Sms_option.sample File missing

Sun Java System Messaging Server 6.3 Admin / Reference guide states that there is a sms_option.sample file that we can build off but I've searched the entire server for it and it can not be found. Is this an oversight of the documentation? Anybody know if it is available someplace? Also is it indepth what a typical setup may be like?
I've tried going through the Guides (admin and Reference), but it feels like I'm missing something in the options file.
edit
Forgot the version printout:
Sun Java System Messaging Server 6.3-0.15
libimata.so .3-0.15
SunOS mail01 5.10 Generic_127127-11 Sun4u Sparc SunW,Ultra-Enterprise
Dustin.
Edited by: Caxi on Jun 9, 2008 1:15 PM

Caxi wrote:
Sun Java System Messaging Server 6.3 Admin / Reference guide states that there is a sms_option.sample file that we can build off but I've searched the entire server for it and it can not be found.This is a documentation bug -- the file in question doesn't exist.
I've tried going through the Guides (admin and Reference), but it feels like I'm missing something in the options file.What is the problem you are experiencing. Usually if there is a missing option you will get an error printed in the sms channel debug file.
Sun Java System Messaging Server 6.3-0.15
libimata.so .3-0.15
SunOS mail01 5.10 Generic_127127-11 Sun4u Sparc SunW,Ultra-EnterpriseYou should definitely be upgrading to a later patch as there were a number of sms channel fixes in later revisions e.g. 120228-28 is now available on Sunsolve.
Regards,
Shane.

Similar Messages

  • [svn:osmf:] 13570: Fix bug FM-310: Metadata video sample app missing readme file.

    Revision: 13570
    Revision: 13570
    Author:   [email protected]
    Date:     2010-01-18 09:44:00 -0800 (Mon, 18 Jan 2010)
    Log Message:
    Fix bug FM-310: Metadata video sample app missing readme file.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-310
    Modified Paths:
        osmf/trunk/apps/samples/framework/MetadataVideoSample/MainWindow.as
    Added Paths:
        osmf/trunk/apps/samples/framework/MetadataVideoSample/readme.txt

  • Missing Oracle Reports tutorial sample files

    The Oracle reports tutorial version 10.1.2, which I just downloaded along with Oracle reports, specifies where the sample files can be found in the prerequisites section. It says,
    You can download these files from the Oracle Technology Network (OTN) Oracle Reports 10g page (http://www.oracle.com/technology/products/reports/index.html): click Getting Started with Oracle Reports. Navigate to the index, then click Examples. On the Examples page, you will see a link to Oracle Reports Tutorial.
    There is no "Getting Started with Oracle Reports" on that web page. I've looked around for the sample files for this turorial and I can't find them. Does anyone know where they are located?

    I found the sample code for the Oracle Reports tutorial. It's at:
    http://www.oracle.com/technology/products/reports/htdocs/search.html?cat=ALP&col=EXA&submit=Search

  • Opening plug in settings, sample files, loops, effects, etc

    What application do I need to use to open the plug in settings, sample files, loops, etc.? Some open with quicktime, however, most all of them are pst files. I am new to this and have no idea what that is. The files are there, they just won't open, even if I change them to open with quicktime. Any help would be appreciated.
    Garage band v1.1.0 (26)   Mac OS X (10.4.8)  

    I've tried opening them from within garageband, no success. I went through finder just to see what type of file they were compared to the ones that would open. the ones that will open open with quicktime and are .aif files. The other ones won't open even if I select quicktime as the application to open them with. I know I sound stupid, but I'm kinda new to the digital recording. Am I missing an application or driver or something? Thanks for responding.
      Mac OS X (10.4.8)  

  • [svn:osmf:] 14905: Adding file missing from previous commit.

    Revision: 14905
    Revision: 14905
    Author:   [email protected]
    Date:     2010-03-22 05:37:59 -0700 (Mon, 22 Mar 2010)
    Log Message:
    Adding file missing from previous commit.
    Added Paths:
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/Standard0755.swf
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/readme.txt

    If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • File missing in petstore1.4

    Hi all,
    i unzipped the sample bundle of j2ee1.4 but i got an error while doing asant in the samples/bluprints/petstore1.4/src folder as the instructions say. The error is about java.io.FileNotFoundException: samples/common-ant.xml (No such file or directory). And also sample/common.properties file is missing.
    Can anyone explain me why are these files missing?
    Thank you all.

    Hi luker,
    I think the easies way is to copy the entire samples directory to the following folder, c:\Sun\AppServer\samples or any location that you installed the Sun application server. The missing files is at that location. The problem happens because we install the application server and the sample bundles separately and unfortunately we don't have any file mention this problem.
    Tell me if it works luker
    Regards,

  • TutWD_FlightList_Init .project file missing

    Hello,
    I am trying the TutWD_FlightList_Init tutorial. 
    I have downloaded the project.
    For the first time I could successfully import this project into my workspace , however while creating model i was getting jjava.lang.NullPointerException.
    So also when I tried to import this project for the second time into my workspace , while importing it said .project file missing.
    Can anyone suggest the possible solutions to resolve the issues I am facing.
    Thanks & Regards
    Pooja

    Hi,
    Removing the .metadata folder and restarting NWDS fixed my NWDS as well.
    I think you have to downloaded TutWD_FlightList_Init  this application in SDN right. May be that application having some problem you can create application in own way. I think you are new to webdynpro JAVA right. Please read this [Document|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/web-dynpro-java/_web-dynpro-java/WDJava%20archive/Creating%20a%20Web%20Dynpro%20Application%20Accessing%20ABAP%20Functions.pdf]
    [Web Dynpro Java Sample Applications and Tutorials for SAP NetWeaver 2004|http://www.sdn.sap.com/irj/sdn/nw-wdjava?rid=/webcontent/uuid/503f22f6-b978-2a10-bf97-ddc21267e752]
    Hope this helps!!
    Best Regards
    Vijay K
    Edited by: VijaySAPEP on Feb 21, 2012 5:28 PM

  • New user sample files question

    hello,
    i just installed the personal edition of lumira and want to know if there are any tutorials that use the data that is behind the "try with samples" button in lumira?
    i have watched several tutorials prior to installing the software and i didn't see any that use the sample files.
    i also browsed through some of the user guide for version 1.22 and it didn't use the sample files either, so i figure that i must be missing something.
    any help on how to get started learning lumira would be greatly appreciated.
    thank you

    hi henry,
    i watched several videos prior to installing the software to try and get a feel for what the software has to offer. i "hear" what you are saying about viewing tutorials, but many people don't learn that way. when you are trying to replicate something you see, using different data then the data shown in the video, it is very easy to forget something, then one would have to go back to the video, try and find the spot in the video that covers what you need. all of that back and forth is way too time consuming.
    no, i have no plans on creating training exercises or teaching lumira. my goal is to compare and contrast it with other bi tools.
    i have tons of spreadsheets of data. i imported some and realized that there is no way to change the formatting that i could find. for example, i wanted to add dollar signs to the data. the "display formatting" option doesn't have this feature.
    on the prepare tab, i didn't see any way to do that. perhaps this can be done when you actually create a chart, but i haven't gotten that far. i'm still trying to figure out how to manipulate the data once it's brought into lumira, so to speak.
    it could be me, but i get the feeling that it is best to have the data in the exact format that you need it in prior to importing it.
    hope this better explains why videos aren't working for me.
    thank you
    tracy

  • Bad Sample Files or I'm intoxicated

    I believe you guys may have some miss information in your sample files or the beer I have consumed this evening has comprised my comprehensionfaculties.
    I'm trying to test out the TLF sample files in Flex 3.2 and 3.3 however I am getting compiler errors. I may be missing a .swc that the instructions didn't mention or you may have some outdated references in your sample code.
    The sample files I downloaded and readme are here:
    http://opensource.adobe.com/wiki/display/tlf/Text+Layout+Framework
    The readme suggest that the samples are compatible with Flex 3.2 and indeed give instructions for how to get it working. However, after following the instructions (and figuring out a few of the ambiguous steps) I was able to get almost everything working except a few small things like compiling and actually running the sample. =)
    When I try to compile I am getting the following errors from the SimpleEditor example (the only project I am using):
    Unable to find:flashx.textLayout.conversion.TextConverter
    (is this file in another .swc the instructions missed or perhaps it is Flex 4 class and therefore not compatible with Flex 3.2-3?):
    Undefined method:_textFlow.interactionManager.selectRange
    (has this been changed to setSelection I wonder?):
    Undefined event: StatusChangeEvent.INLINE_GRAPHIC_STATUS_CHANGE
    (could be a typo in your sample code *INLINE_GRAPHIC_STATUS_CHANGED* <--- NOTE: The added “D”
    Any help and guidance would be much obliged.
    PS. you have some hardcoded paths in your sample files that make running the samples a tad vexing.
    -erik

    I have tried downloading the samples and I am able to run them without any issues, may be you have an older version of tlf swc. To get the latest swc and the sdk you can download the source of sdk and swc from svn. Visit the following URL to get the instructions on how to get the source, http://opensource.adobe.com/wiki/display/flexsdk/Get+Source+Code.
    Hope this helps.
    Thank You
    Chetan Sachdev
    http://www.riageeks.com

  • I received a gift card and when I redeemed it an error message said that I had some itunes files missing and that I needed to reinstall itunes.  Will I still have all my credits when I download itunes?

    I received an online gift card for Father's Day.  When I tried to redeem the gift then I received a error message saying I had some itune files missing and I needed to reinstall/download itunes.  Will I still have my previous purchase credits after downloading and reistalling itunes? 

    You will, because the credited funds are on your iTunes account, not the application. When you reinstall iTunes just configure it with your old iTunes account and your credits will be there waiting for you.

  • New itunes update, now itunes wont open keeps saying files missing

    doiwnloaded new update, now itunes wont open saying files missing. help

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • XML publisher report with a template file missing

    I get the following error
    Active template file not found in the template definition <TEMPLATE_NAME> for date <EFFDT>. (235,2515)
    PSXP_RPTDEFNMANAGER.TemplateDefn.OnExecute Name:GetActiveTemplateFile PCPC:15872 Statement:346
    but in
    Reporting Tools > XML Publisher > Report Definition > Template tab
    I did have the setting Effective date, what cause the problem?

    Have a look at following post and run the sql in this post to see if your template definition is missing.
    http://peoplesoft.wikidot.com/xml-publisher-template-file-missing
    You could also run Application Engine PSXPCLEAN to clean orphan rows.
    Are you running the report online or through PeopleCode?
    In last case make sure the effdt is set correct in PeopleCode.
    Also have a look if your server time settings are correct.
    Hakan

  • My iPOD comes up with 13019 error message file missing please help!

    My iPOD Nano will not sync and comes up with an error message 13019 file missing can you pelase help?

    Try rebuilding your iTunes Library:
    (This will cause all devices to see your library as a "new" library)
    1. Open iTunes.
    2. File>LIbrary>Organize Library: Consolidate Files.
    -This process may take some time.
    3. Quit iTunes.
    4. Browse to your iTunes Folder.
    5. Drag the files to the desktop, but leave the folders in place (folders will be iTunes Media, Album Artwork, Previous iTunes Libraries)
    6. Open iTunes.
    7. File>Library>Import Playlist.
    8. Direct iTunes to import the "iTunes Library.xml" that is sitting on your desktop.
    9. Once the process is complete attempt to resync your iPod.
    EE

  • Music files missing/hidden in folder on network hdd

    Hi all,
    I have setup my home net work with a iMac (mountain Lion) backed up by a TimeCapsule and at the back of the TimeCapsule I have a 2TB networked external HDD. My iTunes library is located on this HDD, I take care not to start up iTunes before this networked external HDD has propoerly mounted to avoid any conflicts with links to my itunes library files and folders.
    The other day I noticed a few missing files (the dreaded exclamation mark !), not too bad a figured, I located a few manually but reached some that does my head in...... Out of the whole album there are two files "missing", the other ones play as they should. When I try and locate the missing files the folder comes up empty.....
    I have even checked the songs that do play in the same album....they dont show up either, even though they still play in iTunes (yes, they are all located at the same location). The album was originally ripped from a CD and I don't use iTunes Match or Genius.
    I have tried to find the files by:
    1."open in finder" - files missing / whole folder empty
    2."through finder and located the drive and folder" - files missing / folder empty
    3."copy file location from "get info" and paste into "go to folder" - the file temporarily appears in the finder window but dissapears shortly after / folder yet again empty.
    4. I check the folder "get info" from my finder and it says "zero bytes"
    5. I can't use Search because its on an external HDD and there fore not indexed
    6.I have tried to copy the folder to the desktop but still shows empty....
    7. I have tried to "organise" my library, still no change.
    What the..xxx..is happening..?
    From what I can gather, the files are actually there but not visible through the finder window (even though the folder appears to be 0 bytes).
    The problem being that I can't locate my missing files because I cant see them any more......
    Am I missing something (like show hidden folder on a Mac) or has it got to do with anything else...? How can I fix it..? I have found posts that relate to windows users forced their W7 to show hidden folders but nothing yet on Mac.....
    Help.
    //Fred

    I was lucky to be able to use a PC, that after trying numerous times actually read the external hdd, I quickly copied all files over to a backup hdd and recovered all files. After that I ended up in contact with Western Digital about the incident and they recommended to completely erase (7-pass erase) of the hdd, which ended up taking over 5 days to do. They gave me no reason as to "Why" it would have happened but if I erase and reformatted of the hdd and the problem reoccurred they recommended to get the unit replaced.
    I was lucky to recover all my files.....keep trying on different computers if you can, and copy what you can get hold of. The 7-pass erase will delete pretty much every trace of information on the hdd with no chance of recovery.
    So far since the incident its been running ok but I not longer trust the hdd to be stable. Not a simple nor quick process / solution I'm afraid.
    Good luck!
    Once you have recovered your files (or as many as you can get hold of) and ready to erase the hdd:
    (THIS WILL ERASE ALL YOUR DATA, MAKE SURE YOU HAVE A BACKUP BEFORE PROCEEDING)
    Connect the drive directly to the Mac, open Disk Utility.
    Select the drive and click on the "Erase" tab Select the "7-times zeros" to completely erase the drive.
    Once the erase have completed format the drive to your selection.

  • File process - some files missing in processing

    Hi,
    I am using the below code to create drives on network.
    This exe file is used by ILM as part batch job. The job will pick input files from local drive.
    Query: While executing this job some input files are missing so for them drive is not created. Please let me know what could be the reason and how to resolve? let me know how to avoid file missing without processing?
    System.Diagnostics.Process cmd = new Process();
    cmd.StartInfo.UserName = "ad_user";
    cmd.StartInfo.Domain = "domain";
    cmd.StartInfo.Password = "password";
    cmd.StartInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Hidden;
    cmd.StartInfo.FileName = @"d:\miis\createdrive.cmd";
    cmd.StartInfo.WorkingDirectory = @"d:\miis\";
    cmd.StartInfo.UseShellExecute = false;
    string these_args = string.Format("{0} {1} {2}", domain, ocgsamaccountname, ocgpathtocreate);
    cmd.StartInfo.Arguments = these_args;
    try
    Console.WriteLine(cmd.Start());
    if (!cmd.WaitForExit(15000))
    skip_delete = true;
    jaya

    Found the issue:
    At first glance my itunes music folder looks normal, but after some careful reading of the location data...it turns out all of my music is also stored in a subfolder "MUSIC" in with all the artist names.  I found this after discussing with a genius today while having my battery replaced.  Together we found the issue.
    How?  iTunes at some point started making a MUSIC and MOVIES and maybe some other folders in the iTunes folder.  When I redid my library some time ago, it must have changed the directory and copied all my music to the user/music/iTunes/iTunes Music/Music folder.  This would also explain why I found that sometimes my library took up more data than I had expected.  iTunes would say 45 GB but the folder would say 90GB. 

Maybe you are looking for