.

Hello,
I have had a lot of trouble this past week in uploading our company website, the only changes made have been to our pdf catalogue download. Every time i try to upload it eventually times out between 60-90% and i get a [421 error] message - there also seems to be no pattern on a specific file it gets stuck on and i have tried 20+ times! . We have other websites with the same hosting company and they upload fine so i assume i can rule out that the hosting is an issue.
I began as usual by just selecting to upload modified files and even when i do this it seems to still upload the whole website, i have tried the option to upload the whole website but i get the same result. I have gone back and tried to upload old versions of the website and was surprised that these do not work either..?! I have tried even moving my folder that contains all my website uploads so that it would unlink from the website and trying to upload without all the files and this doesn't work either. I can upload to business catalyst and i can export to html.
I unfortunately haven't been able to update Muse since last year as our operating system is outdated and the newer versions wont support it (i have asked for a newer computer at work but no luck!) although i doubt this is the problem as i am still able to upload our other websites!
Does anyone have any suggestions? (in simple terms please!)
Thanks!
http://www.lpegroup.com.au

Hi Eliza,
Can you try uploading the website using Passive mode from the options?
Regards,
Akshay

Connect 2 iPads to windows server at the same time

I purchased two iPads to view files from windows server, purchased FileBrowser app from iTunes, works good with one iPad, but when tried to connect second iPad, couldn't do it because it was timing out, disconnected first iPad and second works fine, for some reason can not connect them both at the same time. Tried to use different logins, no luck, checked ips are different, any ideas ? Thanks

Is your credit card reader wired through the iPad through the charging port or headphone jack?
As of this moment, there is no dual link that will attach to the charging port that supports both a credit card reader and a barcode scanner.
If you're having problems with the bluetooth on the barcode scanner, I advise moving any electronics near the iPad, or any obstructions. Also, restart the bluetooth and repairing daily helps. On another note however, depending on what type of bluetooth your iPad aquires, (bluetooth 2.1 for iPad 1 and 2, or bluetooth 4.0 for iPad 3) it can limit the range how far you can use your barcode scanner and how fast it can transmit data. A safe distance in my opinion is between 5-10ft using the scanner or any bluetooth device from your iPad.
Hope this works!

How many can access server at a same time

Just installed trail version of Essbase 9 on my localnetwork ,
how many can access server (connect) data using excel at a same time.

I believe Oracle has issued unlimited license files for most products.
They have also retired the Licensing Server product.
I think you can have unlimited Excel Users connected to your version.
I am wondering "How long is the trial version good for?"
http://licensecodes.oracle.com/hyperion.html
Brian Chow

DSL cuts out same time each day 4:45 pm

Is there a reason why for the last 3 nights in a row my DSL service cuts off at the exact same time? It's to the point when I anticipate when it will cut off and hurry to check email before losing the connection. I have tried re-booting the modem and not re-booting the modem. But always the service resumes by the next morning. Nothing has changed on my end. Please help.

Also
Step one: Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that your non-bogan public IP Address will show up. It might shown up as the final hop (bottom-most line of the trace) might contain a hop with your IP address in it. Either remove that line or show only the first two octets. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
For example this what I saw when I was using Verizon
news.giganews.com
    traceroute to 71.242.*.* (71.242.*.*), 30 hops max, 60 byte packets
    1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 13 ms 13 ms 13 ms
    2 ash-bb1-link.telia.net (213.248.70.241) 39 ms 7 ms 7 ms
    3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 4 ms 4 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 4 ms
    4 so-7-1-0-0.PHIL-CORE-RTR1.verizon-gni.net (130.81.20.137) 6 ms 6 ms 6 ms
    5 P3-0-0.PHIL-DSL-RTR11.verizon-gni.net (130.81.13.170) 6 ms 6 ms 6 ms
    6 static-71-242-*-*.phlapa.east.verizon.net (71.242.*.*) 32 ms 32 ms 33 ms
Step two: Can you provide the Transceiver Statistics from your modem?
#3 If you don't know how to get that info:
a) What is the brand and model of your modem?
b) If you have a RJ-45 WAN port router connected to it: What is the brand and model of the RJ-45 WAN port router?
#4 If you have a RJ-45 WAN port router connected to the modem, even if you know how to get the Transceiver Statistics from the modem: What is the brand and model of the RJ-45 WAN port router?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Calculate actual time (Out Date Time - In Date Time)

Hi All
I am using Oracle 9i
I have a two column table
having date and time value in on of the column
data is look like this
Name Performed_Time
IN 30-MAR-2008 09:15
OUT 30-MAR-2008 11:30
IN 30-MAR-2008 12:00
OUT 30-MAR-2008 14:45
IN 30-MAR-2008 16:00
OUT 30-MAR-2008 18:21
No the problem is that
I need to calculate the actual time between every OUT and IN e.g OUT - IN (Out Time minus In Time)
wud anybody plz help me regarding this?
Thanks
Hassan

Nice one, but seems to be expensive.
SQL> set autotrace on
SQL> Select (dt_out - dt_in) * 24*60
2        from (select flag, dt dt_in, lead(dt) over (order by dt) dt_out
3                from t)
4      where flag = 'IN';
(DT_OUT-DT_IN)*24*60
                 135
                 165
                 141
Execution Plan
Plan hash value: 3295878825
| Id | Operation           | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT    |      |     6 |   126 |     4 (25)| 00:00:01 |
|* 1 | VIEW               |      |     6 |   126 |     4 (25)| 00:00:01 |
|   2 |   WINDOW SORT       |      |     6 |    72 |     4 (25)| 00:00:01 |
|   3 |    TABLE ACCESS FULL| T    |     6 |    72 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter("FLAG"='IN')
Note
   - dynamic sampling used for this statement
Statistics
          4 recursive calls
          0 db block gets
         15 consistent gets
          0 physical reads
          0 redo size
        473 bytes sent via SQL*Net to client
        395 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          1 sorts (memory)
          0 sorts (disk)
          3 rows processed
SQL>
SQL>
SQL>   Select ins.dt as in_time, outs.dt as out_time, (outs.dt - ins.dt)*24 as time_in
2      from (
3           select flag, dt, row_number() over (order by dt) as rn
4           from t
5           where flag = 'IN'
6          ) ins
7          LEFT OUTER JOIN
8          (select flag, dt, row_number() over (order by dt) as rn
9           from t
10           where flag = 'OUT'
11          ) outs
12          ON (ins.rn = outs.rn);
IN_TIME           OUT_TIME             TIME_IN
30-MAR-2008 09:15 30-MAR-2008 11:30       2.25
30-MAR-2008 12:00 30-MAR-2008 14:45       2.75
30-MAR-2008 16:00 30-MAR-2008 18:21       2.35
Execution Plan
Plan hash value: 3072654067
| Id | Operation            | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |      |     3 |   138 |     9 (34)| 00:00:01 |
|* 1 | HASH JOIN OUTER     |      |     3 |   138 |     9 (34)| 00:00:01 |
|   2 |   VIEW               |      |     3 |    72 |     4 (25)| 00:00:01 |
|   3 |    WINDOW SORT       |      |     3 |    45 |     4 (25)| 00:00:01 |
|* 4 |     TABLE ACCESS FULL| T    |     3 |    45 |     3   (0)| 00:00:01 |
|   5 |   VIEW               |      |     3 |    66 |     4 (25)| 00:00:01 |
|   6 |    WINDOW SORT       |      |     3 |    36 |     4 (25)| 00:00:01 |
|* 7 |     TABLE ACCESS FULL| T    |     3 |    36 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - access("INS"."RN"="OUTS"."RN"(+))
   4 - filter("FLAG"='IN')
   7 - filter("FLAG"='OUT')
Note
   - dynamic sampling used for this statement
Statistics
          7 recursive calls
          0 db block gets
         30 consistent gets
          0 physical reads
          0 redo size
        623 bytes sent via SQL*Net to client
        395 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          2 sorts (memory)
          0 sorts (disk)
          3 rows processed
SQL>

Time Machine window appears every hour

Every hour a pop-up window appears on my iMac as follows:
<Time Machine couldn’t complete the backup to “Time Machine - 2 TB”.
<The backup disk ran out of space unexpectedly. Time Machine will try to make <more space available by removing expired backups during the next scheduled <backup.
<Open Time Machine preferences to select a larger backup disk or make the backup <smaller by excluding files.
However, Time Machine does not remove expired backups. It repeats this message every hour.
This did not happen before I upgraded to Mountain Lion from Safari.
How do I fix this?

Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

SMS 2008 Server time out same time every hour

Similar Messages

Maybe you are looking for