Sms does not work as it tries to add 011 to the number

For some strange reasons, even though I programmed numbers with +39 country code, the SMS application is trying to send our a message, while I am in Italy, with 011 39xxxx. Obviously the network in italy does not allow the message to be delivered as 011 is not a recognized number. How can I remove the 011 which is automatically added by SMS application?
What is strange is that this is done only for a couple of numbers. I suspect that I received a call while outside Italy and the iOS stored that number as 011 39xxx while in reality it is stored as +39xxx in my phone book.
What can be done?

Do you have Settings>Phone>Dial Assist enabled? If you do and you're also adding country codes in your contacts, it may be getting confused. As I understand it, you should need to add the country codes manually.
Try deleting the problem numbers and adding them back, perhaps.

Similar Messages

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
Loïc

Accordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit

Droid Razr Maxx HD Data & SMS does NOT work in South Korea

If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...

I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!

My iphone bluetooth not connect to my hands free or parrot i have been using iphone 4s with6.0 software always worked now called apple no help so i restored my iphone 4 and that does not work i then tried my daughters iphone

my iphone 5 bluetooth not connect to my hands free or parrot i have been using iphone 4s with 6.0 software always worked now called apple no help so i restored my iphone 4 with 6.00 net work and that does not work i then tried my daughters iphone and blackberry and they connected
I then tried i phone 5 in my daughters and sons car and no luck. I cant get help from anyone its a joke

I found the solution to your problem. It solved mine right away and now I'm able to upload videos directly from my iPhone.
Go to this thread: https://discussions.apple.com/message/17366529#17366529#17366529

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

Downgrading the iOS is not supported by Apple.Have yo tried:
- Backing up and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
- Go to the OverDrive support site

I have an Acrobat 9 pro that I want to reinstall on acomputer that was reformated. the serial No. I have does not work. I spoke to your support on the phone and was told to contact you. HELP ! Thanks Beni

I have an Acrobat 9 pro that I want to reinstall on acomputer that was reformated.
the serial No. I have : [removed by moderator] does not work.
I spoke to your support on the phone and was told to contact you.
HELP !
Thanks
Beni

b. sagi
Please do not share your serial number on public forums.
Also confirm you are using correct serial number, Adobe serial numbers contain 24 digits.
Once you have located the correct serial number, refer below links
Error "Invalid serial number" | Acrobat 9 | CS4
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error

HT1212 Reset does not work on disabled Ipod touch. I did the never synced device option on a computer that we have never synced with. Still says try again in 22,462,172 minutes. Itunes says it cannot sync also. Any ideas???

Reset does not work on disabled Ipod touch. I performed the reset procedure Apple recommended and it did not work(Never synced device with itunes). Comes back to try again in 22,462,160 minutes. I tunes says Ipod is locked and can not access. Any ideas???
Thank you

Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HI,Have 10.10.3 version email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emails

HI,
Have 10.10.3 imac version- email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emails

That helped thanks-
I was able to solve this by deleting all "Envelop Index*"- and "ExternalUpdates*"-files in ~/Library/Mail/v2/MailData. After that I restarted Mail and let it reindex all mailboxes.

When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

WRT610N disconnects and does not work with Vista or media center extenders like the DMA2200

Linksys and all other router manufacturers advertise the greatness of the wireless 5ghz band (especially with 802.11n), but I’m beginning to have my doubts. It is true that the 5Ghz band is hardly being used so you'll have virtually no one to compete with. However, the 5Ghz distance in no way compares to 2.4Ghz, and as a matter of fact, I find it to be quite terrible. At approximately 20 feet away, both my Linksys DMA2200 and HP notebook barely get 1 bar using the 5Ghz N band with my WRT610N router. In comparison, while using my 2.4Ghz WRT54g router, I get 5 full bars at that range, and at least 2 bars from anywhere else in my house.
I have all Linksys equipment in my house as I have been impressed with all of their 2.4Ghz in the past. However, I’ve recently upgraded everything to dual-band N equipment and found numerous flaws in each of the new devices, plus none of them really even play well together. My setup is: Linksys 610n router, DMA2200 media center extender, and a WUSB600N Dual-Band Wireless-N USB Network Adapter for my laptop – all of which are currently using the most up-to-date firmware. Other devices include a WRE54G extender and Nintendo Wii.
Problem #1) The LELA software with the new N devices doesn't even recognize that my DMA2200 is a media center extender. Using LELA, I should be able to select my media extender and allocate more bandwidth for streaming media. However, since my extender only shows up as an “unknown network device” those options are greyed out. I tried to manually change the device to a media center, but still no go. I suppose you can manually allocate bandwidth in the router setup somewhere, but considering these are all Linksys products, it’s absolutely ridiculous that an option specifically incorporated in the LELA software for a Linksys Media Extender does not work!!!
Problem #2) If you are only using one system with the router, the router might actually work as intended. For most of us though there are going to be at least 2 or more systems connected to the router (wired, wireless, or a combination of the two) such as a PS3, Wii, laptop, PC, media extender, Xbox, etc. If that’s the case, you’re probably screwed because you WILL experience frequent dropouts… ESPECIALLY if just one those clients is a VISTA machine. Check the Linksys forums and you will find that this seems to be a problem with all of the new Linksys routers (610N, 310N, and 110).
Here is a Microsoft article that explains the issue
http://support.microsoft.com/kb/928233/en-us
Problem #3) Because of problem #2 I will never be able to get rid of the dropouts since my network is using one of Linksys’s media center extenders. The DMA2200 is essentially a VISTA PC to some extent and accepts DHCP requests the same as a VISTA PC. Since it is not really a PC though, there is no registry modification that can be done to alleviate the VISTA problem (not that the registry mod really works anyways). So as long as I try to use my DMA2200 wirelessly with my WRT610N router, the frequent dropouts will occur and there’s nothing I can do about it. This is REALLY TERRIBLE since the DMA2200 is specifically designed to be used with the WRT610N router in order to take advantage of the 5Ghz band and wireless N transfer rates. You absolutely need 5Ghz wireless N to efficiently stream HDTV WIRELESSLY, but if you lose your connection every 10 minutes, it is impossible to watch any type of streaming media.
Problem #4) As mentioned already, when the “N” 5Ghz range is working on the WRT510N router, the distance sucks compared to standard 2.4Ghz G, N or mixed mode networks. You can try to make it better by strictly using N products, disabling the 2.4ghz band all-to-gether, and using the wider 40mhz frequency, but it doesn’t really help. The higher 5Ghz band is a more concentrated signal and therefore simply does not reach as far as the lower 2.4ghz band. I wonder why all of these new products state that the 5Ghz range will increase your distance, when in fact it actually makes it worse?
So… basically, this router does nothing that it claims too and is basically rendered useless on any network with a VISTA machine. This has not been addressed by any Linksys firmware updates or VISTA software updates so there is no reason to even consider using this router if you you’re using VISTA or some type of VISTA Media Center Extender such as the Linksys DMA2200.
Although, I’ve always sworn by Linksys in the past, the amount of wasted time, frustration, and horrible support has really changed my view about them. I’ve reverted back to my old trustworthy WRT54g router and had to run cable through my house so that I wouldn’t have to box my DMA2200 extender up and let it collect dust in the attic. It’s really disappointing that I spent all this money to buy this equipment specifically because they’re supposed to work together, but in fact they don’t. Plus what’s the point of having top notch wireless equipment if you have to run cables in order for them to work?
Message Edited by bobbodavis on 11-15-2008 07:37 PM

I have fixed all the IP adresses to avoid the DHCP problem but I still have problems.
I have sereval scenarioes:
1. MC < 1Gb wire > WRT610N < 5.0n WIFI > MX
I can see HDTV on this one but it disconnects
2. MC < 1Gb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV and disconnections
3. MC < 2.4b/g WIFI > WRT610N < 2.4b/g WIFI > MX
No HDTV but no disconnections - but very slow and streaming like youtube
4. MC < 100Mb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV but nice picture - testing for disconnections right now - 30+ min.
Result:
This test was very good. Stabil streaming, no disconnects for an hour. Won't support HDTV but the rest seem to work fine.
5. MC < 100Mb wire > WRT610N < 5.0n WIFI > MX
Not tested yet - looking forward to this - might bring me HDTV.
Result:
This gives HDTV but there is a problem with stability on the streaming but very difficult to see on the picture. Testing for disconnects - now tested for 30 min. - no disconnects.
This looks really promissing.
I am pretty sure that the WRT610N have a problem in the switching part of the router specially when it has to switch from 1G to WIFI. I bought the WRT610N to get HDTV on WIFI and Cisco markets the DMA and WRT610N as a perfect match. But it definately have problems - i still do not understand their silence about this.
I will come back with the last results when I have them
/John
Message Edited by Infraxpert on 01-05-2009 04:38 PM
Message Edited by Infraxpert on 01-05-2009 05:35 PM

My iphone 3gs on off button does not work. Is there another way to reset the phone?

The on/off button on my iphone 3gs does not work. I cannot shut the phone down to reboot and it is stuck in a no service. I cannot get cell or internet service. Is there another way to reboot the phone? Possibly a soft reset?

The screen goes to voice control. It only recognises the home button not the on/off button. Is there a way to soft reset the phone?

TS3274 My sound On/Off button does not work. I have to turn volume all the way down to silence it. Is the switch faulty, or am I missing sometging

The volume On/Off switch does not work. It does not mute sound. I have to turn volume all the way down to silence the sound.
Is the switch faulty or am I missing something here?

well first remove the case. check the headphone jack for debris. do a hard reset by holding sleep/wake and home button down together for 10 seconds untill apple appears. backup and restore via itunes. if issue persists the device needs repair

Two step verification in Canada SMS does not work with Telus

Just saw the announcement that Two step verification for your Apple account is now available to Canada.
http://www.macnn.com/articles/13/05/10/option.will.appear.automatically.in.accou nt.details/
Tried to sign up, unfortunately after many attempts and testing with a few different phones it appears that Apples SMS server is not connected with Telus mobility as the messages never come through to any of my phones on the Telus network.
So maybe the announcement is a little premature.

False start.
The option to sign up for two step verification has now been removed again.
I guess they have to get the SMS feature working first.
Here is a request. Apple can you implement the industry standard time based authentication protocol:
http://en.wikipedia.org/wiki/Time-based_One-time_Password_Algorithm
http://tools.ietf.org/html/rfc6238
Same one is being used by:
Google
Dropbox
Lastpass
Microsoft
Amazon AWS
Then you can use one of the many apps available for smartphones and support users who want something secure but that does not require SMS or an apple hardware device to login to their apple id.

UPDATE TO 9.0.1 DOES NOT WORK. MULTIPLE TRIES.

I have downloaded 9.0.1 3 different times. That is all that happens. There is nothing telling me how to install the new version. I have gone to different community forums 7-8 times. No one has the same problem as I do. I have asked FIREFOX for a chat room or a phone number to speak with a tech support person. My request was ignored. There seems to be a problem with FIREFOX not providing enough information to upgrade and then just allowing the user to flounder around trying to work out how to do it. I have tried several times to install . . . but when there is no information directing how to install it seems that FIREFOX does not care if it is upgraded or not. I have 3.6.1 and i am totally happy with it. It works perfectly 99% of the time. Why fix something that is not broken??!!! From what I have seen there are hundreds of people who have installed 9.0.1 and have nothing but trouble of a variety of different types. Given 3-4 minutes on the phone with tech support this entire problem would be solved. But all you do is ignore my request and try to send me somewhere else. If this situation cannot be solved and 9.0.1 installed and working properly I will have no choice but to leave FIREFOX and use INTERNET EXPLORER. I have been a loyal user of FIREFOX for almost 10 years. You decide what you wish me to do.

Swarnava, he already download it several times.
'''kanoer2000''', You actually may have Firefox 9.0.1 installed.
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/'''3.5.3'''
Your user agent according to more system details link on right of your post. The user agent getting stuck was not a issue as of Firefox 4.0 and newer.
See this on how to reset to default. https://support.mozilla.com/en-US/kb/websites+or+add-ons+incorrectly+report+incompatible+browser#w_reset-your-user-agent

Sms does not work as it tries to add 011 to the number

Similar Messages

Maybe you are looking for