SMS when payment or cheque data is entered in tcode

Hi Gurus,
I am working on a real state project where i need to send a sms to customer when he buys a home/flat when payment is entered in sap .
Request you to kindly guide me how should i proceed i searched many links on SDN but not able to intiate .
Regards.

HI u will have to configure the settingin SCOT transaction and configure for the Pager (SMS ) setting ,
take help of ur basis consultant for configurations .
Hope it will help ..!
Thnaks & Regards
Swapnil Kamble

Similar Messages

IMessage won't switch to SMS when out of the data/wifi range

my boyfriend has his imessage switched off sometimes, and when he is out of his home and has no wifi or data my messages still send as imessages and won't let me manually switch them to SMS so he never gets the messages. It says it delivers as an imessage even when he has imessage turned off so he never gets most of my messages but i can't turn my imessage off as i depend on it to talk to family out of the country. It all worked fine until i upgraded to iOS7 and since then it's been having this issue. Is there anyway to fix this?

He shouldn't keep turning his iMessage off and on. He should leave it on, so that when you attempt to contact him, it will register if he is not in an active data setting. When his iMessage is constantly being turned off and on, it is just confusing the server, as if it was still on or off. His best bet is for him to leave it on. If he turns it off, your phone will not know he is out of an active data connection. This is the same problem people have when they leave iMessage active and get a different brand of phone. It appears the iMessages are being received, when the device doesn't get iMessages. Also, you cannot manually switch between the two for him because of the way the iMessage server works. You have the option right after the iMessage sends to hold down on the message bubble and select send as text, but that would require you to know that he isn't in a data connection. If he keeps his activated, the server will know if he is out of a data connection, and your iMessage should be sent correctly.

Inconsistent error message when no class end date is entered

I sometimes am able to create a new class as "Normal" without entering an END DATE, but most times I get an error stating that the END DATE must be provided. Is this behavior normal?
What makes matters worse is that the end date field does NOT have a asterist next to it indicating that it is a required field, so users assume that they don't need to provide an END DATE until they get the error message.
Oracle 11i totally patched.

This is probably down to the type of class you are trying to create. Contact Oracle Support, they will be able to guide you.
Regards Anders Northeved

Please do not enter data for payment method Cheque papel error in IT0009

Hi Experts,
Whenever i try to maintain bank details infotype for payment type C(Check Papel),the system is throwing error "Please do not enter data for payment method Cheque papel". As per SAP std, I had deleted the entries for bank key, bank account and bank control key and maintained IBAN field in IT0009.While saving i am getting the error""Please do not enter data for payment method Cheque papel" and I couldn't save the record.
Then i deleted the entries for bank key, bank account and bank control key and IBAN field also in IT0009. While saving i am getting the error "Fill in all required entry fields". System behaves as if Iban a required field in IT0009. Our bank details infotype is country specific.We made it country
specific through feature P0009 and setting in table T588M.As per our conf setting IBAN field is optional. Even though IBAN field is optional, this field behaves as that of a mandatory field in IT0009.Iam facing this issues only for a few countries like Spain,Italy etc.For other counties i am able to change of create Bank details record for payment type C.
I have checked in Payment Methods by Country in FBZP (Payment Method Classification is set to Check and BANK DETAILS box is unchecked) but still no solution. Do i need to check in any other setting.
Please shed some light on this issue.Thanks in Advance.

Hi Jobish,
It's weird but I tried the below method and it works
Here's what you can try in case you do not want to enter the bank details for payment method 'C'..
Tcode FBZP - > payment methods by country - > select payment method as 'C' and make below changes (make a note of these changes as you will have to undo them after saving the table):
a. Payment method by classification - select bank transfer
b. Reqd master record specifications - check the bank details options and select the options which you want to be entered (a/c no required, IBAN rqd, SWIFT code rqd)
Save the table.
PA30- > Edit any record once again and save it.
Again go to FBZP and undo the above changes, i.e, revert to the original entries and again save the table.
Try editing the record now in PA30 and it allows to save. This is the second weird workaround that I have come across and still not sure why
After above workaround, I didn't get any error while maintaining the record, for this or any pernr.
See if it works.
Regards
Neha

How do I save a PDF as an excel file when the PDF is horizontal. Adobe tries to rotate the page, but the data is entered in an horizontal format.

How do I save a PDF as an excel file when the PDF is horizontal. Adobe tries to rotate the page, but the data is entered in an horizontal format.

Thanks for the quick reply. I figured out how to get the desired results by using tagging. For anyone who may reference this post in the future, I went to "Customize" in the top right corner of Adobe, then selected "Create new tool set...", looked under "accessiblity and found the "tag" option. Hit ok, tag is added to the toolbar. Then I highlighted the dataset in the PDF that was relevant to the output format, then clicked "tag", saved as spreadsheet. Sorry I can't provide more details on how tagging works or if there's a more elegant solution available, but I'm sure one's out there.

How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors

Hi SAP Gurus,
Could you help me on this, How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors.
Regards
Mohan

Hi Ramakrishnappa,
If you clear the invoice against payment, then the invoice clearing date would be payment document posting date.
Regards,
Mukthar

LOve Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?

Love Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?

Please do the following. 
#Click the Firefox button, go to '''Options '''| '''Options''' | '''Privacy'''. 
#In the dropdown menu at the top, change it to "'''Use custom settings for history'''" 
#Checkmark the option: "'''Remember Search and Form history'''". 
#Remove the checkmark from: "'''Clear history when Firefox closes'''".

HT201209 i cant register my debit card to apple id...........when i am tring to register........it shows your payment method was delclined please enter a valid payment method what should i do???

i cant register my debit card to apple id...........when i am tring to register........it shows your payment method was delclined please enter a valid payment method what should i do???

If it's a debit card then I don't think that they are still accepted as a valid payment method in all countries - from this page :
You may be able to use other payment types in your country, like debit and Maestro cards.
which implies that they are not accepted in all countries, and there have been a number of posts about them being declined.
Is the card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management.
Or do you have a credit card that you could use instead ?

IT0009: payment method "cheque" and dynamic actions

Hello,
I need your help on this issue.
I have looking for answers on the different posts but i didn't found any similar problems.
For a customer, i have to settle, in case of departure (leaving) action , the creation in background of an infotype 0009 from infotype 0000 with payment method 'C' - Cheque and the BEGDA equal to the first day of the month. It is a payroll need.
The dynamics action is easy to do but i have an error which makes appears the infotype. Actually, the information City is mandatory in SAP standard (?) in case of payment 'C' - Cheque.
I did the test and when i create infotype 0009, the name of the person, from infotype 0002 i guess, is put in the field but not the adress, city and postal code. If i select payment cheque, an errror alerts me that the city is mandatory for this payment method. If i put something, no problem, but i would like to automate it and retrieve data from IT0006. That is strange is when i delete the payee information (last and first name field) and validate the screen, no more error, even if i select payment cheque. And if i save and go back on the record, data from IT0006 (city, postal code and payee) have been automatically put in the infotype.
I would like to reproduce the same thing by the dynamic action but i can't access these fields because they are not part of the P0009 table but the Q0009 structure and i don't access it through dynamic action
Do you have some experiences to share on this topic ?
Thanks in advance.

hi
To replace a check or to create a check instead of a bank transfer, the system must be able to access the
correct payment method. The standard system contains predefined payment methods. However, you can
also specify your own values.
The standard system contains the following methods of payment:
- C (Check)
- D (Transfer)
- M (Check with manual assignment of check number)
Reward points

Cheque dates in F-58

Hi Experts,
An open AP invoice item dated Nov 02, 2009 needs to be paid. It was paid out via F-58 and Oct 30, 2009 has been entered as the posting date. From the user's point of view, its an audit issue because the cheque date is Oct 30 for an invoice that is yet to be created.
I know that this wouldn't have happened if it has been paid via F110 because it can be filtered out by APP. And I think its the behavior of SAP for this t-code. But I just want to be sure before I go back to the user. Can someone confirm if F-58 doesn't really check the posting dates of the payment transaction vs AP open item? Is there some customizing setting that I should have done? I have searched the SDN but there doesn't seem to be anything related to this.
Thanks to advise.

hi
in f-58 the user could have selected 'Additional Selection' --> others.
here you could have mentioned the documents for other criteria for e.g. 'posting date'.
this would have ensured that he gets only documents for the mentioned posting date range mentioned for Clearing.
thanks
eashwar

Error on invoice "specify payment period baseline date".

Hi Experts,
When I create ZMIRO, ZMIRO it keeps
asking for a baseline date which we have never had to do before
Payment terms filled blank, but teh system throughs error message "specify payment period baseline date".
I
Please help.
Thanks,

Dear,
System will want to calculate due for payment to vendor for this invoice it must know baseline date from which it should start calculating the due date. Generally baseline date is determined from payment term but it is empty in your case. Enter a payment term in vendor master so that system will default the baseline date from settings done in payment term.
Baseline date has to exist in the invoice document.
Regards,
Chintan Joshi

Discount cal by looking at 'Terms of Payment' and 'Baseline date'

Hi,
We have activated check box (Max. cash discount) in FBZP tcode for company code CUSA. As a result, when we run F110 (Vendor payment transaction), system is just looking at 'Terms of payment' and not 'Baseline date' and calculating discount FOR ALL VENDORS if the payment terms allow. However, there are some vendors where we need to look at both 'Terms of Payment' and 'Baseline date' and calculate discount.
How we can do this ? I checked up in F110 if there are any user exits so that we can put our own code for certain vendors, but I did not find any.
Any other solution for above.
Pl let us know.
Niranjan

Hi Sridhar,
Thanks for the help, but that will not help us. What you recommend is Alternative Baseline date. We cannot use that as we cannot ask users to enter all the terms of payment details while posting invoice. It is a waste of time. We want something that involves less time in entering data in SAP AND that will solve our current problem. I am looking for better solution.
Niranjan

Payments throug Cheque Issue

We are using transcation F-58 and FBZ5 for cheque Printing.Have already gone through SDN -Google .
How F-58 is linked to SAP-script and Print programe (name ). How to find custamized programes with F-58.
I excuted a programe YRFFOUS_C with parameters :
Program run date
Identification feature
Paying company code
Sending company code
Business area
House bank
Account ID
Check lot number
YRFFOUS_C: No records selected
or
Production run 27.05.2011 00001 has not yet been carried out
Thanks & Regards

Thanks sir.
Plant is in india. All cheques are issued with same scenarios and all are giving correct amount ( 100000.00).
But when , payment cheque for NEPAL it is giving (100.000,00)
It's only for one customer.
I cheked the user settings SU01 : 1,234,567.89
and also checked T005X table
India
Decimal point format   X
date format               1
Nepal
Decimal point format
date format               1
And in script there is no SET COUNTRY COMAND used.
Thanks & Regards

VF01 - Payment Schedule - All dates Proposed

Hi All,
Have a sales contract set-up with a peiodic billing plan (monthly arrears 24 months into the future).
When I run VF01 it proposes all items from the billing plan regardless of which dates I enter into the price date/service date and or billing date
If I entered a date representing the end of this month then I would expect only one payment to be proposed.
This works correctly for transaction VF04
Any Ideas?
Thanks
Steve

Steve,
In VF01-there is one button-Select Criteria....Make use of that...
Even in VF01 it will work fine...
REWARD IF U FINDS THIS AS USEFUL...
Regds
MM

Cheque Date

Hi Gurus,
I am making a payment on 2nd January with PDC of 5th January.
In which field we should enter cheque date?
Please revert asap.
Thank You
Regards,

Any transaction that you create in a prior posting period would require you to make that posting period Current.
Go to Admin > System Init.. > General Settings > Posting Periods..Highlight the posting period for March and click Set as Current

SMS when payment or cheque data is entered in tcode

Similar Messages

Maybe you are looking for