SMS transfer rejected error after 1st upgrade

Dear All,
Recently I have purchased a BB Z10 (LTS4) that I'm using outside of the US. The handset is unlocked but it's a Verizon version of Z10 (seems that recently Verizon has unlocked and sold some of its stock SIM free). When I 1st updated the OS (from 10.0.something to 10.1.0.2151) it stopped sending SMS (error: sending text is rejected). The problem is that my carrier doesn't support UTF-8 SMS, and in new update, it has switched to that and there's no way back.
Is there any chance that I can change the encoding to good old 7-bit?
I have checked the Engineering Screen and I didn't find anything
I'll appreciate your help

Hi,
Its the same with my phone - C7, i don't think there is a solution at the moment , we will have to wait for the the next ANNA update or maybe Nokia decided that it wasn't usefull and changed the code.
All the best

Similar Messages

Report giving error after 10g upgrade

We have a custom report which is erroring out after 10g upgrade. Following is the log file-->
**Starts**24-APR-2009 04:11:21
ORACLE error 3113 in FDPSTP
Cause: FDPSTP failed due to ORA-03113: end-of-file on communication channel
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P
APP-FND-01564: ORACLE error 1000 in AFPGRG
Cause: AFPGRG failed due to ORA-01000: maximum open cursors exceeded.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
Start of log messages from FND_FILE
End of log messages from FND_FILE
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P.A
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected to ORACLE
Contact your system administrator or support representative.
Shutting down Concurrent Manager : 24-APR-2009 04:11:51
ORA-01041: internal error. hostdef extension doesn't exist
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
hostdef extension doesn't exist
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
_ 3 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []
I already increased the cursors from 700 to 900
How to fix it?

Hi,
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []Refer to the lookup to get more details about this error.
Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
I already increased the cursors from 700 to 900
How to fix it?Is it possible to increase OPEN_CURSORS to a higher value? Enable trace on this concurrent program, and see if this collects more details about the error.
Regards,
Hussein

Finding: Incorrect SQL throws a random error (after 2005 upgrade)

Hi I thought that I would share an experience that we found after upgrading a system to 2005:
Due to the upgrade of SBO, one of our addons didn't work properly after upgrading it to 2005. Basically the code would break in random places (while stepping through it in the Development Environment).
After some time we identified the error was being thrown because a sql query we were using was incorrect due to the changing of the DB structure in the upgrade. The weird thing was that it didn't throw an error at rs.DoQuery(query) but actually would step into the recordset and then the addon would suddenly stop working - hence the reason it took a while to identify it was the sql causing the problem.
Anyway updating the sql fixed the problem, but if anyone else is finding strange behavior whilst trying to identify why an addon might stop working after an upgrade, you should check any sql being used is still correct....
Daniel

The first versions of SBO2005A SDK (PL00 to PL04) was the say the least VERY buggy... PL05,06 and now 07 seem to get things under control... Any rampup version of 2005 should at least get up PL05 ASAP... I didnt have many problem with the SQL, but "Server produced an error was a very common error".. my problem was primarily in matrixes (add/remove of lines), itemevent (pval internal COM error) and the dangerouse UserTable error due to currupted object in it....

Jco call rfc throws error after WAS upgrade sp15

Hi all.
When 2 days ago, our WAS engine version is sp14.
And we have one application using jco library to connect to SAP R/3. It works well.
After we upgrade WAS to sp15.
This function throws out the error.
Umrechnungsfaktor konnte nicht bestimmt werden
Is there anybody can help me ? Its very urgent !

Hi
A)Go to adming page http://<localhost>:<port> >>click Web Dynpro >>Content admin >> create, maintain, test Jco and also you can Test the SLD connection too
B)If you are using any JDBC driver,Check your JDBC driver is registered. or else you have register it
1. Start the Visual Admin tool
2. In the tab Cluster, open the node of the server you want to check.
3. Open the node Services under the server you want to check.
4. Click on the entry ClassLoader Viewer under Services. 5. The components are displayed in the right window. Open the node Applications in the right window.
6. Look for the entry sap.com/com.sapportals.connectors.database and click on it.
Under sap.com/com.sapportals.connectors.database, your JDBC driver should be available
Cheers
Jawahar Govindaraj
PS: Reward points

External command Cpic error - after V5R4M5 upgrade

Hi,
We are getting an error when we try to run external commands - Exception raised: PROGRAM_START_ERROR - The problem started after we upgraded the OS to V5R4M5. We are running R/3 45B. kernel patch 994.
SAPXPG JOBLOG: I see the following error MCH1210
QCPFMSG
MESSAGE-
Receiver value too small to hold result.
I could not find a new version of sapxpg for 4.5b_ext. I
Regards,
Brian

Never mind I found note 976837 that resolved the problem
Regards,
Brian

I'm getting errors after I upgraded to Mavericks

After I upgraded my Mac Pro to Mavericks, I've been having problems exporting files out of Final Cut Pro to any use.
The error message displays the following:
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
Has anyone seen similar error and found a way to fix it?

10.0.1 //
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.4 GHz
Number of Processors:          2
Total Number of Cores:          8
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          20 GB

Error after V6R1M0 upgrade

Hi
After OS upgrade V5R3 -> V6R1 we encounter problems with starting SAP. All the WORK process's dies.
ECC 7.0
Kernel patch 186
This is the log from one of the work process.
Loading DB library '/usr/sap/BND/SYS/exe/run/dbdb4slib.o' ...
ERROR => DlLoadLib: dlopen()= Could not load module /usr/sap/BND/SYS/exe/run/dbdb4slib.o.
itional errors occurred but are not reported. -> DLENOACCESS (2,No such file or directory) ¬dlux.c       314|
ERROR => Couldn't load library '/usr/sap/BND/SYS/exe/run/dbdb4slib.o'
I don't think PTF MF46062 is the issue here!
Can anyone help?
Best regards
Mads Hammer

Hi Rene
Yes, I run APYR3FIX as <SID>OFR. Here is a screen dump of the user.
User profile . . . . . . . . . . . . . . . :   BNDOFR
Special authority . . . . . . . . . . . . :   *SAVSYS
                                               *SECADM
Group profile . . . . . . . . . . . . . . :   BNDOWNER
Owner . . . . . . . . . . . . . . . . . . :   *GRPPRF
Group authority . . . . . . . . . . . . . :   *NONE
Group authority type . . . . . . . . . . . :   *PRIVATE
Supplemental groups . . . . . . . . . . . :   BNDGROUP
                                               R3OWNER
                                               R3GROUP
R3OWNER is a supplemental group.
Is there something wrong with user profile?
Best regards
Mads Hammer

SIM card registration error after SW upgrade

Hi
After I upgraded my Nokia 6110 Navigator to SW 4.22 I get insert SIM or SIM card registration error. It happends approx. once a week. Before I upgraded my mobile it never happend. Why?
BR / haav

This is often a problem with the SIM itself. That it started showing just when you did the firmware upgrade could be coincidence.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Password rejected immediately after Leopard upgrade

This problem has a solution posted WAAAAAY far down in the list of Leopard problems posted here in the Discussions, and the solution I'm giving here is easier than that one. So I hope it helps someone, since this seems to be a common (and completely avoidable) problem judging from discussions on other sites.
The problem is that Leopard refuses to recognize a valid Admin password immediately after upgrading. The problem is solved by installing the Keychain update, but how can you install that if it rejects your Admin password when you try to install using a password stored in... you guessed it... the Keychain?
The problem is solved in Apple Knowledge Base article #306840. It is very intricate and detailed, but not fundamentally difficult. In some other web discussions of the problem it supposedly affects passwords longer than 8 characters, but mine was exactly 8 characters, and the AKB 306840 says that it affects those 8 CHARACTERS OR MORE, not MORE THAN 8 CHARACTERS.
It only affects a password CREATED IN JAGUAR. My password was created in Jaguar on an iBook which was upgraded to Panther and then to Tiger. I then bought a Macbook Pro (with Tiger) and used the standard procedure to transfer all my settings to the Macbook. When I upgraded the Macbook to Leopard, I got the problem -- even though the Macbook had never touched a Jaguar in its entire life! (And probably wouldn't even RUN Jaguar, right?)
So I guess I had a "classic case" of this problem.
I called AppleCare and apparently got a fellow in India who took an hour and a half to solve the problem (after almost 30 minutes holding on the phone). After a few routine attempts which didn't work (including trying to reset the password using a boot from the installation CD), he finally started stepping me through the procedures outlined in the AKB #306840 (which I had printed out but hadn't tried yet; it was next on my list).
Oh and by the way before you do what 306840 tells you to do, make sure you know the Short Name by which you are secretly known in Unixland. My user name in AppleLand is "Jim W", which turns out to be "jimw" in Unixland. That's easy enough, but it's not "jim-w" or "jim_w" or "Jim+W" or jim%20w or some such. Look it up in your System Preferences (I forget which pane) before you proceed. The guy in India seemed to expect me to know what mine was and wasn't able to tell me what to use. Because I had printed out 306840 beforehand I was ready, but didn't tell him; I wanted to see if he would see the problem coming (he didn't). If I hadn't known the right thing to do, it would probably have extended the call another half hour, then gotten me referred to Level 2 support, another half hour with someone talking from Cupertino... Maybe.
It seems from other postings that this is a bug Apple knew about before releasing Leopard. It could have been prevented if Apple had simply told everyone with an 8-character (or longer) password to shorten it before updating, right? Then change it back (if you wish) after the installation? They would have saved having to pay their AppleCare person for 90 wasted minutes, and their telephone provider for 30 minutes of hold time on an 800 number.
Message was edited by: Host.

No, your problem sounds very different. The light blue screen is something I get for a few moments during the reboot process. If your password worked the second time, then what probably was happening (I'm no expert; this is just a guess) can happen in almost ANY update or install process. Understand, updating is a tricky thing; you have a new system to install and you need to be sure there is something to come back to if the power is interrupted at a crucial point, or whatever. I've been told that in very sensitive circumstances, what happens is that the new stuff is installed, the old stuff left behind (in case there's a power outage, etc.), and when you reboot to use the new stuff, the first thing that happens is that the system checks that there was no power outage. If everything is OK then it wipes the old stuff (it's safe now; the new stuff checks out) AND THEN REBOOTS AGAIN, since it has verified that the new installation will be able to handle things.
So my (unexpert) guess is that you logged in with your password, it was happy, it got rid of the old, and then it rebooted, giving you the Blue Screen Of Rebirth and leading to another (hopefully successful) login.

Can't make calls or sms on iphone 3gs after iOs5 upgrade?

I upgraded to iOS5 on my iphone 3gs and I am having major problems connecting to the 3g network. I can't make or recieve calls or sms, or log on to the internet over the 3g network. wifi works fine, but that doesn't help with the calls or the sms, and i can't always be on wifi for my emails. the phone worked fine before the upgrade.
i've restored the entire phone as a new phone, i've gone in to the apple store and had my phone looked at, they say there's nothing wrong with the hardware.
i live in Canada and my carrier is Rogers - of course when I call them for help they say it must be the phone not their network. they'd rather i buy a new phone and sign another 3 year contract
the only thing that seems to help is restoring network settings. immediately after doing that I can make calls, send and receive sms, and use the internet over 3g. but it only fixes it temporarily... after about 15 mins I'm back to the same problem. can't make or receive call etc.
anyone else having this same problem?
anyone know of a solution?

After 2 hours with Apple Support, which was great, we figured out the issue. 1-800-my-iphone. When I upgraded to iOS5 and started using the iCloud, I was unaware that my previous synching settings were still set to Yahoo.com where I had been sycning wirelessly in the past. So the Apple support tech showed me that I had multiple accounts in both Notes and Contacts. I had iPhone, iCloud, yahoo, Outlook accounts and my default settings on the iphone should have all been set to icloud. Syching was occuring, but not in icloud. It took a little manual conversion of some Notes and Contacts into the icloud folders in Outlook, but now everything works and I only display and use the iCloud accounts in Notes and Contacts. Apple realizes that this is an issue for those of us that were previously using Yahoo and equivalents for wireless synching and they provded my support free. Usually they charge $27. All is well.

WPC Content showing error after portal upgrade to 7.3

Hi All,
Recently we have upgraded our portal from 7.0 to 7.3.We have WPC contents on our portal its was fine till upgrade.After upgrade we are facing issues in all the WPC content.I reproduce the issue and checked the NWA log i could see the below logs.
com.sapportals.portal.prt.runtime.PortalRuntimeException: There is no portal component associated with the following context: pcd:<PCD PATH OF THE IVIEW>
So i thought of creating a new contents as mine was simple but when i navigate to the Web Page Composer ->Web site Management.I could see only the link not the content when i click.Below log i could see after this
cannot find bundle file or key for resource type wpc_site_root, use fallback
No mapping available for requested LayoutController with alias <WpcNavigationLayoutController>
com.sapportals.wcm.WcmException: Error: Archiving Service isn't available
at com.sapportals.wcm.rendering.uicommand.cm.UIAbstractApproveRejectArchivingCommand.setArchivingService(UIAbstractApproveRejectArchivingCommand.java:162)
at com.sapportals.wcm.rendering.uicommand.cm.UIAbstractApproveRejectArchivingCommand.<init>(UIAbstractApproveRejectArchivingCommand.java:42)
Kindly help me to solve the issue.
Naga

<< Do not post the same question across a number of forums >>

[Solved] Pacman error after incomplete upgrade

Hi
I was updating my archlinux when my X11 crashed (I was restarting it after tweaking my gnome 3) .
Trying to update after that indicated that my system was already uptodate. Installing anything indicated that pacman was running else to delete a file /var/lib/pacman/db.lck , which I did.
Now I can install but get these errors (for an example of re-installing pacman):
pacman -S pacman
warning: pacman-3.5.4-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/xulrunner-6.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/xulrunner-6.0-1/desc: No such file or directory
Targets (1): pacman-3.5.4-3
Total Download Size: 0.00 MB
Total Installed Size: 2.87 MB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) upgrading pacman [######################] 100%
ldconfig: file /usr/lib/xulrunner-6.0/libxul.so is truncated
Can any one help me? I am clueless. I know I made a mistake ... will be careful next time. Also I am sure that my system is not upto date, though pacman indicates it is.
Last edited by jlight2011 (2011-08-17 12:00:19)

No luck mate!
I get the following
pacman -Syy
:: Synchronizing package databases...
core 35.6K 1413.9K/s 00:00:00 [#######################################################] 100%
warning: resuming download of extra.db not possible; starting over
error: extra.db appears to be truncated: 485471/485689 bytes 176.0K 289.1K/s 00:00:01 [####################-----------------------------------] 37%
error: failed to update extra (failed to retrieve some files)
multilib 26.5K 204.0M/s 00:00:00 [#######################################################] 100%
I tried copying the extra.db file directly from my repo to the folder. But get the same error!

RE: Issues with iPhone 4 sync/charge/restore ERRORS after iOS6 upgrade

I saw a lot of people through the forum that experienced the exact issue I have and I spent 4 hours trying to resolve it myself with frantic research.
What helped me get my iPhone back:
This morning I received the message to upgrade my iphone 4 to the ios6 upgrade through my home internet. I accepted.
After the download went through my phone directed me to connect to itunes. I complied.
After connecting to itunes it informed me that my phone was in recovery mode and that I must restore my iphone.
Yet again, I complied.
After hitting restore and it going through the restore process, it instructed me of an error and could not complete restore. My computer refused to recognise my phone at all and said that I needed to enter my passcode.
My phone then continued to tell me to connect to itunes before it then went a step further and began restarting and just had the apple logo and/or loading circle for about 4 hours. No matter how long I held the home and power button on it just kept doing the same thing and to be honest, I was about to throw my phone out the window.
I researched different tips on here and other forums for hours and pressing all the reset buttons.
I downloaded itunes on a different computer and followed this tip
AjaxOfSalamis
Re: iOS 6 update attempt bricked iPhone 4s
19-Sep-2012 12:28 (in response to geoff566)
This is the proper procedure as per HT1808, Unable to update or restore
Plug the sync cable into your computer, but leave it disconnected from your iPhone
Hole the sleep/wake and home buttons down until the phone powers off completely
Set the phone down on a flat surface and hold the home button down
While holding the home button down, connect the sync cable to your iPhone
Continue holding the home button until you see the Sync to iTunes screen (iTunes logo & USB connector)
If you have iTunes running, you should see the alert box stating the iTunes has detected an iPhone in recovery mode
After many tries my phone then told me to connect to power as the battery was dead. After resetting it also had the same apple logo and loading screen.
Finally, itunes recognised my phone and went back into recovery mode. I restored my iphone with my fingers crossed. It downloaded the new iphone software update as well and before the restore was finished my phone reset once again and displayed an error message. I was infuriated and thought nothing would solve it.
Once again, I repeated the procedure until recovery mode was deteced and restored my iphone again.
This time it proceded a little further than before and successfully restored completely to factory settings and my phone finally switched on like it was a brand new phone.
I then set up my phone and connected it to my laptop and backed it up from there.
It was A LOT of fiddling around and just luck of repeating the same process over and over but this is what solved the issue that seems to be very common at the moment.
Any questions you're welcome to ask. I reassure you, I tried EVERY hold down button reset procedure and every time it failed and my computer absolutely was not registering my phone.
Hope this helps anyone.

Ajax, i tried the procedure you have given here and it worked first go. Thanks you legend.

SAPScript Form Layout Error after HRSP Upgrade

Hi SAP Experts,
I hope someone can shed some of your inputs in the error that we have in our SAPScript form.
A window in our SAPScript form does not display at all when a report is generated.
Funny thing is that we did not make any change to the said form and this error is consistent across all our SAP environments - Dev, QA and Prod.
This has started happening after we had the SAP HRSP upgrade last weekend.
We tried checking the form configuration and we cannot find anything wrong in it.
We tried to check for SAPScript versions but we found out that this is not available in SE71, unlike for programs in SE38.
Has anyone of you encountered this problem?
Hope I can get some expert inputs from the community on this issue.
Thanks!

Managed to find out the root cause of the SAPScript error. There was a new line that was added in the form layout after the HRSP upgrade. As to how it was added, it was unknown. But was able to resolve and fix the issue already.

Database connecting error after kernel upgrade

Hi Gurus
I am tring to upgrade my system kernel from 144 to 179, the system based on AIX 6.1 and DB2 B9.5.2,
After upgrading kernel SAP is not starting and I found database connection error because which Database is not activated. The startdb command completed successfully. I found I/O error while trying to make db connection.
I am also tring make SAP up by using old kernel (backup) but getting same error for backup kernel also. Now my system is totaly down.
So please help me out if you have any idea for this error in db2 database. The start db logs are as given below.
Wed Jan 21 08:56:07 GMT+05:30 2009
LOGFILE FOR STARTING DB6 (DB2 UDB)
Wed Jan 21 08:56:07 GMT+05:30 2009
checking required environment variables
DB2INSTANCE is >db2d11<
INSTHOME     is >/db2/db2d11<
DB2DBDFT     is >D11<
Wed Jan 21 08:56:07 GMT+05:30 2009
starting database manager
01/21/2009 08:56:07     0   0   SQL1026N The database manager is already active.
SQL1026N The database manager is already active.
Database Manager started
SQL1036C An I/O error occurred while accessing the database. SQLSTATE=58030
Activate database failed
Wed Jan 21 08:56:08 GMT+05:30 2009
R3trans connect to the database
R3trans check finished with return code: 12
R3trans connect failed
Notify your SAP/database administrator
Wed Jan 21 08:56:08 GMT+05:30 2009
/usr/sap/D11/SYS/exe/run/startdb: Terminating with error code 2
Please help me out.
Regards,
Jayesh.

Hi Jayesh,
from your description I would guess that the IO error is not related to the kernel change at all.
Please have a look at db2diag.log for the real cause of the problem.
You should be able to reproduce the error with
db2 activate database <dbname>
Regards
               Frank

SMS transfer rejected error after 1st upgrade

Similar Messages

Maybe you are looking for