SMS Accelerator for various series 60 version 3 ha...

Hi guys
have been asked to let you know about the new SMS Accelerator available for various series 60 version 3 handsets. You can get the application from http://europe.nokia.com/support and choosing the relavant handset. This should help speed up SMS sending from your handset.
regards
AjakMessage Edited by ajak on 01-Nov-2006
02:51 PM

10-May-200711:11 PM
keffa wrote:
This would require a motion sensor in the phone.
Sorry, I didn't explain myself properly. I'd like my E65 to work like my 6270, whereby the full screen area is used in camera mode. The E65 only uses part of the screen.
10-May-200711:11 PM
keffa wrote:
In month view you can see the week number running down the left hand side. In week view you will see it listed at the top (If not you can change this option in the settings).
Not available on my handset!
10-May-200711:11 PM
keffa wrote:
It does go straight to the message on my E65 unless you have more than one message in which case it takes you to the inbox. What does yours do exactly?
Even with one message, when I click on the new message alert at the top of the active standy screen it briefly displays "Messaging" before going to the Inbox. Not the end of the world, but a bit annoying!
Thanks for your feedback!!

Similar Messages

  • Animated SMS's for N-Series.

    Hi All Guru's of Nokia Forum,
    I have found another issue with my N73 phone, it does not allow me to add/read animated images in SMS's, and also smilies looks like text messages instead of actual smilies when we send or read SMS. I found animated SMS software in net but it is not free it costs around 3 Euro.
    I guess this is also a Basic feature which comes in any other mobiles, I am not sure why Nokia don't add this features! Is it indirectly supporting private software market so that Nokia mobile users can go n buy those software’s to make them Rich?
    Any body Pl let me know how can I read/send smilies which looks similar to yahoo smilies through SMS's in N73.
    (Note: My previous topic "Animated wallpaper for N-Series mobiles" discussed about another issue with N-Series, you are welcome to reply for that thread too.)
    Thanks,
    Dileep.

    07-Nov-200702:44 PM
    android wrote:
    The hitch here in having that software for smileys, is that the other phone receiving it should have the software too, else they will see what you saw in your phone without that software.
    Incorrect.
    Other phones see the smilies as normal (either as text smilies or that phones own picture smilies). The message are still sent as a standard text message, not picture messages so there is no additional messaging costs.
    The program will convert incoming messages smilies so you will receive messages with smilies.
    The only people that won't see the smilies are people with older incompatible phones or those with smartphones without the software. These people will see standard text smilies.
    .Message Edited by psychomania on 07-Nov-200702:54 PM

  • N80 sms accelerator, HELP

    I am still trying to download the sms accelerator for my nokia n80, when i try to click on the "download now" icon on my pc nothing happens? i have been trying for days! is there any over way of getting this software???

    j30jba
    SMS accelerator has to be downloaded onto a PC 1st and then transferred to mobile through applications manager.
    If you face problems downloading to PC then it could be that the server could be facing some problems.
    I did mine and got it transferred to phone. It just works fine.
    If my post has helped you please click the white star on the right

  • I Bought lightroom 5 online and for lizensation my seriesnummer  is named as Aktiualisierungsnummer and i was asked for a series number of a previous version. I never had one, when I bought the lr5 version there was no comment about having a previous vers

    I bought lightroom 5 online and for licensation my seriesnummer  was named as Aktiualisierungsnummer and i was asked for a series number of a previous version. I never had one, when I bought the lr5 version there was no comment about having a previous version. How can I get my version licensed

    Babowa
    Thank you for your prompt reply.  I have bought 1 MacbookPor 17, 1 Macbook air, 1 MacbookPro 15 , 2 ipads, 3 iphones, and this iMac27 and 2 of iMAC24 or 20 not sure   but I do not recall ever doing what you are telling me in your reply.   When you get a extended car warranty, you don't   sign up for it.. it is just there and is included in the sale.   You don't buy this warranty to use it.. You buy it, in case something happens.   Here a perfect iMAC with minimum 100 hour useage has a dead drive.  That is not normal and I should not have to even be requesting anything since most MFG offer a 3-5 year warranty on their disc drives and I believe that is probably passed on to Apple regardless if an extended warranty is purchased or not.   Customer service dictates a more flexible approach to make sure the lifetime value of a customer is not lost due to some misunderstanding.
    I was in the MacStore that I purchased the unit..and they found and pulled the invoice and confirmed
    the purchase of it in front of me.  I had paid with credit card and fortunately it was there in their system.   I do not also recall recieving any box or paper although most everything I ever get remains sealed.. I am not in the habit of opening anything since I have never encountered any serious issues before.
       I have used my Macbookpro warranty 1 time  and that is all throughout the years I have been investing in Apple equipment.
    I just recieved a letter from the store asking me to get the paper to them so they can register it... I don't recall getting any paper actually.  But I do have several boxes sealed here..  On this iMAC27, it was a hurry up and get it done thing and I don't remember taking anything extra with it.   Regardless,  my request does not seem unreasonable.
    Thank you

  • N80 INTERNET EDITION, SMS ACCELERATOR n VPN

    Hey can anybody tell me if the SMS Accelerator comes pre-installed on N80 I.E since there is no mention of it on the support/software pages. My N80 I.E's firmware version is 4.0632.0.38 ( latest as per my limited knowledge ). Also on the N80 I.E support pages, it does not mention about VPN Client software as it does on the regular N80 page. Can somebody explain this to me?

    08-Mar-2007
    11:25 AM
    jacobsladder wrote:
    SMS accelerator is included in N80 IE so no need to install the applications.
    Open up the download application and download the Gizmo voip plugin and visit http://www.gizmoproject.com/learnmore-nokia.html for more details.
    If you don't like gizmo then there is also Truphone and Fring. (more recently I've been using Fring)Message Edited by jacobsladder on 08-Mar-2007
    11:26 AM
    Hi
    Why do they install Gizmo when it is nearly impossible to get the darn thing working!
    Fring seems the easiest at the moment though.

  • Finaly. How to enable hardware acceleration for X-

    After much discussion on this form and with my friends, I've finally cracked hardware acceleration for X-FI on Vista. It works by using Alchemy on a large scale and gives acceleration for everything you listen to. The breakthrough finally came through thanx to help and info I received from alexs3ds on this thread?http://forums.creative.com/creativel...message.id=645?It started as an emulation concept discussion and evolved in to this. It gives all your 3D audio effects and EAX in games without game by game transmutation and I have noticed a large quality and volume enhancement in normal music and film audio because even that is now accelerated. Here's a step by step guide on how to do it.[color="#ff0033">?[color="#3366ff">Download Alchemy and install. Get it here .[color="#3366ff">http://preview.creativelabs.com/alchemy/default.aspx[color="#3366ff">?[color="#3366ff">Open a?window in explorer and go to [color="#3333ff">Windows\System32.[color="#3366ff">?[color="#3366ff">Locate the file dsound.dll and right click on it then select properties.[color="#3366ff">?[color="#3366ff">Click the security tab then click advanced.[color="#3366ff">?[color="#3366ff">In the advanced security panel?that opens up, click the owner tab then edit.[color="#3366ff">?[color="#3366ff">Use this to set your user account name as owner. Use the other users and groups button if you can't see your account name select your user account name using the select users pane and add it. Make sure your user account name is set as owner.[color="#3366ff">?[color="#3366ff">Next you want to change permissions in the advanced security panel so you would click the permissions tab, click edit, on the panel that pops up click add and add your user account name. On permission entry panel, click full control under the allow line. Then ok everything and close every thing down till your back at the explorer.[color="#3366ff">?[color="#3366ff">Now rename dsound.dll to something like dsound.dll.bak. ( changing owner and permissions allows you to do this ).[color="#3366ff">?[color="#3366ff">Open up another explorer window and navigate to the Alchemy directory ie C:\program files\alchemy, highlight the dsound.dll file and the dsound.ini file and copy them.[color="#3366ff">?[color="#3366ff">Paste them into the system32 folder and that's it. Reboot your computer and you are now using hardware accelerated sound. ?[color="#ff0033">IMPORTANT NOTES YOU MUST KNOW[color="#ff0033">?This only supports 6-Bit samples. You can't use 24-Bit audio samples. You can however reverse the process and regain support. The Alchemy drivers can cause a bit of choppy sound now and then if you don't configure them right. See the Alchemy advanced FAQ for info. Plus, remember they are Beta. You can however update your system as and when alchemy updates. It's not known if every game will work with EAX or 3Dsound with this. To my knowledge?all, if not?most do.You can still edit and add game settings to the dsound.ini file. For help and info in getting the best quality out of your X-FI and a list of what XP software you can install off your driver disk that came with your card refer to this thread. http://forums.creative.com/creativel...essage.id=6029?Enjoy. Edit:- IMPORTANT UPDATE?This will only work if your card is set in game mode. It will not work properly in any other mode. See my post further down this thread for more details.Also important is that I have only been able to test this on Vista 32 ultimate. It is untested in any other version of Vista. Perhaps people who have it running on other versions of Vista could post this info and help put together a list. ?
    Message Edited by Sensi on 05-09-200705:20 AM
    Message Edited by Sensi on 05-09-200705:20 AM

    It does work, however I discovered more?important conditions. You MUST have your audio card in game mode BEFORE you do this. The reason is that the alchemy file passes the audio to OpenAL in game mode only. IF YOU TRY TO RUN GAMES IN ANY OTHER MODE YOUR SYSTEM WILL CRASH WITH BSD. IF YOU TRY TO RUN MEDIA PLAYER IT WILL HANG. IF YOU RUN DIRECTX DIAGNOSTIC YOUR SYSTEM WILL CRASH WITH BSD. YOUR?CARD MUST BE IN GAME MODE. IF YOU TRY TO CHANGE TO GAME MODE AFTER THE SWITCH, YOU WILL NOT BE ABLE TO AS THE AUDIO PANEL WON'T LOAD. DO IT BEFORE YOU SWITCH. As for windows replacing files after reboot, that aint happening to me. I've looked everywhere and can't find any sign of?were replacement files would come form either. Not that I'm saying it isn't happening, Vista is supposed to have a security system that stops you from replacing core system files. It just ain't happening in my system. However, I do have various system hacks in place and one of them may be stopping this. Need to look in to this. Fact:- I'm sitting with this in system now ( got no intentions of going back cause the audio's great ). I've tested 0 up-to date games and all give EAX etc. Without transmutation. Audio sounds amazing compared to what it was before and video audio finely plays in sync ( hurray). Maybay I should add a warning to this mod that you must only try it if you know what you are?doing.BTW in case this has anything to do with it, my system is :-
    Asus?am2 with nforce 4, amd am2 x2 dual core cpu, 2 gig dual channel ddr2 800, oem?SB X-FI and Vista 32 ultimate.
    Message Edited by Sensi on 05-09-200705:04 AM

  • Is there a way to change the default colors for data series in charts?

    I have tried to find settings for data series colors in the various CSS files but have not found any.

    Did you try:
    OracleBI/web/app/res/s_.../popbin/
    EX:
    line.pcxml Look for <SeriesDefinition ...
    we modified the line width and a few other things. You'll have to modify all the pcxml files for all the chart types you want to customize.

  • The problem of creating service for adapter for mq series v8.1

    Hi everyone, I have some problem when I try to create service for adapter for mq series using application integration design console. Everything is fine when I define the service but some error shows when I try to test it. The error message is:
    -------- Begin level 0 Exception Stack Trace --------
    com.bea.wlai.client.ApplicationViewException: Failed to locate deployment information for service ' on ApplicationView 'AppView1'
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:186)
    at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:290)
    at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:247)
    at __WLAdapter4MQSeries_Prototype_48f240ab.AppView1_6k4mbt_EOImpl_814_WLStub.getRequestDocumentDefinition(Unknown Source)
    at com.bea.wlai.client.ApplicationView.getRequestDocumentDefinition(ApplicationView.java:573)
    at jsp_servlet.__testrslt._jspService(__testrslt.java:361)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
    at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638)
    at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423)
    at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:154)
    at jsp_servlet.__display._jspService(__display.java:659)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
    -------- End level 0 Exception Stack Trace --------
    And my request document is:
    <?xml version="1.0"?>
    <ns0:s1 xmlns:ns0="wlai/AppView1_s1_request">
    <Data>123</Data>
    </ns0:s1>
    The following is the schema for the request document:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema elementFormDefault="qualified"
    targetNamespace="wlai/AppView1_s1_request"
    xmlns="wlai/AppView1_s1_request"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <xsd:element name="s1">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="Data"
    type="xsd:string"/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    Anybody got some idea about this problem? Thanks for your help.

    Did you check these links ->
    http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html
    http://www.dbasupport.com/oracle/ora10g/CreateDBManually.shtml
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#ADMIN002
    Regards.
    Satyaki De

  • How can I make the wireframe identical for various video clips?

    Hello,
    For the end credits on a small movie, I would like the video clips to be much smaller, and the background to be black. I know how to make the clips smaller on the screen, and this is done by adjusting the wireframe.
    I am trying to have the wireframe remain in its identical size and location across various clips but cannot figure how to do this other than change the wireframe independently for each single video clip, making it an approximate job.
    Is there a way to ensure that the properties of the wireframe (size, position) remain constant for a series of clips? I have tried to find some properties settings for the wireframe which I could replicate for all clips but this search has proved unsuccessful.
    Many thanks in advance for any help.

    Use the Paste Attributes command as detailed in this link:
    http://discussions.apple.com/thread.jspa?threadID=1987781&tstart=15
    Instead of checking the Filters box, check the Basic Motion box.

  • Solution Accelerator for AP question

    Hi,
    I am working on Solution Accelerator for AP invoice automation. I click on EBSR12 zoom -> process invoices -> login to IPM page -> select an invoice in manual entry queue -> click on Request for invoice information and assign a user from whom I need the information. My question is what happens next. Does the user gets an email asking for information ? Please let me know if you have any ideas.
    Thanks
    Sam

    The answer is that it depends on your accelerator configurations, customization, domain setup, accelerator version, etc. multiple things happen as per your workflow process, but bascally you send the item to the RfI composite, which includes a human task. the HT configuration state what occurs in terms of notification.
    -ryan

  • Driver for MM4000 series (motion controller) for labview 6.1 (gpib)

    Hello,
    I need the instrument driver for a newport motion controller MM4006.
    I found the driver for MM4000 series, it could be ok, but I need it for labview 6.1 and not  for labview 7 or 8.
    Is it possible to find this driver for older version of labview than 7 or 8?
    Thanks
    Best regards.
    Ludovic

    Good idea, I'm not sure of the result, but... Here is the zip file (aviable here).
    (oups, you were faster ^^)
    Message Edité par Mathieu R. le 12-08-2006 05:19 PM
    .mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
    Mathieu R.  
      CTD - Certified TestStand Developer / Développeur TestStand Certifié  
      CLAD - Certified LabVIEW Associate Developer  
    Attachments:
    npmm4000.zip ‏419 KB

  • Sms accelerator software

    hi all, could any one email me the software for nokia n80 sms accelerator?

    hey,
    you can go to the N80 support site and then in the DOWNLOAD section. You can find the N80 SMS Accelerator there.
    Cheers,
    KATH
    POWER_USER
    "tEcHnOlOgY is LIFE"

  • MarkerText - position and visible for one serie (not for all of them)

    Hello,
    can I position the MarkerText in a graph in this way that is centered horizontally inside the serie?
    I know I can use the element markerTextPlace to place the MarkerText in relation to the marker, but that is not waht I want. With this solution I get the MarkerText only on the bar or around the bar, but what I want is that the MarkerText will be shown on the center of the area (of the serie - horizontally) .
    I also want to make the MarketText visible only for specific series (one serie) but not for all series. Waht I can do is show the Markertext or not but it affects all the MarkerText of all the Series.
    Any help?
    Codruta

    What version of OS X and Mail are you running?

  • BizTalk 2013 R2 Accelerator for HL7 is missing MSH_26_GLO_DEF.xsd file under templates

    BizTalk 2013 R2 Accelerator for HL7 is missing MSH_26_GLO_DEF.xsd file under templates. Can anyone please help me on this. 
    Is there a way to report this issue to Microsoft?

    Hi Sandeep,
    Thanks for your feedback in BizTalk forum.
    From your description above, I can hardly give precise troubleshooting for this issue, please give more explanation about what happens.
    >> Is there a way to report this issue to Microsoft?
    If you cannot determine your answer here or on your own, consider opening a support case with us. Visit this link to see the various support options that are available to better meet your needs: 
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Please let me know if there is anything that I can do to help.
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • N73 SMS accelerator

    Hi, I have a N73 (on O2) and I really need to install the SMS accelerator to improve its speed.
    I tried to download it directly on the phone from nokia.com. I could do that but then I got a msg: the "Installation of 'N73_acc.... .sis' is not supported".
    What did i do wrong ?
    The connection to the website was obviously fine, the file is the right one for the N73 (it's the one on the nokia website, in the pages dedicated to the N73 !).
    The set up on my phone appeared fine (able to accept 'All', instead of 'Signed')
    Can someone help me ?
    Many thanks !!

    even I had similar situation. What you can do is go to FileManager and search for this file it should be under install and try to install from there or from Application Manager but for some strange reason it cant do on runtime.

Maybe you are looking for