SMS setting won't save after update

After updating my N80, i tried to send a text message, and was greeted by a message saying i needed to entewr the message centre number. I had a look around and manage to track down the official three network message centre number, and the message went through fine
however, i am prompted with the same problem everytime i try to send a message. Going to settings/message centre brings up the following notice 'text message service disabled. No message centre numbers saved on sim card'
By not allowing me to enter into the message centre number menu, i cannot therefore add another, so i'm stuck.
Tried all the usual things, taking the sim out and re inserting it,updating the firmware again, but to no avail.
customer services dont have a clue
any ideas?
thanks

Backup all your personal stuff onto memory card (faster than pc suite).
Reset device by entering *#7370# then code (default 12345).
If that works, you can then get other settings from the Setting Wizard at http://europe.nokia.com/A4164073?model=N80

Similar Messages

  • Setting won't save after closing firefox

    Hi,
    When I open Firefox it search my addons for compatibility with the version of my firefox, after then it open up with all my closed tabs and a notification about updating one of my addon.
    I tried to change my setting so it won't open all closed tabs when starting but whenever I close firefox it reset my settings and the next time start the same way.
    I tried also to reinstall firefox but it did nothing.
    How do I fix it?
    Asaf.

    It is possible that there is a problem with the file(s) that store the extensions registry or with the compatibility.ini file.
    Delete the extensions.* files (e.g. extensions.json, extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end of the Search bar to check if there is a compatibility update available.
    If this hasn't helped then also delete possible addons.json and addons.sqlite files.
    You can also check for problems with preferences.
    Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences

  • Ipod classic won't mount after updating to itunes 11.0.2

    ipod classic won't mount after updating to itunes 11.0.2.
    I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
    Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
    I've restarted the ipods 10+ times each.
    All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
    One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
    Machine is a Mac Pro running 10.6.8.

    Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
    Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
    I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

  • ITunes won't open after update; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5

    iTunes won't open after update - help, please; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5.

    i had a problem similar to yours and better yet, i have the fix for it. i downloaded maverick 4 months ago and was without itunes ever since. all itunes icon did was bounce. itunes would never open and whats more, is when i would try to update it, i would get a "thank you for downloading itunes!" page , but the download would never work. so i scoured the net for solves. nothing that worked. <4 months later> then last night i took a new approach. i decided even though maverick would not allow me to uninstall itunes, i would find a way to uninstall itunes. then i would reinstall back to 11.1.5 i was successful and heres what i did.
    step one-
    Back up your iTunes Library.itl file, found under ~/Music/iTunes
    (even tho i didnt, i only had 3 artists in there at the time. and they didnt get erased but i advise you back up just in case.)
    step two-
    download itunes 10.7 from apple. i used this link Download it from Apple here
    (i pulled the link from Aarons website (awesometast.com). you download 10.7 however you want but i used the link above and have had no issues).
    although im not sure you need to do this step ( you may be able to download 11.1.5 itunes without 10.7, i did because i was following intructions from http://awesometoast.com/downgrading-to-itunes-10-7-from-itunes-11-on-osx/
    step 3-
    open Terminal
    step 4-
    enter in these 3 commands hitting return after each line. 1st line nothing seems to happen, 2nd line nothing seems to happen and 3rd line gives you a warning and requires password to continue. when i did it, my password didnt appear as i entered it and i hit return without looking, so i entered it in again, although im not sure i had to the 2nd time.
    killall iTunes
    killall "iTunes Helper"
    sudo rm -rf /Applications/iTunes.app/
    step 5-
    drag off and dump the itunes icon (which now has the ? shadow in it) off your dock.
    step 6-
    install 10.7 itunes you downloaded earlier. (not sure if this part is neccesary. you may be able to just download 11.1.5 but i downloaded 10.7 because i was following Aarons steps.) itunes now works.
    step 7-
    go to apple and update to 11.1.5 itunes. install it. open it and you have itunes 11.1.5 in perfect working order. assuming you have a decent internet speed for the downloads, the whole process takes very little time.
    with those steps above, you can solve itunes just bouncing and not launching issues and also the "thank you for downloading" and nothing downloads issue. enjoy. also i would like to give a shout out to http://awesometoast.com and thank Aaron for the knowledge that enabled me to get itunes back into my life.

  • Both iPod and iPad won't connect after update.

    Both iPod and iPad won't connect after update.  iTunes says "can't allocate a resource"

    I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
    Follow these steps to reset the Lockdown folder:
    Disconnect all iOS devices from your computer and quit iTunes.
    From the Finder, choose Go > Go to folder.
    Type the following and then press Return:
    /var/db/lockdown.
    The Finder window should display one or more files with long alphanumeric file names.
    In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
    Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
    Reconnect your iOS device and open iTunes
    My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

  • My iphone won`t activate after updating to ios 5.1 plz help

    my iphone 3gs won`t activate after updating to ios 5.1 plz help

    I got mine sorted. Turns out because i got it unlocked the first time getting updates via itunes causes it to restart again. Had to get it unlocked at managed to get eveything back after restoring it from itunes. Very happy cause the guy in the apple shop told me i had to call apple and pay 35euro just to talk to them! I manged to get it unlocked for only 20 and its just like it was.
    hope you're able to get yours sorted

  • Ipad 3 won't charge after updating to ios 6. even with apple charger

    ipad 3 won't charge after updating to IOS6. even with apple charger. just say "not charging" next to the battery symbol

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • My apps won't load after updating to iOS4.3.2. What to do?

    My apps won't load after updating to iOS4.3.2. What to do?

    Yes, I tried that (thanks for the suggestion, though!). In my music app, when I click on certain songs, the screen moves to try to start the song, but then it bounces back to the menu screen without playing the song. On many albums, when I click on the first song, a song about halfway through the album will start to play rather than that first song. My other apps seems to be fixed, but not the music function.

  • Mac won't boot after updating to OSX 10.6.4

    I am on my 3rd Mac that won't boot after updating to OSX 10.6.4. One MacBook Pro and two iMacs. I fixed one but the last two are getting the better of me. HD is not fried. Have tried every keyboard shortcut on startup, Disk Warrior via. Target Disk, repairing permissions in single user mode. The machines will not boot off of a CD or DVD and it will not boot up in safe mode. Something in the startup files is preventing startup. I am suspecting Sophos antivirus. I tried to uninstall it and trash it but I think it's still blocking something. Any help would be appreciated.

    Got it! Not sure if removing Sophos had anything to do with it but here's what I did.
    1) boot dead machine in Target Disk Mode (iMac)
    2) boot good machine off Snow Leopard disk (MacBook)
    3) install OS to dead machine- I found this next part very curious. When the install was complete the MacBook restarted as the iMac.
    4) ran software updates
    5) shut down MacBook then shut down iMac
    6) rebooted iMac- all was good
    I actually did this twice because a co-worker had the exact same problem on her MacBook Pro. Got both fixed today.
    Thanks everyone for your help!

  • Mac won't restart after updating to OS X Mountain Lion

    Mac won't restart after updating to OS X Mountain Lion. Please help?

    Like what happens?  Is it just spinning?
    If you've waited sufficiently long (say 10 minutes) you could just hit the power button which will do the trick.  A little more gentle would be to open a terminal window (if you can) and type 'sudo reboot' (without the quotes) and enter your password when it asks.  That will do it too.

  • Firefox won't start after update - nothing in support pages helps

    windows 7 - firefox won't start after update - no support pages are relevant

    -> [[Firefox will not start]]
    Check and tell if its working.

  • HT204347 My MacBook Pro won't restart  after update to lion

    My Mac book pro won't restart after updating to lion ! Said problem a cured at startup press any key ! No Goodrich

    Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

  • How come my apps won't open after updating to ios5

    how come my apps won't open after updating to ios5?

    Thanks for the feedback.  This is a custom enterprise application.   So there is not an update yet.   It will take our developer a little time to get it IOS 5 compatiable.  So unless I can change the IOS we can't use application until we get upgrade of the custom app.

  • Iphone 4s won't charge after updated to ios 6.1.3

    iphone 4s won't charge after updated to ios 6.1.3
    Different adapters and usbs have been tried, and now power has been drained.
    Apple support says there is nothing they can do about it, and they surggested me to pay 199 for a new iphone.
    Is there anybody having the same problem?

    I'm having the same issue with iphone 4.
    Seems to work ok after i connect it to itunes but then the next day i have to do it again.

  • TS1717 my iphone 4s won't activate after updating to ios 7?

    my iphone 4s won't activate after updating to ios 7?

    Same here. I heard of some way to bypass the activation but it was patched .

Maybe you are looking for

  • Modification of Global channels In NIMax while Labview Program running, not updating in Labview

    Hello,      Okay, here is my issue.  I have a program that reads data from a device using global channels in MAX. Step 1:  I open MAX with the systemExecute.vi with the parameters to wait till program finishes. Step 2:  I Modify a channel in Max, for

  • EMAIL Notifications are not displayed in UWL

    HI One & All, I configured UWL and tested for Leave request Process. Workflow is working fine. Manager is approved the leave. But when manager approved leave a Notification should come in to UWL. that notification is cumming in SAP INBOX but it is no

  • Reprocess BPM's

    Hi everyone: I wanna reprocess workflows in XI(BPM) when they have failed. I wanna do it from the step which failed. I know there is a transaction swf_xi_swpr to do it. Is this transaction usefull? Can somebody explain me how does it work? and how to

  • Migrating from Windows to the ACS appliance

    I'm in the process of migrating ACS from Windows to an appliance. I did a recovery and I chose to restore the DBs and the system config. However, I'm getting emails from the appliance with the name of the old windows machine where ACS was running. I

  • Mac Pro Gaming Upgrade

    Hey guys, I just got a new mac pro and i was just wondering what is the best way to upgrade my mac to get the absolute best graphics on my games, max out ram? best graphics card or best processor? Thanks, Andy