SMS for guest without sponsor

Hello;
I have a WIFI service in public parks area , with a very large number of visitors , I need to allow the gusts to service themselves without any sponsors. I need them to be able to receive SMS after entering the mobile number.
can the ISE do that or do I need to customize a web portal and upload it to the ISE ?
also I need the ise to remember the user after successful login , so next time the end user will not consume the SMS bulks , can I do that by MAB or do I need another mechanism

ISE 1.2 supports SMS notification for sponsored guest only

Similar Messages

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor

I'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Files to download without any permissions for guest user.

Hello, i have created a KM Navi Iview, with path to /documents/.../...
When i go to
http://portal/irj/portal/anonymous i see a list of files, but i can copy,delete and rename files (permissions for guest are: read), how can i solve this, if i need only download permissions for guest?

Hello Artem,
Please do not remove the Guest User from its groups.
The Guest User is an integral part of the "Anonymous Users" group which ultmately falls under "Everyone" Group. How did you remove Guest User as only Config tool allows you to do that.
What I suggest is make a Portal Group of Users and add all your regular users to it. Give Read/Write permission to this group. Then add only Read permissions for Anonymous Users Group.
Hope this helped.

Regional Settings for Guest User

I am trying to display an Excel spreadsheet stored in SharePoint (via OneDrive for Business) using Excel online. I want the dates displayed in UK format (DD/MM/YY). The SharePoint site settings are set for English UK and the correct date is displayed
for a user defined in SharePoint. However, if a guest user accesses the spreadsheet, the dates are displayed in MM/DD/YY format. How do I change this so that it is displayed correctly for Guest Users?
Many thanks

what is the web application date time settings? as they are anonymous then they don't have an individual
regional setting. I don't think you can do what you want without a lot of custom programming.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

ISE 1.3 Guest API - using custom fields for guest creation?

I am currently working with the new ISE 1.3 guest api, i have most everything working, i can create guests fine, with the basic information entered into the guest account like first name, last name, company, email, phone and so on. Now i need some more fields to enter other information in for that guest, and i have created 5 extra custom fields called option1-option5, and enabled them for the "Known Guests" page on my sponsor portal. I can however not figure out how they should be adressed in the xml input sent in the api request...anyone tried this ?
Regards
Jan

Hi Johan,
Sure i can lead on the way, the stuff i am doing is part of a complete system i build and sell, that integrates with ISE to give customers the ability to create guest accounts using a number of different social media facebook, google and so on, to self-provision accounts for guest acces (and many other things :-)
I mainly use PHP for this, and for simplicity you can use a curl command line executed by any scripting you prefer, or use any curl library you might have available to you.
So, you need an ise sponsor account that has the "api usage flag" allowed in the sponsor group it is a member of. Then you need to know a few things about the ise setup, that needs to be sent with your request to ise, to allow the creation of a guest account.
If you need some code examples, send me a pm and we can figure something out
API Reference :
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/api_ref_guide/api_ref_book/ise_api_ref_guest.html

NAC guest server with RADIUS authentication for guests issue.

Hi all,
We have just finally successfully installed our Cisco NAC guest server. We have version 2 of the server and basically the topology consists of a wism at the core of the network and a 4402 controller at the dmz, then out the firewall, no issues with that. We do however have a few problems, how can we provide access through a proxy without using pak files obviously, and is there a way to specify different proxies for different guest traffic, based on IP or a radius attribute etc.
The second problem is more serious; refer to the documentation below from the configuration guide for guest nac server v2. It states that hotspots can be used and the Authentication option would allow radius authentication for guests, I’ve been told otherwise by Cisco and they say it can’t be done, has anyone got radius authentication working for guests.
https://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_hotspots.html
-----START QUOTE-----
Step 7 From the Operation mode dropdown menu, you can select one of the following methods of operation:
•Payment Provider—This option allows your page to integrate with a payment providing billing system. You need to select a predefined Payment Provider from the dropdown. (Refer to Configuring Payment Providers for details.) Select the relevant payment provider and proceed to Step 8.
•Self Service—This option allows guest self service. After selection proceed to Step 8.
•Authentication—This option allows RADIUS authentication for guests. Proceed to Step 9.
----- END QUOTE-----
Your help is much appreciated on this, I’ve been looking forward to this project for a long time and it’s a bit of an anti climax that I can’t authenticate guests with radius (We use ACS and I was hoping to hook radius into an ODBC database we have setup called open galaxy)
Regards
Kevin Woodhouse

Well I will try to answer your 2nd questions.... will it work... yes. It is like any other radius server (high end:)) But why would you do this for guest.... there is no reason to open up a port on your FW and to add guest accounts to and worse... add them in AD. Your guest anchor can supply a web-auth, is able to have a lobby admin account to create guest acounts and if you look at it, it leaves everything in the DMZ.
Now if you are looking at the self service.... what does that really give you.... you won't be able to controll who gets on, people will use bogus info and last but not least.... I have never gotten that to work right. Had the BU send me codes that never worked, but again... that was like a year ago and maybe they fixed that. That is my opinion.

Printing Solutions for Guest Wireless

So this is something that has been bouncing around the forums for a year or two now. I have failed to come up with a "best-of-breed" approach that meets the strict security requirments of a government department.
The scenario is this - the wireless platform is based around centralised Wism controllers in a datacentre and an anchor controller (for guest wireless) in a dmz, we have WCS to manage the components including the Lightweight Access-Points (mainly Cisco 1142N's) with a Cisco NGS to act as both hotspot and as the client credentials RADIUS authority. it works great except for printing which simply isn't currently an option.
The solution services a wide number of geographic locations - all members of the one guest SSID and mobility group. Since clients that connect to this are effectively DMZ'd and only able to connect to the internet, I am struggling to find a practical way to provide printing specific to each geographic site without going for a cloud service such as "Drop-box", or "PrinterON"
Has anyone out there in the Community come up with any innovative approaches to this connundrum? If so please join the conversation

Hi, I've encountered the same issue. Did you find a solution?

Snmp error for guest access ticket on two WLC

Hi,
I have one wcs (5.0.56.2) and two wlc 4400 ( 5.0.148.2). When i try to create a ticket for guest access on the two wlc without time restriction, it works well. But when I defined time restriction for the ticket, i have a snmp error on the passive wlc (snmp operation to device failed, attempt to set conflicting attribute value) and not on the active xlc.
Thks.

The lobby ambassador can specify the amount of time that the guest user accounts remain active. After the specified time elapses, the guest user accounts expire automatically.
The local user database is limited to a maximum of 2048 entries and is set to a default value of 512 entries (on the Security > General page). This database is shared by local management users (including lobby ambassadors), net users (including guest users), MAC filter entries, and disabled clients. Together these cannot exceed the configured database size.
For the configuration following URL may help you
http://www.cisco.com/en/US/docs/wireless/controller/5.0/configuration/guide/c5users.html

Cisco FlexConnect flow for guest.

Hi all,
We are planning to upgrade our wireless infrastructure and I need some verification on the configuration. Our current setup is the following:
We have 2 WiSMs on the HO as active/backup and one 4400 series as an anchor. All access points are in HREAP with the interface configured as access (not trunk). It is local switching and central authentication.
We are planning to upgrade the wireless and instead of using anchor controller, we will use another interface on the 5508 controllers for the guest. This is a separate interface.
The question is: Can the guest traffic go thgouth the AP to the guest without re-configuring every AP to trunk?
TIA,
Nicos Nicolaides

Thank you,
So basically for everyone to understand the question in the future,
our setup has the controller on a layer 3 network,
we have multiple SSIDs (more than 2),
All of our APs are configured in access mode.
So you can configure each SSID to be either CAPWAP or FlexConnect right?

Cannot enable parental controls for Guest if FileVault enabled

FileVault is enabled on my Mac. When I subsequently enabled Find My Mac, the Guest User account was automatically enabled, as it is required for Find My Mac's theft recovery feature. When I accessed the Guest User in the Users & Groups Preferences panel, the "Enable parental controls" option for Guest User was greyed out. Thus, anyone with physical access to my computer, such as my kid, can gain unfettered access to the Internet without a password.
I did find a solution. I unchecked the "Allow guests to log in to this computer" box in the Preferences panel. This caused the "Enable parental controls" box to become checked (seems to be a bug). I then checked the "Allow guests to log in to this computer" box, which caused the "Enable parental controls" box to become unchecked. At this point, the "Enable parental controls" box was no longer greyed out, and I was able to check it.
System: Late 2014 Retina iMac with 3.5 GHz Intel Core i5, 8 GB memory, OS 10.10

Update: Although the method above appeared to enable parental controls, they do not work. When I log in as Guest (causing the computer to reboot into Safari-only mode), I am able to access a very well-known adult website (play*** dot com).

I Need software or portal for sending bulk sms for free.!!!

Hi Blackberrians,
I am a young IM and i have a big problem. Thank God i have identified the problem. Well, i pray someone will help me out here.
I need a way in which i can send bulk sms (in thousands) without any payment. I need it to promote my service in my region. I have the phone numbers in thousands already.
If you know any software that can enable internet to phone bulk sms sending without a fee. (I can afford to purchase the software if i won't pay any other fee to send the bulk sms). Kindly post me a reply here.
I came across many portals while google searching but, they seems to be fake. (I sent msg to my personal phone but it never delivered).
If you have a solution, kindly help me out.
I will be glad you do so.
Thanks
Ritchie Blackmore
Mobile Advertising
www.txt2get.com

There's not a good app for this ON the BlackBerry... for obvoius reasons (spam).
And free? Doubtful.
Personally, because of the obvious spam generated by software just as this, I hope it's all shut down, but that's my personal opinion.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Delete an evenment with guests without send us the update

Hy
First, I'm sorry for my english
I would to know if is it possible to delete an evenment with guests without send us the update?
thanks

up?

Send sms from Labview without LabVIEW 8.0 PDA module

Does anyone can send sms from Labview without LabVIEW 8.0 PDA module?

You can get a wireless (GSM) modem for the pc. There have been some discussions here that you can do search for. One is http://forums.ni.com/ni/board/message?board.id=170&message.id=142443&view=by_date_ascending&page=1.

HT202724 How i can send multiple sms from mac without being a group message ?

How i can send multiple sms from mac without being a group message ?

Start new conversations, one for each recipient.

2504 with new-architecture enabled breaks MAC auth for guest access

Hello,
We have (2) 2504 WLC running version 7.6.120. WLC1 is the local controller and WLC2 is an achor controller for guest-access. We need to incorporate a 3850 for use with the WLC2 anchor. The guest access is currently working with Mac-Auth and Mac-Auth-Fail to Web-Auth.
When converged access is enabled on the WLC1 and WLC2, the MAc-Auth no longer works. That is, the previously authenticated user is now redirected to the Web-Auth page. The local controller shows the user as authenticated but the Anchor controller shows the state as WEb-Auth-REQD.
Rolling back using "config mobility new-architecture disable" and rebooting resolves the issue.
Does anyone what changes from the old to the new that would break this mac-auth/web-auth configuration?

You should reach TAC for these sort of issues. Not many people deploying this CA setup yet & you may not get direct feedback immediately.
HTH
Rasika

SMS for guest without sponsor

Similar Messages

Maybe you are looking for