SMS Relay stopped working

Ever since upgrading to iOS 8.1, I've been using SMS relay, no problem with my iMac. Today not so much. When I try to message someone without an iCloud account, I get an error that says they are not registered with iMessage.
Both devices are on the same wireless connection. Text Message Forwarding is turned on on the iPhone and it is paired with my computer. I have rebooted both devices and logged out and back into iCloud on both devices.
Very frustrating!

In Yosemite, deleting the cache from Macintosh HD/Library/Cache and rebooting fixed the problem.

Similar Messages

SMS relay only works with one iMac or Macbook Pro, but not both?

I recently got a new iMac (5K). I already own a Macbook Pro 13" (bought in 2013). When I got the new iMac, I wanted to transfer all my data from my Macbook onto the new iMac, so I used the most recent time machine back-up from my Macbook to install onto the new iMac. No issues there. I also own an iphone 5s and ipad mini (1st generation), all with the most recent software updates. Approximately 1 week ago, SMS relay stopped working between my iMac and my iphone. I could type an SMS text message on my iMac, send it, and although it would transmit to the recipient, it would say "not delivered" on my iMac (it would show up as delivered successfully on my iphone). Consequently any SMS messages received would not show up on my iMac. I use the same login for my macbook pro and my iMac and for some reason my iphone stopped listing my iMac as one of the devices for SMS relay. I was on-line with Apple support for 3+ hours yesterday trying to figure out why this wasn't working. I did an SMC reset which temporarily fixed the problem, but as soon as I tried to use SMS relay with both the macbook pro and the iMac, the phone would only recognize one of them and ultimately always choose the macbook pro.
iMessage chats still sync just fine but the SMS chats do not any more. I was wondering if anyone else had the same issue, and if they did, are there any fixes?
Thanks,
Jon

Both the mini-displayport plugs and TB plugs are physically compatible which is why you can plug it in. But if the iMac has a mini-displayport for video it won't work with the TB display.
Check your System Profile to see if it tells you whether you have a TB port. And if there is no information about that post here or look up for yourself the kind of ports for that model of iMac. System Profiler will give yo that information (click Hardware on the left). From the model information it can be definitively determined whether that imac supports TB.
Also, so long as the Displays system preferences is not showing an Arrangement tab then it is not detecting the second display.

SMS relay from work iPhone to personal iPhone

8.1 and Yosemite installed. I have two 5S', one for work and one personal. Both phones are registered under my single Apple ID.
I'd like to get SMS relay to send texts from the work phone (silver) to the personal phone (gold), so I can leave one phone home and just deal with one phone. SMS relay is working fine between my phones and my Mac.
When I try to select my personal phone from the "Text Message Forwarding" setting, it says to enter the code that is displaying on the iPhone, but no code displays on either phone.
I have made sure that my email is selected under "You can be reached by iMessage at:" on both phones.
Both phones are on the same Wi-Fi subnet and can definitely see each other, as the Phone handoff functionality seems to work fine as one incoming call makes both of them ring.
Any ideas?

This worked for me!
I have an old iPhone 4S that I use around the farm and at the gym. I wanted it to connect using continuity services to my iPhone 6+ which has the mobile service plan attached to it (the 4S does not). I had to turn ON Airplane Mode and then turn on WiFi and Bluetooth. In the FaceTime settings the "iPhone Cellular Calls" is turned on as well.
I can not make OUTGOING calls on the 4S it says I must re-enable Airplane Mode; however, I can receive calls on the 4S as long as the 6Plus is on the same WiFi network.
Hope this helps.

SMS relay not working with non-iMessage users?

One of the features I'm most looking forward to in Yosemite is the ability to text people without iPhones. I attempted to do this tonight, but the message failed to send and the person's name was in red. I got the standard "message failed" note, like I get on my iPhone when a message doesn't go through, but I thought it should have gone through just fine.
More info: the contact is in red, not blue or green, and when I type the phone number I get the "this contact is not registered with iMessage" error message. Of course it's not - the contact is not an Apple user!
My iPhone is an iPhone 6 running iOS 8.0.2 and my Mac is running Yosemite 10.10.
What am I doing wrong?
Thanks!
Michael M

I am fortunate to report that it is, in fact, working for me, as evidenced by the fact that I sent and received an SMS to and from an Android user. There was a bit of a hiccup when I enabled SMS relay on my iPhone, as the code which was required popped up and then canceled itself. Once I canceled the entire process, and re-linked the two (Macbook Air and iPhone 6) the pairing and relay went off without a hitch.
Try this: start from the phone, then the iMac. Only input the code in Messages on your iMac after the link is established. I have a feeling it might not truly be synced yet.

N73 sms tone stopped working

once again the sms tone on my N73 has stopped working AGAIN. My phone does not inform me at all that I have a new sms. Inorder to check I have to go into the messages section of the menu to check. Here is what I have tried
- Soft reset (settings->restore factory defaults)
- Firmware upgrade (i have the latest version now)
- Hard resets (using some code I found)
- Changing profile settings with different tones
- Changing profiles all together
With the exception of the firmware upgrade all of the above have been tried several times.
Any more suggestions. I am sick of this phone and I am about to throw it away. How is this so hard to fixed

Since you have did, that would normally solve the software issue if there is. It is highly provable that you got an intermittent hardware issue, a visit to Nokia Care Center would be a good idea.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

My sms tones stopped working, why?

My sms tones were working fine and then all of a sudden they stopped. I've checked my alerts, sounds and all that good stuff and still nothing. All it does is vibrate. Does anyone know why this happens? or what can I do to fix it?

My iPhone has the very same problem.
I found that this is only happening with original (old) sms sounds (Tri-tone, Chime, Glass, Horn, Bell ou Eletronic). New sounds work fine (Anticipate, Bloom, Calypso, ...). But when I set to any old sound, it only vibrates.
I've already reseted the iPhone. Didn't work.

Getting SMS relay to work with 2 macs

Hey guys,
So I have an iMac (late 2013 running OS 10.10.1) and a Macbook Air. (mid 2013 running OS 10.10.1) I've just noticed that SMS relay (from iPhone 6 running 8.1.1) only wants to work with one of the computers at a time, and on top of that, the devices listed under Text Message Forwarding in settings will have the wrong name.
To try and explain, if I have my iMac set up for SMS relay then in my device options for forwarding I'll have
Quinn's iMac
Quinn's iPad
Nick's Mac
All my devices should be Quinn’s X. However Nick is my first name.
Whereas if I do some jiggery-pokery (signing in and out of iCloud, turn iMessages on and off etc) and set up the MBA first I get this
Quinn's Macbook Air
Quinn's iPad
Nick's Mac
So the correct name for MBA is recognise now, but not the iMac.
It refuses to acknowledge both computers at the same time. The wrong name is always the same and it just switches about depending which computer I set up forwarding on first. And if I try and activate it using the wrong name, nothing happens.
A couple of points which may help to explain this.
The wrong name is my first name and so it's what the device name was originally called when set up, but I change that straight away to just Quinn’s X.
I set up my iMac from a Time Machine back up of my MBA
I think possibly somewhere between the 2 is where it's getting confused. That a) the device names aren't the pre-assigned ones and b) they are set up from the same settings initially.
So my question is this. Has anyone had this problem, and how did they resolve it?
I fear I may have to wipe one of the computers and start over, probably MBA as it’s my secondary computer. Try and rid my settings of what ever it being used to identify both computers. Pain in the arse to do that and would rather not have to so if anyone else has any suggestions let me know
As I said earlier, I've done all the off/on sign out/sign in business with all the devices multiple times and that's doing nothing. Also, I have just noticed, last thing I did was to configure my iMac to be the one to receive SMS relay. Now I’m out of the house with my MBA, my iPhone is showing that as being the computer that is set up and a quick test confirms this.
Man I’m so confused.
Cheers

I have this exact problem now. I can only "pair" my imessage to 1st macbook and 1 iPad. iMessage won't recognize nor sync messages on the second macbook. When I open the imessages screen on the 2nd MBP, the text bubbles are all green indicating I am sending via SMS and not even sending via iMessage (which has blue text bubbles).
This is really a problem because I need 2 mac's, one for home media use and 1 on the road for work use and I love using iMessage.
Help...

HELP ! Outgoing Relay Stopped Working ! 553 Error

Please help,
My company mail can not relay outgoing mail for user. We can send emails within the company just fine. But once send outgoing mail to external email, server kept sending back non-delivery mail notices. As following (an example I am trying to send mail to a google account)
"host aspmx.l.google.com[72.14.213.27] said: 553 sorry,
that domain isn't in my list of allowed rcpthosts (#5.7.1) (in reply to
RCPT TO command)"
I am running on standard implementation of OS X Server 10.6.x, my email server worked just fine in last couple of weeks. And suddenly it is broken for outgoing relay. (I don't know what I have done... on it, changed server name in server preference, maybe, and I have two NIC working, binding to 192.168.0.10 (in LAN), and 192.168.8.10 (DMZ) which has a port forwarding done by my firewall protection box.
Meanwhile, all income mail is just fine to every email user.
Here is my postconf -n, REALLY PLEASE HELP!
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc = [email protected]
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
header_checks = pcre:/etc/postfix/customheaderchecks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
localrecipientmaps =
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 31457280
mydestination = $myhostname, localhost.$mydomain, localhost, yatfai.com, mail.yatfai.com, yatfai-xserver, yatfai-xserver.local, $mydomain
mydomain = local
mydomain_fallback = localhost
myhostname = yatfai-xserver.local
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
ownerrequestspecial = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = corpmail1.netvigator.com
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpsasl_authenable = no
smtpsasl_passwordmaps =
smtpdclientrestrictions = permitsaslauthenticated rejectrblclient zen.spamhaus.org permit
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = rejectinvalid_helohostname
smtpdpw_server_securityoptions = gssapi,cram-md5,login,plain
smtpdrecipientrestrictions = permitsaslauthenticated permit_mynetworks rejectunauthdestination checkpolicyservice unix:private/policy permit
smtpdreject_unlistedrecipient = yes
smtpdreject_unlistedsender = yes
smtpdsasl_authenable = yes
smtpdtlsCAfile = /etc/certificates/yatfai.com.C910ABA40E590FF2A912CF641E9D69DD9DB6807D.chain.pem
smtpdtls_certfile = /etc/certificates/yatfai.com.C910ABA40E590FF2A912CF641E9D69DD9DB6807D.cert.pem
smtpdtls_excludeciphers = SSLv2, aNULL, ADH, eNULL
smtpdtls_keyfile = /etc/certificates/yatfai.com.C910ABA40E590FF2A912CF641E9D69DD9DB6807D.key.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
tlsrandomsource = dev:/dev/urandom
unknownlocal_recipient_rejectcode = 550
virtualaliasdomains = $virtualaliasmaps
virtualaliasmaps =
Many thanks,

Problem solved.
It was my firewall service provider screwed things up by doing smtp intervention and, obvious they did it very wrongly.
Just serve as general alert, I use network-box firewall service, seemed their technician don't know what they are doing in most of time and ever since use them, they have screwed my internet connection many many times.
Message was edited by: CHENTING

Email and SMS notifications stop working occassion...

I recently updated the firmware on my E71 to the latest. I now have an issue where the email and SMS notifications on the home page periodically disappear. Once the notification icons have disappeared, I need to restart my device in order to get the icons back again. This never happened with the old firmware.
Is this happening to anyone else? Thank you.

Sounds like an software issue..
Perhaps you may wanna try reinstall the firmware on your phone or do the following:
- A soft reset by keying in *#7780# when on standby - This will not delete any data but will restore all the settings back to default.
If that does not help then you may wanna try doing a hard reset by keying in *#7370# when on standby - This will reformat the phone. DO NOT FORGET TO DO A BACK UP AS THIS WILL ERASE YOUR ENTIRE PHONE MEMORY.
The security code by default is 12345
Message Edited by kingpin007 on 21-Feb-2009 02:14 PM
Mark me a KUDOS if this has helped...

Can't set up Handoff/SMS Relay

Hi,
I'm using an iPhone 5 w/ iOS 8.1 and a Mac mini (Late 2012) running Yosemite. The problem is I can't get either Handoff or SMS Relay to work.
I made sure to enable Handoff in FaceTime settings and System Preferences on my Mac, Wi-Fi is also on on both devices, but neither of these features work.
There's another issue with SMS Relay: when I try to set it up on iPhone it tells me to enter the code shown on my Mac, but the problem is it never actually shows me any code.
I'm not really sure if it's a problem with the iPhone or Mac or both.
Any ideas, guys?
Thanks!

Nobody can tell you anything without proper system info or other technical details.
Mylenium

SMS relay via Iphone 6 NOT working - why?

Hey all.
So I upgraded to Yosemite. Looks nice.
The "receive calls on your Mac" feature works fine on both my MacBook Air and my iMac. Not sure how much I'll use it though.
However, the function where you can send non iMessage texts via iMessage (i.e. regular SMS) is NOT working for some odd reason.
I get the usual "red" on the name I'm trying to send a message to and an error pop-up that this person is not hooked up to iMessage.
Shouldn't this just work? Or is there something I need to do tick off first?
I can place calls on my iPhone 6 via my Macs just fine - it's just the SMS function that's not active for some reason.
Hope someone can help - because this is a function I've really looked forward to and know I'll be using a LOT.
Best,
Jesper

I saw somewhere else in the forums that this feature would work as of iOS 8.1 due out Monday.... but honestly don't know if there's any basis to that... it's just a couple of days... why don't you wait and install iOS 8.1 on your phone and then try again...

SMS Auto-Correction Stops Working

I've noticed lately that sometimes I'll be typing and my iPhone's Auto-Correction feature stops working. For example if I were to accidentally type "dod", it would normally correct it and change it to "did". Or if I don't capitalize " i ", it'll change it to " I ". Lately however, this feature hasn't been consistently working and it's becoming increasingly annoying to have to meticulously type out each individual character. Any ideas what might be causing this, or how I could fix it?
Thanks in advance!

You might have inadvertently stored some incorrect spellings in your keyboard dictionary. You can reset it by going to Settings -> General -> Reset -> Reset Keyboard Dictionary.
Check this page for hints on using the keyboard dictionary: http://www.apple.com/iphone/how-to/#basics.dictionary

DFS replication stopped working and cannot be debugged because WMI repository cannot be accessed

Hello,
two days ago our DFS replication suddendly stopped working sometime around midnight local time. At least this is what our second domain controller is reporting. Event log is flooded with event id 5002 from DFSR. It is unclear what caused this sudden problem
and even worse, how to solve it. First thing I tried was to perform propagation tests. According to propagation report none of them was successful. Creating an integrity report brought me to another problem: It fails with two errors. First it is unable to
connect to the other DC. Second it is unable to access local WMI repository. This is true for both machines.
First I tried to find information on possible problems with WMI. WMIdiag provided a lot of information. However, opinions I found on the net largely disagree whether output from WMIdiag is useful or not. Yet I tried to re-compile .mof files and rebuild the
repository. So far, nothing changed. This is my output from WMIdiag:
34309 13:02:46 (0) ** WMIDiag v2.1 started on Donnerstag, 22. Mai 2014 at 12:49.
34310 13:02:46 (0) **
34311 13:02:46 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
34312 13:02:46 (0) **
34313 13:02:46 (0) ** This script is not supported under any Microsoft standard support program or service.
34314 13:02:46 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
34315 13:02:46 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
34316 13:02:46 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
34317 13:02:46 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
34318 13:02:46 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
34319 13:02:46 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
34320 13:02:46 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
34321 13:02:46 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
34322 13:02:46 (0) ** of the possibility of such damages.
34323 13:02:46 (0) **
34324 13:02:46 (0) **
34325 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34326 13:02:46 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
34327 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34328 13:02:46 (0) **
34329 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34330 13:02:46 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'COM\ABCDEF' on computer 'DC2'.
34331 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34332 13:02:46 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
34333 13:02:46 (0) ** INFO: => 1 possible incorrect shutdown(s) detected on:
34334 13:02:46 (0) ** - Shutdown on 01 April 2014 10:20:54 (GMT-0).
34335 13:02:46 (0) **
34336 13:02:46 (0) ** System drive: ....................................................................................................... C: (Datenträgernr. 0 Partitionsnr. 1).
34337 13:02:46 (0) ** Drive type: ......................................................................................................... SCSI (Adaptec Array SCSI Disk Device).
34338 13:02:46 (0) ** There are no missing WMI system files: .............................................................................. OK.
34339 13:02:46 (0) ** There are no missing WMI repository files: .......................................................................... OK.
34340 13:02:46 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
34341 13:02:46 (0) ** AFTER running WMIDiag:
34342 13:02:46 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
34343 13:02:46 (0) ** - Disk free space on 'C:': .......................................................................................... 10665 MB.
34344 13:02:46 (0) ** - INDEX.BTR, 4276224 bytes, 22.05.2014 12:52:30
34345 13:02:46 (0) ** - MAPPING1.MAP, 67248 bytes, 22.05.2014 12:52:30
34346 13:02:46 (0) ** - MAPPING2.MAP, 67168 bytes, 22.05.2014 12:48:33
34347 13:02:46 (0) ** - OBJECTS.DATA, 23126016 bytes, 22.05.2014 12:52:30
34348 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34349 13:02:46 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
34350 13:02:46 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
34351 13:02:46 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
34352 13:02:46 (0) ** => This will prevent any WMI remote connectivity to this computer except
34353 13:02:46 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
34354 13:02:46 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
34355 13:02:46 (0) ** - 'Windows Management Instrumentation (WMI-In)'
34356 13:02:46 (0) ** - 'Windows Management Instrumentation (ASync-In)'
34357 13:02:46 (0) ** Verify the reported status for each of these three inbound rules below.
34358 13:02:46 (0) **
34359 13:02:46 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' group rule: ............................................. DISABLED.
34360 13:02:46 (0) ** => This will prevent any WMI remote connectivity to/from this machine.
34361 13:02:46 (0) ** - You can adjust the configuration by executing the following command:
34362 13:02:46 (0) ** i.e. 'NETSH.EXE ADVFIREWALL FIREWALL SET RULE GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
34363 13:02:46 (0) ** Note: With this command all inbound and outbound WMI rules are activated at once!
34364 13:02:46 (0) ** You can also enable each individual rule instead of activating the group rule.
34365 13:02:46 (0) **
34366 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34367 13:02:46 (0) ** DCOM Status: ........................................................................................................ OK.
34368 13:02:46 (0) ** WMI registry setup: ................................................................................................. OK.
34369 13:02:46 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
34370 13:02:46 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
34371 13:02:46 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
34372 13:02:46 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
34373 13:02:46 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
34374 13:02:46 (0) ** this can prevent the service/application to work as expected.
34375 13:02:46 (0) **
34376 13:02:46 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
34377 13:02:46 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
34378 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34379 13:02:46 (0) ** WMI service DCOM setup: ............................................................................................. OK.
34380 13:02:46 (0) ** WMI components DCOM registrations: .................................................................................. OK.
34381 13:02:46 (0) ** WMI ProgID registrations: ........................................................................................... OK.
34382 13:02:46 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
34383 13:02:46 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
34384 13:02:46 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
34385 13:02:46 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 1 WARNING(S)!
34386 13:02:46 (0) ** - ROOT/MICROSOFTACTIVEDIRECTORY, ReplProv1, replprov.dll
34387 13:02:46 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
34388 13:02:46 (0) ** This can be due to:
34389 13:02:46 (0) ** - the de-installation of the software.
34390 13:02:46 (0) ** - the deletion of some files.
34391 13:02:46 (0) ** => If the software has been de-installed intentionally, then this information must be
34392 13:02:46 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
34393 13:02:46 (0) ** the provider registration data.
34394 13:02:46 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\MICROSOFTACTIVEDIRECTORY path __Win32Provider Where Name='ReplProv1' DELETE'
34395 13:02:46 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
34396 13:02:46 (0) ** You can retrieve the missing file from:
34397 13:02:46 (0) ** - A backup.
34398 13:02:46 (0) ** - The Windows CD.
34399 13:02:46 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
34400 13:02:46 (0) ** - The original CD or software package installing this WMI provider.
34401 13:02:46 (0) **
34402 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34403 13:02:46 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
34404 13:02:46 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
34405 13:02:46 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
34406 13:02:46 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
34407 13:02:46 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
34408 13:02:46 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
34409 13:02:46 (0) **
34410 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34411 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\ANONYMOUS LOGON' has been REMOVED!
34412 13:02:46 (0) ** - REMOVED ACE:
34413 13:02:46 (0) ** ACEType: &h0
34414 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34415 13:02:46 (0) ** ACEFlags: &h0
34416 13:02:46 (0) ** ACEMask: &h7
34417 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34418 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34419 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34420 13:02:46 (0) **
34421 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34422 13:02:46 (0) ** Removing default security will cause some operations to fail!
34423 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34424 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34425 13:02:46 (0) **
34426 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34427 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
34428 13:02:46 (0) ** - REMOVED ACE:
34429 13:02:46 (0) ** ACEType: &h0
34430 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34431 13:02:46 (0) ** ACEFlags: &h0
34432 13:02:46 (0) ** ACEMask: &h7
34433 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34434 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34435 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34436 13:02:46 (0) **
34437 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34438 13:02:46 (0) ** Removing default security will cause some operations to fail!
34439 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34440 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34441 13:02:46 (0) **
34442 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34443 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
34444 13:02:46 (0) ** - REMOVED ACE:
34445 13:02:46 (0) ** ACEType: &h0
34446 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34447 13:02:46 (0) ** ACEFlags: &h0
34448 13:02:46 (0) ** ACEMask: &h7
34449 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34450 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34451 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34452 13:02:46 (0) **
34453 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34454 13:02:46 (0) ** Removing default security will cause some operations to fail!
34455 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34456 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34457 13:02:46 (0) **
34458 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34459 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34460 13:02:46 (0) ** - REMOVED ACE:
34461 13:02:46 (0) ** ACEType: &h0
34462 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34463 13:02:46 (0) ** ACEFlags: &h0
34464 13:02:46 (0) ** ACEMask: &h1F
34465 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34466 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34467 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34468 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34469 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34470 13:02:46 (0) **
34471 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34472 13:02:46 (0) ** Removing default security will cause some operations to fail!
34473 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34474 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34475 13:02:46 (0) **
34476 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34477 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
34478 13:02:46 (0) ** - REMOVED ACE:
34479 13:02:46 (0) ** ACEType: &h0
34480 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34481 13:02:46 (0) ** ACEFlags: &h0
34482 13:02:46 (0) ** ACEMask: &h1F
34483 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34484 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34485 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34486 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34487 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34488 13:02:46 (0) **
34489 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34490 13:02:46 (0) ** Removing default security will cause some operations to fail!
34491 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34492 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34493 13:02:46 (0) **
34494 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34495 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
34496 13:02:46 (0) ** - REMOVED ACE:
34497 13:02:46 (0) ** ACEType: &h0
34498 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34499 13:02:46 (0) ** ACEFlags: &h0
34500 13:02:46 (0) ** ACEMask: &h1F
34501 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34502 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34503 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34504 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34505 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34506 13:02:46 (0) **
34507 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34508 13:02:46 (0) ** Removing default security will cause some operations to fail!
34509 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34510 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34511 13:02:46 (0) **
34512 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34513 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34514 13:02:46 (0) ** - REMOVED ACE:
34515 13:02:46 (0) ** ACEType: &h0
34516 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34517 13:02:46 (0) ** ACEFlags: &h0
34518 13:02:46 (0) ** ACEMask: &h1F
34519 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34520 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34521 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34522 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34523 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34524 13:02:46 (0) **
34525 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34526 13:02:46 (0) ** Removing default security will cause some operations to fail!
34527 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34528 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34529 13:02:46 (0) **
34530 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34531 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
34532 13:02:46 (0) ** - REMOVED ACE:
34533 13:02:46 (0) ** ACEType: &h0
34534 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34535 13:02:46 (0) ** ACEFlags: &h0
34536 13:02:46 (0) ** ACEMask: &h1F
34537 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34538 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34539 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34540 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34541 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34542 13:02:46 (0) **
34543 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34544 13:02:46 (0) ** Removing default security will cause some operations to fail!
34545 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34546 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34547 13:02:46 (0) **
34548 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34549 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
34550 13:02:46 (0) ** - REMOVED ACE:
34551 13:02:46 (0) ** ACEType: &h0
34552 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34553 13:02:46 (0) ** ACEFlags: &h0
34554 13:02:46 (0) ** ACEMask: &hB
34555 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34556 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34557 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34558 13:02:46 (0) **
34559 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34560 13:02:46 (0) ** Removing default security will cause some operations to fail!
34561 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34562 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34563 13:02:46 (0) **
34564 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34565 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34566 13:02:46 (0) ** - REMOVED ACE:
34567 13:02:46 (0) ** ACEType: &h0
34568 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34569 13:02:46 (0) ** ACEFlags: &h0
34570 13:02:46 (0) ** ACEMask: &h1F
34571 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34572 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34573 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34574 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34575 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34576 13:02:46 (0) **
34577 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34578 13:02:46 (0) ** Removing default security will cause some operations to fail!
34579 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34580 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34581 13:02:46 (0) **
34582 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34583 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
34584 13:02:46 (0) ** - REMOVED ACE:
34585 13:02:46 (0) ** ACEType: &h0
34586 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34587 13:02:46 (0) ** ACEFlags: &h0
34588 13:02:46 (0) ** ACEMask: &h1F
34589 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34590 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34591 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34592 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34593 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34594 13:02:46 (0) **
34595 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34596 13:02:46 (0) ** Removing default security will cause some operations to fail!
34597 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34598 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34599 13:02:46 (0) **
34600 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34601 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
34602 13:02:46 (0) ** - REMOVED ACE:
34603 13:02:46 (0) ** ACEType: &h0
34604 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34605 13:02:46 (0) ** ACEFlags: &h0
34606 13:02:46 (0) ** ACEMask: &h1F
34607 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34608 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34609 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34610 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34611 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34612 13:02:46 (0) **
34613 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34614 13:02:46 (0) ** Removing default security will cause some operations to fail!
34615 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34616 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34617 13:02:46 (0) **
34618 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34619 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\NETWORK SERVICE' has been REMOVED!
34620 13:02:46 (0) ** - REMOVED ACE:
34621 13:02:46 (0) ** ACEType: &h0
34622 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34623 13:02:46 (0) ** ACEFlags: &h0
34624 13:02:46 (0) ** ACEMask: &h1F
34625 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34626 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34627 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34628 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34629 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34630 13:02:46 (0) **
34631 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34632 13:02:46 (0) ** Removing default security will cause some operations to fail!
34633 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34634 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34635 13:02:46 (0) **
34636 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34637 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\LOCAL SERVICE' has been REMOVED!
34638 13:02:46 (0) ** - REMOVED ACE:
34639 13:02:46 (0) ** ACEType: &h0
34640 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34641 13:02:46 (0) ** ACEFlags: &h0
34642 13:02:46 (0) ** ACEMask: &h1F
34643 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34644 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34645 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34646 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34647 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34648 13:02:46 (0) **
34649 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34650 13:02:46 (0) ** Removing default security will cause some operations to fail!
34651 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34652 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34653 13:02:46 (0) **
34654 13:02:46 (0) **
34655 13:02:46 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
34656 13:02:46 (0) ** DCOM security error(s) detected: .................................................................................... 14.
34657 13:02:46 (0) ** WMI security warning(s) detected: ................................................................................... 0.
34658 13:02:46 (0) ** WMI security error(s) detected: ..................................................................................... 0.
34659 13:02:46 (0) **
34660 13:02:46 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
34661 13:02:46 (0) ** Overall WMI security status: ........................................................................................ OK.
34662 13:02:46 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
34663 13:02:46 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 1.
34664 13:02:46 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
34665 13:02:46 (0) ** 'select * from MSFT_SCMEventLogEvent'
34666 13:02:46 (0) **
34667 13:02:46 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
34668 13:02:46 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
34669 13:02:46 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
34670 13:02:46 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
34671 13:02:46 (0) ** - ROOT/SERVICEMODEL.
34672 13:02:46 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
34673 13:02:46 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
34674 13:02:46 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
34675 13:02:46 (0) ** i.e. 'WMIC.EXE /NODE:"ISWDC2" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
34676 13:02:46 (0) **
34677 13:02:46 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
34678 13:02:46 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
34679 13:02:46 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 32 ERROR(S)!
34680 13:02:46 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34681 13:02:46 (0) ** MOF Registration: ''
34682 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34683 13:02:46 (0) ** MOF Registration: ''
34684 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34685 13:02:46 (0) ** MOF Registration: ''
34686 13:02:46 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34687 13:02:46 (0) ** MOF Registration: ''
34688 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34689 13:02:46 (0) ** MOF Registration: ''
34690 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34691 13:02:46 (0) ** MOF Registration: ''
34692 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34693 13:02:46 (0) ** MOF Registration: ''
34694 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34695 13:02:46 (0) ** MOF Registration: ''
34696 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34697 13:02:46 (0) ** MOF Registration: ''
34698 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34699 13:02:46 (0) ** MOF Registration: ''
34700 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34701 13:02:46 (0) ** MOF Registration: ''
34702 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34703 13:02:46 (0) ** MOF Registration: ''
34704 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34705 13:02:46 (0) ** MOF Registration: ''
34706 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34707 13:02:46 (0) ** MOF Registration: ''
34708 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34709 13:02:46 (0) ** MOF Registration: ''
34710 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34711 13:02:46 (0) ** MOF Registration: ''
34712 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34713 13:02:46 (0) ** MOF Registration: ''
34714 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34715 13:02:46 (0) ** MOF Registration: ''
34716 13:02:46 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34717 13:02:46 (0) ** MOF Registration: ''
34718 13:02:46 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34719 13:02:46 (0) ** MOF Registration: ''
34720 13:02:46 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34721 13:02:46 (0) ** MOF Registration: ''
34722 13:02:46 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34723 13:02:46 (0) ** MOF Registration: ''
34724 13:02:46 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34725 13:02:46 (0) ** MOF Registration: ''
34726 13:02:46 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34727 13:02:46 (0) ** MOF Registration: ''
34728 13:02:46 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34729 13:02:46 (0) ** MOF Registration: ''
34730 13:02:46 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34731 13:02:46 (0) ** MOF Registration: ''
34732 13:02:46 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34733 13:02:46 (0) ** MOF Registration: ''
34734 13:02:46 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34735 13:02:46 (0) ** MOF Registration: ''
34736 13:02:46 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34737 13:02:46 (0) ** MOF Registration: ''
34738 13:02:46 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34739 13:02:46 (0) ** MOF Registration: ''
34740 13:02:46 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34741 13:02:46 (0) ** MOF Registration: ''
34742 13:02:46 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34743 13:02:46 (0) ** MOF Registration: ''
34744 13:02:46 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
34745 13:02:46 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
34746 13:02:46 (0) ** You can refresh the WMI class provider buffer with the following command:
34747 13:02:46 (0) **
34748 13:02:46 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
34749 13:02:46 (0) **
34750 13:02:46 (0) ** WMI MOF representations: ............................................................................................ OK.
34751 13:02:46 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
34752 13:02:46 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
34753 13:02:46 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
34754 13:02:46 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
34755 13:02:46 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34756 13:02:46 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34757 13:02:46 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
34758 13:02:46 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34759 13:02:46 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34760 13:02:46 (0) **
34761 13:02:46 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
34762 13:02:46 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
34763 13:02:46 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
34764 13:02:46 (0) ** WMI static instances retrieved: ..................................................................................... 1822.
34765 13:02:46 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
34766 13:02:46 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
34767 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34768 13:02:46 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
34769 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
34770 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
34771 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
34772 13:02:46 (0) **
34773 13:02:46 (0) ** # of additional Event Log events AFTER WMIDiag execution:
34774 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
34775 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
34776 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
34777 13:02:46 (0) **
34778 13:02:46 (0) ** 32 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
34779 13:02:46 (0) ** => This error is typically a WMI error. This WMI error is due to:
34780 13:02:46 (0) ** - a missing WMI class definition or object.
34781 13:02:46 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
34782 13:02:46 (0) ** You can correct the missing class definitions by:
34783 13:02:46 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
34784 13:02:46 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
34785 13:02:46 (0) ** (This list can be built on a similar and working WMI Windows installation)
34786 13:02:46 (0) ** The following command line must be used:
34787 13:02:46 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
34788 13:02:46 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
34789 13:02:46 (0) ** with WMI by starting the ADAP process.
34790 13:02:46 (0) ** - a WMI repository corruption.
34791 13:02:46 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
34792 13:02:46 (0) ** to validate the WMI repository operations.
34793 13:02:46 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
34794 13:02:46 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
34795 13:02:46 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
34796 13:02:46 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
34797 13:02:46 (0) ** the WMI repository must be reconstructed.
34798 13:02:46 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
34799 13:02:46 (0) ** otherwise some applications may fail after the reconstruction.
34800 13:02:46 (0) ** This can be achieved with the following command:
34801 13:02:46 (0) ** i.e. 'WMIDiag ShowMOFErrors'
34802 13:02:46 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
34803 13:02:46 (0) ** ALL fixes previously mentioned.
34804 13:02:46 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
34805 13:02:46 (0) **
34806 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34807 13:02:46 (0) ** WMI Registry key setup: ............................................................................................. OK.
34808 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34809 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34810 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34811 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34812 13:02:46 (0) **
34813 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34814 13:02:46 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
34815 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34816 13:02:46 (0) **
34817 13:02:46 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\ABCDEF\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_ISWDC2_2014.05.22_12.49.13.LOG' for details.
34818 13:02:46 (0) **
34819 13:02:46 (0) ** WMIDiag v2.1 ended on Donnerstag, 22. Mai 2014 at 13:02 (W:89 E:52 S:1).
There are a lot of error in the report and I don't know, whether they are relevant or how to solve them. To my current knowledge, I need to solve at least some of them so that I can access the local WMI repository again and get replication back working.
But after hours of research I am stuck. Any hints are greatly appreciated.
Regards,
Oliver

I don't know why, but soon after posting this, I found a solution to the problem. The WMI part was solved in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
The relevant portion is this:
Open a CMD prompt in %windir%\system32\wbem
mofcomp dfsrprovs.mof
net stop winmgmt
net start winmgmt
net start iphlpsvc
net stop dfsr
net start dfsr
I don't know why recompiling of all mof did not solve the problem, but the solution above did. Restarting the DCs solved the communication issue. I don't know why the primary DC forgot about the WMI DFS provider or why communication failed. However, it is
working again, it seems.

Email and Chat STOP working

Email and Chat STOP working. NOKIA - try OVI services.
Nokia with Microsoft and Windows Mobile 7 - so; forget and don't hope about quality of our Symbian system and Ovi service
http://www.nokia.com/press/press-releases/showpressrelease?newsid=1488004
http://www.microsoft.com/presspass/press/2011/feb11/02-11partnership.mspx

Hi Abdelhediamir,
Is the mobile data connection (with your provider) up and running? Are you able to browse the web using the phone's browser? If no, this is most likely the reason why the issue is happening. Kindly coordinate with your Network Provider to get the correct Internet/APN settings via SMS. Save it on the phone so it will be configured.

SMS Relay on MacBook Pro - Verification Code won't pop up.

Howdy!
Got everything updated to 8.1 and to Yosemite. Have a 4s, MacBook Pro and an iPad mini. Working on setting up the SMS relay for my wife. (These are all her devices). iPad fired up right away, no issues. Verification code came up, and voila! messages on both iPhone and iPad. Well and good. Then comes the MacBook. Not so lucky there. I've been working on it for about 2 hours now, and I'm coming to the community here to assist.
This is what i've done so far, after reading other community questions and following instructions:
1) Verified that iCloud address is the same on all devices.
2) Switched "send new messages from:" to the iCloud email. No Dice - Switched back to Phone number.
3) Signed out of iCloud on all devices, sign back in, and wait 15 minutes. Also No Dice. (Again, iPad fired up right away).
4) Turned Message forwarding on and off on iPhone about 6 times. Still No dice.
5) Verified that all are on the same Wifi network.
On trying all of these things, I still can't get the verification code to pop up on the MacBook. I'd appreciate any assistance/ideas/suggestions that y'all could offer.
Thanks in advance!

Howdy!
Got everything updated to 8.1 and to Yosemite. Have a 4s, MacBook Pro and an iPad mini. Working on setting up the SMS relay for my wife. (These are all her devices). iPad fired up right away, no issues. Verification code came up, and voila! messages on both iPhone and iPad. Well and good. Then comes the MacBook. Not so lucky there. I've been working on it for about 2 hours now, and I'm coming to the community here to assist.
This is what i've done so far, after reading other community questions and following instructions:
1) Verified that iCloud address is the same on all devices.
2) Switched "send new messages from:" to the iCloud email. No Dice - Switched back to Phone number.
3) Signed out of iCloud on all devices, sign back in, and wait 15 minutes. Also No Dice. (Again, iPad fired up right away).
4) Turned Message forwarding on and off on iPhone about 6 times. Still No dice.
5) Verified that all are on the same Wifi network.
On trying all of these things, I still can't get the verification code to pop up on the MacBook. I'd appreciate any assistance/ideas/suggestions that y'all could offer.
Thanks in advance!

SMS Relay stopped working

Similar Messages

Maybe you are looking for