Sms in enroute state please help

hi all,
From an ESME we are sending sms through smpp and the client code gets the smsc ok response still its not able to deliver the message for a long time and some times it dont even deliver the sms .We tried with the different sending priorities like min norm high ,still the issue is not closed .While enquiring it says that the message is in enroute state.Upto my understanding the problem is in SMSC, but still they are not able to trap it out. If anybody worked with an smsc server can help us atleast which would be great. If the posted info is not enough i will give more info as u need.Hope I will get help
Thanks in advance.

Hi,
I used 2 programs with smpp 3.4 spec to test the submit function of the test class in smppapi. I made 2 queries with their messageid and found the followings:
Success: Query response (query_resp: (pdu: 44 80000003 0 3) 4651A8CA 040820032314032+ 2 0 )
Failure: Query response (query_resp: (pdu: 28 80000003 0 3) 610CBF1E 1 0 )
May I ask what reasons will cause that failure of sending a SMS? '1' seems the enroute state.
Thanks

Similar Messages

  • HT1430 I m unable to send sms thru any career , please help me.

    I m unable to send sms thru any career , please help me.

    SMS is a carrier feature.
    Contact the carrier to troubleshoot.

  • Control Break Statements ----- Please Help me

    I have some idea about the control-break statements(AT-ENDAT). Can any one please give me the example ?
    Thanks in Advance. Points will be rewarded immediately.

    sample program for AT events
    Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
    DATA: BEGIN OF ITAB OCCURS 0,
    F1 TYPE I,
    F2(6) TYPE C,
    F3(10) TYPE N,
    F4(16) TYPE P DECIMALS 2,
    END OF ITAB.
    DATA: SUB_TOT(10) TYPE P DECIMALS 3.
    **--1
    ITAB-F1 = 1.
    ITAB-F2 = 'ONE'.
    ITAB-F3 = 10.
    ITAB-F4 = '1000.00'.
    APPEND ITAB.
    CLEAR ITAB.
    ITAB-F1 = 1.
    ITAB-F2 = 'ONE'.
    ITAB-F3 = 20.
    ITAB-F4 = '2000.00'.
    APPEND ITAB.
    CLEAR ITAB.
    ITAB-F1 = 1.
    ITAB-F2 = 'ONE'.
    ITAB-F3 = 30.
    ITAB-F4 = '3000.00'.
    APPEND ITAB.
    CLEAR ITAB.
    *--2
    ITAB-F1 = 2.
    ITAB-F2 = 'TWO'.
    ITAB-F3 = 10.
    ITAB-F4 = '1000.00'.
    APPEND ITAB.
    CLEAR ITAB.
    ITAB-F1 = 2.
    ITAB-F2 = 'TWO'.
    ITAB-F3 = 20.
    ITAB-F4 = '2000.00'.
    APPEND ITAB.
    CLEAR ITAB.
    ITAB-F1 = 3.
    ITAB-F2 = 'THREE'.
    ITAB-F3 = 10.
    ITAB-F4 = '1000.00'.
    APPEND ITAB.
    CLEAR ITAB.
    ITAB-F1 = 3.
    ITAB-F2 = 'THREE'.
    ITAB-F3 = 20.
    ITAB-F4 = '2000.00'.
    APPEND ITAB.
    CLEAR ITAB.
    SORT ITAB BY F1.
    LOOP AT ITAB.
    AT FIRST.
    WRITE: /35 ' MATERIAL DETAILS:'.
    ULINE.
    ENDAT.
    AT NEW F1.
    WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
    ULINE.
    ENDAT.
    WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
    SUB_TOT = SUB_TOT + ITAB-F4.
    AT END OF F1.
    ULINE.
    WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
    CLEAR SUB_TOT.
    ENDAT.
    AT LAST.
    SUM.
    ULINE.
    WRITE: 'SUM:', ITAB-F4.
    ULINE.
    ENDAT.
    ENDLOOP.
    Reward points if helpful.
    Rgds,
    Abhishek

  • Missing Return Statement - Please Help

    I get the "missing return statement" in line 47 in the getNumber method when I try to compile. Any suggestions?
    import java.util.Scanner; //imports scanner
    import java.util.Random;  //imports class Random
    public class Guess {
        Random randomNumbers = new Random();
        int answer;
        int userGuess;
        public void newGame()
            int answer = getNumber();
        public void play()
           Scanner input = new Scanner( System.in ); //creates scanner input
           System.out.println("\n\n Guess a number between 1 and 1000 or just" +
                   "press 0 to exit:" );
           userGuess = input.nextInt();
           while (userGuess != 0);
               checkUserGuess();
               System.out.println("Please enter another guess:");
               userGuess = input.nextInt();
        public int getNumber()
           int answer = 1 + randomNumbers.nextInt( 1000 );
        }  //ERROR IS DISPLAYED HERE
        /** Creates a new instance of Guess */
        public void checkUserGuess()
            if ( userGuess >= answer)
                System.out.println("Your guess is too high, try again");
            else
                if ( userGuess <= answer)
                    System.out.println("Your guess is too low, try again");
                else
                    System.out.println("Congratulation, you guessed correctly");
    }

    The error message says it all.
    You declared your getNumber method as returning integer.
    However you didnt return any number.
    add the reutrn statement to the method
    return answerJust to add, you have declared answer as global
    variable and agian answer as local variable.
    You are messing up a little there.
    Message was edited by:
    lupansansei

  • SQL STATEMENT , PLEASE HELP

    Hi,
    I want some help in writing a SQL Query .Its besically a hierarchical query. Let me lay down the table structure first to explain my requirements better.
    PORP_TABLE(NODE_LEVEL int, WBS_ID int, WBS_NUMBER varchar(60), LFT int,RGT int)
    SELECT NODE_LEVEL, WBS_ID, LFT,RGT FROM PROPOSAL_WBS PW WHERE PROPOSAL_REV_ID = 7000
    (SAMPLE DATA)
    NODE WBS
    LEVEL WBS_ID NUMBER LFT RGT
    0 7055 ROOT 1 24
    1 7056 1 2 5
    1 7088 2 6 9
    2 7057 1.1 3 4
    2 7089 2.1 7 8
    2 7091 3.1 11 14
    2 7103 3.2 15 16
    2 7105 4.1 19 20
    1 7090 3 10 17
    3 7092 3.1.1 12 13
    1 7104 4 18 23
    2 7106 4.2 21 22
    ALLOCATION_DETAIL( WBS_ID int, COST_ID int, PERIOD Date, AMOUNT Float)
    sample data
    WBS_ID , COST_ID , PERIOD , AMOUNT
    7057 100 01-jan-2005 5000
    7057 100 01-feb-2005 2000
    7057 100 01-mar-2005 1000
    7057 100 01-apr-2005 6000
    7057 100 01-may-2005 3000
    7057 100 01-jun-2005 45000
    7106 100 01-mar-2005 8000
    7106 100 01-apr-2005 7000
    7106 100 01-may-2005 9000
    Now the PORP_TABLE has got the parents and childs. Only the leaf nodes in the hierarchy has the values stored in the ALLOCATION_DETAIL table. Now here is the scenario
    In the example 7055 is the root WBS . The Leaf WBS are the one with max extension in the wbs number ( in this case it is 1.1, 2.1, 3.1.1, 3.2, 4.1 and 4.2)
    Now the Starting period for each leaf node in the ALLOCATION_TABLE could be differrent . What that means is WBS 1.1 could start in Jan -2003 and WBS 3.1 Could be Jul-2005 . So the ending perios are also differrent for differrent WBS . Some can span 2 years some can 5 years.
    So how to write a query so it retrieves the value for all the Wbs starting from the MIN ( PERIOD ) upto the MAX(PERIOD), and it should roll up also. Now there is No connect by Prior or any analytic functions available for this . THIS NEEDS TO BE DONE ONLY THROUGH TRADITIONAL SQL STATEMENT . And NO DB FUNCTIONS CAN BE USED .
    Now if the WBS is a parent node then it should have the sum of all its child nodes for the COST category.
    SO THE RESULT SET SHOULD BRING LIKE THIS
    WBS_NUMBER, PERIOD_NUMER, COST_CATEGORY , AMOUNT
    ROOT
    1
    1.1
    2
    2.1
    3
    3.1
    3.1.1
    3.2
    4
    4.1
    4.2
    ......

    Thanks for all your thoughtfull replies and feedbacks. Yes it is in Sybase platform . Though I have been woking all along in Oracle , Unfortunately this one is in Sybase, and no the customer cant and wont move to Oracle. So I have to work with it . And if you want to see the table structure . Here are they :
    CREATE TABLE PROPOSAL_WBS (
    BURDEN_CENTER_ID      numeric(18,0) NULL,
    START_DATE      datetime NULL,
    END_DATE      datetime NULL,
    WBS_ID      int NOT NULL,
    MODIFIED_DATE      datetime NULL,
    CREATED_DATE      datetime NULL,
    MODIFIED_BY      varchar(127) NULL,
    CREATED_BY      varchar(127) NULL,
    FEE_PERCENT      float NULL,
    PROPOSAL_REV_ID      int NOT NULL,
    PARENT_WBS_ID      int NULL,
    NAME      varchar(127) NULL,
    COMMENT      varchar(255) NULL,
    TARGET_COST      float NULL,
    MONTHS_REMAINING      int NULL,
    DEFAULT_STAFF_FTE      float NULL,
    ANNUAL_GRA_SALARY      float NULL,
    NUMBER_OF_GRA      int NULL,
    MANAGEMENT_ADJUSTMENT_TOTAL     float NULL,
    MA_UNALLOCATED_FUNDS      float NULL,
    FEE_TOTAL      float NULL,
    FEE_UNALLOCATED_FUNDS      float NULL,
    TRAVEL_COMMENTS      varchar(255) NULL,
    ODC_COMMENTS      varchar(255) NULL,
    SORT_ORDER      int NULL,
    LFT      int NULL,
    RGT      int NULL,
    NODE_LEVEL      int NULL,
    WBS_NUMBER      varchar(50) NOT NULL,
    TOTAL_COST      float NULL,
    TOTAL_COST_PLUS_FEE      float NULL,
    PER_MILE_COST      float NULL,
    PER_DIEM      float NULL,
    TAX_RATE      float NULL,
    RENTAL_CAR_PER_DAY_COST      float NULL,
    TAXI_PER_TRIP_COST      float NULL,
    CONSTRAINT PK_PROPOSAL_WBS PRIMARY KEY(WBS_ID)
    CREATE TABLE PROPOSAL_WBS_ALLOC_DETAIL (
    WBS_ID      int NOT NULL,
    OBJECT_CODE_ID      numeric(18,0) NOT NULL,
    PERIOD_NUMBER      int NOT NULL,
    ALLOCATION_AMOUNT     float NULL,
    PERIOD_YEAR      datetime NULL,
    CONSTRAINT PK_PROPOSAL_WBS_AD PRIMARY KEY(WBS_ID,OBJECT_CODE_ID,PERIOD_NUMBER)
    CREATE TABLE WBS_PERIOD (
    PERIOD_NUMBER     int NOT NULL
    CREATE VIEW WBS_COST_CAT AS
    SELECT PROPOSAL_WBS.PROPOSAL_REV_ID,
    PROPOSAL_WBS.WBS_ID,
    PROPOSAL_WBS.NAME, PROPOSAL_WBS.SORT_ORDER,
    PROPOSAL_WBS.NODE_LEVEL, PROPOSAL_WBS.WBS_NUMBER,
    CODES.CODE_ID COST_CATEGORY, CODES.CODE_NAME COST_CAT_NAME
    FROM PROPOSAL_WBS, CODES
    CREATE TABLE CODES (
    CODE_ID      numeric(18,0) NOT NULL,
    CODE_VALUE      varchar(254) NULL,
    CODE_NAME      varchar(254) NULL,
    CODE_TYPE      numeric(18,0) NULL,
    CODE_PARENT_ID     numeric(18,0) NULL,
    CONSTRAINT PK_CODE_ID PRIMARY KEY(CODE_ID)
    So let me explain little bit more . The WBSs are categorized into two differrent types. One as INPUT and the second one as NON INPUT. Now assme the the WBS in a tree structure . So only the LEAF WBSs will have the AMOUNT and they are the INPUT WBSs and all non leaf WBSs are NON INPUT. Now lets say there are 5 LEAF WBSs. Each LEAF WBS will have differrent start period ex: WBS 1.1 starts in January 2003 and goes for 48 periods . WBS 2.1 starts in November 2003 and goes for 35 periods . WBS 3.1 starts in March 2004 and goes for 52 periods. and so on .
    Now as there is no Allocation Amount entry for all other WBSs except the LEAF WBSs. So how do I get the roll up . For example if you imagine the parent of WBS 1.1 is WBS 1 , and the parent of WBS 2.1 is WBS 2 and the Parent of WBS 3.1 is WBS 3 , and the parent for WBS 1, WBS 2, WBS 3 is "ROOT WBS". As I said there is no entry for WBS 1, WBS 2 , WBS 3 and the "ROOT WBS". So how do I have a roll up of the Leaf WBS data for their parent WBSs.
    Now if u think of the data in a matrix report, the WBSs and the COST CATEGORY will be the row values, the Period Numbers will the column values and the Allocation Amount will be the cross values. so lets say the WBS 1 has got two leaf nodes, WBS 1.1 and WBS 1.2 then WBS 1 will have the summed amount for each period starting the minumum period of the two of its leaf nodes and for all the cost categories of both the leaf nodes. and the "ROOT WBS" will have all the cost categories of al the Leaf nodes . for all the periods , period wise.

  • Unsure of syntax for SQL SELECT statement, please help

    I am trying to execute the following SQL statement:
    ResultSet rs = stB.executeQuery("SELECT quantity FROM stocklevels WHERE code=salesCode[x]");where SalesCode is an integer array and x is a counter used to loop this part of the code. I keep getting the "syntax error - missing operator" message when I run the code and get to this line, can anybody please tell me the correct syntax/form to use? Many thanks.

    Is salesCode an array in Java or in your DB? I don't know anything about SQL arrays, so I'll assume it's in your Java code.
    You want to put the value of salesCode[x] into the query--say 123456. But what you've got is like doing System.out.println("The code = salesCode[x]"); and then wondering why you're seeing "salesCode[x]" instead of "123456. You'd need to do System.out.println("The code = " + salesCode[x]); Similarly, you could take the "salesCode[x]" out of the string literal that's forming the query, in order to have it evaluated as an int and stuffed into the string as "123456". It would be better to use a PreparedStatement though: ps = con.prepareStatement("select .... where code = ?");
    ps.setInt(1, salsedCode[x]);
    rs = ps.executeQuery();

  • Flash Buttons - "i've been there" state - PLEASE HELP !!

    Hi All,
    I am trying to design an interactive flash piece, where, once
    the button has been clicked, it goes to:
    Firstly: a state that says ... "im here"
    When another button has been selected (clicked), the first
    button shows
    a state that says ... "I've already been clicked"
    I've already worked out the first part, but cant work out how
    to do the
    "I've already been clicked" state ... is it actionscript ???
    If so, HOW ???
    Please Help

    Hi All,
    I am trying to design an interactive flash piece, where, once
    the button has been clicked, it goes to:
    Firstly: a state that says ... "im here"
    When another button has been selected (clicked), the first
    button shows
    a state that says ... "I've already been clicked"
    I've already worked out the first part, but cant work out how
    to do the
    "I've already been clicked" state ... is it actionscript ???
    If so, HOW ???
    Please Help

  • Instances stuck in running state--please help

    Hi,
    We have a composite with all synchronous processes with synchronous calls.
    We have a lot of running instances in the EM console and when we check the audit trail and the flow of many instances, the flow is completed successfully but the instances are still present in the running state. Many of the instances are in between the flow and are not completing at all. They are stuck at that point and never complete.
    This we assume was due to some abnormal activity like the database being full or shutting down of composite when bpel instances were in running state.
    Can anyone tell me why such kind of thing had happened and how to handle these cases.
    Thank you.

    R,
    I am assuming that you are also working with SOA Suite 11g.
    I too had the same issue and was tuning the Bpel Engine but i was not able to get rid of it .
    When i submitted a SR they responded that it was bug in 11.1.3 and they are working on it.
    Hoping that we would get a patch soon.
    Thanks,
    Tirumala Dixit.

  • TS2755 Deleted SMS messages keep reappearing - please help

    Hi
    I have an iPhone4 and if I delete an SMS message it reappears a few moments later. how do I make these permently delete?

    Thank OldGnome... I didn't even know that setting existed.  Fixed my problem.  Blonde moment. 

  • Please Help in ORACLE SPOOL File

    Hello All,
    I made oracle Spool file.Generally i m calling a FUNCTION which return a REFCURSOR.
    ----Package Spec------------------------
    CREATE OR REPLACE PACKAGE Axspointrpt IS
    TYPE return_cur IS REF CURSOR ;
    -- # Updates to the SOI and associated CARMA user ids
    FUNCTION F_UPDATION_USERID_RPT RETURN return_cur ;
    END Axspointrpt;
    ----Package Body------------------------
    CREATE OR REPLACE PACKAGE BODY Axspointrpt IS
    FUNCTION F_UPDATION_USERID_RPT
    RETURN return_cur IS
    VCur return_cur;
    BEGIN
    OPEN VCur FOR
    SELECT
    ID_SCTY,ID_SYMBOL,NM_SHORT,S.DT_MNT_LST,S.ID_MNT_LST,LTRIM(RTRIM(CARMA_FINAL.F_Getusername(S.ID_MNT_LST))) USERNAME,DECODE(IN_DELETED,'Y','YES','N','NO') ACTION
    FROM SOI_MASTER S,APP_USER A
    WHERE S.ID_MNT_LST=A.ID_MNT_LST;
    RETURN VCur;
    EXCEPTION
    WHEN OTHERS THEN
    IF (VCur%isOpen) THEN
    CLOSE VCur;
    END IF;
    END F_UPDATION_USERID_RPT ;
    -----------callRPT.sql ------------------
    SET MARKUP HTML ON SPOOL ON HEAD "<TITLE>SQL*Plus Report</title> -"
    SET ECHO OFF
    SET PAUSE OFF
    SET VERIFY OFF
    SET FEEDBACK OFF
    SET HEADING ON
    SET LINESIZE 150
    set PAGESIZE 85
    SET TRIMSPOOL ON PAGESIZE 50
    SPOOL D:\Avinash\employee.htm
    select Axspointrpt.F_UPDATION_USERID_RPT from DUAL;
    clear breaks
    TTITLE OFF
    SPOOL OFF
    SET MARKUP HTML OFF
    SET ECHO ON
    When i run this SQL file then i am getting the procedure name as well as CURSOR STATEMENT along with the table data.I want get Hide the procedure namd,and cursor statement.Please help in this.
    Regards,
    [email protected]

    Hi Avinash,
    Try this:
    create or replace package dump_refcursor_test is
    type return_cur is ref cursor;
    function get_data return return_cur;
    end dump_refcursor_test;
    create or replace package body dump_refcursor_test is
    function get_data return return_cur
    is
    l_cur return_cur;
    begin
    open l_cur for select 'qwerty' from dual;
    return l_cur;
    end get_data;
    end dump_refcursor_test;
    Create a file called spool.sql put it in c:\. Put his in the file:
    SET NEWPAGE 0
    SET SPACE 0
    SET LINESIZE 80
    SET PAGESIZE 0
    SET ECHO OFF
    SET FEEDBACK OFF
    SET HEADING OFF
    SET MARKUP HTML OFF SPOOL OFF
    set sqlprompt "".
    var res refcursor;
    exec :res:= dump_refcursor_test.get_data;
    spool c:\spool_output
    print res
    spool off
    Now go to sql*plus and type this:
    @c:\spool.sql
    This will give you a file with only the data, here "qwerty"
    Regards Pete

  • Can not see my SMS in inbox on my T700, please help

    Hello,
    Since a short time, I can not see / access incoming SMS in the inbox of my T700.
    I can only open them directly when thery arrive from the desktop.
    Please help.
    Thank You
    Gerold

    Check that you have the correct time and date on the phone.

  • Urgent help with If statement please!

    HI Everyone
    Was wondering if anyone can tell me why flash seems to be
    ignoring my If Statements, every time I try to use one it ignores
    the condition and just actions the command. Its driving me crazy.
    I'm sure I must be doing something wrong I just can't work it out.
    I've put;
    on (release) {
    if ((_root.eyeshadow = "Pink") && (_root.lipy =
    "Pink")) {
    _root.correct._alpha =100;
    It seems to just action the _root.correct._alpha = 100;
    even when a different colour is selected.
    I was wondering can flash read a variable from another
    script, because if not it will not know what eyeshadow and lipy
    are. I dont get any error messages though.
    Please help somebody!
    Thank you,
    Stacy.x.

    Thank you that appears to have made the if statement work,
    but now i have another problem.
    It doesn't seem to acknowledge wether these selections have
    been selected.
    I have put in the code for the pink eyeshadow;
    on (release) {
    _root.eyeshadow2._alpha =0;
    _root.eyeshadow1._alpha = 100;
    eyeshadow == "Pink";
    the same code is in all the other selections, with the name
    variations.
    any ideas?
    .x.

  • Please Help !  Exception in closing resultset,statement.

    In an application developed on , i am closing the resultsets and statements in finally block as
    finally {
         if (resultset != null) resultset .close();
         if (statement != null) statement.close();
    the above block does not take care of exceptions that might arise while closing resultset/statement. Please help with this:
    what the conditions exceptions may arise in closing resultset/statements.
    when does the garbage collector free such resources and what are the implications of not catching exception while closing - can this cause database handle leaks.
    Please help!

    I don't know what exceptions might occur, but since the close() method can throw SQLException, your program has to catch it. Maybe if you close twice, the second time will throw an exception? Anyway, it doesn't really matter, you still have to write a try-catch around it. What you do there is up to you -- you could ignore it (which is what I do) or you could end the program with a message.
    When does the garbage collector free those resources? The garbage collector only frees memory. Nothing else. And the garbage collector will free a ResultSet object only when there are no references to it anywhere in your program. That doesn't mean just in code that you wrote, but anywhere in code that's running in your program. For example, the Statement object that produced the ResultSet might hold a reference to it. However, the API documentation for ResultSet does say that when the garbage collector does free a ResultSet object, it will automatically close it.
    However, the best practice is to close ResultSet and Statement objects when you are finished with them, and not rely on garbage collection to clean up after you.

  • Please help me urgently (Problem in using delete statement)

    Hello,
    I want to run delete query where table name should come from a variable .I have written the following procedure but its not working .Could you please help me
    DECLARE
    processtemplatename VARCHAR2(64);
    CURSOR T1Cursor IS
    select Process_template_name from ProcessTemplate
    where PROCESS_template_ID in
    ( select PROCESS_template_ID from PROCESSINSTANCE
    where process_instance_id in
    (select process_instance_id from processinstance where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' ));
    BEGIN
    OPEN T1Cursor;
    LOOP
    FETCH T1Cursor INTO processtemplatename;
    EXIT WHEN T1Cursor%NOTFOUND;
    DELETE FROM processtemplatename WHERE process_instance_id in
    ( select process_instance_id from PROCESSINSTANCE where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' );
    END LOOP;
    CLOSE T1Cursor;
    END;
    I am getting the error
    ERROR at line 19:
    ORA-06550: line 19, column 27:
    PL/SQL: ORA-00942: table or view does not exist
    ORA-06550: line 19, column 15:
    PL/SQL: SQL Statement ignored
    even when i used
    DECLARE
    processtemplatename VARCHAR2(64);
    BEGIN
    processtemplatename := 'example1';
    DELETE FROM processtemplatename WHERE process_instance_id in
    ( select process_instance_id from PROCESSINSTANCE where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' );
    END;
    I am still getting the same error message
    Thanks,
    Salam.

    And BTW you do not need that clumsy CURSOR c.. OPEN c.. FETCH c INTO... CLOSE c etc. It is "reserved" for more complex cases when you cannot use:
    <pre>
    FOR P IN
         select Process_template_name
              from ProcessTemplate
              where PROCESS_template_ID in
                   (select PROCESS_template_ID
                        from PROCESSINSTANCE
                        where process_instance_id in
                             (select process_instance_id
                                  from processinstance
                                  where STATUS = 'PI_COMPLETED'
                                       OR STATUS = 'PI_REMOVED'
    LOOP
         EXECUTE IMMEDIATE
              'DELETE FROM ' || P.Process_template_name ||
                   ' WHERE process_instance_id in
                        (select process_instance_id
                             from PROCESSINSTANCE
                             where STATUS = ''PI_COMPLETED'' OR STATUS = ''PI_REMOVED''
    END LOOP;
    </pre>

  • I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
    Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

Maybe you are looking for