SMS Messages Problem

when i want to create a new text message or to forword one fromk my iphone 4 (ios 6 sopftware) i find an old text in the text field which for i message i sent few days ago for somebody. always for any forword or anew message it shows the same text in the text field, so i have to delete it to write what ever i want to send
help me please ...

Yes i know its not error, just name it error (don't know proper word in engilsh)
No thats happen when it wants batery low, full charged or half empty. About the bedside mode i was using it ones, just for trying, but you 2 times unlock phone and that bedside mode is off? And everything should back to normal? Plus in bedside mode i could see my sms just didn't hear them or see with that red led.
Thats why i'm here if i could find it and fix it i wouldn't be here

Similar Messages

HT3529 Can anyone please help me? I have a SMS message problem

Can anyone please help me? I have iphone 4S.My problem is I can recive an SMS message,but I cannot send.Every time I try to send the message,the delivery fails.I have spoken to Apple India also,but not fruitful result.
<Email Edited By Host>

If you are in India, I'm not sure that dolphin is a supported Apple carrier. I think there are a couple of phone companies in India that officially support the iPhone and not sure that dolphin is one of them.
You can easily check your settings by opening settings and going to General and looking there to see if the settings are correct, but ultimately, sending and receiving of text messages is to do with your phone company and not Apple, so continue with your phone company until they can resolve the issues for you.
Either that, or take your phone into an Apple store or an Apple re-seller and get them to take a look at it for you and check the settings to ensure that they are correct.

My iPhone 4S SMS messaging problem

So yesterday I was just about to reply to a text I received from a friend when I tried sending it would not go through the little exclamation mark came up and I even tried calling the number it immediately said something about phone being disconnected even though I know it is not after having a face to face discussion with that person. I know my number is not blocked because there was no time for them to block it and she said it isn't blocked as we see each other everyday. I did send a message from my iPad 2 using iMessage that worked and went through. For my phone I tried soft reset network reset along with the *228 option 1. I erased the number and added it manually even added the +1 in front of the number, tried a group SMS still no change it is very frustrating!!! Please respond back @verizon so I can get this taken care of.

This is quite a head scratcher, Austin_A2014. It sounds like both devices are iPhones. Did you get the option to 'Try Again'?Try resetting your Network Settings. Here are the instructions..http://tinyurl.com/avvscsj
Please let me know if this helps. I look forward to hearing back from you.
ChaunceyM_VZW
Follow us on twitter @VZWSupport

[SOLVED] SMS Conversation problem after transferring messages

Hi,
After transferring my SMS messages from my Xperia Z to my new Z3c, received messages are added to the existing conversation, but the replies I send appear in a new conversation! Anyone else have this problem? Any ideas how to fix it?
Thanks,
Chris
Update - It turns out that this was due to spaces being present in the mobile number in my contacts after I'd transferred them, I removed the spaces, and it fixed the issue.

This was driving me insane, thanks for pointing out the obvious! :-)

Problem sending a SMS message from mobile phone t809

Hello!
I am trying to send a SMS message from my cell phone. This is Samsung t809 phone with CLDC 1.1 and MIDP 2.0
The code that I am using is next:
MessageConnection smsconn = null;
try
smsconn = ( MessageConnection )Connector.open( "sms://:50000" );
TextMessage txtMsg = ( TextMessage )smsconn.newMessage( MessageConnection.TEXT_MESSAGE );
txtMsg.setAddress( "sms://18885552233" );
txtMsg.setPayloadText( "Hello SMS!" );
smsconn.send( txtMsg );
catch( Exception e )
e.printStackTrace();
System.out.println( e.getMessage() );
form_main.append( "\nError occured!" );
if( smsconn != null )
try
smsconn.close();
catch( IOException e )
e.printStackTrace();
System.out.println( e.getMessage() );
Seems like on cell phone I have an exception because I can see the line "Error occured!"
I have no idea why... :(
Will appreciate any help and comments.
Thank you!
P.S. Oh yes... the phone 18885552233 is not real, I just used my friend cell phone to test. Does not work... :(
Message was edited by:
viva_unix

hello,
when you use smsconn = ( MessageConnection )Connector.open( "sms://:50000" ); it means that you are trying to connect to a sms server. So if you don't have a sms server on your computer, an exception is thrown !
if you just wanna test sms sending, put the phone number in the string like this
smsconn = ( MessageConnection )Connector.open( "sms://123456789" );<b>reference</b>:
http://developers.sun.com/techtopics/mobility/midp/articles/wma/index.html
hope it will help you
peace
supareno

Why is my iPhone 4S breaking up SMS messages that are shorter than 160 characters?

With my iPhone 4S running 5.1, I'll tap out a message that reads on the character counter as less than 160 characters. When I press send, I hear the "sent message" swoosh sound happen twice, as it does when the phone splits a long message into multiple parts.
The recipient confirms that the message does get split into two parts even though its contents did not exceed 160 characters. Through some experimenting, I have determined that it happens with messages that exceed 120 characters. In cases of messages with lengths 120-160 characters, it cuts the last word off and sends it as a separate message.
Why is this happening?
(In addition, checking my Google Voice history also confirms that the messages get split up even though they do not exceed the character limit.)

I'm having the same exact issue. I've only noticed it since I upgraded to IOS 5.1. Unless the SMS message is very short, it gets broken into at least two separate messages when I hit send. I think this is happening even if the message I'm sending is less than 120 characters.
It doesn't bother me either, but like AmZam05 mentions, I feel bad for the recipient who is now getting mulitple SMS messages from me when they would get a single SMS message prior to me upgrading to IOS 5.1.
EDIT: Wanted to add that this is with a Sprint iPhone 4S w/ IOS 5.1. I've also found some forum threads elsewhere speaking of the same problem others are having. There seems to be a "workaround" for this by adding a few blank spaces at the end of your SMS text message, then sending it.

Skype sends SMS message to a wrong contact

This is a weird one. When I select one of my relatives which is save as my Skype mobile phone contact and I send her an SMS, the message is not being delivered to her but rather to a different cell phone No which belongs to her husband who is also one of my Skype phone contacts. I checked their numbers as saved under their profiles and they are both correct. They are both on the same cell phone network, but have very different numbers and they are even not together on the same family plan or similar. So I'm having real problem comprehending why this is happening. When I send her an SMS message using my phone, it goes normally to her phone. But when I do it via Skype it goes to a wrong recipient but he sees my correct phone number displayed one his phone after receiving the message. Does anyone have an idea how to fix this?

Nevermind...I actually dug deeper and found the same thread. I tried to delete this one but couldn't find a way to do it.

IMessages not converting to SMS messages when recipient not in wi-fi area / out of credit

I have an iPhone 5s (iOS 8.1.3) and my daughter and iPhone 4. She often texts me without problem. BUT if I try and reply and she is not in a Wi-Fi area or has run out of credit, the message (in blue) says that it has been delivered but she doesn't receive it. The only way I can send a message to my daughter is to switch off iMessage and try again and send it as a SMS message - which is surely not how it's meant to be? Other friends that are also iPhone users who are unaware of this problem so she doesn't get all her messages until back in a wi-fi area - which as a teenager is really annoying!
I do have the settings "Send as SMS" switched to on - so in theory my daughter should get a SMS as a minimum?
I have reset my phone and the network data but nothing has changed. My daughter is quite fed up on missing out on her messages.
Any ideas?

Solution found. It was simply that the Cellular data was switched off on my daughters phone.

Cant send SMS messages

I am having problems again trying to send a SMS message to a cell phone with ichat. I am always getting a error message that it could not be delivered. Got the message today and had to switch to yahoo Messenger which delivered the message just fine. Anyone know why I am having this problem in ichat?

Hi John,
I cannot est where I am as the SMS texting is only US based computers to US based phones.
Having said that the obvious issues are either AIM are dropping the ball on this one or the Cell Phone End service is not supported by the AIM Service.
9:12 PM Thursday; November 18, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

IMessage immediately sent as SMS message

Hi everyone
I was iMessaging with someone (both have iPhone 6) for a few days, then, one day, I sent them a message. (I did not have the SMS settings turned on). This is what happened:
The iMessage appeared to send as blue, but immediately appeared as undeliverable with the ( ! ), THEN immediately sent as a green Text message. (rather than idling in blue and me manually having to "Send as Text Message", it did all this automatically)
Now, every time I try to message them, my messages can only be sent as SMS messages (the Send button lights up green instead of blue).
I am able to iMessage with my other contacts. Is there a problem on the recipients end for this? I have not heard from them since this incident. Could their phone be dead/unavailable/setting turned off?
Please help!

Why would someone turn off iMessage?
And would they still receive the SMS text sent in lieu of the iMessage?

PC suite export/import breaks SMS messages

Nokia PC suite 6.85.14.1
Windows XP SP2
Phone 6500 classic connected either by Bluetooth or USB
just updated 6500c to 4.84 firmware
an sms message is received and is viewable fine in Inbox
using the phone I move it to Archive, it is still OK
I then export it to PC (drag-n-drop to a folder)
I delete the message in the phone and import (drag-n-drop) back to Archive
The message is there but it does not show sender name (instead I see the date in the header)
When I open the message and click message details, I can see that
To: field contains the actual sender, while Sender: has (no address)
I tried various things including messing with vmg content (putting same TEL: field to both VCARD entries), but on the import to 6500c, it is the same story - as if the import swaps the sender with receiver and clears the sender field
Please also note that at all times, when I view the messages in PC Suite (phone browser) they show correct sender field, I just need to see the same on the actual phone
Is there something I am missing?
Generally I just need to copy old sms messages from 7260, but when importing them they break as described above. I then tried to export a "6500" message and import it back - with same result. So it appears to be a PC Suite issue rather than anything

al_lea, thanks, I already thought about that, but as I said to exlucde any incompatibility issues within vmg I tried a export/import of a "native" sms freshly received on the 6500, and it gives the same problem.
I also tried changing versions to 3.0 manually in the vmg with no luck.
I'm starting to think the message is actually ok, but it's probably the 6500c software that doesn't display them right. When I try to reply to "broken" message, it does go to sender, even though he is not displayed as one
it looks like PC suite export or import strips the empty to: VCARD from inside the vmg, which is fine by the standards but 6500c doesnt like

Copy and paste - can't copy parts of a SMS message

I'm getting really frustrated with the copy part of copy/paste within a SMS. In the SMS - If I tap on any number or word = nothing happens (if nothing is underlined), If I tap on a number underlined = I get the option to phone or skype?? If I double click = nothing happens, If I do a long press I the options to:COPY MESSAGE TEXTFORWARD MESSAGECOPY MESSAGE TO SIM CARDDELETE MESSAGEVIEW MESSAGE DE TAILSADD STAR If I want to copy some text (e.g. phone number, address, anything else) but not the whole SMS I cannot find a way to do it. Anyone else having this problem with SMS messages? Sometimes you need to extract info from the SMS to paste into an entry box on a website for example or to add to contacts etc. Can anyone help?

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Unfortunately, it's not possible to copy parts of a text message in the pre installed messaging application. But if you press a number, you can open it with the phone application and copy the number from the dialer. And if you want to copy an URL, you can open the page and copy it from the URL-field.
If you want parts from a text message, my best suggestion would be to copy the text into a notepad or similar and edit the text. Thereby, you can copy it with the text you want included.

OS 5.0, Storm: URLs in SMS messages stop being clickable after the thread is opened the first time

I'm running 5.0.0.328 on a VZW Storm 9530.
After upgrading, I noticed that URLs in SMS messages and e-mails stop being clickable after a certain time. I'm not sure that this is so much a time issue as it is one with just getting X number of messages then breaking, but it works like this:
Battery Pull occurs
Storm reboots
Look at SMS messages, URLs can be clicked, opening them in the Browser
go on about my day
Get more SMS/eMail messages
Look at SMS messages, URLs can NOT be clicked. Have to be copied/pasted into browser to view.
Battery Pull occurs
Storm Reboots
I can again click on URLs and open them in browser
And that's how it goes. Initially, after a battery pull, the URLs in various SMS are underlined. Clicking them opens them in the browser. OR, I can touch them and hit the BB button, and select Open Link in Browser from the menu.
After some more testing, the problem appears to be related to the threading of SMS messages.
My test case is twitter. ALL my twitter messages are thrown into a single thread (I do NOT want this, by the way, I want individual SMS messages, NOT threads of them). SO let's say, for example, I have 25 SMS messages in the twitter thread. Immediately after the battery pull, I can open the thread, and after a moment, all URLs are underlined, clickable, and if I touch/hold for a second, highlighted and can be opened via the BB menu.
After exiting that thread to do other things, and then coming back to that thread, I have found that OLD SMS messages in the thread (the original 25 that were there when I did the battery pull) are still underlined, clickable, and so forth. However, any NEW messages added to the thread after I opened it the first time, are NOT clickable, NOT underlined.
My theory at this point is that the code that parses the SMS messages in a thread and then underlines the URLs making them usable, only runs that first time, and either does not run, or fails to run, on subsequent openings of that SMS thread.
Thus, if the messages were NOT threaded, then the code would run when each individual SMS was opened, eliminating this problem. OR, having that code run EVERY TIME a thread is viewed, to ensure it does the underlining/grabbing of URLs for new SMS messages.

You're in a user-to-user community support forum.
Do you have a question?
If so, let 'er rip.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Archiving SMS messages offline with PC Suite 6.7

First of all, I'm not a computer expert so I really hope someone can help me! I downloaded PC Suite 6.7 and would like to archive my sms messages (received messages and sent messages) offline on my PC. But it seems that I can only see my messages when my phone is connected to the PC, once I disconnect, the messages are no longer available. This means that I cannot archive my messages. I used to have an old version of Nokia Phone Editor 4.5 with my old cellular which allowed me to do this.
Basically, what I want to do is this:
- Archive my messages on a regular basis so that I can delete them from my phone and free up its memory
- Access these messages even when my phone is not attached to the PC
It seems that I cannot view my Contacts either unless my phone is connected. Why is this? I did not have this problem with Phone Editor 4.5. Should I install an older version of PC Suite?
I am running Windows XP and using a cable connection.
PLEASE HELP ME!!!! I'M GOING CRAZY!!!
Thanks, Michelle

Hi, I don't have a solution either. I have tried copying the files while the phone is connected into a separate folder. The files will copy and they are accesible, but the dates are all messed up. Rather than the date the message was sent, it notes the date the file was created which is the date I copied them. So, messages sent over the course of a week all have the same date and almost the same time.
I have also tried the export message option which makes each message a single cell readable in Excel but that single cell includes everything, the message, date, time, sender...certainly not a convenient way to archive messages.
One main reason I decided to invest in a more expensive Nokia was the belief that there would be a good solution for archiving messages. I am sadly disappointed.

SMS messages delayed in Group Chat

I bought a new iPhone 5s 2 months ago and have since often had issues receiving SMS messages on time in a Group Chat. 4 of us in the chat have iPhones, 1 person has an Android, but it was never an issue before buying the 5s. It also happens when I have a perfect signal. Hours later, I will get a whole slew of messages that were sent earlier in the day, so they are somehow getting stuck and it keeps happening. This has not been an issue for other iPhone users in the Group Chat. Does anyone know what might be causing this and how it can be fixed?
Thanks

diesel vdub wrote:
SMS is a carrier feature, contact the carrier to troubleshoot.
I'm sorry but I already replied to her to "contact her carrier".Did you even read my first line?
If you have NOT something NEW to say ,then do NOT repeat what I just said.I am a new member here,you should embrace new members in this community.
Also I have added possible solutions to her problem.
"This only works if the carrier makes those screens accessible, not all carriers do. In the US they are not accessible, except maybe on an unlocked device."
Did she mention where she lives? Did she mention if she got an unlocked device? No. So how you know?
My answer completed every possible question.FIY it is accessible on an unlocked iPhone ,I am disappointed that you didn't know this.
Thank you.
~iChristos

SMS Messages Problem

Similar Messages

Maybe you are looking for