SMS Push entry is removed when setting a listener on Blackberry

Hi,
My app is running on a BlackBerry 8700
My app is starting when a sms on port 6001 is received.
When it starts i do 2 things:
- read the content received sms which caused the start
- set a listener on port 6001 to be informed abaut incomming sms while running my app
My problem is, that my push entry is removed when I have once started the application. I think the Listener on Port 6001 removes the push entry.
Has anyone experiences with this problem or already a solution?
thx for ur help!

rhuhman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

When does a sticky entry get removed on CSM

I have one sticky group for multiple vservers and within each vserver is a different serverfarm with the same IPs but each server farm has a different probe. Now if you look in the sticky table there will be only once entry if my sticky is by source IP. My question is if the probe on one of those serverfarms fails taking down a particular server will that server's entry be removed from the sticky table?
And does this function the same way on an ACE as it does on a CSM?
Thank you
Tony.

Tony, the failure of a probe (or even all probes for a real) does not delete a sticky entry. However, when a connection request is made that invokes the sticky, and the real is not operational, then the sticky entry is deleted. I can't seem to gte into my ace to test, but I would expect it to be similar. Matthew

I have downloaded a Maverick OS X 10.9.4 and installed it on my Mac from a USB, and i can't receive a Verification Code via SMS when setting up the iCloud Keychain. Please help

I have downloaded a Maverick OS X 10.9.4 and installed it on my Mac from a USB, and i can't receive a Verification Code via SMS when setting up the iCloud Keychain. Please help.

Hello, Kutoz.
Thank you for visiting Apple Support Communities.
Here is some information that you may find helpful with this issue.
I'm not receiving the verification code via SMS.
Make sure that you have a strong cellular network connection on your phone.
Make sure that your phone number can receive SMS messages. You can do this by asking someone to send you a text message.
Make sure that the correct phone number is associated with your account:
iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
OS X Mavericks v10.9 or later: Choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number listed under Verification number is correct. If not, enter another phone number.
If you can't access a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity to get help completing iCloud Keychain setup.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Jason H.

When setting up my facebook it added all my freind to my phone contact list,how do I remove them?

When setting up my facebook it automaticly added all my friends to my phones contact list,how do I remove them?

This must be manually selected when prompted - this is not done automatically.
Settings > FaceBook > Contacts > Off.

When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!

When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!

Taken at face value, you're having trouble with a QuickTime program file there.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now?

Can anyone tell me how to remove the owner when setting the location

Hello,
Can anyone tell me how to remove the owner when setting the location?
Properties
   Table Name: (Table Name)
   Table Type:   Tables
   Owner:           Public
   Overridden Qualified Table Name: (Table Name - same as above)
Any help would be appreciated.
Thanks
Ann

Hi Ann,
please check this document to determine the correct space for your question:
Find Topic Spaces on SCN (Forums)
If you need help moving it, let me know!
Thanks,
Kristen

How do you remove devices from the device list when setting up 2-step verification for your apple id?

When setting up 2-step verification for my Apple ID, I get a list of devices to verify. My list has my old iPhone 4 and my old iPad, which I don't have either of anymore. Is there a way to remove these devices from the list? Plus, both iPads that are listed don't give any indication of which one is my current iPad and which is my old iPad, so I'm not sure which one to verify. What should I do there.

For reference, I figured out how to identify which iPad was which so I could verify my iPad. I went into the settings on my new iPad and changed the device name, started a iCloud backup (not sure if this was necessary but I wanted to make sure the device name change persited to the cloud) and then was able to see the new name on the device screen for 2-step verification. Hopefully this helps someone if they have a similar problem. I still am not sure how to remove old devices from the list.

Remove headset / handsfree on IP Mobile Phone 7925 - when remove headset, setting don t change

Remove headset / handsfree on IP Mobile Phone 7925 - when remove headset, setting don t change, the phone stay on headset setting and we are oblige to restart the phone to go back to a normal situation.
Regards - Olivier

The driver show up in the hardware list. However, BT does not show up as a choice for the headset in the application. It has in the past, but after the the hard drive was replaced and a new workstation image created, that no longer happened.

Common Abbreviations Used When Setting Up and Troubleshooting HP Printers

Here is a list of common abbreviations and phrases used while trying to troubleshoot network-connected printers within the forums and other web-based support documents:
Ad Hoc – Latin phrase meaning "for this" and is used when describing a type of connection between the printer and computer by-passing the router. This is not the recommended network connection by HP support (see SNC below).
ADF – Automatic Document Feeder which is the tray on the top of a printer used for multipage scans and faxes.
AES – Advanced Encryption Standard used to describe a password-protected router/internet connection.
AiO – All-in-One
AP/STA – Access Point Station or another word for router.
ASIC – Application Specific Integrated Circuit
AWC – Auto Wireless Connect
BIOS – Built Input/Output System
BSOD – Blue Screen of Death
CGD – Color Graphic Display
CMD – Command
CMYK – Cyan Magenta Yellow Black
CNG (tones) – 1100 Hz tone stands for Calling Tones used on landline fax machines.
CPU – Central Processing Unit
CUE – printer version 10-14 also known as Solution Center.
CVN - Card Verification Number on the back of a credit card.
DHCP – Dynamic Host Configuration Protocol
DIM – Digital Imaging Monitor
DMI – Desktop Management Interface
DNS – Domain Name Server
DPI – Dots Per Inch
DSL – Dedicated Service/Subscriber Line or type of digital internet service bundle.
ECM – Error Correction Mode in advanced fax settings.
EIRP – Equivalent Isotropically Radiated Power
EMI – Electromagnetic Interface
ESP – Extended Service Plan
EWS – Embedded Web Server
FFC - Federal Communications Commission regulates all forms of communication.
FoIP – Fax Over IP
FPU – Floating Point Unit
FTF – First Time Fix
GBU – Global Business Unit
GUI - Graphical User Interface or the images on a computer screen or display.
HDMI – High Definition Multimedia Interface which is a type of plug-in to connect a computer to an HD monitor.
HHO – Home and Home Office is the name of the sales department in HP www.hp.com/shopping
HW - Hardware
ICF – Internet Connection Firewall; Integrated Catalog Facility; Intersystem Communications Function
IE – Internet Explorer
IEEE – Institute of Electrical and Electronics Engineers
EMF - Electromagnetic Frequencies
IIC – Individual Ink Cartridge is a type of ink that consists of only one color.
IP – Internet Protocol which is what a router uses to locate another network connected device.
IPG – Image and Printing Group was one of the names of the printing department in HP.
IPH – Integrated Print Head is a type of ink cartridge that has the printhead in it.
IPIPA – Automatic Private IP Addressing also associated with an IP address beginning with 169.xxx.xxx.xxx
IRIS – Integrated Risk Information System often installed with the OCR software and printer driver.
IRQ – Interrupted Request or one of the original chat rooms and communities when the internet was first created.
ISB - Ink System Business
ISDN – Integrated Services Digital Network
ISF – Ink System Failure
ISM – Instrumentation, Scientific and Medical radio band
IVR – Interactive Voice Response
IW – In Warranty
LCD – Liquid Crystal Display
LIFI – optical (light) version of WIFI introduced in 2012
LOI – Low On Ink
LPD – Line Printer Daemon
MAC – Media Access Control
mDNS – Multicast Domain Name Service
MFP - Multi-Function Printer
NAT – Network Address Translation
NDU – Network Diagnostic Utility
NTF – No Trouble Found
NVM – Non-Volatile Memory
OCR – Optical Character Recognition is often installed with the printer drivers to allow you to scan to editable text.
ODD – Optical Disk Drive
OJ – OfficeJet
OOW – Out Of Warranty
OOBE – Out Of Box Experience
OSD – Onscreen Display
PBX – Public Branch Exchange
PCIE – Peripheral Component Interconnect Express
PEN – ink cartridge and printer head
PHA - Print Head Assembly that holds the ink in it (often removed while setting up a replacement printer)
POTS – Plain ‘Ol Telephone System
PPI – Pixels Per Inch
PQ – Print Quality
PSC - Print Copy Scan and quite often refers to the very first all-in-one printers.
PSG – Personal Systems Group which was one of the names used to describe the computer department in HP.
QRG – Quick Reference Guide
RAID – Redundant Array of Independent Disks which is what is usually cleaned up while defragmenting a hard-drive.
RFI – Radio Frequency Interference
RPC - Remote Procedure Call often associated with the scan services.
SNC - Standard Network Connection also known as Infrastructure which includes the printer, computer and a router. **This is the preferred wireless connection supported by HP.
SNMP – Simple Network Management Protocol
SOHO – Small Office Home Office which is a division of printer support.
SSID – Service Set Identifier
SSRD – Support Sent Recovery Disc
SW - Software
T30 – Typical Fax Line and also describes the type of cord used for fax setup.
TAM – Telephone Answering Machine not to be confused with voicemail.
TCP/IP – Transmission Control Protocol/ Internet Protocol used to define the network location of a device (192.168.xxx.xxx) and can be good to know when trying to install a wireless printer on a computer.
TIJ – Thermal Ink Jet which is the means to which ink is heated up so that it drips out of the cartridge.
TKIP – Temporal Key Integrity Protocol that describes the type of encryption used during a password-protected setup on a router.
TWAIN – (Technology Without An Interesting Name) Standard for linking applications and image acquisition devices.
UDP – User Datagram Protocol
UI – User Interface
URL – Uniform Resources Locator also known as a web address or hostname and begins with http://
URP – User Replaceable Part that can be purchased to fix a printer.
USBSOW – Universal Serial Bus Statement of Work
VGA – Video Graphics Adaptor
VoIP – Voice Over IP
VPN – Virtual Private Network
WEP – Wired Equivalent Privacy which also means the passphrase or password for a protected network setup (Wireless Setup Wizard or USB to Wireless installation will ask for this and that is just the password used to get on the internet or to connect a device to your router).
WIA – Windows Image Acquisition is the name of the service used to scan with an HP printer.
WINS – Windows Internet Name Service
WLAN – Wireless Local Area Networking or another type of internet connection.
WOOBE - Wireless Out Of Box Experience often associated with Web-Services setup of ePrint on a new printer.
WPA – Wifi Protected Access or another type of encryption used on a router.
WPAN – Wireless Personal Area Networking
WPS – Wifi Protected Setup often associated with a push button connection on the router instead of using a password. If you have this off then other people in the area can access your router for internet service.
WWAN – Wireless Wide Area Networking
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!
This question was solved.
View Solution.

At one point I was somewhat uneducated as a consumer on certain abbreviations. I began to check around the internet but I never found a complete list of all of the abbreviations used in today’s technological world. Over time I have collected a list of every network and printer-related term in relation to HP. I am happy to share this with the world because sometimes when trying to troubleshoot within the forums and other web-based documents the writers can forget that not everyone knows the abbreviations and if you do not know sometimes you can get left behind and feel frustrated. If you know of any other industry-standard abbreviations regarding printers, faxing, and network-connections feel free to post more here.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Can I edit the size of my photo when setting up an email signature?

Can I edit the size of my photo when setting up an email signature?

Not sure what you mean by "photo screen?" Do you mean your Photo Stream?
In the Photos app there are several ways to view the photos. Tap on Albums. Your Photo Stream is one Album but there may be others including the Camera Roll, albums made on the iPad with photos from the Camera Roll, and albums of photos copied to your iPhone by syncing with your computer.
To remove albums from the Camera Roll, tap on the Camera Roll album to see the small thumbnails of the photos there. Tap on Select, tap on the photos to delete, then tap on the trashcan. The photos will then be moved to another album called Recently Deleted. They remain there for 30 days to allow you time to reconsider whether you really want to delete them or not. After 30 days they will automatically be deleted from your iPhone. But if you are sure you want the photos deleted from your iPhone delete them again from the Recently Deleted album.
Albums created on the iPad with photos from the Camera Roll can be deleted in the same way.
To delete albums copied to your iPhone by syncing with your computer running iTunes are deleted by doing another sync. But before you click on Sync deselect the albums in iTunes. Then when you click on Apply or Sync the albums will be removed from your iPhone but they will remain on your computer.

Excel Calulates twice when set to Automatic in Office 2013

I have had a group of users who have raised an issue with Office 2013 running far slower for a number of spreadsheets. After investigating the fault, I have identified the issue as being due to the way in which Excel appears to be handling the calculations.
When I open the spreadsheet myself, on Office 2013 32 or 64 bit, I am asked to update the data, at which point the spreadsheet runs the calculations if I accept, and then runs them again. If I set this behaviour to manual, I can open the spreadsheet, request
an update, and then manually calculate, which only takes one pass at the data but provides the same results. The behaviour does not persist on an Excel 2010 machine, which does only a single pass on both manual and automatic. The spreadsheet does pull data
from an external sheet, but as this only occurs in Office 2013, I don't believe this to be intended behaviour.
Is there anyone who can shed some insight into why this acts this way, and how to prevent this. We are trying to upgrade our business to 2013, and are getting a huge amount of push back from this particular set of users over this issue

Hi,
According to your description, my understanding is that you want to calculate once time when the file opening or update data.
I suggest you can make the file always calculate manual.
You may try to do following steps:
Click File>Options>Formulas> Calculate Options> Manual
Then you can save it .
For more detail information, please refer to the following link:
http://office.microsoft.com/en-us/excel-help/change-formula-recalculation-iteration-or-precision-HP010054149.aspx
The article applies to Excel 2007, but we can refer to it.
Regards,
George.zhao

Require entry of metadata when creating a folder in a document library

Sharepoint Foundation 2010 -
While users are required to enter metadata when uploading a document, it would be a tremendous help if they were required to enter metadata when creating a folder inside a document library.
Is there a way to force entry of metadata when creating a folder? And if this is possible, can I create different metadata requirements for documents uploaded inside a folder?
Thanks.

Yes, you will need to create a Content Types that inherits the Folder Content Type, and then assign your new Content Type to your library. The following blog post explains how to do this (it was written for 2007 but same applies for 2010),
http://www.sharepoint-guru.com/2007/06/adding-metadata-to-folder.html
You can create additional Content Types to reflect the different types of files, each with their own set of metadata columns and requirements.
Dimitri Ayrapetov (MCSE: SharePoint)

BPM 11g - Human task not removed when interrupting boundary event fired

In BPM 11g (11.1.1.1.3), I am testing a message catch event on the boundary of a human task. It is set for interrupting, so it should, when the event fires, remove the human task from the work list and follow the flow out of the event. The event flow is being followed, but the human task is being left active in the user's work list. I would expect the human task to be removed when the interrupting boundary message event occurs.
I think this is a bug, but would welcome any suggestions on how to solve it. Does anyone know if this works in the latest release (11.1.1.1.4)? We might upgrade pretty soon. Has anyone else tried boundary message events and gotten them to work properly in BPM 11g?
Just FYI....in order to make the BPM message event occur and provide instance correlation, we had to add a mediator and BPEL correlation. We followed process documented in a previous post to do this (http://blog.andrade.inf.br/2011/01/implementing-correlation-in-bpm-11gr1.html). Thanks to whomever posted that...it got us a few steps further along!

I do not think this is bug based on
Oracle® Fusion Middleware Modeling and Implementation Guide for Oracle Business Process Management
23.1.1 Understanding the Relationship Between SOA Composites and SOA Components
"In a similar way, when an interrupting timer or message boundary event arrives to a user task, the BPMN process instance leaves the user task but the associated Human Task remains available. Because the interrupting timer or message boundary event arrived before the user completes the user task, the human task remains unfinished, and you can still access it thought the Worklist application. However running that human task does not have any effect on the BPMN process."
This also gives us big trouble. I am looking for the solution.
Helen

ASP getting removed when updating Template

Hello,
I have a strange problem I can seem to find an answer for.
I'm using Dreamweaver Templates, and on some of my individual pages I am also using ASP code for contact forms.
In theory this code is outside the template and shouldn't be removed when I do a template update because codeOutsideHTMLIsLocked is set to false.
The bolded line of code is the ASP code on my child pages, and everytime I update the template this line of code gets removed. It seems that if I remove the @ symblo the code doesn't get removed. But I don't think it's valid ASP anymore.
<%@ Page Language="C#" CodeFile="default.aspx.cs" Inherits="contactform" ResponseEncoding="utf-8" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
Now when I run an update on my main template, and check my child page, the ASP code will be removed.
The strange thing is that if I use placeholder text instead, it won't be stripped/removed out of the template.
The pain is I have about 10 pages (for now) to add this line to everytime I update the template, which is actually happening more and more now.
Does anyone know why this particular ASP code gets removed any time I update my Main template?
Thanks,
M
/edit: It seems that if I remove the @ from this line, I can the code to "stick" and not be removed.

If I understand correctly, Dreamweaver will treat the area outside the HTML as an editable region when codeOutsideHTMLIsLocked is set to false?
If my maintemplate has this code: /Templates/mainTemplate.dwt
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

And my child page has this code: /products/index.php
<%@ Page Language="C#" ContentType="text/html" CodeFile="default.aspx.cs" inherits="contactform" ResponseEncoding="utf-8" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
Theoretically now when I update the mainTemplate.dwt Dreamweaver shouldn't strip this code out. Correct?
If this being correct, when I use Dreamweaver and update the mainTemplate.dwt it strips this editable region out of the child pages. This is not excepted result, I was excepting that Dreamweaver to leave this code alone in its editable region.
Thanks in advance David,
-M.

ITunes 11.0.4 for Windows keeps restarting and removing my set-up and preferences

iTunes 11.0.4 for Windows keeps restarting and removing my set-up and preferences every time its shut down and re-opened, how can I stop this?
All of the music (etc) is still there but I need to agree to the terms and condition of the 'Software License Agreement for iTunes for Windows' every time I open iTunes.
Once opened there is no personal set-up, such as side menus and how the lists are set-up (e.g showing album images, music listed in ‘most played’ order,etc etc) I know how to re-do all of my settings, Its just getting very annoying now.
Anyone know how to stop this or at least why It is doing it?

I found why it defaults back to the wizard. I noticed in C:/users/(User)/AppData/Roaming/Apple Computer/iTunes/iTunesPerfs.xml file is deleted from this directory upon exiting iTunes. When I manully restore this file itunes starts with my correct settings. Why the .xml file being deleted I don't know. iTunes is deleting the file when you exit so I guess there is just a bug.

SMS Push entry is removed when setting a listener on Blackberry

Similar Messages

Maybe you are looking for