SMS_SITE_COMPONENT_MANAGER issue

Hi,
Whenever am rebooting the secondary server SMS_SITE_COMPONENT_MANAGER is not getting started automatically.Getting below error in sitecomp.log.Please help.
Could not resolve path to installation map file
\\server\install.map to a local disk: The operation completed successfully.
Regards,
Prajith

thanks Jason
when i checked the path was correct,
i changes the service start from automatic to delayed start,
the issue is resolved

Similar Messages

  • Issue getting WDS to Install for PXE in SCCM 2012 SP1 Primary Site

    Hi All
    I'm trying to get PXE boot working from our SCCM 2012 box but it never actually gets to the point of installing WDS when I check the box for PXE booting. I don't have  SMSPXE.log since it never gets to that point and the distmgr.log  never reaches
    that point either. I've tried
    uncheck pxe boot option - restart - re-check
    uncheck pxe-boot - restart - install wds - leave it unconfigured - reboot - check pxe boot
    uncheck pxe-boot - uninstall the vcredist 2008 packages - rebooting - install vcredist - check pxe boot option
    the above with installing wds unconfigured
    Below is the relevant portions of the distmgr.log file after I enable the pxe boot option no matter what manner of software is installed. We are running it on a VM in a Hyper-V 2012 enviornment in Windows 2008 SP2 x64. This issue is similar to this link
    WDS PXE Secondary Site Issues but mine is on the Primary Site.
    ConfigureDP SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:09 AM 4008 (0x0FA8)
    DP registry settings have been successfully updated on TUSC2012.TALISKERUTAH.LOCAL SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.083 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.084 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    ConfigurePXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    CcmInstallPXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Running: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Waiting for the completion of: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Run completed for: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    GetFileAttributesW failed for SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindWimgapiDll failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Running: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Waiting for the completion of: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4668 (0x123C)
    Created policy provider trigger for ID 16777217 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4656 (0x1230)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:34 AM 4668 (0x123C)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:39 AM 4668 (0x123C)

    HI again, sorry for the late reply.
    By saying that WDS don't get configured, I mean that when i enabled the PXE functionality, the WDS role got installed but the folder remote install wasn't created.
    I ahve now actually gone back to an earlier snapshot from before I started play with the PXE settings of the VM and now nothing happens when activating PXE on the distribution point, but not even the smspxe.log is created.
    The Account used is a local admin and the distribution point is located on the primary site server.
    EDIT: in the events log, it states the following:SMS_SITE_COMPONENT_MANAGER on computer XXX.XXXX.XXX reported: SIte comoponent Manger failed to to install on this site system.
    On error (source: MsiInstaller) below:
    Product Application Web Service -- Internal Error 25001. 80070490
    I havent mentioned it earlier, but the Server OS is Server 2012.
    I hope this might help you help me :)
     

  • Post SCCM Installation Issues

    After installing SCCM 2012 in our lab, I am finding four critical errors in the Monitoring | System Status | Component Status
    1.  SMS_MP_CONTROL_MANAGER - Availability is unknown and is marked red
    2.  SMS_DISTRIBUTION_MANAGER - Availability is online but is marked red
    3.  SMS_SITE_COMPONENT_MANAGER - Component Not Installed by Site Component Manager - Availability is online but marked red
    4.  SMS_NOTIFICATION_SERVER - Availability is unknown and is marked red.
    Anyone can offer how to resolve the critical issues ???  Many thanks in advance.

    Check here for server prerequisites
    http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs
    or here for Server 2012 prereqs
    http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_Win2k12SiteSystemPrereqs
    Moo.

  • SCCM 2012 R2 DP - Reserve Disk Space issue

    Hi Team,
    Issue with SCCM 2012 DP. Reserve Disk space issue.
    During DP installation I have given 100000 MB as Reserve disk space, now my DP Share drive reached below 97 GB of free space, now I’m unable to distribute packages to the DP.
    Below is the error Message in Smsdpprov.log
    Failed to find space for 105874160 bytes.
    Solution tried:
    Tried changing the reserve disk space value in Registry (HKLM- Software – Microsoft – SMS- DP- ReservedDiskSpace),
    But the value is getting auto reset to old value after a restart.
    Is there any way where I could change the Reserve disk space without reinstalling the DP Role?

    Hi,
    >>Is there any way where I could change the Reserve disk space without reinstalling the DP Role?
    We need to edit the reserved free space in SQL database. But this is not supported by Microsoft.
    Steps:
    1) Run SQL query:
    select SCR.ID, SCR.Name,SC.NalPath, SCR.Value3 from sc_sysresuse_property SCR join sc_sysresuse SC on SCR.SysResUseID = SC.ID where SCR.name = 'MinFreeSpace' and SC.NALPath like '%<DP_Name>%' and SC.RoleTypeID = 3
    Note: you need to replace the <DP_Name> with your actual remote DP server name.
    2) Use the returned ID in step 1). Run the below query to update the 'MinFreeSpace' value.
    update sc_sysresuse_property set value3 = 'set desired value in MB' where name = 'MinFreeSpace' and ID = 'ID retained in previous select query'
    Example:
    update sc_sysresuse_property set value3 =20480  where name = 'MinFreeSpace' and ID = 75340198761234567
    3) In the next package content update cycle, the reserveddiskspace registry value (under HKLM\software\Microsoft\SMS\DP) will be changed
    to 20480.
    Or you can restart the SMS_SITE_Component_Manager service on SCCM site server
    to update the “reserved free space” value on remote DP.
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • New DVR Issues (First Run, Channel Switching, etc.)

    I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
    I recently switched to FIOS from RCN cable in New York.  I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
    1.  I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention.  Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording.  I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows.  I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR.  Is there a setting I can change that will force the DVR to choose one of the recording channels?
    2.  I setup all my recordings for "First Run" because I only want to see the new episodes.  One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day.  My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new".  Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR.  Any fixes?
    Thanks for the help.
    Solved!
    Go to Solution.

    I came from RCN about a year ago.  Fios is different in several ways, not all of them desirable.  Here are several ways to get--and fix--unwanted recordings from a series recording setup.
    Some general principles. 
    Saving changes.  When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes.  Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options.  Look at the Series Options window.  Look at the far right side.  There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes.  Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
    Default Series Options.  This is accessed  from [Menu]--DVR--Settings--Default Series Options.  This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options.  You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create.  Be sure to SAVE your changes.  This is what you will get when you select "Create Series Recording" from the Guide.  When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead.  Series Options can always be changed for any individual series set up later--but not for all series at once.
    Non-series recordings.  With Fios you have no directly available options for these.  With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series.  With Fios, your workarounds are to create a series with options for a single program, then delete the series later;  change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
    And now, to the unwanted repeats. 
    First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only".  If not, fix that and SAVE.  Then check you results by viewing the current options using the Series Manager app under the DVR menu.
    Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New".  It happens.  Set the series option "Air Time" to "Selected Time".  To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide.  Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored. 
    Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New".  These can be ignored in your series if you set the series option "Channel" to "Selected Channel".  Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes".  However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.  
    As for you missing two minutes,  I have sereral instances in which two programs start recording at the same time.  To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time.  You might have an older software version.  Newest is v.1.8.  Look at Menu--Settings--System Info.  Or, I might not have noticed the loss of minutes.  I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording.  There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them.  With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

  • Pension issue Mid Month Leaving

    Dear All,
    As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
    Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
    Please suggest.
    Ashwani

    Dear Jayanti,
    We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
    RT table for year 2010. DOL 26.04.2010
    /111 EPF Basis              01/2010                    0.00           8,750.00 
    /139 VPF Basis              01/2010                    0.00           8,750.00 
    /3F1 Ee PF contribution     01/2010                    0.00           1,050.00 
    /3F3 Er PF contribution     01/2010                    0.00             509.00 
    /3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00 
    /3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00 
    /3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25 
    /3FA PF basis for Ee contri 01/2010                    0.00           8,750.00 
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00 
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00 
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00 
    /3F4 Er Pension contributio 01/2010                    0.00             541.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
    /3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
    1BAS Basic Salary           01/2010                    0.00           8,750.00
    RT table for year 2009. DOL 27.10.2009
                                                                                    /111 EPF Basis              07/2009                    0.00           9,016.13
    /139 VPF Basis              07/2009                    0.00           9,016.13
    /3F1 Ee PF contribution     07/2009                    0.00           1,082.00
    /3F3 Er PF contribution     07/2009                    0.00             628.00
    /3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
    /3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
    /3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
    /3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00 
    /3FC Pension Basis for Er c 07/2009                    0.00           5,452.00 
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00 
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00 
    /3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13 
    1BAS Basic Salary           07/2009                    0.00           9,016.13 
    Now please suggest what to do. where is the problem  ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
    With Regards
    Ashwani

  • Open PO Analysis - BW report issue

    Hello Friends
    I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
    datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
    (Delivery completed).
    We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
    We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
    complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
    quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
    delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
    following:
    DOC_NUM     DOC_ITEM       DOCTYPE     COMP_DEL
    650000001       10     UB        X
    650000001       20     UB        X
    650000001       30     UB
    650000001       40     UB      
    When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
    system.
    Any help is appreciated in this regard.
    Thanks and Regards
    sampath

    Hi Priya and Reddy
       Thanks for your response.
                         Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                        I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                       In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
    Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
        41               6500000001            30                    11                            X           ---    
        42               6500000001            30                    11                            ---           X
        43               6500000001            30                    10                            X           ---
        44               6500000001            30                    10                            ---         ---
    (Here --- means blank)        
    Thanks and Regards
    sampath

  • HP LaserJet Enterprise 600 M602 driver issue

    Hello,
    I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
    Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
    Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
    Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
    Regards,
    Anatoly

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Windows 7 displays error message when exiting +cursor issue

    Two issues here. CS5 Phoshop on Wind 7 64 bit.
    Physical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 9577 MB
    Memory available to Photoshop: 10934 MB
    Memory used by Photoshop: 80 %
    Image tile size: 128K
    First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
    The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
    Any help will be gratefully accepted.
    Doug

    function(){return A.apply(null,[this].concat($A(arguments)))}
    doug87510 wrote:
    The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
    Well, that issue is simply a matter of hitting the Caps Lock key.  When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair.  That's a feature, not a bug.
    Glad to hear the 11.1 drivers are out.  I will download them and try them now myself.
    Regarding "Adobe QT" crashing...  QT brings to mind QuickTime, though that is Apple, not Adobe.  Do you have Apple QuickTime installed?
    Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
    -Noel

  • Issue in Creation of Periodicals for Contracts in CRM7.0

    Hello,
    I have a requirement to create Contracts in CRM7.0 system.
    And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
    Good part is Contract Order gets created, but onlywith Header Details.
    The issues i am facing --
    1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
    2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
        here what does 'Logical Key' field indicate? What should be passed here.
        What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
    3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are -  Partner, Product, terms/appointments, Status, LongTexts......
    Any help/inputs would be appreciated.
    Hope my problem is stated clearly ...
    --Regards
    Dedeepya

    Hi Anu,
    i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
    Ensure that you are passing a correct entry in INPUT_FIELDS structure.
    As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
    You can preset your break-points at :-
    1. FM - CRM_ORDER_MAINTAIN
    2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
    3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
    Regards
    Dedeepya C

  • Issue in creation of plant related data at receiving server using BD10

    Hi all,
    This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
    When i entered into Log-
    1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
    2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
    My segemnt is as follows-
    ZMATMAS05                      matmas05
           E1MARAM                        Master material general data (MARA)
               Z1KLART                        KLART----
    My extention
               E1MARA1                        Additional Fields for E1MARAM
               E1MAKTM                        Master material short texts (MAKT)
               E1MARCM                        Master material C segment (MARC)
                   Z1AUSPM                        E1AUSPMDistribution of Classification:----
    My extention
                   E1MARC1                        Additional Fields for E1MARCM
                   E1MARDM                        Master material warehouse/batch segment (MARD)
                   E1MFHMM                        Master material production resource/tool (MFHM)
                   E1MPGDM                        Master material product group
                   E1MPOPM                        Master material forecast parameter
                   E1MPRWM                        Master material forecast value
                   E1MVEGM                        Master material total consumption
                   E1MVEUM                        Master material unplanned consumption
                   E1MKALM                        Master material production version
               E1MARMM                        Master material units of measure (MARM)
               E1MBEWM                        Master material material valuation (MBEW)
               E1MLGNM                        Master material material data per warehouse number (MLGN)
               E1MVKEM                        Master material sales data (MVKE)
               E1MLANM                        Master material tax classification (MLAN)
               E1MTXHM                        Master material long text header
               E1CUCFG                        CU: Configuration data
           E1UPSLINK                      Reference from Object to Superior UPS
    Thanks.
    Edited by: sanu debu on Apr 27, 2009 7:10 PM

    CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
    'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
    D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

  • Issue in Creation of new Value Field in CO-PA

    Hi,
    I have a query in CO-PA Value Field Linking.
    In my Development Client,
    1. Created a New Value Field (No Transport Request Generated)
    2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
    However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
    Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
    Please Advise.
    Thanks in Advance,
    Safi

    Thanks Phaneendra for the response.
    The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
    Please Advise.
    Thanks,
    Safi

  • Issue of Free Goods

    Dear All
    I have some is my current assignment-Customer is buying some material say "A" want "B,C" as exclusive free goods
    is it possible to give two free at a time in same order ?
    I only know one exlusive free good can be give to one material with combination of customer ( Customer/Material)
    Looking for some inputs regarding the issue.
    Can you plz suggest me if there is any possiblities for BOM?
    Many Thanks
    Rakesh Naveen

    Dear Rakesh,
    Be informed that free goods is not currently supported in combination with material structures (e.g. product selection,     
    bills of material, variants with BOM explosion), see note 796926.   
    Determination of free goods is performed in include FV45PF0N_NATRAB_SELECTION and the check is hardcoded. You will have to modify the program to get that functionality, but be carfull that any modification won't be supported by SAP, see note 170183.                
    I hope it can help you.
    Ruy Castro

  • Issue in creation of control cycle

    Dear Gurus,
    During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
    I compared control cycle in a different ECC system where source information is appearing.
    How can make the screen appear in my ECC system.
    Please find the screenshots.
    Any pointers will be highly appreciated.
    This thread is further to the threads in Production Planning and LE/WM Forum. I could not resolve the issue with the threads.
    Hope that I will get any pointer in EWM forum.
    http://scn.sap.com/thread/3609441
    http://scn.sap.com/thread/3610822
    With Regards,
    Malay

    Hello Malay,
    Can first contact your ABAPer and ensure the bottom screen is not an Screen Enhancement?
    If it is a some custom development, your ABAPer can help you on the logic behind it.
    Else, Let us know.
    Regards,
    Sathish

  • Issue in Creation of XML file from ABAP data

    Hi,
    I need to create a XML file, but am not facing some issues in creation of XML file, the in the required format.
    The required format is
    -<Header1 1st field= u201CValueu201D 2nd field= u201CValueu201D>
       - <Header2 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 10 fields>
              <Header3 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
              <Header4  1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 4 fields/.>
               <Header5 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
          </Header2>
       </Header1>
    Iu2019m using the call transformation to convert ABAP data to XML file.
    So please anybody can help how to define XML structure in transaction XSLT_TOOL.
    And one more thing, here I need to put the condition to display the Header 3, Header 4, Header 5 values. If there is no record for a particular line item in header 3, 4 & 5, I donu2019t want to display full line items; this is only for Header 3, 4 & 5.
    Please help me in this to get it resolved.

    Hello,
    you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
    If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
    Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
    Regards Otto

Maybe you are looking for

  • A New Year, a New Challenge! Become the FIRST C# Guru of 2015!

    Happy New Year! "Guru 2014" is so 'last year'! The real glory is to be the first Guru of 2015! :D The birth of a new year, and a new hero? Or the stamp of authority from long established Guru leaders? The challenge is on, all eyes are watching, anyon

  • FRUSTRATED With Battery Life (or should I say lack of)  Incredible vs. Fascinate

    I got the Droid Incredible in January  (my first smartphone) and for the most part - I love it.  I HATE, however, the lack of battery life on this phone.   I have searched the forums and done pretty much all the suggestions from disabling background

  • PROBLEM IN JCHECKBOX FOCUS

    hi i don't get focus on checkbox.I need focus on the checkbox not on the text with it.what should i do?i sending my code please help me. public class SECOND extends javax.swing.JFrame { public SECOND() { initComponents(); setSize(500, 500); this.setD

  • Web Gallery -- FTP server

    how do I get a FTP server so that I can send the Web Gallery? When I tried to set up my gallery, it is asking for server information.

  • Duplicating photos in 08

    We have just installed iLife 08 on our three computers and are having fun playing with our pictures. However, we find that we can't duplicate photos. We like to work with a duplicate photo to crop, apply effects, etc. I know we can always "revert to