SMSY: Product version SAP R/3 ENTERPRISE 47X200 keeps returning

Hi,
Last year we have upgraded our SAP R/3 ENTERPRISE 47X200 system to SAP ERP 6.0.
For downloading enhancement packages we need the product version to be SAP ERP 6.0. In SMSY however, SAP R/3 ENTERPRISE 47X200 is still mentioned in the product versions list. We can delete it manually (not used in any logical component anymore) and are able to download enhancement packages fine at that moment. However, when we refresh SMSY by reading data from the SLD the SAP R/3 ENTERPRISE 47X200 product version returns in the list of product versions and we have to delete it manually again.
Any ideas?
Thanks,
Regards,
Bart Groot.

check the Note and one of the same threads
Note 1296512 - SMSY: Product version transferred from deleted system
Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

Similar Messages

SAP R/3 ENTERPRISE 47X200 IDES Version - Download Titles

Hi
Could any one please list out all required Download Titles for SAP R/3 ENTERPRISE 47X200 IDES Version.
Operating System : Microsoft Windows Server 2003 Enterprise Edition with SP1
RDBMS : Oracle 9.0
Will appreciate install instructions as well . (e-mail : [email protected])
Thanks in Advance
Veeresh Babu

cds you'll need...
- Oracle 9.2 NT 1/3 - Oracle 9.2 NT 3/3 (or appropriate DVDs)
- Oracle 9.2 Patch Set 7 WIN I386 32Bit/64bit
- DVD IDES SAP R3E 4.7x2.00 SR1 Export (4) 1 of 16 - 16 of 16
- Installation Master 6.20/6.40 Windows Server on IA32 32bit/64bit
- CD 6.40 Kernel ORACLE A,L,NT,NT/IA64
- SAP NW04 SR1 IGS
use the master cd/dvd to invoke <b>sapinst</b> and follow the instructions (plz check on any new cds as 47x200SR1 runs on kernel 6.40 there might be newer instructions found in sapnet!); oracle must be installed before starting sapinst...after that install the central instance followed by the database instance installation. the ides installation differs only slightly from a "normal" installation...just use the appropriate ides export cd/dvd...
plz read the installation guide and the relevant sapnotes carefully!!!
GreetZ, AH

Migration SAP R/3 Enterprise 47x200 from HPUX to Windows.

Hello,
Due to cost-reducing we have to migrate our SAP environment (SAP R/3 Enterprise 47x200 - Oracle 9.2.0.6.0) from HPUX 11 to Windows. For the moment it's a production system, but it will become a sleeping system that needs to be active for legal reasons. Is it still possible to get the required installation CD's for this SAP version ? If yes, who do I have to contact, if not, do you have other suggestions to do this migration. Thanks in advance for your help.
Regards
René Jongeneelen

> Is it still possible to get the required installation CD's for this SAP version ?
sure.
> If yes, who do I have to contact, if not, do you have other suggestions to do this migration.
Download them:
http://service.sap.com/swdc
but
keep in mind that you're doing a heterogeneous migration. This requires a certified migration consultant doing the migration on-site, otherwise you'll loose support for problems during the migration and for the target system.
Check http://service.sap.com/osdbmigration --> FAQ
Also keep in mind that Oracle 9.2 is (long) out of support, you should upgrade to 10g.
Markus

Product Version SAP ERP 6.0 Missing from solman 7.0

Hi All,
I have installed an ECC6 system and now i need to configure the solution manager and download the support packs
and xml file for EHP4 upgrade. I have done this before where in i configure the new system in SMSY as SAP ERP 6.0
and then configure maintenance optimizer and it gives me the option of Enhancement Package Installation.
However now in the current solution manager i dont see the product version SAP ERP 6.0 when im clicking
trying to creating a new system.
Our Solman version is 7.0 . I tried creating my new system under SAP ERP EHP as ehp version 1 and used maintenace
optimizer but it does not give me the option of EHP package installation. Can any one let me know how to address this
issue??
Regards,
Ershad Ahmed.

Hi,
Goto Tcode SMSY
1. Under Landscape Components --> Product Systems --> Select ERP --> Under that select your system ID and click on it,
Goto --> Header Data on your right side, change the Product Version to SAP ERP 6.0 and SAVE.
2. Goto System Groups and Logical Components --> Logical Components --> SAP ERP --> Create NEW Logical Component for your ECC system under this component and select Production version as SAP ERP 6.0 & assign ur system then SAVE.
3. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and REMOVE your ECC systen form the Solution and SAVE.
4. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and ADD your ECC system form the Solution and SAVE.
Regards
Kannan.K

Differences between Product Version SAP ERP 2005 and SAP ECC 6.0

Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
Jochen

SAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy

DUMP CRITICAL ERROR - SAP R/3 Enterprise

Hello Guys,
I am with the following error in my environment DEV, with the QAS environments and PRD does not happen the same mistake.
The error occurs when I try to access the table BSEG through transacão SE16. The Dump what happens is:
DBIF_RSQL_INVALID_REQUEST
shot dump DBIF_RSQL_INVALID_REQUEST when acessing in cluster table BSEG
Watching this error in the archives of trace dev_w1, I have the following log of error:
B Mon Aug 11 10:13:06 2008
B dbmyclu : c2_decompress (9.6740) : damaged 0. cluster record (pgs_total 0, bitem_total 0, max_cachecnt 32700)
B ***LOG BZW=> error BITT       on compression/decompression using c2_decompr
B **LOG BY0=> myCluster: RFBLG      myKey: 11028 37002303432008
B dbmyclu : c3_process_cluster (9.14819): received return code 2 from c2_decompress.
B dbmyclu : c3_fetch_next_pages_on_db (9.12297): received return code 2 from c3_process_cluster/c3_reread_single_cluster_on_db.
B dbmyclu : c3_get_next_multiple_cluster (9.13489): received return code 2 from c3_fetch_next_pages_on_db/c3_get_single_cluster (cid 0, lockstate 0, readmode 1, repeat 0).
B dbmyclu : c3_fetch_cluster_cursor (9.13711): received return code 2 out of getloop (cid 0, lockstate 0, readmode 1, readclu -10490, nextclu 0, clucheck 0).
B dbmyclu : c2_seqcount (9.10006): received return code 2 from c3_fetch_cluster_cursor (cid 0, readclu -10490).
B dbmyclu : c2_count (9.4512): received return code 2 from c2_seqcount (table BSEG      , upto 0, mod_cnt 5691071).
B dbmyclu : db_rclu2 (9.2761): received return code 2 from cluster access for fcode 257, table BSEG      , cluster RFBLG     .
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back ()
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Aug 11 10:13:06 2008
A
A ABAP Program /1BCDWB/DBBSEG                          .
A Source /1BCDWB/DBBSEG                           Line 692.
A Error Code DBIF_RSQL_INVALID_REQUEST.
A Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
A Function HandleRsqlErrors Line 779.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Invalid request. accessed..
Someone could help me with this error?
My environment is as follows:
Product Version SAP R / 3 Enterprise 47X110
AIX Operating System
Database DB2/UDB
kernel release 640 / patch 155
Someone could help me with this error?
Thanks

please check if this OSS .946659
I am also looking for a note as we got the same error message.
See if it helps or let me know your solution if you fix it.
Good luck..
Amit Asthana

License Key For SAP R/3 Enterprise Demo Version

Hello Basis Gurus,
I have installed SAP R/3 Enterprise Demo Version in my Notebook.
When i am trying to login using User ID: SAPUSER getting an error message that ":Logon refused (valid license not installed)"
SAP R/3 Details:
Component Version: SAP R/3 Enterprise
Installation Number: INITIAL
License expiration: ..----
Active Hardware Key: C1129820057
System Number: System No. Empty
When i am trying to install the License Key at Command Prompt getting the error message that
Specify your license key:
LICENSE_KEY   1...5....0....5....0...4
LICENSE_KEY =
Wrong license data specified
>        Check the specified license data for:
>        - typing errors
>        - upper / lower characters
>        - same values as noted on license fax
How can i get the correct LICENSE_KEY for this demo version for the above hard ware key.
Please advice urgently..

to get hardware key:
saplicense -get
to get license key:
https://websmp106.sap-ag.de/licensekeys

Change the Product version from ECC to ERP 6.0

Hello Experts
I am planning to apply EHP4 on my Development ECC system. In line with the the suggestion from guide "How to install SAP Enhancement Package 4 for SAP ERP 6.0" system I am supposed to define my ECC system with leading product version ERP 6.0.
My Ecc system is currently defined with Product version SAP ECC 6.0.
As per the above guide and also suggestion from "Note 1344564 - Maintenance Optimizer: Check system landscape" which says-
"In particular for a system of the product SAP ERP, assign the product version of SAP ERP, not SAP ECC."
I am supposed to change the leading product version to ERP 6.0.
Now with the current definition of system with product version SAP ECC 6.0, it is being used in a logical component. In order to change this I need to delete the associated logical component. The problem is -this logical component is being used in more than one Project definition that has huge documentation associated with them.
My question -
will the deletion of current logical component affect my documentation in any way?
How can I change the product version from SAP ECC 6.0 to SAP ERP 6.0 without affecting the current setup?
Regards
Dhiraj

Hello Warren,
Thanks for the suggestion.
I have already taken care of all the suggested notes in the master note that you suggested. I am able to generate the XML file for other solution defined in my system. In those I have my ECC system defined purely as ERP 6.0 system. I am not able to make out why its not generating the XML for this solution.
Regards
Dhiraj

Which SAP Product version to assign to a Logical Component in SMSY (SOLMAN)

Dear SAP Colleagues,
In our SAP environment, we do have 2 versions of ERP systems :
1. CON - SIF - CDP systems are 'SAP ERP Central Component 5.0' product version.
2. CDD - CDT - CDP systems are 'SAP ECC 6.0' product version.
Question :
When I want to assign these systems to a Z_LOGICAL_COMPONENTS, which product version do I have to choose ?
Example for CON - SIF - CDP systems :
1. They are 'SAP ERP Central Component 5.0' product version.
2. In SMSY in our SOLMAN system, logical component are created using
'SAP ECC 5.0' product version.
Example for CDD - CDT - CDP systems :
1. They are 'SAP ECC 6.0' product version.
2. In SMSY in our SOLMAN system, logical component are created using
'SAP ECC 6.0' product version.
Question :
What about 'SAP ERP 2004' and 'SAP ERP 6.0' product version ?
In which case must I use this product version to assign CON-SIF-CPS
or CDD-CDT-CDP to new Logical components ?
Are they OSS Note or any matrix which give me the right product version to choose ?
I have heard that 'SAP ECC x.x' product version should not used any longer ?
Thanks
Best regards
P.C

Hi,
Read the following document, the mapping for systems and component versions is described in here:
https://websmp202.sap-ag.de/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf
For ECC 6.0 you should select ERP 6.0
regards,
Jaap

SAP ERP6 product version missing in SMSY for EHP4 upgrade Solman 7

Hello
I am trying to install Ehp 4 but when i try to create the new system as SAP ERP6 in solution manager (SMSY )but product version is missing ?
iam now stuck any ideas will be welcome as i need to get the stack.xml inorder to proceed with EHP installer

Hi,
Check below notes before proceeding with EHP download in solman,sap has recommaned to apply these notes when we tried to download EHP,
Must Implemeted
1238929 MOPZ: Solution Is Not Selected in Work Center
1240389 Maintenance optimizer transaction with incorrect Java host
1243197 MOPZ: Add Caption for Product and Stack of Stack Delta XML
1246549 Status were reset to step 1 after Download Basket approval
1247550 present all avaliable systems in mopz step 1
1250781 SMSY: Error for Java system components from the SLD
1255219 Java systems w/o ABAP instance in maintenance optimizer
1262239 SMSY: Database name *LOCAL
1273095 SMSY: Incorrect database server (Java)
1306173 Maintenance Optimizer: Enhancement Package Stacks
1308152 MOPZ: Check configuration for stack delta XML generation
1311841 Maintenance Optimizer: Rename stack delta index file
1319083 Maintenance Optimizer: Technical corrections
1326123 MOpz: Error "Update product data in Solution Manager"
1357565 MOpz: Maintain a system where EHP is installed
1402615 Translate hostname in Mopz to lower case
1407905 MOpz: Error when withdrawing in step 4
Cannot be implemented, but manual steps must be performed.
1141296 Solution Manager: ERP product data missing
1165587 Maintenance Optimizer: Enhancement Package stack selection
1277035 Solution Manager: EHP4 product data missing
Between what is your present stack level of solman
Regards
Uday

SLD to SMSY synchronization - Which product version do we have to choose ?

Hello,
We do have a CPP system running on SAP ECC 6.0 version.
1. In SLD, we do have the list of all "Software Components" used in CDP.
We do not have the "PRODUCT VERSION" of the managed system.
2. With job SAP_SLD_DATA_COLLECT (RZ70), all data are sent from CDP (managed system) to SLD.
3. With LANDSCAPE FETCH job, all data are synchronized between SLD and SMSY.
Now, how can we choose the right "PRODUCT VERSION" to set in SMSY ?
As far as there is not "PRODUCT VERSION" defined in SLD, do we have to set manually a PRODUCT in SMSY ?
Is there any guide or OSS Notes which describe, step by step, the full workflow process synchronization
from (1) Managed System to (2) SLD to (3) SMSY ?
Thanks
Best regards
PC

Hi,
As I have observed, when the data sync happens between SLD and SM system, the product versions are also assigned.
Sometimes, the product assigned through SLD sync may not be correct or may be irrelevant to your scenario,
In that case, you should always manually edit and assign the correct product version in SMSY, to avoid any conflicts arising in further setup of EWA, SMD setup etc.
For ECC 6.0, you can goto SMSY>systems>search for SAP ECC-->your system CPP/CDP should already be present under SAP ECC through SLD landscape fetch job.
Select that system, and in the header data tab u can see the Installed product versions.
There you can always change the relevant products for your systems.
Hope this helps.

System shows wrong product version in smsy and SMD Setup Wizard

Hi
We have a SOLMAN EHP1 SPS22 running. The Satellite systems are correctly registered in SLD, also the SOLMAN Fetchjobs is running successfully.
I wanted to run the SMD Setup for a NetWeaver ABAP system, when I click in the Setup Wizard on the System the following link is under Managed Products apears: [NOT DIAGNOSTICS RELEVANT] .
By clicking the link you get the products to be managed, but i only two products are for selection.
SAP ERP 6.0 and SAP FSCM 6.0.
In smys checked the assignment in Systems --> <SID> in the Header Tab I clicked Installed Product version. The List in the Pulldown menu in "Product" are the same as above: SAP ERP 6.0 and SAP FSCM 6.0.
I tried to assign the product manually with no luck. Running the Solman_setup for the Diagnostics did not solve the problem either.
Thanks for your help
Murat

Hi Stuart,
In SolMan, goto t-code SMSY-> Product Definitions-> Select any product.
On the right hand side, click on the button "System Roles"-> Click "Select Product".
Now activate the relevant product as required by clicking on the "Active" checkbox.
Hope this helps!
Regards,
Rinkal

How can we create Versions for Products in SAP CRM

Hi All,
We want use Product Versions in our CRM IC Webclient. We want to be able to select a product and then have a list of versions to pick from. Can anyone tell me if they have configured Versions for Products in their SAP CRM system. If yes, then how did you go about it.
Thanks,
Ramesh Nallabelli

Hi Arup and Shanthala,
Thanks for the prompt responses. Appreciate your help. We want to create Product versions like this: Product: Windows OS Version: 95, 98, XP, Vista, 7, etc.
When I try to create a configurable product, using the Configuration tab, to create or use a product model I see an error message: PME installation with errors The long text is: The environment variable PME_HOME that includes the PME application has to exist locally in order to start the PME from CRM.
This indicates the configuration of IPC in our CRM system. This is something that we have not undertaken so far.
When I use the Poduct Variants tab to create a product variant for a configurable product, I can't edit here. This view opens in a display only mode. After reading some more about this, It looks like variant configuration needs to be used in tandem with ERP variant configuration. There might also be a need to recreate this in the Java configuration engine. We are going to create these products in CRM only, so this might not work for us.
Regards,
Ramesh

SAP ECC 6.0 Software component Versions or Product versions in XI (SLD)

Hi All,
please, let me know the solution for this problem,
Curently we r using PI 7.0 SPS 14 kernal Version 179.
Unable to find out SAP ECC 6.0 Software component Version or (Product version) in SAP XI 7.0 SLD.
how to solve this issue....
Advace thanks.
Mahesh

Hi Volkar,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh

"Only assign one SAP NetWeaver product version to product system"

Greetings,
Somehow, after upgrading my PI system from NW 7.11 to NW 7.4, the SAP-XICONS component was left at the lower version. Everything else was upgraded and SUM didn't complain about this component. The component was present in the stack.xml file and the SCA was available. Yet somehow it was missed.
Now I am unable to use SUM to update the component. There seems to be no way to get the LMDB to reflect the actual versions of this system and have Maintenance Optimizer function.
After I assigned everything in the LMDB, the Verification Check says "Only assign one SAP NetWeaver product version to product system". And then MOPZ gives errors such as: "Wrong Netweaver product version found SAP NETWEAVER 7.4" and "Multiple Netweaver Product Version were found".
However, if I remove the assignment of 7.11, MOPZ is still unable to calculate the queue. It even gives the same errors.
How can I fix this? Is there some other way to generate the stack or get SUM to upgrade the component?

The root cause was MOPZ marking the component incorrectly in the stack XML.
The resolution was to use telnet to 5xx08 to manually deploy the SAP-XICONS archive.

SMSY: Product version SAP R/3 ENTERPRISE 47X200 keeps returning

Similar Messages

Maybe you are looking for