SMS Search not working after 8.0.2 update

I updated from iOS 7 today.
Now i can't seem to search my previous sms. It doesn't show all the other previous sms except for today's.
anybody else experiencing the same issue?

Yeap. i still went to check my old messages and then searched for the words.
I have a lot of past SMS-es. but only the ones that were from today came up in the search.

Similar Messages

Illustrator tools dropdown is not working after the recent software update

My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

Same problem here. I have a Mac with a recent Yosemite update.

Home button not working after 5.0.1 update

Ok now the home button not working after 5.0.1 update. Anyone have any ideas? How do I roll backfrom this update?

This happened to me as well. AT&T had me reset my network settings and this fixed the problem. Here is how...
Settings > General > Reset > Reset Network Settings
"For now" the problem is fixed for me.

Touch ID not working after IOS 7.1 update

Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

I'm like, Touch ID almost dead, we're going apple fixex this.
Seems it only is affecting the white model

My iPad orientation is not working after the IOS 8 update. Please fix this bug!

my iPad air orientation is not working after the IOS8 update. Can you fix this bug? Thx

Did you try a reset?
Restart / Reset
http://support.apple.com/kb/HT1430

Drobo not working after 10.5.8 update

My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
Oh, and Data redundancy on a raid is not a backup of course.
Vincent
Message was edited by: v1ncen7

External monitor Syncmaster 2494SW not working after 10.6.7 update

External monitor Samsung Syncmaster 2494 SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
Safemode boot, SMC reset, PRAM reset did not help.
Exactly the same setup works perfectly under 10.6.6.

HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
WHAT TO DO TO FIX:
Go to => System Preferences => Energy Saver => change graphic settings to Higher Performace.
Cheers!!

IPod touch not working after 5.0.1iOS update

It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

Have you tried the sandard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Retore from backup
- Restore to factory defaults/new iPod.

Trackpad not working after 10.8.4 update

Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

Apple store genius bar appointment is the best option for a positive resolution.
Ciao.

Mail search not working after clean install of 10.5.4 on new 20" iMac

Apple Mail search is not working. Search on "subject line" works, but search on "entire message" does not. For example, searching with "parking" yields NO results, and there are many messages with the word "parking" in their body in the mailboxes. It happens with both "In Box" and "All Mailboxes" checked.
What's going on?
I did a clean install of Mac OS X on a 20" iMac using the Install disk shipped with the machine. Then I ran Software Update. Still, the problem happens, on a clean baseline system.
Argh.

I've had this problem since Tiger. Various solutions have been posted, but none have worked for me. It really cripples Mail--I've used emails as my personal database for years, kind of a history log, which worked great in Eudora but Eudora isn't being supported anymore.
After updating to X.5.5, I can search "entire message" for "All Mailboxes" and find everything including emails in the mailbox I was viewing (often finds 60,000 occurences, but doesn't take very long--it's just incredibly tedious to find the one I want from such an enormous set of results). I can also find everything using Spotlight, outside of Mail. But if I am looking at any mailbox, like Inbox, search "entire message" never finds anything at all. Searching for subjects etc works fine.

SMS search not working

Has anyone experienced issues with their SMS search after the upgrade to iOS 6.1.3. I can't seem to find SMSes anymore via the seach at the top of the SMS app. Any help would be appreciated.
Thank you in advance!

Restoring is time consuming
Yes, an agonizing 15 minutes of your life.
many other posts have said that it did not solve the issue.
What posts?
Many have commented that it is since the update to 6.1.3.
Define "many" and how that relates to the >50 million who updated without problems? How "many" of those with the problem have phones that were previously jailbroken?
This all boils down to whether you actually want to fix your problem. In the time you took to post here, you could have restored several times.
"My car has a flat tire and I've tried everything I can think of except switch to the spare...."

HT4528 sms search not working

When I go into my Text Messages, the search bar will not search amongst my messages. How do I fix this?
For example: I sent text messages with Michael 1 week ago. The texts are still in my messages if I scroll all the way down to last week. However, when I type Michael in the search box in the Messages App, nothing appears.
This just started happening recently. I have used this feature ever since I got the iphone.
PLEASE HELP!

Yes, I recently had this problem with my iPhone 4. When I went to search for text message/imessage contacts inside the "messages" app, I could not find the contacts even though they were never deleted and available in the list.
To fix this problem:
1) Change you iphone language to: Korean and then back to English.
a) Settings -> General -> International -> Language -> 한국의 (Korean)
2) Make sure you take screen shots of the pages/process so you know how to go back and change the language settings back to English when the iPhone is set to Korean.
3) The message search will work again after you do this.
Best,
<Edited by Host>

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

Canon Lide 80 - not working after 10.5.8 update

Hi,
Wondered if anyone has a workaround for getting a Canon Lide 80 scanner to scan using Photoshop Elements 6, it worked in OS X v10.5.7 previously as I copied the latest ScanGear CS 7.2X plugin into the Photoshop Elements plug-in folder then ran Elements through Rosetta and it scanned with no problems however this now does not work.
The plug-in is still selectable when using PSE6 but I get the following message "The necessary file could be missing or damaged, or the settings are incorrect. Reinstall the scanner driver. Scanner driver will be closed"
I have made sure I have the latest plug-in but to no avail. Any assistance would be greatly appreciated.
Cheers
Andrew

Can't speak specifically to Photoshop Elements, but my LiDE 80 works fine on 10.5.8 using both Canon's CanoScan application as well as VueScan, both of which use the same plug-in architecture as Photoshop.
This is on a MacBook (Santa Rosa) after updating to Leopard 10.5.8 (it was previously running 10.5.4, where the scanner also worked).
I am using the latest ScanGear driver and CanoScan Toolbox installs from Canon's US support website, where the
filenames are LiDE80_7252MXEN.dmg and CSTb4130MXE.dmg respectively (the Canon site shows an update date of July '09, but in actuality none of the files have been updated since 2005).
I didn't do anything special -- the scanner continued working normally after the system update.
What I'd try is remove the driver (just to be safe, download & use Canon's driver removal utility from the same download page), search & nuke any files called Scangear on the machine (I'd also remove CanoScan if you have it installed), then reinstall from scratch.

IPad wi-fi not working after Lion and cloud updating

Updated to LION OS 10.7.2 and updated iTunes today along with updating to the "cloud."
Updated iPad to 5.0.1.
Wi-fi is not working now.
On my desktop iMac I went into system preferences and went to "sharing" and have "internet sharing" checked. This is how it was working before.
I am trying to finish my iPad update. When I get to "wi-fi networks" it shows my iMac G5 but just keeps searching after I try to select it. It will not connect to my wi-fi. How do I get it to work????

I am using an intel i3. When I said above about my G5...that was just what my computer was named. I have a new iMac but when information was transferred it must have kept the name of it as my G5.

SMS Search not working after 8.0.2 update

Similar Messages

Maybe you are looking for