SMS service in java

Hi frnds... can anyone tell me the way to send SMS from the java application.Anyone tell me the technology used in this concept.... Its urgent... Thanks in advance.....

It depends on wich is your sms provider. You normally need to send the SMS against a gateway, wich will have a propietary protocol. An intermediate vendor can provide you an http access based on xml or even web services if you are lucky :S Try contact providers in your country

Similar Messages

How to send SMS ( Short Message Service ) from java code

Hi
How to send SMS ( Short Message Service ) from java code.
Thanks
Gaurav

Do you need to receive SMS? If you need to receive SMS, you will need to host your own GSM device or modem so that people can send you SMS.
If not, you can just use internet SMS gateways like clickatell as mentioned above will do the work, and post to them by HTTP, XML or email. The cost is about 6-8 cents per SMS. There are cheaper services, but not always reliable. If you need to host your own GSM device, you can use software like http://www.kannel.org (GPL Open Source) or http://www.visualgsm.com. Alternatively, you may obtain a shortcode from your Telco - but these come with monthly subscription of maybe one or two hundreds.
Regards,
Joshua
<SMS Gateway>@Expert

Help Me! How to send sms from a java program with a pda connected to system

help me ,
I am new in JavaME. I have to send sms from a java program, A PDA is connect to the system. Can some one help me to make that program which interact with PDA connected to system and send sms to any mobile or pda phones.

user12873853 wrote:
I believe JavaMail API will help in sending the mails and SMS through SMTP server. Sounds more like false hope than belief to me. The only way that would work is if you have an SMS gateway that allows communication through SMTP. Doubtlessly some exist (searching for 'JavaMail sms' through google certainly seems to indicate this), but if you have to ask you don't have one.
And that exactly where you are stuck: to send SMS messages you need an SMS gateway. That will be the first thing you have to shop for, until then there is no reason to think about code, protocols or implementations. It can be as simple as hooking up a mobile phone, but then you cannot send bulk messages of course. Most likely you'll need to shop around for a partner that has an SMS blasting service you can use.

How to access .asmx Web Service using JAVA? Newbie

Hello Experts,
Currently, I have a project where in I have to access a ,NET web service. It is made of C#. I just want to ask how will I start the accessing process? I made this simple equation on how my project is.
Java Project + C#.Net Web Service = Integration
1. Do i need to create a Web Service too for the Java Project? If yes, What are the necessary tools needed for the creation of this Java Web Service?
2. The .NET Web Service is available online. (It is made by other people).
3. Based on the equation, what is the equivalent technology for the + sign?
4. Can you site a concrete example for accessing a web service?
5. I'm new here. Totally I have no idea where to start.
6. Thank you experts.
Edited by: Benedict.Aluan on 05 30, 08 1:38 PM
Edited by: Benedict.Aluan on 05 30, 08 1:39 PM

Hello
Thanks a lot for your help ...
I am developing simple J2EE based web service client using IBM WSAD 5.1. I have used the following code to call .asmx web service in Java
String url = "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl";
     String namespace = "http://tempuri.org/";
     name = request.getParameter("txtName");
     try
          System.out.println("In Internet Service");
          ServiceFactory factory = ServiceFactory.newInstance();
          Service serv = factory.createService(new URL(url),new QName(namespace,"TempConvert"));
          System.out.println("Got Service......");
          Call obj = (Call)serv.createCall();
          System.out.println("Got Call......");
          obj.setProperty(Call.ENCODINGSTYLE_URI_PROPERTY,"");
          obj.setProperty(Call.OPERATION_STYLE_PROPERTY,"wrapped");
          obj.setTargetEndpointAddress(url);
          obj.setPortTypeName(new QName(namespace,"TempConvertSoap"));
          obj.setOperationName(new QName(namespace,"FahrenheitToCelsius"));
          obj.addParameter("param1",XMLType.XSD_STRING,String.class,ParameterMode.IN);
          obj.setReturnType(XMLType.XSD_STRING);
          System.out.println("Parameters Set.....");
          Object[] params = new Object[]{name};
          k = (String)obj.invoke(params);
          System.out.println("Result: "+k);
     catch(Exception e)
        System.out.println("Exception is : "+e);
    }But this code is throwing exception that
Invalid Address "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl"I have also tried this URL with Java Proxy. But it showing the same error.
Plz can u tell me how to access .asmx web service ?
Waiting 4 reply.

How to consume the Abap web service in Java web-dynpro

Hi Everyone,
I want to consume ABAP web service in java web dynpro.
so when i tried to create model in java web-dynpro, it gave me an error message saying "Invalid WSDL or WSDL not found".
i think this error message is because, to access the WSDL of abap web-service, we need username and password, but the dialog box in java web-dynpro is not programmed to take username and password from us and send it to the server to get the WSDL.
i came to this conclusion because i was able to successfully test my abap web-service in java portal. the java portal asked me the username and password to open the WSDL.
So, please help me to consume the abap web service in java web-dynpro.
Thanks in advance
Regards
Vikas

Hi Vikas ,
while creating a model in web-dynpro try to use the "import web service model" option and if you are using local server choose the local server option so that you can get the available web services which are in server, select one among them and continue you process.I think this is the some what easy way .
If you want use the URL for wsdl better to once test the available service in server and copy that WSDL URL and paste over WSDL textbox.
I think this is pretty help ful to you
Best Regards
Srikatnh

No SMS - Service since Software Update Z10

Hi, since my software update to 10.1.0.2312 I cant use SMS Service! I dont get any SMS and I cant send any SMS. Also I cant delete a SMS....
It's my first BackBerry and I'm VERRY angry!

Are you T-Mobile USA? If so, their current OS version is 10.1.0.2006, but might be different in other countries.

Parse errors while creating a Web service from Java class!

Can anybody tell me please, is it possible to create a Web Service from java class where the input from user is required ?
I have the following program, which is successfully compiled, but when I'm trying to make a web service in JDeveloper, the following error occurs:
"Validation failed.
The implementation class primePackage.isPrime ofport type MyWebService contains parse errors."
import java.io.*;
import java.util.*;
class isPrime
public static void main (String args[])
Scanner reader = new Scanner(System.in);
int n;
System.out.println ("Enter a number you want to know is it prime or not");
n=reader.nextInt();
if (isPrime(n))
System.out.println ("True");
else
System.out.println ("False");
static boolean isPrime (int n)
int i=2;
while (i<=n-1)
if (n%i==0)
return false;
i++;
return true;
}

Hi,
Can anybody tell me please, is it possible to create
a Web Service from java class where the input from
user is required ?Yes, the parameters of your method will be mapped in WSDL.
But i've some considerations about your code.
I suggest you change the name of isPrime do Prime, its a good code convention to put the name of class starting with Upper case. and isn't good the name of class equals to name of method.
I suggest you to change the "static boolean isPrime (int n)" to "public boolean isPrime(int n)" to publish a method as a WebService method it's must be public and not static. After this change try to generate your Web Service.
Regards.

Calling a Web Service from Java

Our java guru (who is out sick....AHHHH) created all the calls that are needed to access the web service that he has running. For example the call getLongList(String user, String password) will return a list of all outstanding transactions. He made a jar file that has service has class files for PortType, Service, Service Locator and Soap Binding stub.
How do I call this web service from java? Do I have to import it into my classpath? or just call these parameters from within my java code?

never mind...i got it

Calling a Web Service from Java Webdynpro

Hi,
Can any one give me step by setp details on how to call a Web Service from Java Webdynpro ?
I tried creating a model using Import Web Service Model but when I completed creating the model, I got some errors as shown below.
Error The method setRouteGeometryLineArray(double[][]) in the type Trip is not applicable for the arguments (double[]) ComplexType_Trip.java WS_INVOKE/gen_wdp/packages/com/cintas/test/model/p1 line 249
thanks
SBK

Hi SBK,
I assume you may already have read the [help guide|http://help.sap.com/saphelp_nw70/helpdata/EN/81/12703e5da3e946e10000000a114084/content.htm] This gives a pretty good idea of how to do it (step by step).
Is there a typo in the error you pasted?
Error The method setRouteGeometryLineArray(double][) in the type Trip is not applicable for the arguments (double[]) ComplexType_Trip.java WS_INVOKE/gen_wdp/packages/com/cintas/test/model/p1 line 249
The square brackets [] after double in the method call appear to be reversed. Is that also in the code? or just a mistake here?
Hope this points you in the right direction.
BRgds,
Simon

Web Service From Java class, serialization problem

Hi,
I want to create Web Service from Java class, I made java project, generated web service from it, create web service archive project and deployed it to WAS 6.40.
My class have 2 methods,
public int add(int a, int b);
public MyResponse doSomthing(MyRequest req);
I can succesfully call add method from Web Service Navigator, it works fine but when I call doSomthing methods I get the following error:
<b>
Deserializing fails. Nested message: XML Deserialization Error. Result class [com.mycomp.sap_tech.ws.MyRequest] does not have property [Amount] of type [java.lang.String]. It is required to load XML..
</b>
Any ideas how to resolve it?
P.S. MyRequest class is exposed throw VI, has default constractor and public getters and setters for all properties. It implements Serializable as well. Any guesses?
Thanks in advance,
Victor.

Hi Bhavik, thanks for response.
as I already mentioned it implements Serializable, so it is not the problem.
Thanks Avi but it didn't helps iether
Victor

401 Error on Consuming SharePoint Versions Web Service by java client running on Unix Machine

In my organiszation I have sharepoint site of our project. I have a java client to consume Versions Web Service offered by SharePoint. The response received from web service without any issue when triggered from a client running on windows machine on
intranet.
When same java client ran from UNIX server on same intranet, it gives 401 error. Is there some different approach required for authentication while connecting from unix machine?
Thanks in advance.

Hello,
Are you passing credential in code? If not then try to add using networkcredential.
If you are passing then make sure that current user is having access on SP site and your javaserver is setup for NTLM security. Here is few links for same issue which could help you troubleshoot the issue
http://stackoverflow.com/questions/8884152/ntlm-fails-when-consuming-sharepoint-web-service-from-java
http://www.pentalogic.net/sharepoint-products/reminder/reminder-manual?p=troubleshooting%2F401errors%2F401errors.htm
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

SQL Reporting Services with Java EE

I have developed a Java application for calling the SQL Reports. A couple of reports are made in the server. This SQL Reporting server is deployed and the client is made in the java using Werb services. Whenever a search is done from the Java application, reports are displayed on the JSP page using the web service methods. But the problem is the entire report is displayed. Is there any way to display the report based on the particular item search. Suppose, if search is made on "Australia" in the coulumn Country, the report should contain only Australian related data. Currently the search is based on the report name itself.

bobz wrote:
jschell wrote:
bobz wrote:
Is there any book on SQL Reporting services with Java
[http://www.javaworld.com/javaworld/jw-01-2005/jw-0110-sqlrs.html]
This looks hopeful.I have already developed a java EE for calling reports with the help of ---"MSDN Virtual Lab: Implementing SQL Server Reporting Services with a Java Enterprise Edition (EE) Application (ID:1032315323)". Now I need to find out the parametrized reports(passing parameters to the report calls and more customization using java). In .NET, reportviewer controller is available for this purpose. I want to achieve the same type of thing using java.The protocol of controlling the Report Server is a feature of the Report Server.
To control it you learn the protocol. To use it you program it in java.
The first has nothing to do with java. The second obviously does.

How to consume an ABAP Enterprise Service in JAVA

Dear colleagues:
I'm kind of confused and need your help.
I have already created a Enterpricse Service (for test) in SE80 and configured it through SOAMANAGER.
Question1:
Here is the WSDL URL I got from SOAMANAGER:
http://ldcihri.wdf.sap.corp:50000/sap/bc/srt/wsdl/flv_10002A111AD1/srvc_url/sap/bc/srt/rfc/sap/z_ws2/000/z_ws2/z_binding?sap-client=000
And here is the WSDL URL I got from SE80:
http://ldcihri.wdf.sap.corp:50000/sap/bc/srt/wsdl/flv_10002P111AD1/sdef_url/Z_WS2?sap-client=000：
The XML file I got from the two URL are different, the former is bigger.
Which URL should I use? thanks.
Question2:
I have tested the 2 WSDL URL through Online SOAP Client - WSDLBrowser.com
But both URL failed the test.
I test the same URL in SOAMANAGER-TOOLS-WSDL Analyzer.
Both URL were OK.
Any idea? Is it because the authorization? I need to input user name and password for WSDL Analyzer.
Question3:
I'd like to consume the web service in JAVA.
Is it possible to consume the service in Eclipse IDE?
(I have tried several times by creating Web Service Client using the WSDL but it always say that the WSDL is invalid.
Or I have to consume the Enterprise Service in NetWeaver Develop Studio?

In addition.
I have already activate the web service.

How to create web services in java?

Hi,
I am a newbie to java webservices. Can anybody tell me how to create web services in java?
Any tutorial link or step by step doc would be useful.
Appreciate your help in this regard.
Thanks in advance.
naymo01.

Creating web services in Java appears to depend highly upon the server you intend to use.
Here's a tutorial: http://java.sun.com/webservices/docs/1.6/tutorial/doc/index.html

Creating Web Services using Java Implementation

Hi,
This is quite a general question on how to create a Web Service using Java Implementation that needs to conform to a client XML schema.
Here are my Version specs,
I am using Jdeveloper 10.1.3.4.0 and deploying onto OAS 10.1.3.
I will be creating a J2ee 1.4 (JAX-RPC) Web Service using Document/Wrapped style.
I have been provided an XML schema from the client which is quite complex.
Using a top-down approach, I can create my WSDL file and import the XML Schema for my type definitions.
The Web service aim is to accept some parameters and return some data from the Oracle Database. The
XML response from the web service must conform to the element, attribute definitions in the provided XML schema.
From a Java implementation approach, what is the best (simplest or quickest) way to retrieve data from the Oracle
tables and map each fields/column to the required XML output (defined in the XML schema).
I'm not too concerned with using Java to retrieve data from the Database, more with how I can map the data returned
to the required output. Can this mapping task be controlled within the Java program?
Thanks in advance.

Hi,
This is quite a general question on how to create a Web Service using Java Implementation that needs to conform to a client XML schema.
Here are my Version specs,
I am using Jdeveloper 10.1.3.4.0 and deploying onto OAS 10.1.3.
I will be creating a J2ee 1.4 (JAX-RPC) Web Service using Document/Wrapped style.
I have been provided an XML schema from the client which is quite complex.
Using a top-down approach, I can create my WSDL file and import the XML Schema for my type definitions.
The Web service aim is to accept some parameters and return some data from the Oracle Database. The
XML response from the web service must conform to the element, attribute definitions in the provided XML schema.
From a Java implementation approach, what is the best (simplest or quickest) way to retrieve data from the Oracle
tables and map each fields/column to the required XML output (defined in the XML schema).
I'm not too concerned with using Java to retrieve data from the Database, more with how I can map the data returned
to the required output. Can this mapping task be controlled within the Java program?
Thanks in advance.

SMS service in java

Similar Messages

Maybe you are looking for